[ncl-talk] Issue with Latitude-Time Plot
Amit Kumar
amitkumar.777 at hotmail.com
Tue Aug 28 22:23:44 MDT 2018
Hi Adam,
Still the tickmarks are of same height (Plot attached).
Also when in explicit mode I'm giving res at tmXBValues = (/1,10,20,30,40,50,60,70,80,90,100,110,120/), then also it is giving me error that x axis data out of range, going to default.
However, when I'm plotting for only 30 days, I'm getting the desired plot (attached), that too without using any tickmark resources i.e. res at tm as you can see in the script attached in 1st message.
Regards
Amit
________________________________
From: Adam Phillips <asphilli at ucar.edu>
Sent: Tuesday, August 28, 2018 10:02 PM
To: Amit Kumar
Cc: Rick Brownrigg; Ncl-talk
Subject: Re: [ncl-talk] Issue with Latitude-Time Plot
Hi Amit,
Try this:
res at tmXBMode = "Explicit"
res at tmXBValues = var&time
res at tmXBLabels = ispan(0,115,5)
res at tmXBLabelFontHeightF = 0.01
res at tmXBMinorValues = ispan(0,115,1)
Adam
On Tue, Aug 28, 2018 at 8:26 AM Amit Kumar <amitkumar.777 at hotmail.com<mailto:amitkumar.777 at hotmail.com>> wrote:
Dear All,
When I'm following as mentioned in example 2, then no labels are getting printed on x axis.
Regards
Amit
Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: Rick Brownrigg <brownrig at ucar.edu<mailto:brownrig at ucar.edu>>
Sent: Tuesday, August 28, 2018 6:23:43 PM
To: Amit Kumar
Subject: Re: [ncl-talk] Issue with Latitude-Time Plot
You might look at "tmXBMinorValues " at
http://ncl.ucar.edu/Document/Graphics/Resources/tm.shtml
and example #2 at
http://ncl.ucar.edu/Applications/tickmarks.shtml
for dealing with minor tickmarks when using tmXBMode = "Explicit"
On Tue, Aug 28, 2018 at 12:37 AM, Amit Kumar <amitkumar.777 at hotmail.com<mailto:amitkumar.777 at hotmail.com>> wrote:
Hi All,
I've made following changes as suggested by Adam in the script,
res at tmXBMode = "Explicit"
res at tmXBValues = var&time
res at tmXBLabels = ispan(0,115,1)
res at tmXBLabelFontHeightF = 0.01
res at tmXBLabelStride = 10
Now as it can be seen from the image that all the labels are major labels, is there a way to define all other tickmarks except for which label is mentioned as minor tickmarks.
Regards
Amit
________________________________
From: Adam Phillips <asphilli at ucar.edu<mailto:asphilli at ucar.edu>>
Sent: Monday, August 27, 2018 9:51 PM
To: Amit Kumar
Cc: Rick Brownrigg; Ncl-talk
Subject: Re: [ncl-talk] Issue with Latitude-Time Plot
Hi Amit,
You can override the behavior of the bottom x-axis tick mark labels by setting:
res at tmXBMode = "Explicit"
res at tmXBValues = OLR_DAY&time
res at tmXBLabels = ispan(1,115,1)
See tickmarks example #2 here (bottom panel coding):
http://www.ncl.ucar.edu/Applications/tickmarks.shtml#ex2
Tick marks - University Corporation for Atmospheric Research<http://www.ncl.ucar.edu/Applications/tickmarks.shtml#ex2>
www.ncl.ucar.edu<http://www.ncl.ucar.edu>
NCL graphics examples page. Describes various tick mark resources and ways to manage the tick marks.
If you have further questions please post them to ncl-talk.
Adam
On Mon, Aug 27, 2018 at 9:51 AM Amit Kumar <amitkumar.777 at hotmail.com<mailto:amitkumar.777 at hotmail.com>> wrote:
Dear Rick,
Actually these 115 time stamps are for each day. I have concatenated to these individual days into one using cdo. I want to plot time at x axis which will vary from 1 to 115 indicating each day, so that the plot can be ploted as latitude vs time and variation of olr can be seen over latitude and time . It is on the same lines as the example for sst anamoly in latitude vs time section in ncl examples.
Regards
Amit
Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: Rick Brownrigg <brownrig at ucar.edu<mailto:brownrig at ucar.edu>>
Sent: Monday, August 27, 2018 8:47:24 PM
To: Amit Kumar
Subject: Re: [ncl-talk] Issue with Latitude-Time Plot
Hi Amit,
Offhand, given the time variable's coordinate range:
Variable: time
Type: double
Total Size: 115 values
920 bytes
Number of Dimensions: 1
Dimensions and sizes: [ 115 <time | unlimited> ]
Chunking Info: [ 524288 <time> ]
Coordinates:
time: [9159840..9334080]
I'd the plot looks about what I'd expect. In what way do you think the time values are incorrect?
Rick
On Mon, Aug 27, 2018 at 6:02 AM, Amit Kumar <amitkumar.777 at hotmail.com<mailto:amitkumar.777 at hotmail.com>> wrote:
Dear All,
I'm trying to plot Latitude vs Time Plot. It is working fine when I've 30 time instances, but for greater then that (i.e. 115 time steps) the plot is sowing different values in x-axis (time).
I'm not able to workout why this is happening? I'm attaching the output and my ncl script.
==================================================================================================
var = a->OLR_DLY
dims = dimsizes(var)
print(dims)
lat = a->lat
lon = a->lon
time = a->time
lon100E = ind(lon.eq.100.) ; subscript at 90E
latS = -20.
latN = 40.
shov = var(lon|lon100E:lon100E,{lat|latS:latN},time|:)
dims = dimsizes(shov) ; shov=3D array=(1,31,127)
sdemo = onedtond(ndtooned(shov), (/dims(1),dims(2)/) )
sdemo!0 = "lat"
sdemo!1 = "time"
sdemo&lat = lat({lat|latS:latN})
sdemo&time= time
sdemo = smth9 (sdemo,0.5, 0.25, False) ; 2D smoother
gtPat = 17 ; stiple
ltPat = 3 ; hatch
;*************************
; plotting parameters
;*************************
wks = gsn_open_wks ("png", "Monsoon_2017_lat_time_100_1" ) ; send graphics to PNG file
res = True ; plot mods desired
res at gsnDraw = False ; don't draw yet
res at gsnFrame = False ; don't advance frame yet
res at tiMainString = "Daily OLR variation at 100E" ; title
res at vpXF = 0.12 ; default is 0.2 change aspect
res at vpYF = 0.8 ; default is 0.8 ration
res at vpHeightF = 0.4 ; default is 0.6
res at vpWidthF = 0.8 ; default is 0.6
res at cnLevelSelectionMode = "ManualLevels" ; manual levels
res at cnMinLevelValF = 150. ; min level
res at cnMaxLevelValF = 330. ; max level
res at cnLevelSpacingF = 10 ; contour spacing
res at cnFillOn = True ; color on
res at lbLabelStride = 4 ; every other label
res at lbOrientation = "Horizontal" ; vertical label bar
res at pmLabelBarOrthogonalPosF = -0.04 ; move label bar closer to axis
res at cnLinesOn = False ; turn off contour lines
res at cnFillPalette = "GMT_wysiwyg" ; set color map
plot = gsn_csm_lat_time(wks, sdemo, res )
;opt = True
;opt at gsnShadeFillType = "pattern"
;opt at gsnShadeLow = ltPat
;opt at gsnShadeHigh = gtPat
;plot = gsn_contour_shade(plot, -0.69, 0.25, opt)
;plot = ZeroLineContour (plot)
draw (plot) ; draw the contour object
frame (wks) ; advance frame
end
==================================================================================================
%%%%%%%%%%%%%%%%%%%
################################
dimensions:
lon = 1400
lat = 1400
time = 115 // unlimited
chunk dimensions:
lon = 1400
variables:
Variable: lon
Type: double
Total Size: 1400 values
11200 bytes
Number of Dimensions: 1
Dimensions and sizes: [ 1400 <lon> ]
Coordinates:
lon: [40..109.95]
Number of Attributes: 4
standard_name : longitude
long_name : longitude
units : degrees_east
axis : X
Variable: lat
Type: double
Total Size: 1400 values
11200 bytes
Number of Dimensions: 1
Dimensions and sizes: [ 1400 <lat> ]
Coordinates:
lat: [-20..49.95]
Number of Attributes: 4
standard_name : latitude
long_name : latitude
units : degrees_north
axis : Y
Variable: time
Type: double
Total Size: 115 values
920 bytes
Number of Dimensions: 1
Dimensions and sizes: [ 115 <time | unlimited> ]
Chunking Info: [ 524288 <time> ]
Coordinates:
time: [9159840..9334080]
Number of Attributes: 4
standard_name : time
units : minutes since 2000-1-1 00:00:00
calendar : standard
axis : T
Variable: OLR_DLY
Type: float
Total Size: 225400000 values
901600000 bytes
Number of Dimensions: 3
Dimensions and sizes: [ 115 <time | unlimited> x 1400 <lat> x 1400 <lon> ]
Chunking Info: [ 1 <time> x 1 <lat> x 1400 <lon> ]
Coordinates:
time: [9159840..9334080]
lat: [-20..49.95]
lon: [40..109.95]
Number of Attributes: 5
standard_name : Outgoing Longwave Radiation
long_name : Out Longwave Radiation(Daily)
units : W.m-2
_FillValue : -999
missing_value : -999
########################################
Thanks in advance.
Regards
Amit
_______________________________________________
ncl-talk mailing list
ncl-talk at ucar.edu<mailto:ncl-talk at ucar.edu>
List instructions, subscriber options, unsubscribe:
http://mailman.ucar.edu/mailman/listinfo/ncl-talk
_______________________________________________
ncl-talk mailing list
ncl-talk at ucar.edu<mailto:ncl-talk at ucar.edu>
List instructions, subscriber options, unsubscribe:
http://mailman.ucar.edu/mailman/listinfo/ncl-talk
--
Adam Phillips
Associate Scientist, Climate and Global Dynamics Laboratory, NCAR
www.cgd.ucar.edu/staff/asphilli/<http://www.cgd.ucar.edu/staff/asphilli/> 303-497-1726
<http://www.cgd.ucar.edu/staff/asphilli>
_______________________________________________
ncl-talk mailing list
ncl-talk at ucar.edu<mailto:ncl-talk at ucar.edu>
List instructions, subscriber options, unsubscribe:
http://mailman.ucar.edu/mailman/listinfo/ncl-talk
--
Adam Phillips
Associate Scientist, Climate and Global Dynamics Laboratory, NCAR
www.cgd.ucar.edu/staff/asphilli/<http://www.cgd.ucar.edu/staff/asphilli/> 303-497-1726
<http://www.cgd.ucar.edu/staff/asphilli>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.ucar.edu/pipermail/ncl-talk/attachments/20180829/322801b0/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Monsoon_2017_lat_time_100_12.png
Type: image/png
Size: 128376 bytes
Desc: Monsoon_2017_lat_time_100_12.png
URL: <http://mailman.ucar.edu/pipermail/ncl-talk/attachments/20180829/322801b0/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lat_time_100.png
Type: image/png
Size: 81652 bytes
Desc: lat_time_100.png
URL: <http://mailman.ucar.edu/pipermail/ncl-talk/attachments/20180829/322801b0/attachment-0003.png>
More information about the ncl-talk
mailing list