[Met_help] [rt.rap.ucar.edu #80752] History for out of memory error
Julie Prestopnik via RT
met_help at ucar.edu
Fri Jun 9 10:22:58 MDT 2017
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
Hello there,
Not sure what the issue is here. We had to switch from Gyre to Tide as the
development machine, so this is my first time configuring MET on Tide.
Worked great on Gyre.
128.518 + point_stat AWIP3D04.tm00 prepda.nc.2017060416 <(201)%20706-0416>
/meso/save/Perry.Shafran/verif/nwtest/parm/PointStatConfig -v 2
DEBUG 1: Default Config File: /awc/noscrub/Julie.Prestopnik/
met/6.0/share/met/config/PointStatConfig_default
DEBUG 1: User Config File: /meso/save/Perry.Shafran/verif/nwtest/parm/
PointStatConfig
ERROR :
ERROR : out of memory! Exiting!
ERROR :
I had this problem before and you said to be sure that I am pointing to
Julie.Prestopnik's modulefiles. I am pretty sure I am doing so but maybe I
am pointing elsewhere in a certain .bashrc file somewhere. I thought I
checked all of those files.
Perry
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: out of memory error
From: Julie Prestopnik
Time: Mon Jun 05 13:54:03 2017
Hi Perry. I'm sorry to see that you are experiencing problems running
MET
on tide. IBM was able to complete the install of MET on tide and
gyre.
So, give this a try in a fresh shell and see if it works for you:
- module use /usrx/local/dev/modulefiles
- module load met
Some users have experienced problems due to conflicting modules they
already have loaded, but unfortunately, we haven't been able to find
the
culprit. If you run into segfaults or other unexpected behavior, try
running "module purge" first, and then rerun the module commands
above.
Please try that out and let me know how it goes.
Julie
On Mon, Jun 5, 2017 at 1:14 PM, perry.shafran at noaa.gov via RT <
met_help at ucar.edu> wrote:
>
> Mon Jun 05 13:14:26 2017: Request 80752 was acted upon.
> Transaction: Ticket created by perry.shafran at noaa.gov
> Queue: met_help
> Subject: out of memory error
> Owner: Nobody
> Requestors: perry.shafran at noaa.gov
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=80752 >
>
>
> Hello there,
>
> Not sure what the issue is here. We had to switch from Gyre to Tide
as the
> development machine, so this is my first time configuring MET on
Tide.
> Worked great on Gyre.
>
> 128.518 + point_stat AWIP3D04.tm00 prepda.nc.2017060416
<(201)%20706-0416>
> /meso/save/Perry.Shafran/verif/nwtest/parm/PointStatConfig -v 2
> DEBUG 1: Default Config File: /awc/noscrub/Julie.Prestopnik/
> met/6.0/share/met/config/PointStatConfig_default
> DEBUG 1: User Config File:
/meso/save/Perry.Shafran/verif/nwtest/parm/
> PointStatConfig
> ERROR :
> ERROR : out of memory! Exiting!
> ERROR :
>
> I had this problem before and you said to be sure that I am pointing
to
> Julie.Prestopnik's modulefiles. I am pretty sure I am doing so but
maybe I
> am pointing elsewhere in a certain .bashrc file somewhere. I
thought I
> checked all of those files.
>
> Perry
>
>
------------------------------------------------
Subject: out of memory error
From: perry.shafran at noaa.gov
Time: Mon Jun 05 13:59:17 2017
Hi, Julie,
Thanks! I'm sure that the issue is somewhere in one of my login files
-
I'm not entirely sure which ones that run on login. Maybe I should
try the
usrx modulefile?
Perry
On Mon, Jun 5, 2017 at 3:54 PM, Julie Prestopnik via RT
<met_help at ucar.edu>
wrote:
> Hi Perry. I'm sorry to see that you are experiencing problems
running MET
> on tide. IBM was able to complete the install of MET on tide and
gyre.
> So, give this a try in a fresh shell and see if it works for you:
>
> - module use /usrx/local/dev/modulefiles
> - module load met
>
> Some users have experienced problems due to conflicting modules they
> already have loaded, but unfortunately, we haven't been able to find
the
> culprit. If you run into segfaults or other unexpected behavior,
try
> running "module purge" first, and then rerun the module commands
above.
>
> Please try that out and let me know how it goes.
>
> Julie
>
>
>
>
> On Mon, Jun 5, 2017 at 1:14 PM, perry.shafran at noaa.gov via RT <
> met_help at ucar.edu> wrote:
>
> >
> > Mon Jun 05 13:14:26 2017: Request 80752 was acted upon.
> > Transaction: Ticket created by perry.shafran at noaa.gov
> > Queue: met_help
> > Subject: out of memory error
> > Owner: Nobody
> > Requestors: perry.shafran at noaa.gov
> > Status: new
> > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=80752 >
> >
> >
> > Hello there,
> >
> > Not sure what the issue is here. We had to switch from Gyre to
Tide as
> the
> > development machine, so this is my first time configuring MET on
Tide.
> > Worked great on Gyre.
> >
> > 128.518 + point_stat AWIP3D04.tm00 prepda.nc.2017060416
> <(201)%20706-0416>
> > /meso/save/Perry.Shafran/verif/nwtest/parm/PointStatConfig -v 2
> > DEBUG 1: Default Config File: /awc/noscrub/Julie.Prestopnik/
> > met/6.0/share/met/config/PointStatConfig_default
> > DEBUG 1: User Config File:
/meso/save/Perry.Shafran/verif/nwtest/parm/
> > PointStatConfig
> > ERROR :
> > ERROR : out of memory! Exiting!
> > ERROR :
> >
> > I had this problem before and you said to be sure that I am
pointing to
> > Julie.Prestopnik's modulefiles. I am pretty sure I am doing so
but
> maybe I
> > am pointing elsewhere in a certain .bashrc file somewhere. I
thought I
> > checked all of those files.
> >
> > Perry
> >
> >
>
>
------------------------------------------------
Subject: out of memory error
From: Julie Prestopnik
Time: Mon Jun 05 14:17:28 2017
Yes, please try using met-6.0 installed by IBM, by starting in a fresh
shell and running:
- module use /usrx/local/dev/modulefiles
- module load met
You may still encounter a problem. Some users have experienced
problems
due to conflicting modules they already have loaded, but
unfortunately, we
haven't been able to find the culprit. If you run into segfaults or
other
unexpected behavior, try running "module purge" first, and then rerun
the
module commands above.
Please try that out and let me know how it goes.
Thanks,
Julie
On Mon, Jun 5, 2017 at 1:59 PM, perry.shafran at noaa.gov via RT <
met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=80752 >
>
> Hi, Julie,
>
> Thanks! I'm sure that the issue is somewhere in one of my login
files -
> I'm not entirely sure which ones that run on login. Maybe I should
try the
> usrx modulefile?
>
> Perry
>
> On Mon, Jun 5, 2017 at 3:54 PM, Julie Prestopnik via RT
<met_help at ucar.edu
> >
> wrote:
>
> > Hi Perry. I'm sorry to see that you are experiencing problems
running
> MET
> > on tide. IBM was able to complete the install of MET on tide and
gyre.
> > So, give this a try in a fresh shell and see if it works for you:
> >
> > - module use /usrx/local/dev/modulefiles
> > - module load met
> >
> > Some users have experienced problems due to conflicting modules
they
> > already have loaded, but unfortunately, we haven't been able to
find the
> > culprit. If you run into segfaults or other unexpected behavior,
try
> > running "module purge" first, and then rerun the module commands
above.
> >
> > Please try that out and let me know how it goes.
> >
> > Julie
> >
> >
> >
> >
> > On Mon, Jun 5, 2017 at 1:14 PM, perry.shafran at noaa.gov via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > Mon Jun 05 13:14:26 2017: Request 80752 was acted upon.
> > > Transaction: Ticket created by perry.shafran at noaa.gov
> > > Queue: met_help
> > > Subject: out of memory error
> > > Owner: Nobody
> > > Requestors: perry.shafran at noaa.gov
> > > Status: new
> > > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=80752
> >
> > >
> > >
> > > Hello there,
> > >
> > > Not sure what the issue is here. We had to switch from Gyre to
Tide as
> > the
> > > development machine, so this is my first time configuring MET on
Tide.
> > > Worked great on Gyre.
> > >
> > > 128.518 + point_stat AWIP3D04.tm00 prepda.nc.2017060416
> > <(201)%20706-0416>
> > > /meso/save/Perry.Shafran/verif/nwtest/parm/PointStatConfig -v 2
> > > DEBUG 1: Default Config File: /awc/noscrub/Julie.Prestopnik/
> > > met/6.0/share/met/config/PointStatConfig_default
> > > DEBUG 1: User Config File:
/meso/save/Perry.Shafran/verif/nwtest/parm/
> > > PointStatConfig
> > > ERROR :
> > > ERROR : out of memory! Exiting!
> > > ERROR :
> > >
> > > I had this problem before and you said to be sure that I am
pointing to
> > > Julie.Prestopnik's modulefiles. I am pretty sure I am doing so
but
> > maybe I
> > > am pointing elsewhere in a certain .bashrc file somewhere. I
thought I
> > > checked all of those files.
> > >
> > > Perry
> > >
> > >
> >
> >
>
>
------------------------------------------------
More information about the Met_help
mailing list