[Wrf-users] Problems with sfcp_top_sfcp parameter
Kevin Matthew Nuss
wrf at nusculus.com
Fri Jul 23 12:41:23 MDT 2010
Hi,
I have not used that option, but when I look in Registry.EM, that variable
is spelled "sfcp_to_sfc" rather than "sfcp_top_sfcp" as shown in the Users
Guide.
Kevin
On Fri, Jul 23, 2010 at 6:41 AM, Marcos Tesouro Montecelo <
marcos.tesouro at meteogalicia.es> wrote:
> Hi wrf-users,
>
> I am testing the WRF ARW version 3.2. I am also comparing the results with
> versions 3.0 and 3.1.1 of the WRF with the same configuration between the 3
> versions in order to check the differences between the meteorological
> models, specially the version 3.0 versus 3.2
>
> I am having trouble when I use the variable *sfcp_top_sfcp *with the
> WRFv3.2.* *Although this variable is listed in the User's Guide April 2010
> (pag. 5-41) when I specify it in the namelist.input (true or false) I have
> an error in the real.exe
>
> Without this parameter in the WRF namelist works perfectly.
>
> The attachments archives are the namelist.input I am using and the error
> obtained.
>
> Thank you in advance
>
> Best regards, Marcos
> --
> [image: MeteoGalicia]
> Dr. Marcos Tesouro Montecelo
> Dpto. Predición Numérica e Investigación
> Rúa Roma, 6
> 15.707 Santiago de Compostela
> Tel: +34 981 957 462
> Fax: +34 981 957 466
> marcos.tesouro at meteogalicia.es
> www.meteogalicia.es
>
> &time_control
> run_days = 4,
> run_hours = 0,
> run_minutes = 0,
> run_seconds = 0,
> start_year = 2010, 2010, 2010,
> start_month = 06, 06, 06,
> start_day = 18, 18, 18,
> start_hour = 00, 00, 00,
> start_minute = 00, 00, 00,
> start_second = 00, 00, 00,
> end_year = 2010, 2010, 2010,
> end_month = 06, 06, 06,
> end_day = 22, 22, 21,
> end_hour = 00, 00, 00,
> end_minute = 00, 00, 00,
> end_second = 00, 00, 00,
> interval_seconds = 10800
> input_from_file = .true.,.true.,.true.,
> fine_input_stream = 2, 2, 2,
> history_interval = 60, 60, 60,
> frames_per_outfile = 1000, 1000, 1000,
> restart = .false.,
> restart_interval = 15000,
> io_form_history = 2
> io_form_restart = 2
> io_form_input = 2
> io_form_boundary = 2
> debug_level = 000
> io_form_auxinput2 = 2
> /
>
> &domains
> time_step = 225,
> time_step_fract_num = 0,
> time_step_fract_den = 1,
> max_dom = 3,
> s_we = 1, 1, 1,
> e_we = 119, 172, 118,
> s_sn = 1, 1, 1,
> e_sn = 105, 139, 127,
> s_vert = 1, 1, 1,
> e_vert = 33, 33, 33,
> num_metgrid_levels = 27,
> eta_levels = 1.000, 0.994, 0.990, 0.986, 0.981,
> 0.971, 0.952, 0.933, 0.904, 0.875,
> 0.856, 0.827, 0.798, 0.760, 0.712,
> 0.664, 0.616, 0.568, 0.520, 0.448,
> 0.376, 0.304, 0.232, 0.184, 0.121,
> 0.097, 0.059, 0.050, 0.040, 0.030,
> 0.020, 0.010, 0.000,
> dx = 36000, 12000, 4000,
> dy = 36000, 12000, 4000,
> p_top_requested = 1000
> grid_id = 1, 2, 3,
> parent_id = 0, 1, 2,
> i_parent_start = 1, 47, 66,
> j_parent_start = 1, 28, 55,
> parent_grid_ratio = 1, 3, 3,
> parent_time_step_ratio = 1, 3, 3,
> feedback = 0,
> smooth_option = 0,
> use_adaptive_time_step = .true.,
> step_to_output_time = .true.,
> target_cfl = 1.1, 1.1, 1.1,
> max_step_increase_pct = 10, 51, 51,
> starting_time_step = 216, 72, 24,
> max_time_step = 540, 180, 60,
> min_time_step = 216, 72, 24,
> interp_type = 1,
> sfcp_top_sfcp = .true.,
>
>
> /
>
> &physics
> mp_physics = 6, 6, 6,
> ra_lw_physics = 1, 1, 1,
> ra_sw_physics = 1, 1, 1,
> radt = 36, 36, 36,
> sf_sfclay_physics = 1, 1, 1,
> sf_surface_physics = 1, 1, 1,
> bl_pbl_physics = 1, 1, 1,
> bldt = 0, 0, 0,
> cu_physics = 1, 1, 1,
> cudt = 5, 5, 5,
> isfflx = 1,
> ifsnow = 0,
> icloud = 1,
> surface_input_source = 1,
> num_soil_layers = 5,
> mp_zero_out = 0,
> ! ucmcall = 0,
> sf_urban_physics = 0,
> maxiens = 1,
> maxens = 3,
> maxens2 = 3,
> maxens3 = 16,
> ensdim = 144,
> slope_rad = 0,
> topo_shading = 0,
> num_land_cat = 28,
> /
>
> &fdda
> /
>
> &dynamics
> w_damping = 0,
> diff_opt = 1,
> km_opt = 4,
> diff_6th_opt = 0,
> diff_6th_factor = 0.12,
> base_temp = 290.
> damp_opt = 0,
> zdamp = 5000., 5000., 5000.,
> dampcoef = 0.01, 0.01, 0.01
> khdif = 0, 0, 0,
> kvdif = 0, 0, 0,
> non_hydrostatic = .true., .true., .true.,
> moist_adv_opt = 1, 1, 1,
> scalar_adv_opt = 1, 1, 1,
> ! pd_moist = .true., .true., .true.,
> ! pd_scalar = .true., .true., .true.,
> /
>
> &bdy_control
> spec_bdy_width = 5,
> spec_zone = 1,
> relax_zone = 4,
> specified = .true., .false.,.false.,
> nested = .false., .true., .true.,
> /
>
> &grib2
> /
>
> &namelist_quilt
> nio_tasks_per_group = 0,
> nio_groups = 1,
> /
>
> taskid: 0 hostname: cn030
> ------ ERROR while reading namelist domains ------
> domains is not a valid namelist name
> Namelist dfi_control not found in namelist.input. Using registry defaults
> for v
> ariables in dfi_control
> Namelist tc not found in namelist.input. Using registry defaults for
> variables
> in tc
> Namelist scm not found in namelist.input. Using registry defaults for
> variables
> in scm
> Namelist fire not found in namelist.input. Using registry defaults for
> variable
> s in fire
> -------------- FATAL CALLED ---------------
> FATAL CALLED FROM FILE: <stdin> LINE: 8682
> ERRORS while reading one or more namelists from namelist.input.
> -------------------------------------------
>
> _______________________________________________
> Wrf-users mailing list
> Wrf-users at ucar.edu
> http://mailman.ucar.edu/mailman/listinfo/wrf-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ucar.edu/pipermail/wrf-users/attachments/20100723/aefe0865/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 52763 bytes
Desc: not available
Url : http://mailman.ucar.edu/pipermail/wrf-users/attachments/20100723/aefe0865/attachment-0001.png
More information about the Wrf-users
mailing list