[Met_help] [rt.rap.ucar.edu #83910] History for FV3 and MET
John Halley Gotway via RT
met_help at ucar.edu
Wed Jul 10 17:04:10 MDT 2019
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
Hello,
is MET equipped to handle FV3 evaluation? Maybe you also know if UPP
can convert FV3 nectdf output to GRIB.
Thanks,
Mariusz
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: FV3 and MET
From: Tara Jensen
Time: Thu Feb 01 17:39:25 2018
Mariusz,
MET is equipped to compute all scores computed by EMC for FV3
evaluation
(other than vector wind statistics, which is being added this month).
The
Global Model Test Bed is using UPP to process FV3 but what I heard to
at
the Unified Forecast System (UFS) meeting at EMC yesterday was that
UPP
support is "nearly complete'. So I think it's "use at your own risk"
and
feed back problems you have via the UPP helpdesk. I'll forward you an
email
from one of the GMTB scientists that was recently sent to Hazardous
Weather
Tesbed staff. Based on the emails I'm seeing going back and forth,
UPP may
be struggling with the FV3 grids HWT contributors are setting up.
Look for
a direct forward from me in a few minutes.
Cheers, Tara
On Thu, Feb 1, 2018 at 10:47 AM, Mariusz Pagowski via RT
<met_help at ucar.edu>
wrote:
>
> Thu Feb 01 10:47:15 2018: Request 83910 was acted upon.
> Transaction: Ticket created by Mariusz.Pagowski at noaa.gov
> Queue: met_help
> Subject: FV3 and MET
> Owner: Nobody
> Requestors: Mariusz.Pagowski at noaa.gov
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=83910 >
>
>
> Hello,
> is MET equipped to handle FV3 evaluation? Maybe you also know if UPP
> can convert FV3 nectdf output to GRIB.
> Thanks,
> Mariusz
>
>
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tara Jensen
Project Manager II
NCAR RAL and DTC
PO Box 3000, Boulder, Colorado 80307 USA
+1 303-497-8479 jensen at ucar.edu
------------------------------------------------
Subject: FV3 and MET
From: Tara Jensen
Time: Thu Feb 01 19:23:35 2018
Mariusz,
As per your question sent to the UPP help desk ticket I opened:
does it mean that MET can take FV3 netcdf output, forget winds,
without it
being converted to GRIB by UPP?
Answer: MET has not be tested reading FV3 netcdf output directly so we
can't say for sure. Based on our experience with WRF netcdf, which
all we
can read is the WRF p-interp netcdf, I'd guess there will likely be
some
modification to either MET or the netcdf files that would be needed
but we
don't know how extensive until we try. I also think it would be very
beneficial to the community to figure it out once our helpdesk
resources
are replenished. We are running quite low until beginning of April.
Hope this helps,
Cheers, Tara
On Thu, Feb 1, 2018 at 5:39 PM, The RT System itself via RT <
met_help at ucar.edu> wrote:
>
> Thu Feb 01 17:39:25 2018: Request 83910 was acted upon.
> Transaction: Given to jensen (Tara Jensen) by RT_System
> Queue: met_help
> Subject: FV3 and MET
> Owner: jensen
> Requestors: Mariusz.Pagowski at noaa.gov
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=83910 >
>
>
> This transaction appears to have no content
>
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tara Jensen
Project Manager II
NCAR RAL and DTC
PO Box 3000, Boulder, Colorado 80307 USA
+1 303-497-8479 jensen at ucar.edu
------------------------------------------------
Subject: FV3 and MET
From: Mariusz Pagowski
Time: Thu Feb 01 19:30:07 2018
Tara,
so it looks like UPP conversion of FV3 to GRIB and subsequent
processing
with MET should be possible, even if not now, in the near future
(fall).
Right?
Mariusz
On Thu, Feb 1, 2018 at 7:23 PM, Tara Jensen via RT <met_help at ucar.edu>
wrote:
> Mariusz,
>
> As per your question sent to the UPP help desk ticket I opened:
> does it mean that MET can take FV3 netcdf output, forget winds,
without it
> being converted to GRIB by UPP?
>
> Answer: MET has not be tested reading FV3 netcdf output directly so
we
> can't say for sure. Based on our experience with WRF netcdf, which
all we
> can read is the WRF p-interp netcdf, I'd guess there will likely be
some
> modification to either MET or the netcdf files that would be needed
but we
> don't know how extensive until we try. I also think it would be very
> beneficial to the community to figure it out once our helpdesk
resources
> are replenished. We are running quite low until beginning of April.
>
> Hope this helps,
> Cheers, Tara
>
> On Thu, Feb 1, 2018 at 5:39 PM, The RT System itself via RT <
> met_help at ucar.edu> wrote:
>
> >
> > Thu Feb 01 17:39:25 2018: Request 83910 was acted upon.
> > Transaction: Given to jensen (Tara Jensen) by RT_System
> > Queue: met_help
> > Subject: FV3 and MET
> > Owner: jensen
> > Requestors: Mariusz.Pagowski at noaa.gov
> > Status: new
> > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=83910 >
> >
> >
> > This transaction appears to have no content
> >
>
>
>
> --
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Tara Jensen
> Project Manager II
> NCAR RAL and DTC
> PO Box 3000, Boulder, Colorado 80307 USA
> +1 303-497-8479 jensen at ucar.edu
>
>
------------------------------------------------
Subject: FV3 and MET
From: Mariusz Pagowski
Time: Thu Feb 01 19:30:54 2018
Tara,
so it looks like UPP conversion of FV3 to GRIB and subsequent
processing
with MET should be possible, even if not now, in the near future
(fall).
Right?
Mariusz
On Thu, Feb 1, 2018 at 7:23 PM, Tara Jensen via RT <met_help at ucar.edu>
wrote:
> Mariusz,
>
> As per your question sent to the UPP help desk ticket I opened:
> does it mean that MET can take FV3 netcdf output, forget winds,
without it
> being converted to GRIB by UPP?
>
> Answer: MET has not be tested reading FV3 netcdf output directly so
we
> can't say for sure. Based on our experience with WRF netcdf, which
all we
> can read is the WRF p-interp netcdf, I'd guess there will likely be
some
> modification to either MET or the netcdf files that would be needed
but we
> don't know how extensive until we try. I also think it would be very
> beneficial to the community to figure it out once our helpdesk
resources
> are replenished. We are running quite low until beginning of April.
>
> Hope this helps,
> Cheers, Tara
>
> On Thu, Feb 1, 2018 at 5:39 PM, The RT System itself via RT <
> met_help at ucar.edu> wrote:
>
> >
> > Thu Feb 01 17:39:25 2018: Request 83910 was acted upon.
> > Transaction: Given to jensen (Tara Jensen) by RT_System
> > Queue: met_help
> > Subject: FV3 and MET
> > Owner: jensen
> > Requestors: Mariusz.Pagowski at noaa.gov
> > Status: new
> > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=83910 >
> >
> >
> > This transaction appears to have no content
> >
>
>
>
> --
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Tara Jensen
> Project Manager II
> NCAR RAL and DTC
> PO Box 3000, Boulder, Colorado 80307 USA
> +1 303-497-8479 jensen at ucar.edu
>
>
------------------------------------------------
Subject: FV3 and MET
From: Tara Jensen
Time: Thu Feb 01 19:32:55 2018
Mariusz,
Yes. I think it's fair to assume the capability will be availability
by
then.
Cheers, Tara
On Feb 1, 2018 9:30 PM, "Mariusz Pagowski via RT" <met_help at ucar.edu>
wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=83910 >
>
> Tara,
> so it looks like UPP conversion of FV3 to GRIB and subsequent
processing
> with MET should be possible, even if not now, in the near future
(fall).
> Right?
> Mariusz
>
> On Thu, Feb 1, 2018 at 7:23 PM, Tara Jensen via RT
<met_help at ucar.edu>
> wrote:
>
> > Mariusz,
> >
> > As per your question sent to the UPP help desk ticket I opened:
> > does it mean that MET can take FV3 netcdf output, forget winds,
without
> it
> > being converted to GRIB by UPP?
> >
> > Answer: MET has not be tested reading FV3 netcdf output directly
so we
> > can't say for sure. Based on our experience with WRF netcdf,
which all
> we
> > can read is the WRF p-interp netcdf, I'd guess there will likely
be some
> > modification to either MET or the netcdf files that would be
needed but
> we
> > don't know how extensive until we try. I also think it would be
very
> > beneficial to the community to figure it out once our helpdesk
resources
> > are replenished. We are running quite low until beginning of
April.
> >
> > Hope this helps,
> > Cheers, Tara
> >
> > On Thu, Feb 1, 2018 at 5:39 PM, The RT System itself via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > Thu Feb 01 17:39:25 2018: Request 83910 was acted upon.
> > > Transaction: Given to jensen (Tara Jensen) by RT_System
> > > Queue: met_help
> > > Subject: FV3 and MET
> > > Owner: jensen
> > > Requestors: Mariusz.Pagowski at noaa.gov
> > > Status: new
> > > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=83910
> >
> > >
> > >
> > > This transaction appears to have no content
> > >
> >
> >
> >
> > --
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > Tara Jensen
> > Project Manager II
> > NCAR RAL and DTC
> > PO Box 3000, Boulder, Colorado 80307 USA
> > +1 303-497-8479 jensen at ucar.edu
> >
> >
>
>
------------------------------------------------
More information about the Met_help
mailing list