[Met_help] [rt.rap.ucar.edu #93547] History for why there are no CNT type results in the point2stat results
Minna Win via RT
met_help at ucar.edu
Thu Apr 2 09:52:57 MDT 2020
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
Dear Mr. or Mrs.,
Thanks a lot in advance for your help on my another problem.
I just found there were no CNT output in my point2stat verification
results.
Now, my focus is first to find the forecast bias and variance, and, hence,
I think CNT is what I need . Right?
If that is the case, what is the reason that there are no such output ?
I searched the conf files and found :
^^
# Message types, if all message types are to be returned, leave this empty,
# otherwise indicate the message types of interest.
POINT_STAT_MESSAGE_TYPE =
~
Seems all line types (including CNT) should be given.
Your help will be appreciated.
Ting
______________________________
Ting Lei
IMSG at NOAA/NWS/NCEP/EMC
5830 University Research Ct., Cubicle 2765
College Park, MD 20740
Ting.Lei at noaa.gov <Joe.Smith at noaa.gov>
301-683-3624
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: why there are no CNT type results in the point2stat results
From: Minna Win
Time: Thu Dec 19 14:12:33 2019
Hello Ting,
It looks like your point-stat output isn't including the CNT
statistics you were expecting.
You are correct that when you leave the MESSAGE_TYPE set to empty
string, you are requesting all *message* types to be considered for
evaluation.
In your MET config file, have you set in your output_flag, CNT=BOTH?
e.g. output_flag = {
fho = NONE;
...
cnt = BOTH;
...
}
so that the continuous statistics will be output? My apologies if you
already did that, I'm just trying to eliminate the most obvious
culprit at this point.
Regards,
Minna
------------------------------------------------
Subject: why there are no CNT type results in the point2stat results
From: Ting Lei - NOAA Affiliate
Time: Thu Dec 19 15:40:51 2019
Hi, Minna,
Thank you so much!
However, would you please tell me, for metplus, in which config file
I can
find that parameter :output_flag ? I failed to find it in my metplus
directory.
Regards,
Ting
______________________________
Ting Lei
IMSG at NOAA/NWS/NCEP/EMC
5830 University Research Ct., Cubicle 2765
College Park, MD 20740
Ting.Lei at noaa.gov <Joe.Smith at noaa.gov>
301-683-3624
On Thu, Dec 19, 2019 at 4:12 PM Minna Win via RT <met_help at ucar.edu>
wrote:
> Hello Ting,
>
> It looks like your point-stat output isn't including the CNT
statistics
> you were expecting.
>
> You are correct that when you leave the MESSAGE_TYPE set to empty
string,
> you are requesting all *message* types to be considered for
evaluation.
>
> In your MET config file, have you set in your output_flag,
CNT=BOTH?
>
> e.g. output_flag = {
> fho = NONE;
> ...
> cnt = BOTH;
> ...
> }
>
> so that the continuous statistics will be output? My apologies if
you
> already did that, I'm just trying to eliminate the most obvious
culprit at
> this point.
>
> Regards,
> Minna
>
>
------------------------------------------------
Subject: why there are no CNT type results in the point2stat results
From: Ting Lei - NOAA Affiliate
Time: Thu Dec 19 16:01:10 2019
Mina,
Please disregard my previous email. I think I have found it.
Thank you so much.
Ting
______________________________
Ting Lei
IMSG at NOAA/NWS/NCEP/EMC
5830 University Research Ct., Cubicle 2765
College Park, MD 20740
Ting.Lei at noaa.gov <Joe.Smith at noaa.gov>
301-683-3624
On Thu, Dec 19, 2019 at 5:40 PM Ting Lei - NOAA Affiliate
<ting.lei at noaa.gov>
wrote:
> Hi, Minna,
> Thank you so much!
> However, would you please tell me, for metplus, in which config
file I
> can find that parameter :output_flag ? I failed to find it in my
metplus
> directory.
> Regards,
> Ting
>
> ______________________________
>
> Ting Lei
>
> IMSG at NOAA/NWS/NCEP/EMC
>
> 5830 University Research Ct., Cubicle 2765
>
> College Park, MD 20740
>
> Ting.Lei at noaa.gov <Joe.Smith at noaa.gov>
>
> 301-683-3624
>
>
> On Thu, Dec 19, 2019 at 4:12 PM Minna Win via RT <met_help at ucar.edu>
> wrote:
>
>> Hello Ting,
>>
>> It looks like your point-stat output isn't including the CNT
statistics
>> you were expecting.
>>
>> You are correct that when you leave the MESSAGE_TYPE set to empty
string,
>> you are requesting all *message* types to be considered for
evaluation.
>>
>> In your MET config file, have you set in your output_flag,
CNT=BOTH?
>>
>> e.g. output_flag = {
>> fho = NONE;
>> ...
>> cnt = BOTH;
>> ...
>> }
>>
>> so that the continuous statistics will be output? My apologies if
you
>> already did that, I'm just trying to eliminate the most obvious
culprit at
>> this point.
>>
>> Regards,
>> Minna
>>
>>
------------------------------------------------
Subject: why there are no CNT type results in the point2stat results
From: Ting Lei - NOAA Affiliate
Time: Thu Dec 19 16:20:34 2019
Minna,
Yes, it resolved my problem.
Thank you!
Ting
______________________________
Ting Lei
IMSG at NOAA/NWS/NCEP/EMC
5830 University Research Ct., Cubicle 2765
College Park, MD 20740
Ting.Lei at noaa.gov <Joe.Smith at noaa.gov>
301-683-3624
On Thu, Dec 19, 2019 at 6:00 PM Ting Lei - NOAA Affiliate
<ting.lei at noaa.gov>
wrote:
> Mina,
> Please disregard my previous email. I think I have found it.
> Thank you so much.
> Ting
>
> ______________________________
>
> Ting Lei
>
> IMSG at NOAA/NWS/NCEP/EMC
>
> 5830 University Research Ct., Cubicle 2765
>
> College Park, MD 20740
>
> Ting.Lei at noaa.gov <Joe.Smith at noaa.gov>
>
> 301-683-3624
>
>
> On Thu, Dec 19, 2019 at 5:40 PM Ting Lei - NOAA Affiliate <
> ting.lei at noaa.gov> wrote:
>
>> Hi, Minna,
>> Thank you so much!
>> However, would you please tell me, for metplus, in which config
file I
>> can find that parameter :output_flag ? I failed to find it in my
metplus
>> directory.
>> Regards,
>> Ting
>>
>> ______________________________
>>
>> Ting Lei
>>
>> IMSG at NOAA/NWS/NCEP/EMC
>>
>> 5830 University Research Ct., Cubicle 2765
>>
>> College Park, MD 20740
>>
>> Ting.Lei at noaa.gov <Joe.Smith at noaa.gov>
>>
>> 301-683-3624
>>
>>
>> On Thu, Dec 19, 2019 at 4:12 PM Minna Win via RT
<met_help at ucar.edu>
>> wrote:
>>
>>> Hello Ting,
>>>
>>> It looks like your point-stat output isn't including the CNT
statistics
>>> you were expecting.
>>>
>>> You are correct that when you leave the MESSAGE_TYPE set to empty
>>> string, you are requesting all *message* types to be considered
for
>>> evaluation.
>>>
>>> In your MET config file, have you set in your output_flag,
CNT=BOTH?
>>>
>>> e.g. output_flag = {
>>> fho = NONE;
>>> ...
>>> cnt = BOTH;
>>> ...
>>> }
>>>
>>> so that the continuous statistics will be output? My apologies if
you
>>> already did that, I'm just trying to eliminate the most obvious
culprit at
>>> this point.
>>>
>>> Regards,
>>> Minna
>>>
>>>
------------------------------------------------
Subject: why there are no CNT type results in the point2stat results
From: Minna Win
Time: Fri Dec 20 09:32:53 2019
Hi Ting,
That's great! Thank you for keeping us informed . I'll close this
ticket.
Please don't hesitate to create a MET help ticket for any future
issues/questions.
Regards,
Minna
---------------
Minna Win
National Center for Atmospheric Research
Developmental Testbed Center
Phone: 303-497-8423
Fax: 303-497-8401
On Thu, Dec 19, 2019 at 4:20 PM Ting Lei - NOAA Affiliate via RT <
met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=93547 >
>
> Minna,
> Yes, it resolved my problem.
> Thank you!
> Ting
>
> ______________________________
>
> Ting Lei
>
> IMSG at NOAA/NWS/NCEP/EMC
>
> 5830 University Research Ct., Cubicle 2765
>
> College Park, MD 20740
>
> Ting.Lei at noaa.gov <Joe.Smith at noaa.gov>
>
> 301-683-3624
>
>
> On Thu, Dec 19, 2019 at 6:00 PM Ting Lei - NOAA Affiliate <
> ting.lei at noaa.gov>
> wrote:
>
> > Mina,
> > Please disregard my previous email. I think I have found it.
> > Thank you so much.
> > Ting
> >
> > ______________________________
> >
> > Ting Lei
> >
> > IMSG at NOAA/NWS/NCEP/EMC
> >
> > 5830 University Research Ct., Cubicle 2765
> >
> > College Park, MD 20740
> >
> > Ting.Lei at noaa.gov <Joe.Smith at noaa.gov>
> >
> > 301-683-3624
> >
> >
> > On Thu, Dec 19, 2019 at 5:40 PM Ting Lei - NOAA Affiliate <
> > ting.lei at noaa.gov> wrote:
> >
> >> Hi, Minna,
> >> Thank you so much!
> >> However, would you please tell me, for metplus, in which config
file I
> >> can find that parameter :output_flag ? I failed to find it in my
> metplus
> >> directory.
> >> Regards,
> >> Ting
> >>
> >> ______________________________
> >>
> >> Ting Lei
> >>
> >> IMSG at NOAA/NWS/NCEP/EMC
> >>
> >> 5830 University Research Ct., Cubicle 2765
> >>
> >> College Park, MD 20740
> >>
> >> Ting.Lei at noaa.gov <Joe.Smith at noaa.gov>
> >>
> >> 301-683-3624
> >>
> >>
> >> On Thu, Dec 19, 2019 at 4:12 PM Minna Win via RT
<met_help at ucar.edu>
> >> wrote:
> >>
> >>> Hello Ting,
> >>>
> >>> It looks like your point-stat output isn't including the CNT
statistics
> >>> you were expecting.
> >>>
> >>> You are correct that when you leave the MESSAGE_TYPE set to
empty
> >>> string, you are requesting all *message* types to be considered
for
> >>> evaluation.
> >>>
> >>> In your MET config file, have you set in your output_flag,
CNT=BOTH?
> >>>
> >>> e.g. output_flag = {
> >>> fho = NONE;
> >>> ...
> >>> cnt = BOTH;
> >>> ...
> >>> }
> >>>
> >>> so that the continuous statistics will be output? My apologies
if you
> >>> already did that, I'm just trying to eliminate the most obvious
> culprit at
> >>> this point.
> >>>
> >>> Regards,
> >>> Minna
> >>>
> >>>
>
>
------------------------------------------------
More information about the Met_help
mailing list