[Wrf-users] RUNNING WRFV 3.4.1
Nikhil
nikhilgarg.gju at gmail.com
Mon Feb 29 16:02:09 MST 2016
In your mamelist, you are using io_form_input and io_form_boundary as 10, which probably means that you are providing input file in grib format. does that seem right, i suppose when u run real, u get netcdf file or even from metgrid, how about putting these back to 2 which is for netcdf and then see if it works. also did u compile wrf woth jasper support, if not then u might have to add jasper related flags to configure_new.pl and recompile wrf
> On 29 Feb 2016, at 7:53 PM, kumar saurabh <sokhiprit1982 at gmail.com> wrote:
>
> Dear team,
>
> Till now m running wrfv3.4.1 and getting wrfout netcdf well.
>
> But I want output as a grib2 format. I tried many times for changing io_form_x =10 but fail. Anybody pls give step by step procedure with name list.wps and name list.input file sample for getting output as grib2 format. My namelist.input as follows:-
>
>
> &time_control
> run_days = 1,
> run_hours = 0,
> run_minutes = 0,
> run_seconds = 0,
> start_year = 2016, 2016, 2016, 2016,2016, 2016,
> start_month = 02, 02, 02, 02,02, 02,
> start_day = 24, 24, 24, 24,24, 24,
> start_hour = 00, 00, 00, 00,00, 00,
> start_minute = 00, 00, 00, 00, 00, 00,
> start_second = 00, 00, 00, 00, 00, 00,
> end_year = 2016, 2016, 2016, 2016, 2016, 2016,
> end_month = 02, 02, 02, 02, 02, 02,
> end_day = 25, 27, 27, 27, 27, 27,
> end_hour = 00, 00, 00, 00, 00, 00,
> end_minute = 00, 00, 00, 00, 00, 00,
> end_second = 00, 00, 00, 00, 00, 00,
> interval_seconds = 21600
> input_from_file = .true.,.true.,.true.,.true.,.true.,.true.,
> history_interval = 360, 360, 360, 360, 360, 360,
> frames_per_outfile = 1, 1, 1, 1, 1, 1,
> restart = .false.,
> restart_interval = 5000,
> io_form_history = 10
> io_form_restart = 10
> io_form_input = 10
> io_form_boundary = 10
> debug_level = 0
> /
>
> &domains
> time_step = 162,
> time_step_fract_num = 0,
> time_step_fract_den = 1,
> max_dom = 1,
> e_we = 344, 139, 166, 115, 112, 118,
> e_sn = 179, 94, 133, 124, 199, 112,
> e_vert = 38, 38, 38, 38, 38, 38,
> eta_levels = 1.000, 0.994, 0.983, 0.968, 0.950, 0.930, 0.908, 0.882, 0.853, 0.821, 0.788, 0.752, 0.715, 0.677, 0.637, 0.597, 0.557, 0.517, 0.477, 0.438, 0.401, 0.365, 0.332, 0.302, 0.274, 0.248, 0.224, 0.201, 0.179, 0.158, 0.138, 0.118, 0.098, 0.078, 0.058, 0.038, 0.018, 0.000,
> p_top_requested = 5000,
> num_metgrid_levels = 27,
> num_metgrid_soil_levels = 4,
> dx = 27000, 9000, 9000, 9000, 9000, 9000,
> dy = 27000, 9000, 9000, 9000, 9000, 9000,
> grid_id = 1, 2, 3, 4, 5, 6,
> parent_id = 1, 1, 1, 1, 1, 1,
> i_parent_start = 1, 127, 153, 186, 227, 161,
> j_parent_start = 1, 75, 21, 66, 12, 112,
> parent_grid_ratio = 1, 3, 3, 3, 3, 3,
> parent_time_step_ratio = 1, 3, 3, 3, 3, 3,
> feedback = 1,
> smooth_option = 0,
> /
>
> &physics
> mp_physics = 3, 3, 3, 3, 3, 3,
> ra_lw_physics = 1, 1, 1, 1, 1, 1,
> ra_sw_physics = 1, 1, 1, 1, 1, 1,
> radt = 30, 30, 30, 30, 30, 30,
> sf_sfclay_physics = 1, 1, 1, 1, 1, 1,
> sf_surface_physics = 2, 2, 2, 2, 2, 2,
> bl_pbl_physics = 1, 1, 1, 1, 1, 1,
> bldt = 0, 0, 0, 0, 0, 0,
> cu_physics = 3, 3, 0, 0, 0, 0,
> cudt = 5, 5, 5, 5, 5, 5,
> isfflx = 1,
> ifsnow = 0,
> icloud = 1,
> surface_input_source = 1,
> num_soil_layers = 4,
> sf_urban_physics = 0,
> /
>
> &fdda
> /
>
> &dynamics
> w_damping = 1,
> use_baseparam_fr_nml = .t.
> diff_opt = 1,
> km_opt = 4,
> diff_6th_opt = 0, 0, 0, 0, 0, 0,
> diff_6th_factor = 0.12, 0.12, 0.12, 0.12, 0.12, 0.12,
> base_temp = 290.
> damp_opt = 0,
> zdamp = 5000., 5000., 5000., 5000., 5000., 5000.,
> dampcoef = 0.2, 0.2, 0.2, 0.2, 0.2, 0.2,
> khdif = 0, 0, 0, 0, 0, 0,
> kvdif = 0, 0, 0, 0, 0, 0,
> non_hydrostatic = .true., .true., .true., .true.,.true., .true.,
> moist_adv_opt = 1, 1, 1, 1, 1, 1,
> scalar_adv_opt = 1, 1, 1, 1, 1, 1,
> /
>
> &bdy_control
> spec_bdy_width = 5,
> spec_zone = 1,
> relax_zone = 4,
> specified = .true., .false.,.false., .false.,.false., .false.,
> nested = .false., .true., .true., .true.,.true., .true.,
> /
>
> &grib2
> background_proc_id = 255
> forecast_proc_id = 255
> production_status = 255
> compression = 41
> /
>
> &namelist_quilt
> nio_tasks_per_group = 4,
> nio_groups = 1,
> /
>
> When run ./wrf.exe
>
> msg is coming
> could not find metadata field named WRF_GLOBAL
> FATAL CALLED FROM FILE: <stdin> LINE: 70
> program wrf: error opening wrfinput_d01 for reading ierr = -408
>
>
> Regards
> KS
>
>
>
>
> _______________________________________________
> Wrf-users mailing list
> Wrf-users at ucar.edu
> http://mailman.ucar.edu/mailman/listinfo/wrf-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ucar.edu/pipermail/wrf-users/attachments/20160301/9f243a95/attachment-0001.html
More information about the Wrf-users
mailing list