[Wrf-users] RUNNING WRFV 3.4.1
Thomas Kloetzke
t.kloetzke at uq.edu.au
Tue Mar 1 16:12:05 MST 2016
Just an additional hint:
Your namelist includes 6 domains so far but max_dom ist still set to 1, which means that WRF will only calculate one domain (in particular it takes the values of the first column). If you intend to calculate one domain only then do not pay attention on my message.
Regards,
Thomas
From: wrf-users-bounces at ucar.edu [mailto:wrf-users-bounces at ucar.edu] On Behalf Of Nikhil
Sent: Tuesday, 1 March 2016 9:02 AM
To: kumar saurabh <sokhiprit1982 at gmail.com>
Cc: wrf-users at ucar.edu
Subject: Re: [Wrf-users] RUNNING WRFV 3.4.1
In your mamelist, you are using io_form_input and io_form_boundary as 10, which probably means that you are providing input file in grib format. does that seem right, i suppose when u run real, u get netcdf file or even from metgrid, how about putting these back to 2 which is for netcdf and then see if it works. also did u compile wrf woth jasper support, if not then u might have to add jasper related flags to configure_new.pl and recompile wrf
On 29 Feb 2016, at 7:53 PM, kumar saurabh <sokhiprit1982 at gmail.com<mailto:sokhiprit1982 at gmail.com>> wrote:
Dear team,
Till now m running wrfv3.4.1 and getting wrfout netcdf well.
But I want output as a grib2 format. I tried many times for changing io_form_x =10 but fail. Anybody pls give step by step procedure with name list.wps and name list.input file sample for getting output as grib2 format. My namelist.input as follows:-
&time_control
run_days = 1,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2016, 2016, 2016, 2016,2016, 2016,
start_month = 02, 02, 02, 02,02, 02,
start_day = 24, 24, 24, 24,24, 24,
start_hour = 00, 00, 00, 00,00, 00,
start_minute = 00, 00, 00, 00, 00, 00,
start_second = 00, 00, 00, 00, 00, 00,
end_year = 2016, 2016, 2016, 2016, 2016, 2016,
end_month = 02, 02, 02, 02, 02, 02,
end_day = 25, 27, 27, 27, 27, 27,
end_hour = 00, 00, 00, 00, 00, 00,
end_minute = 00, 00, 00, 00, 00, 00,
end_second = 00, 00, 00, 00, 00, 00,
interval_seconds = 21600
input_from_file = .true.,.true.,.true.,.true.,.true.,.true.,
history_interval = 360, 360, 360, 360, 360, 360,
frames_per_outfile = 1, 1, 1, 1, 1, 1,
restart = .false.,
restart_interval = 5000,
io_form_history = 10
io_form_restart = 10
io_form_input = 10
io_form_boundary = 10
debug_level = 0
/
&domains
time_step = 162,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 1,
e_we = 344, 139, 166, 115, 112, 118,
e_sn = 179, 94, 133, 124, 199, 112,
e_vert = 38, 38, 38, 38, 38, 38,
eta_levels = 1.000, 0.994, 0.983, 0.968, 0.950, 0.930, 0.908, 0.882, 0.853, 0.821, 0.788, 0.752, 0.715, 0.677, 0.637, 0.597, 0.557, 0.517, 0.477, 0.438, 0.401, 0.365, 0.332, 0.302, 0.274, 0.248, 0.224, 0.201, 0.179, 0.158, 0.138, 0.118, 0.098, 0.078, 0.058, 0.038, 0.018, 0.000,
p_top_requested = 5000,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
dx = 27000, 9000, 9000, 9000, 9000, 9000,
dy = 27000, 9000, 9000, 9000, 9000, 9000,
grid_id = 1, 2, 3, 4, 5, 6,
parent_id = 1, 1, 1, 1, 1, 1,
i_parent_start = 1, 127, 153, 186, 227, 161,
j_parent_start = 1, 75, 21, 66, 12, 112,
parent_grid_ratio = 1, 3, 3, 3, 3, 3,
parent_time_step_ratio = 1, 3, 3, 3, 3, 3,
feedback = 1,
smooth_option = 0,
/
&physics
mp_physics = 3, 3, 3, 3, 3, 3,
ra_lw_physics = 1, 1, 1, 1, 1, 1,
ra_sw_physics = 1, 1, 1, 1, 1, 1,
radt = 30, 30, 30, 30, 30, 30,
sf_sfclay_physics = 1, 1, 1, 1, 1, 1,
sf_surface_physics = 2, 2, 2, 2, 2, 2,
bl_pbl_physics = 1, 1, 1, 1, 1, 1,
bldt = 0, 0, 0, 0, 0, 0,
cu_physics = 3, 3, 0, 0, 0, 0,
cudt = 5, 5, 5, 5, 5, 5,
isfflx = 1,
ifsnow = 0,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
sf_urban_physics = 0,
/
&fdda
/
&dynamics
w_damping = 1,
use_baseparam_fr_nml = .t.
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0, 0, 0, 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12, 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000., 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2, 0.2, 0.2, 0.2,
khdif = 0, 0, 0, 0, 0, 0,
kvdif = 0, 0, 0, 0, 0, 0,
non_hydrostatic = .true., .true., .true., .true.,.true., .true.,
moist_adv_opt = 1, 1, 1, 1, 1, 1,
scalar_adv_opt = 1, 1, 1, 1, 1, 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false., .false.,.false., .false.,
nested = .false., .true., .true., .true.,.true., .true.,
/
&grib2
background_proc_id = 255
forecast_proc_id = 255
production_status = 255
compression = 41
/
&namelist_quilt
nio_tasks_per_group = 4,
nio_groups = 1,
/
When run ./wrf.exe
msg is coming
could not find metadata field named WRF_GLOBAL
FATAL CALLED FROM FILE: <stdin> LINE: 70
program wrf: error opening wrfinput_d01 for reading ierr = -408
Regards
KS
_______________________________________________
Wrf-users mailing list
Wrf-users at ucar.edu<mailto:Wrf-users at ucar.edu>
http://mailman.ucar.edu/mailman/listinfo/wrf-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ucar.edu/pipermail/wrf-users/attachments/20160301/4eaba7aa/attachment-0001.html
More information about the Wrf-users
mailing list