[Wrf-users] Problems with sfcp_top_sfcp parameter
Marcos Tesouro Montecelo
marcos.tesouro at meteogalicia.es
Mon Aug 9 03:00:42 MDT 2010
Hi,
I've been out of the office this days. I've corrected the name of the
parameter and the WRF works fine.
Thank you for the information.
Best regards, Marcos
Kevin Matthew Nuss escribió:
> Hi,
> I have not used that option, but when I look in Registry.EM, that
> variable is spelled "sfcp_to_sfc" rather than "sfcp_top_sfcp" as shown
> in the Users Guide.
> Kevin
>
> On Fri, Jul 23, 2010 at 6:41 AM, Marcos Tesouro Montecelo
> <marcos.tesouro at meteogalicia.es
> <mailto:marcos.tesouro at meteogalicia.es>> wrote:
>
> Hi wrf-users,
>
> I am testing the WRF ARW version 3.2. I am also comparing the
> results with versions 3.0 and 3.1.1 of the WRF with the same
> configuration between the 3 versions in order to check the
> differences between the meteorological models, specially the
> version 3.0 versus 3.2
>
> I am having trouble when I use the variable *sfcp_top_sfcp *with
> the WRFv3.2.* *Although this variable is listed in the User's
> Guide April 2010 (pag. 5-41) when I specify it in the
> namelist.input (true or false) I have an error in the real.exe
>
> Without this parameter in the WRF namelist works perfectly.
>
> The attachments archives are the namelist.input I am using and the
> error obtained.
>
> Thank you in advance
>
> Best regards, Marcos
>
> --
> MeteoGalicia
> Dr. Marcos Tesouro Montecelo
> Dpto. Predición Numérica e Investigación
> Rúa Roma, 6
> 15.707 Santiago de Compostela
> Tel: +34 981 957 462
> Fax: +34 981 957 466
> marcos.tesouro at meteogalicia.es
> <mailto:marcos.tesouro at meteogalicia.es>
> www.meteogalicia.es <http://www.meteogalicia.es/>
>
>
> &time_control
> run_days = 4,
> run_hours = 0,
> run_minutes = 0,
> run_seconds = 0,
> start_year = 2010, 2010, 2010,
> start_month = 06, 06, 06,
> start_day = 18, 18, 18,
> start_hour = 00, 00, 00,
> start_minute = 00, 00, 00,
> start_second = 00, 00, 00,
> end_year = 2010, 2010, 2010,
> end_month = 06, 06, 06,
> end_day = 22, 22, 21,
> end_hour = 00, 00, 00,
> end_minute = 00, 00, 00,
> end_second = 00, 00, 00,
> interval_seconds = 10800
> input_from_file = .true.,.true.,.true.,
> fine_input_stream = 2, 2, 2,
> history_interval = 60, 60, 60,
> frames_per_outfile = 1000, 1000, 1000,
> restart = .false.,
> restart_interval = 15000,
> io_form_history = 2
> io_form_restart = 2
> io_form_input = 2
> io_form_boundary = 2
> debug_level = 000
> io_form_auxinput2 = 2
> /
>
> &domains
> time_step = 225,
> time_step_fract_num = 0,
> time_step_fract_den = 1,
> max_dom = 3,
> s_we = 1, 1, 1,
> e_we = 119, 172, 118,
> s_sn = 1, 1, 1,
> e_sn = 105, 139, 127,
> s_vert = 1, 1, 1,
> e_vert = 33, 33, 33,
> num_metgrid_levels = 27,
> eta_levels = 1.000, 0.994, 0.990, 0.986,
> 0.981,
> 0.971, 0.952, 0.933, 0.904,
> 0.875,
> 0.856, 0.827, 0.798, 0.760,
> 0.712,
> 0.664, 0.616, 0.568, 0.520,
> 0.448,
> 0.376, 0.304, 0.232, 0.184,
> 0.121,
> 0.097, 0.059, 0.050, 0.040,
> 0.030,
> 0.020, 0.010, 0.000,
> dx = 36000, 12000, 4000,
> dy = 36000, 12000, 4000,
> p_top_requested = 1000
> grid_id = 1, 2, 3,
> parent_id = 0, 1, 2,
> i_parent_start = 1, 47, 66,
> j_parent_start = 1, 28, 55,
> parent_grid_ratio = 1, 3, 3,
> parent_time_step_ratio = 1, 3, 3,
> feedback = 0,
> smooth_option = 0,
> use_adaptive_time_step = .true.,
> step_to_output_time = .true.,
> target_cfl = 1.1, 1.1, 1.1,
> max_step_increase_pct = 10, 51, 51,
> starting_time_step = 216, 72, 24,
> max_time_step = 540, 180, 60,
> min_time_step = 216, 72, 24,
> interp_type = 1,
> sfcp_top_sfcp = .true.,
>
>
> /
>
> &physics
> mp_physics = 6, 6, 6,
> ra_lw_physics = 1, 1, 1,
> ra_sw_physics = 1, 1, 1,
> radt = 36, 36, 36,
> sf_sfclay_physics = 1, 1, 1,
> sf_surface_physics = 1, 1, 1,
> bl_pbl_physics = 1, 1, 1,
> bldt = 0, 0, 0,
> cu_physics = 1, 1, 1,
> cudt = 5, 5, 5,
> isfflx = 1,
> ifsnow = 0,
> icloud = 1,
> surface_input_source = 1,
> num_soil_layers = 5,
> mp_zero_out = 0,
> ! ucmcall = 0,
> sf_urban_physics = 0,
> maxiens = 1,
> maxens = 3,
> maxens2 = 3,
> maxens3 = 16,
> ensdim = 144,
> slope_rad = 0,
> topo_shading = 0,
> num_land_cat = 28,
> /
>
> &fdda
> /
>
> &dynamics
> w_damping = 0,
> diff_opt = 1,
> km_opt = 4,
> diff_6th_opt = 0,
> diff_6th_factor = 0.12,
> base_temp = 290.
> damp_opt = 0,
> zdamp = 5000., 5000., 5000.,
> dampcoef = 0.01, 0.01, 0.01
> khdif = 0, 0, 0,
> kvdif = 0, 0, 0,
> non_hydrostatic = .true., .true., .true.,
> moist_adv_opt = 1, 1, 1,
> scalar_adv_opt = 1, 1, 1,
> ! pd_moist = .true., .true., .true.,
> ! pd_scalar = .true., .true., .true.,
> /
>
> &bdy_control
> spec_bdy_width = 5,
> spec_zone = 1,
> relax_zone = 4,
> specified = .true., .false.,.false.,
> nested = .false., .true., .true.,
> /
>
> &grib2
> /
>
> &namelist_quilt
> nio_tasks_per_group = 0,
> nio_groups = 1,
> /
>
> taskid: 0 hostname: cn030
> ------ ERROR while reading namelist domains ------
> domains is not a valid namelist name
> Namelist dfi_control not found in namelist.input. Using registry
> defaults for v
> ariables in dfi_control
> Namelist tc not found in namelist.input. Using registry defaults
> for variables
> in tc
> Namelist scm not found in namelist.input. Using registry defaults
> for variables
> in scm
> Namelist fire not found in namelist.input. Using registry
> defaults for variable
> s in fire
> -------------- FATAL CALLED ---------------
> FATAL CALLED FROM FILE: <stdin> LINE: 8682
> ERRORS while reading one or more namelists from namelist.input.
> -------------------------------------------
>
> _______________________________________________
> Wrf-users mailing list
> Wrf-users at ucar.edu <mailto:Wrf-users at ucar.edu>
> http://mailman.ucar.edu/mailman/listinfo/wrf-users
>
>
--
MeteoGalicia
Dr. Marcos Tesouro Montecelo
Dpto. Predición Numérica e Investigación
Rúa Roma, 6
15.707 Santiago de Compostela
Tel: +34 981 957 462
Fax: +34 981 957 466
marcos.tesouro at meteogalicia.es <mailto:marcos.tesouro at meteogalicia.es>
www.meteogalicia.es <http://www.meteogalicia.es/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ucar.edu/pipermail/wrf-users/attachments/20100809/5b80d3ad/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 52763 bytes
Desc: not available
Url : http://mailman.ucar.edu/pipermail/wrf-users/attachments/20100809/5b80d3ad/attachment-0002.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cabecera.png
Type: image/png
Size: 52763 bytes
Desc: not available
Url : http://mailman.ucar.edu/pipermail/wrf-users/attachments/20100809/5b80d3ad/attachment-0003.png
More information about the Wrf-users
mailing list