[Met_help] [rt.rap.ucar.edu #56395] History for MODE error: no exact match found
Randy Bullock via RT
met_help at ucar.edu
Wed May 16 10:41:36 MDT 2012
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
Hello,
I have been using the MET package now for a week. I am mostly interested in the MODE-tool to perform a validation on my simulated precipitation fields. These precipitation fields are generated while using the RAMS Regional Atmospheric Model. I have created a GRIB file using GrADS and have been able to decode this GRIB file correctly. Next to that, I have also created a GRIB file with an interpolated field of rainfall observations. Both files only have one timestep. I try to use the MODE tool on the GRIB files (attached to this e-mail) but I am stuck with the following error:
bin/mode ../rain.grb ../rainstat.grb tutorial/config/MODEConfig_default
DEBUG 1: Default Config File: /home/maat009/METv3.1/data/config/MODEConfig_default
DEBUG 1: Match Config File: tutorial/config/MODEConfig_default
DEBUG 1: Merge Config File: tutorial/config/MODEConfig_default
DEBUG 1: Forecast File: ../rain.grb
DEBUG 1: Observation File: ../rainstat.grb
WARNING:
WARNING: MetGrib1DataFile::data_plane() -> No exact match found for VarInfo "61/L1" in GRIB file "../rain.grb".
WARNING:
ERROR :
ERROR : process_fcst_obs_files() -> can't get data from file "../rain.grb"
Could you let me know what is going wrong here? And if possible help me further...
Kind regards,
Herbert ter Maat
Researcher Land-Atmosphere Interactions
ESS-CC (Earth System Science-Climate Change)
Alterra, Wageningen-UR
PO Box 47, 6700 AA Wageningen, The Netherlands
Visiting address: Droevendaalsesteeg 3 (building 100), Wageningen
tel: +31 317 486429
fax: +31 317 419000
email: herbert.termaat at wur.nl<mailto:herbert.termaat at wur.nl>
research: http://www.alterra.wur.nl/ESS-CC<http://www.alterra.wur.nl/UK/research/Specialisation+Water+and+Climate/ESSCC>
education: http://www.ess.wur.nl<http://www.ess.wur.nl/>
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: Re: [rt.rap.ucar.edu #56395] MODE error: no exact match found
From: Paul Oldenburg
Time: Fri May 11 10:29:43 2012
Herbert,
Can you please send me your model data, observation data and MODE
configuration file? There are instructions for
uploading data to our FTP site here:
http://www.dtcenter.org/met/users/support/met_help.php#ftp. One
suggestion that I
have is to try using different fcst_field settings in your MODE
configuration file:
fcst_field = "61/RNN" // where NN is the record number of the field
of interest in your model grib file
fcst_field = "61/L0"
You may have to go through a similar process with the obs_field
setting as well. This problem is usually solved through
trial and error. Please let me know if you have any questions.
Paul
On 05/11/2012 10:21 AM, Maat, Herbert ter via RT wrote:
>
> Fri May 11 10:21:39 2012: Request 56395 was acted upon.
> Transaction: Ticket created by Herbert.termaat at wur.nl
> Queue: met_help
> Subject: MODE error: no exact match found
> Owner: Nobody
> Requestors: Herbert.termaat at wur.nl
> Status: new
> Ticket<URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>
>
> Hello,
>
> I have been using the MET package now for a week. I am mostly
interested in the MODE-tool to perform a validation on my simulated
precipitation fields. These precipitation fields are generated while
using the RAMS Regional Atmospheric Model. I have created a GRIB file
using GrADS and have been able to decode this GRIB file correctly.
Next to that, I have also created a GRIB file with an interpolated
field of rainfall observations. Both files only have one timestep. I
try to use the MODE tool on the GRIB files (attached to this e-mail)
but I am stuck with the following error:
>
> bin/mode ../rain.grb ../rainstat.grb
tutorial/config/MODEConfig_default
> DEBUG 1: Default Config File:
/home/maat009/METv3.1/data/config/MODEConfig_default
> DEBUG 1: Match Config File: tutorial/config/MODEConfig_default
> DEBUG 1: Merge Config File: tutorial/config/MODEConfig_default
> DEBUG 1: Forecast File: ../rain.grb
> DEBUG 1: Observation File: ../rainstat.grb
> WARNING:
> WARNING: MetGrib1DataFile::data_plane() -> No exact match found for
VarInfo "61/L1" in GRIB file "../rain.grb".
> WARNING:
> ERROR :
> ERROR : process_fcst_obs_files() -> can't get data from file
"../rain.grb"
>
> Could you let me know what is going wrong here? And if possible help
me further...
>
> Kind regards,
>
> Herbert ter Maat
> Researcher Land-Atmosphere Interactions
> ESS-CC (Earth System Science-Climate Change)
> Alterra, Wageningen-UR
> PO Box 47, 6700 AA Wageningen, The Netherlands
> Visiting address: Droevendaalsesteeg 3 (building 100), Wageningen
> tel: +31 317 486429
> fax: +31 317 419000
> email: herbert.termaat at wur.nl<mailto:herbert.termaat at wur.nl>
> research: http://www.alterra.wur.nl/ESS-
CC<http://www.alterra.wur.nl/UK/research/Specialisation+Water+and+Climate/ESSCC>
> education: http://www.ess.wur.nl<http://www.ess.wur.nl/>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #56395] MODE error: no exact match found
From: Maat, Herbert ter
Time: Mon May 14 07:26:25 2012
Dear Paul,
I have put the data in the directory
incoming/irap/met_help/termaat_data/ I will continue with the trial
and error-suggestion :-)
Kind regards,
Herbert
-----Original
Message-----
From: Paul Oldenburg via RT [mailto:met_help at ucar.edu]
Sent: vrijdag 11 mei 2012 18:30
To: Maat, Herbert ter
Subject: Re:
[rt.rap.ucar.edu #56395] MODE error: no exact match found
Herbert,
Can you please send me your model data, observation data and MODE
configuration file? There are instructions for uploading data to our
FTP site here:
http://www.dtcenter.org/met/users/support/met_help.php#ftp. One
suggestion that I have is to try using different fcst_field settings
in your MODE configuration file:
fcst_field = "61/RNN" // where
NN is the record number of the field of interest in your model grib
file fcst_field = "61/L0"
You may have to go through a similar
process with the obs_field setting as well. This problem is usually
solved through trial and error. Please let me know if you have any
questions.
Paul
On 05/11/2012 10:21 AM, Maat, Herbert ter via
RT wrote:
>
> Fri May 11 10:21:39 2012: Request 56395 was acted
upon.
> Transaction: Ticket created by Herbert.termaat at wur.nl
>
Queue: met_help
> Subject: MODE error: no exact match found
>
Owner: Nobody
> Requestors: Herbert.termaat at wur.nl
>
Status: new
> Ticket<URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>
>
>
Hello,
>
> I have been using the MET package now for a week. I am
mostly interested in the MODE-tool to perform a validation on my
simulated precipitation fields. These precipitation fields are
generated while using the RAMS Regional Atmospheric Model. I have
created a GRIB file using GrADS and have been able to decode this GRIB
file correctly. Next to that, I have also created a GRIB file with an
interpolated field of rainfall observations. Both files only have one
timestep. I try to use the MODE tool on the GRIB files (attached to
this e-mail) but I am stuck with the following error:
>
> bin/mode
../rain.grb ../rainstat.grb
> tutorial/config/MODEConfig_default
>
DEBUG 1: Default Config File:
>
/home/maat009/METv3.1/data/config/MODEConfig_default
> DEBUG 1: Match
Config File: tutorial/config/MODEConfig_default
> DEBUG 1: Merge
Config File: tutorial/config/MODEConfig_default
> DEBUG 1: Forecast
File: ../rain.grb
> DEBUG 1: Observation File: ../rainstat.grb
>
WARNING:
> WARNING: MetGrib1DataFile::data_plane() -> No exact match
found for VarInfo "61/L1" in GRIB file "../rain.grb".
> WARNING:
>
ERROR :
> ERROR : process_fcst_obs_files() -> can't get data from
file "../rain.grb"
>
> Could you let me know what is going wrong
here? And if possible help me further...
>
> Kind regards,
>
>
Herbert ter Maat
> Researcher Land-Atmosphere Interactions ESS-CC
(Earth System
> Science-Climate Change) Alterra, Wageningen-UR PO
Box 47, 6700 AA
> Wageningen, The Netherlands Visiting address:
Droevendaalsesteeg 3
> (building 100), Wageningen
> tel: +31 317
486429
> fax: +31 317 419000
> email:
herbert.termaat at wur.nl<mailto:herbert.termaat at wur.nl>
> research:
>
http://www.alterra.wur.nl/ESS-CC<http://www.alterra.wur.nl/UK/research
> /Specialisation+Water+and+Climate/ESSCC>
> education:
http://www.ess.wur.nl<http://www.ess.wur.nl/>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #56395] MODE error: no exact match found
From: Maat, Herbert ter
Time: Mon May 14 07:41:54 2012
Dear Paul,
I have been able to progress further with your hint with
the R-option. However, my next problem is the following:
[maat009 at scomp1048 METv3.1]$ bin/mode ../rain.grb ../rainstat.grb
tutorial/config/MODEConfig_default
DEBUG 1: Default Config File:
/home/maat009/METv3.1/data/config/MODEConfig_default
DEBUG 1: Match
Config File: tutorial/config/MODEConfig_default
DEBUG 1: Merge Config
File: tutorial/config/MODEConfig_default
DEBUG 1: Forecast File:
../rain.grb
DEBUG 1: Observation File: ../rainstat.grb
WARNING:
WARNING: process_fcst_obs_files() -> Forecast and observation valid
times do not match 20060801_000000 != 20060801_080000.
WARNING:
DEBUG 1: Forecast Field: APCP at R1
DEBUG 1: Observation Field: APCP
at R1
DEBUG 2: Identifying objects in the forecast and observation
fields...
DEBUG 2: Computing contingency table statistics...
DEBUG
2: Identified: 4 forecast objects and 8 observation objects.
DEBUG 2:
Performing merging (no merging) in the forecast field.
DEBUG 2:
Performing merging (no merging) in the observation field.
DEBUG 2:
Remaining: 4 forecast objects and 8 observation objects.
DEBUG 2:
Performing matching between the forecast and observation fields.
ERROR :
ERROR : convex_hull(Polyline &) -> can't find next hull
point
ERROR :
Regards,
Herbert ter Maat
-----Original
Message-----
From: Paul Oldenburg via RT [mailto:met_help at ucar.edu]
Sent: vrijdag 11 mei 2012 18:30
To: Maat, Herbert ter
Subject: Re:
[rt.rap.ucar.edu #56395] MODE error: no exact match found
Herbert,
Can you please send me your model data, observation data and MODE
configuration file? There are instructions for uploading data to our
FTP site here:
http://www.dtcenter.org/met/users/support/met_help.php#ftp. One
suggestion that I have is to try using different fcst_field settings
in your MODE configuration file:
fcst_field = "61/RNN" // where
NN is the record number of the field of interest in your model grib
file fcst_field = "61/L0"
You may have to go through a similar
process with the obs_field setting as well. This problem is usually
solved through trial and error. Please let me know if you have any
questions.
Paul
On 05/11/2012 10:21 AM, Maat, Herbert ter via
RT wrote:
>
> Fri May 11 10:21:39 2012: Request 56395 was acted
upon.
> Transaction: Ticket created by Herbert.termaat at wur.nl
>
Queue: met_help
> Subject: MODE error: no exact match found
>
Owner: Nobody
> Requestors: Herbert.termaat at wur.nl
>
Status: new
> Ticket<URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>
>
>
Hello,
>
> I have been using the MET package now for a week. I am
mostly interested in the MODE-tool to perform a validation on my
simulated precipitation fields. These precipitation fields are
generated while using the RAMS Regional Atmospheric Model. I have
created a GRIB file using GrADS and have been able to decode this GRIB
file correctly. Next to that, I have also created a GRIB file with an
interpolated field of rainfall observations. Both files only have one
timestep. I try to use the MODE tool on the GRIB files (attached to
this e-mail) but I am stuck with the following error:
>
> bin/mode
../rain.grb ../rainstat.grb
> tutorial/config/MODEConfig_default
>
DEBUG 1: Default Config File:
>
/home/maat009/METv3.1/data/config/MODEConfig_default
> DEBUG 1: Match
Config File: tutorial/config/MODEConfig_default
> DEBUG 1: Merge
Config File: tutorial/config/MODEConfig_default
> DEBUG 1: Forecast
File: ../rain.grb
> DEBUG 1: Observation File: ../rainstat.grb
>
WARNING:
> WARNING: MetGrib1DataFile::data_plane() -> No exact match
found for VarInfo "61/L1" in GRIB file "../rain.grb".
> WARNING:
>
ERROR :
> ERROR : process_fcst_obs_files() -> can't get data from
file "../rain.grb"
>
> Could you let me know what is going wrong
here? And if possible help me further...
>
> Kind regards,
>
>
Herbert ter Maat
> Researcher Land-Atmosphere Interactions ESS-CC
(Earth System
> Science-Climate Change) Alterra, Wageningen-UR PO
Box 47, 6700 AA
> Wageningen, The Netherlands Visiting address:
Droevendaalsesteeg 3
> (building 100), Wageningen
> tel: +31 317
486429
> fax: +31 317 419000
> email:
herbert.termaat at wur.nl<mailto:herbert.termaat at wur.nl>
> research:
>
http://www.alterra.wur.nl/ESS-CC<http://www.alterra.wur.nl/UK/research
> /Specialisation+Water+and+Climate/ESSCC>
> education:
http://www.ess.wur.nl<http://www.ess.wur.nl/>
>
------------------------------------------------
Subject: Re: [rt.rap.ucar.edu #56395] MODE error: no exact match found
From: Paul Oldenburg
Time: Mon May 14 09:39:44 2012
Herbert,
I'm afraid that I am not able to reproduce that error with the data
that you sent me. Can you please tell me what
operating system you are using and which compiler you used to build
MET?
Thanks,
Paul
On 05/14/2012 07:41 AM, Maat, Herbert ter via RT wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>
> Dear Paul,
>
> I have been able to progress further with your hint with the R-
option. However, my next problem is the following:
>
> [maat009 at scomp1048 METv3.1]$ bin/mode ../rain.grb ../rainstat.grb
tutorial/config/MODEConfig_default
> DEBUG 1: Default Config File:
/home/maat009/METv3.1/data/config/MODEConfig_default
> DEBUG 1: Match Config File: tutorial/config/MODEConfig_default
> DEBUG 1: Merge Config File: tutorial/config/MODEConfig_default
> DEBUG 1: Forecast File: ../rain.grb
> DEBUG 1: Observation File: ../rainstat.grb
> WARNING:
> WARNING: process_fcst_obs_files() -> Forecast and observation valid
times do not match 20060801_000000 != 20060801_080000.
> WARNING:
> DEBUG 1: Forecast Field: APCP at R1
> DEBUG 1: Observation Field: APCP at R1
> DEBUG 2: Identifying objects in the forecast and observation
fields...
> DEBUG 2: Computing contingency table statistics...
> DEBUG 2: Identified: 4 forecast objects and 8 observation objects.
> DEBUG 2: Performing merging (no merging) in the forecast field.
> DEBUG 2: Performing merging (no merging) in the observation field.
> DEBUG 2: Remaining: 4 forecast objects and 8 observation objects.
> DEBUG 2: Performing matching between the forecast and observation
fields.
> ERROR :
> ERROR : convex_hull(Polyline&) -> can't find next hull point
> ERROR :
>
> Regards,
> Herbert ter Maat
>
> -----Original Message-----
> From: Paul Oldenburg via RT [mailto:met_help at ucar.edu]
> Sent: vrijdag 11 mei 2012 18:30
> To: Maat, Herbert ter
> Subject: Re: [rt.rap.ucar.edu #56395] MODE error: no exact match
found
>
> Herbert,
>
> Can you please send me your model data, observation data and MODE
configuration file? There are instructions for uploading data to our
FTP site here:
http://www.dtcenter.org/met/users/support/met_help.php#ftp. One
suggestion that I have is to try using different fcst_field settings
in your MODE configuration file:
>
> fcst_field = "61/RNN" // where NN is the record number of the
field of interest in your model grib file fcst_field = "61/L0"
>
> You may have to go through a similar process with the obs_field
setting as well. This problem is usually solved through trial and
error. Please let me know if you have any questions.
>
> Paul
>
>
> On 05/11/2012 10:21 AM, Maat, Herbert ter via RT wrote:
>>
>> Fri May 11 10:21:39 2012: Request 56395 was acted upon.
>> Transaction: Ticket created by Herbert.termaat at wur.nl
>> Queue: met_help
>> Subject: MODE error: no exact match found
>> Owner: Nobody
>> Requestors: Herbert.termaat at wur.nl
>> Status: new
>> Ticket<URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>>
>>
>> Hello,
>>
>> I have been using the MET package now for a week. I am mostly
interested in the MODE-tool to perform a validation on my simulated
precipitation fields. These precipitation fields are generated while
using the RAMS Regional Atmospheric Model. I have created a GRIB file
using GrADS and have been able to decode this GRIB file correctly.
Next to that, I have also created a GRIB file with an interpolated
field of rainfall observations. Both files only have one timestep. I
try to use the MODE tool on the GRIB files (attached to this e-mail)
but I am stuck with the following error:
>>
>> bin/mode ../rain.grb ../rainstat.grb
>> tutorial/config/MODEConfig_default
>> DEBUG 1: Default Config File:
>> /home/maat009/METv3.1/data/config/MODEConfig_default
>> DEBUG 1: Match Config File: tutorial/config/MODEConfig_default
>> DEBUG 1: Merge Config File: tutorial/config/MODEConfig_default
>> DEBUG 1: Forecast File: ../rain.grb
>> DEBUG 1: Observation File: ../rainstat.grb
>> WARNING:
>> WARNING: MetGrib1DataFile::data_plane() -> No exact match found
for VarInfo "61/L1" in GRIB file "../rain.grb".
>> WARNING:
>> ERROR :
>> ERROR : process_fcst_obs_files() -> can't get data from file
"../rain.grb"
>>
>> Could you let me know what is going wrong here? And if possible
help me further...
>>
>> Kind regards,
>>
>> Herbert ter Maat
>> Researcher Land-Atmosphere Interactions ESS-CC (Earth System
>> Science-Climate Change) Alterra, Wageningen-UR PO Box 47, 6700 AA
>> Wageningen, The Netherlands Visiting address: Droevendaalsesteeg 3
>> (building 100), Wageningen
>> tel: +31 317 486429
>> fax: +31 317 419000
>> email: herbert.termaat at wur.nl<mailto:herbert.termaat at wur.nl>
>> research:
>> http://www.alterra.wur.nl/ESS-
CC<http://www.alterra.wur.nl/UK/research
>> /Specialisation+Water+and+Climate/ESSCC>
>> education: http://www.ess.wur.nl<http://www.ess.wur.nl/>
>>
>
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #56395] MODE error: no exact match found
From: Maat, Herbert ter
Time: Tue May 15 02:03:38 2012
Paul,
This is the description of the machine that I'm using:
The
WUR HPC cluster machine currently consists of 32 blades, with each 2
quad core (Intel Xeon) processors and 16 Gb RAM. So 256 compute nodes
are available with each a minimum of 2 Gb RAM. All blades are
connected through a low latency interconnect (Infiniband). These
compute nodes are meant for job execution. No software (besides the
operating system) resides on these compute nodes. These are LINUX
based computers.
The compiler that I used are the Intel C compiler
(icc).
Kind regards,
Herbert ter Maat
-----Original
Message-----
From: Paul Oldenburg via RT [mailto:met_help at ucar.edu]
Sent: maandag 14 mei 2012 17:40
To: Maat, Herbert ter
Subject: Re:
[rt.rap.ucar.edu #56395] MODE error: no exact match found
Herbert,
I'm afraid that I am not able to reproduce that error with the data
that you sent me. Can you please tell me what operating system you
are using and which compiler you used to build MET?
Thanks,
Paul
On 05/14/2012 07:41 AM, Maat, Herbert ter via RT wrote:
>
> <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>
> Dear
Paul,
>
> I have been able to progress further with your hint with
the R-option. However, my next problem is the following:
>
>
[maat009 at scomp1048 METv3.1]$ bin/mode ../rain.grb ../rainstat.grb
>
tutorial/config/MODEConfig_default
> DEBUG 1: Default Config File:
> /home/maat009/METv3.1/data/config/MODEConfig_default
> DEBUG 1:
Match Config File: tutorial/config/MODEConfig_default
> DEBUG 1:
Merge Config File: tutorial/config/MODEConfig_default
> DEBUG 1:
Forecast File: ../rain.grb
> DEBUG 1: Observation File:
../rainstat.grb
> WARNING:
> WARNING: process_fcst_obs_files() ->
Forecast and observation valid times do not match 20060801_000000 !=
20060801_080000.
> WARNING:
> DEBUG 1: Forecast Field: APCP at R1
>
DEBUG 1: Observation Field: APCP at R1 DEBUG 2: Identifying objects in
> the forecast and observation fields...
> DEBUG 2: Computing
contingency table statistics...
> DEBUG 2: Identified: 4 forecast
objects and 8 observation objects.
> DEBUG 2: Performing merging (no
merging) in the forecast field.
> DEBUG 2: Performing merging (no
merging) in the observation field.
> DEBUG 2: Remaining: 4 forecast
objects and 8 observation objects.
> DEBUG 2: Performing matching
between the forecast and observation fields.
> ERROR :
> ERROR :
convex_hull(Polyline&) -> can't find next hull point ERROR
> :
>
> Regards,
> Herbert ter Maat
>
> -----Original Message-----
>
From: Paul Oldenburg via RT [mailto:met_help at ucar.edu]
> Sent:
vrijdag 11 mei 2012 18:30
> To: Maat, Herbert ter
> Subject: Re:
[rt.rap.ucar.edu #56395] MODE error: no exact match found
>
>
Herbert,
>
> Can you please send me your model data, observation
data and MODE configuration file? There are instructions for
uploading data to our FTP site here:
http://www.dtcenter.org/met/users/support/met_help.php#ftp. One
suggestion that I have is to try using different fcst_field settings
in your MODE configuration file:
>
> fcst_field = "61/RNN" //
where NN is the record number of the field of interest in your model
grib file fcst_field = "61/L0"
>
> You may have to go through a
similar process with the obs_field setting as well. This problem is
usually solved through trial and error. Please let me know if you
have any questions.
>
> Paul
>
>
> On 05/11/2012 10:21 AM, Maat,
Herbert ter via RT wrote:
>>
>> Fri May 11 10:21:39 2012: Request
56395 was acted upon.
>> Transaction: Ticket created by
Herbert.termaat at wur.nl
>> Queue: met_help
>>
Subject: MODE error: no exact match found
>> Owner: Nobody
>> Requestors: Herbert.termaat at wur.nl
>> Status: new
>>
Ticket<URL:
>>
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>>
>>
>>
Hello,
>>
>> I have been using the MET package now for a week. I am
mostly interested in the MODE-tool to perform a validation on my
simulated precipitation fields. These precipitation fields are
generated while using the RAMS Regional Atmospheric Model. I have
created a GRIB file using GrADS and have been able to decode this GRIB
file correctly. Next to that, I have also created a GRIB file with an
interpolated field of rainfall observations. Both files only have one
timestep. I try to use the MODE tool on the GRIB files (attached to
this e-mail) but I am stuck with the following error:
>>
>> bin/mode
../rain.grb ../rainstat.grb
>> tutorial/config/MODEConfig_default
>>
DEBUG 1: Default Config File:
>>
/home/maat009/METv3.1/data/config/MODEConfig_default
>> DEBUG 1:
Match Config File: tutorial/config/MODEConfig_default
>> DEBUG 1:
Merge Config File: tutorial/config/MODEConfig_default
>> DEBUG 1:
Forecast File: ../rain.grb
>> DEBUG 1: Observation File:
../rainstat.grb
>> WARNING:
>> WARNING:
MetGrib1DataFile::data_plane() -> No exact match found for VarInfo
"61/L1" in GRIB file "../rain.grb".
>> WARNING:
>> ERROR :
>>
ERROR : process_fcst_obs_files() -> can't get data from file
"../rain.grb"
>>
>> Could you let me know what is going wrong here?
And if possible help me further...
>>
>> Kind regards,
>>
>>
Herbert ter Maat
>> Researcher Land-Atmosphere Interactions ESS-CC
(Earth System
>> Science-Climate Change) Alterra, Wageningen-UR PO
Box 47, 6700 AA
>> Wageningen, The Netherlands Visiting address:
Droevendaalsesteeg 3
>> (building 100), Wageningen
>> tel: +31 317
486429
>> fax: +31 317 419000
>> email:
herbert.termaat at wur.nl<mailto:herbert.termaat at wur.nl>
>> research:
>> http://www.alterra.wur.nl/ESS-
CC<http://www.alterra.wur.nl/UK/researc
>> h
/Specialisation+Water+and+Climate/ESSCC>
>> education:
http://www.ess.wur.nl<http://www.ess.wur.nl/>
>>
>
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #56395] MODE error: no exact match found
From: Paul Oldenburg
Time: Tue May 15 07:01:12 2012
Herbert,
Can you please run the following commands and send the output:
$ uname -a
$ icc --version # or whatever icc flag gives version information
Thanks,
Paul
On 2012-05-15 02:03, Maat, Herbert ter via RT wrote:
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395 >
>
> Paul,
>
> This is the description of the machine that I'm using:
> The WUR HPC cluster machine currently consists of 32 blades, with
> each 2 quad core (Intel Xeon) processors and 16 Gb RAM. So 256
> compute
> nodes are available with each a minimum of 2 Gb RAM. All blades are
> connected through a low latency interconnect (Infiniband). These
> compute nodes are meant for job execution. No software (besides the
> operating system) resides on these compute nodes. These are LINUX
> based computers.
> The compiler that I used are the Intel C compiler (icc).
>
> Kind regards,
> Herbert ter Maat
>
> -----Original Message-----
> From: Paul Oldenburg via RT [mailto:met_help at ucar.edu]
> Sent: maandag 14 mei 2012 17:40
> To: Maat, Herbert ter
> Subject: Re: [rt.rap.ucar.edu #56395] MODE error: no exact match
> found
>
> Herbert,
>
> I'm afraid that I am not able to reproduce that error with the data
> that you sent me. Can you please tell me what operating system you
> are using and which compiler you used to build MET?
>
> Thanks,
>
> Paul
>
>
> On 05/14/2012 07:41 AM, Maat, Herbert ter via RT wrote:
>>
>> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>>
>> Dear Paul,
>>
>> I have been able to progress further with your hint with the
>> R-option. However, my next problem is the following:
>>
>> [maat009 at scomp1048 METv3.1]$ bin/mode ../rain.grb ../rainstat.grb
>> tutorial/config/MODEConfig_default
>> DEBUG 1: Default Config File:
>> /home/maat009/METv3.1/data/config/MODEConfig_default
>> DEBUG 1: Match Config File: tutorial/config/MODEConfig_default
>> DEBUG 1: Merge Config File: tutorial/config/MODEConfig_default
>> DEBUG 1: Forecast File: ../rain.grb
>> DEBUG 1: Observation File: ../rainstat.grb
>> WARNING:
>> WARNING: process_fcst_obs_files() -> Forecast and observation
valid
>> times do not match 20060801_000000 != 20060801_080000.
>> WARNING:
>> DEBUG 1: Forecast Field: APCP at R1
>> DEBUG 1: Observation Field: APCP at R1 DEBUG 2: Identifying objects
>> in
>> the forecast and observation fields...
>> DEBUG 2: Computing contingency table statistics...
>> DEBUG 2: Identified: 4 forecast objects and 8 observation objects.
>> DEBUG 2: Performing merging (no merging) in the forecast field.
>> DEBUG 2: Performing merging (no merging) in the observation field.
>> DEBUG 2: Remaining: 4 forecast objects and 8 observation objects.
>> DEBUG 2: Performing matching between the forecast and observation
>> fields.
>> ERROR :
>> ERROR : convex_hull(Polyline&) -> can't find next hull point
ERROR
>> :
>>
>> Regards,
>> Herbert ter Maat
>>
>> -----Original Message-----
>> From: Paul Oldenburg via RT [mailto:met_help at ucar.edu]
>> Sent: vrijdag 11 mei 2012 18:30
>> To: Maat, Herbert ter
>> Subject: Re: [rt.rap.ucar.edu #56395] MODE error: no exact match
>> found
>>
>> Herbert,
>>
>> Can you please send me your model data, observation data and MODE
>> configuration file? There are instructions for uploading data to
our
>> FTP site here:
>> http://www.dtcenter.org/met/users/support/met_help.php#ftp. One
>> suggestion that I have is to try using different fcst_field
settings
>> in your MODE configuration file:
>>
>> fcst_field = "61/RNN" // where NN is the record number of the
>> field of interest in your model grib file fcst_field = "61/L0"
>>
>> You may have to go through a similar process with the obs_field
>> setting as well. This problem is usually solved through trial and
>> error. Please let me know if you have any questions.
>>
>> Paul
>>
>>
>> On 05/11/2012 10:21 AM, Maat, Herbert ter via RT wrote:
>>>
>>> Fri May 11 10:21:39 2012: Request 56395 was acted upon.
>>> Transaction: Ticket created by Herbert.termaat at wur.nl
>>> Queue: met_help
>>> Subject: MODE error: no exact match found
>>> Owner: Nobody
>>> Requestors: Herbert.termaat at wur.nl
>>> Status: new
>>> Ticket<URL:
>>> https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>>>
>>>
>>> Hello,
>>>
>>> I have been using the MET package now for a week. I am mostly
>>> interested in the MODE-tool to perform a validation on my
simulated
>>> precipitation fields. These precipitation fields are generated
while
>>> using the RAMS Regional Atmospheric Model. I have created a GRIB
file
>>> using GrADS and have been able to decode this GRIB file correctly.
>>> Next to that, I have also created a GRIB file with an interpolated
>>> field of rainfall observations. Both files only have one
timestep. I
>>> try to use the MODE tool on the GRIB files (attached to this e-
mail)
>>> but I am stuck with the following error:
>>>
>>> bin/mode ../rain.grb ../rainstat.grb
>>> tutorial/config/MODEConfig_default
>>> DEBUG 1: Default Config File:
>>> /home/maat009/METv3.1/data/config/MODEConfig_default
>>> DEBUG 1: Match Config File: tutorial/config/MODEConfig_default
>>> DEBUG 1: Merge Config File: tutorial/config/MODEConfig_default
>>> DEBUG 1: Forecast File: ../rain.grb
>>> DEBUG 1: Observation File: ../rainstat.grb
>>> WARNING:
>>> WARNING: MetGrib1DataFile::data_plane() -> No exact match found
>>> for VarInfo "61/L1" in GRIB file "../rain.grb".
>>> WARNING:
>>> ERROR :
>>> ERROR : process_fcst_obs_files() -> can't get data from file
>>> "../rain.grb"
>>>
>>> Could you let me know what is going wrong here? And if possible
>>> help me further...
>>>
>>> Kind regards,
>>>
>>> Herbert ter Maat
>>> Researcher Land-Atmosphere Interactions ESS-CC (Earth System
>>> Science-Climate Change) Alterra, Wageningen-UR PO Box 47, 6700 AA
>>> Wageningen, The Netherlands Visiting address: Droevendaalsesteeg 3
>>> (building 100), Wageningen
>>> tel: +31 317 486429
>>> fax: +31 317 419000
>>> email: herbert.termaat at wur.nl<mailto:herbert.termaat at wur.nl>
>>> research:
>>>
>>> http://www.alterra.wur.nl/ESS-
CC<http://www.alterra.wur.nl/UK/researc
>>> h /Specialisation+Water+and+Climate/ESSCC>
>>> education: http://www.ess.wur.nl<http://www.ess.wur.nl/>
>>>
>>
>>
>>
>>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #56395] MODE error: no exact match found
From: Maat, Herbert ter
Time: Tue May 15 08:28:58 2012
Paul,
This is the output from the commands requested by you:
[maat009 at scomp1048 ~]$ uname -a
Linux scomp1048.wurnet.nl 2.6.18-
164.6.1.el5 #1 SMP Tue Nov 3 16:12:36 EST 2009 x86_64 x86_64 x86_64
GNU/Linux
[maat009 at scomp1048 ~]$ icc --version
icc (ICC) 11.1
20091130
Copyright (C) 1985-2009 Intel Corporation. All rights
reserved.
-----Original Message-----
From: Paul Oldenburg via RT
[mailto:met_help at ucar.edu]
Sent: dinsdag 15 mei 2012 15:01
To:
Maat, Herbert ter
Subject: RE: [rt.rap.ucar.edu #56395] MODE error:
no exact match found
Herbert,
Can you please run the following
commands and send the output:
$ uname -a
$ icc --version # or
whatever icc flag gives version information
Thanks,
Paul
On
2012-05-15 02:03, Maat, Herbert ter via RT wrote:
> <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395 >
>
> Paul,
>
> This is the description of the machine that I'm using:
> The WUR
HPC cluster machine currently consists of 32 blades, with each
> 2
quad core (Intel Xeon) processors and 16 Gb RAM. So 256 compute
>
nodes are available with each a minimum of 2 Gb RAM. All blades are
> connected through a low latency interconnect (Infiniband). These
>
compute nodes are meant for job execution. No software (besides the
> operating system) resides on these compute nodes. These are LINUX
> based computers.
> The compiler that I used are the Intel C
compiler (icc).
>
> Kind regards,
> Herbert ter Maat
>
>
-----Original Message-----
> From: Paul Oldenburg via RT
[mailto:met_help at ucar.edu]
> Sent: maandag 14 mei 2012 17:40
> To:
Maat, Herbert ter
> Subject: Re: [rt.rap.ucar.edu #56395] MODE error:
no exact match found
>
> Herbert,
>
> I'm afraid that I am not
able to reproduce that error with the data
> that you sent me. Can
you please tell me what operating system you
> are using and which
compiler you used to build MET?
>
> Thanks,
>
> Paul
>
>
> On
05/14/2012 07:41 AM, Maat, Herbert ter via RT wrote:
>>
>> <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>>
>> Dear
Paul,
>>
>> I have been able to progress further with your hint with
the
>> R-option. However, my next problem is the following:
>>
>>
[maat009 at scomp1048 METv3.1]$ bin/mode ../rain.grb ../rainstat.grb
>>
tutorial/config/MODEConfig_default
>> DEBUG 1: Default Config File:
>> /home/maat009/METv3.1/data/config/MODEConfig_default
>> DEBUG 1:
Match Config File: tutorial/config/MODEConfig_default
>> DEBUG 1:
Merge Config File: tutorial/config/MODEConfig_default
>> DEBUG 1:
Forecast File: ../rain.grb
>> DEBUG 1: Observation File:
../rainstat.grb
>> WARNING:
>> WARNING: process_fcst_obs_files() ->
Forecast and observation valid
>> times do not match 20060801_000000
!= 20060801_080000.
>> WARNING:
>> DEBUG 1: Forecast Field: APCP at
R1
>> DEBUG 1: Observation Field: APCP at R1 DEBUG 2: Identifying
objects
>> in the forecast and observation fields...
>> DEBUG 2:
Computing contingency table statistics...
>> DEBUG 2: Identified: 4
forecast objects and 8 observation objects.
>> DEBUG 2: Performing
merging (no merging) in the forecast field.
>> DEBUG 2: Performing
merging (no merging) in the observation field.
>> DEBUG 2: Remaining:
4 forecast objects and 8 observation objects.
>> DEBUG 2: Performing
matching between the forecast and observation
>> fields.
>> ERROR
:
>> ERROR : convex_hull(Polyline&) -> can't find next hull point
ERROR
>> :
>>
>> Regards,
>> Herbert ter Maat
>>
>>
-----Original Message-----
>> From: Paul Oldenburg via RT
[mailto:met_help at ucar.edu]
>> Sent: vrijdag 11 mei 2012 18:30
>> To:
Maat, Herbert ter
>> Subject: Re: [rt.rap.ucar.edu #56395] MODE
error: no exact match
>> found
>>
>> Herbert,
>>
>> Can you
please send me your model data, observation data and MODE
>>
configuration file? There are instructions for uploading data to our
>> FTP site here:
>>
http://www.dtcenter.org/met/users/support/met_help.php#ftp. One
>>
suggestion that I have is to try using different fcst_field settings
>> in your MODE configuration file:
>>
>> fcst_field = "61/RNN" //
where NN is the record number of the field
>> of interest in your
model grib file fcst_field = "61/L0"
>>
>> You may have to go
through a similar process with the obs_field
>> setting as well.
This problem is usually solved through trial and
>> error. Please
let me know if you have any questions.
>>
>> Paul
>>
>>
>> On
05/11/2012 10:21 AM, Maat, Herbert ter via RT wrote:
>>>
>>> Fri May
11 10:21:39 2012: Request 56395 was acted upon.
>>> Transaction:
Ticket created by Herbert.termaat at wur.nl
>>> Queue: met_help
>>> Subject: MODE error: no exact match found
>>>
Owner: Nobody
>>> Requestors: Herbert.termaat at wur.nl
>>>
Status: new
>>> Ticket<URL:
>>>
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=56395>
>>>
>>>
>>> Hello,
>>>
>>> I have been using the MET package now for a week.
I am mostly
>>> interested in the MODE-tool to perform a validation
on my simulated
>>> precipitation fields. These precipitation fields
are generated while
>>> using the RAMS Regional Atmospheric Model. I
have created a GRIB
>>> file using GrADS and have been able to
decode this GRIB file correctly.
>>> Next to that, I have also
created a GRIB file with an interpolated
>>> field of rainfall
observations. Both files only have one timestep.
>>> I try to use
the MODE tool on the GRIB files (attached to this
>>> e-mail) but I
am stuck with the following error:
>>>
>>> bin/mode ../rain.grb
../rainstat.grb
>>> tutorial/config/MODEConfig_default
>>> DEBUG 1:
Default Config File:
>>>
/home/maat009/METv3.1/data/config/MODEConfig_default
>>> DEBUG 1:
Match Config File: tutorial/config/MODEConfig_default
>>> DEBUG 1:
Merge Config File: tutorial/config/MODEConfig_default
>>> DEBUG 1:
Forecast File: ../rain.grb
>>> DEBUG 1: Observation File:
../rainstat.grb
>>> WARNING:
>>> WARNING:
MetGrib1DataFile::data_plane() -> No exact match found
>>> for
VarInfo "61/L1" in GRIB file "../rain.grb".
>>> WARNING:
>>> ERROR
:
>>> ERROR : process_fcst_obs_files() -> can't get data from file
>>> "../rain.grb"
>>>
>>> Could you let me know what is going wrong
here? And if possible help
>>> me further...
>>>
>>> Kind regards,
>>>
>>> Herbert ter Maat
>>> Researcher Land-Atmosphere Interactions
ESS-CC (Earth System
>>> Science-Climate Change) Alterra,
Wageningen-UR PO Box 47, 6700 AA
>>> Wageningen, The Netherlands
Visiting address: Droevendaalsesteeg 3
>>> (building 100),
Wageningen
>>> tel: +31 317 486429
>>> fax: +31 317 419000
>>>
email: herbert.termaat at wur.nl<mailto:herbert.termaat at wur.nl>
>>>
research:
>>>
>>> http://www.alterra.wur.nl/ESS-
CC<http://www.alterra.wur.nl/UK/resear
>>> c h
/Specialisation+Water+and+Climate/ESSCC>
>>> education:
http://www.ess.wur.nl<http://www.ess.wur.nl/>
>>>
>>
>>
>>
>>
------------------------------------------------
More information about the Met_help
mailing list