[ncl-install] NCARG Issue with ncargf77
OMAR SANCHEZ CAMACHO
cmomar_alf at comunidad.unam.mx
Thu Jul 22 14:08:09 MDT 2021
Thanks a lot for your response.
I still need help because I don't run *.f programs with NCARG, when I type the command:
$ ncargf77 drag_vs_step.f
Output is:
"/home/conda/feedstock_root/build_artifacts/ncl_1602173391809/_build_env/bin/x86_64-conda-linux-gnu-gfortran -fPIC -fno-second-underscore -fno-range-check -fopenmp -O -L/home/omar13/anaconda3/envs/ncl_stable/lib -Wl,-O2 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,--disable-new-dtags -Wl,--gc-sections -Wl,-rpath,/home/omar13/anaconda3/envs/ncl_stable/lib -Wl,-rpath-link,/home/omar13/anaconda3/envs/ncl_stable/lib -L/home/omar13/anaconda3/envs/ncl_stable/lib drag_vs_step.f -L/home/omar13/anaconda3/envs/ncl_stable/lib -L/usr/X11R6/lib64 -lncarg -lncarg_gks -lncarg_c -lX11 -lXext -lcairo -lXrender -lfontconfig -lpixman-1 -lfreetype -lexpat -lpng -lz -lbz2
/home/conda/feedstock_root/build_artifacts/ncl_1602173391809/_build_env/bin/x86_64-conda-linux-gnu-gfortran: Command not found."
And when I try to run an example of NCARG:
$ ncargex fcover
Output is:
"NCAR Graphics Fortran Fundamentals Example <fcover>
Copying fcover.f
Copying fcover.dat
Compiling and linking...
/home/conda/feedstock_root/build_artifacts/ncl_1602173391809/_build_env/bin/x86_64-conda-linux-gnu-gfortran -fPIC -fno-second-underscore -fno-range-check -fopenmp -O -L/home/omar13/anaconda3/envs/ncl_stable/lib -Wl,-O2 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,--disable-new-dtags -Wl,--gc-sections -Wl,-rpath,/home/omar13/anaconda3/envs/ncl_stable/lib -Wl,-rpath-link,/home/omar13/anaconda3/envs/ncl_stable/lib -L/home/omar13/anaconda3/envs/ncl_stable/lib -o fcover fcover.f -L/home/omar13/anaconda3/envs/ncl_stable/lib -L/usr/X11R6/lib64 -lncarg -lncarg_gks -lncarg_c -lX11 -lXext -lcairo -lXrender -lfontconfig -lpixman-1 -lfreetype -lexpat -lpng -lz -lbz2
/home/conda/feedstock_root/build_artifacts/ncl_1602173391809/_build_env/bin/x86_64-conda-linux-gnu-gfortran: Command not found.
The compile and link failed."
I sure that the example fcover and the program
drag_vs_step.f are right
I am sure that my program (drag_vs_step.f) and the example (fcover) are fine because I can compile them without any problem on another computer with NCARG. So I don't know what is the problem here.
Kind regards.
Omar Sánchez C.
________________________________
De: Orhan Eroglu <oero at ucar.edu>
Enviado: jueves, 22 de julio de 2021 8:41 a. m.
Para: OMAR SANCHEZ CAMACHO
Cc: ncl-install at mailman.ucar.edu
Asunto: Re: [ncl-install] NCARG Issue with ncargf77
Hi Omar,
I am sorry to hear inconvenience you had!
Before moving forward, I'd like to clarify some thing about your environment variables first. Even though you say that "I don't have either NCARG_ROOT, or NCARG_BIN, NCARG_LIB, and NCARG_INCLUDE set", you seem to have NCARG_ROOT variable set properly as we can see from
Output:
NCARG_ROOT=/home/omar13/anaconda3/envs/ncl_stable
as well as you were able to run successfully
$ ncl $NCARG_ROOT/lib/ncarg/nclex/gsun/gsun02n.ncl
$ ncl $NCARG_ROOT/lib/ncarg/nclex/nug/NUG_multi_timeseries.ncl
If we agree on this and you still have your issues running ncargex, I am happy to further help.
Best,
On Tue, Jun 22, 2021 at 10:15 AM OMAR SANCHEZ CAMACHO via ncl-install <ncl-install at mailman.ucar.edu<mailto:ncl-install at mailman.ucar.edu>> wrote:
Hello,
I am trying to compile and execute and example with NCARG following the instructions on "Chapter 2: Five quick steps for creating and viewing your plot", but I have a problem when I execute:
$ env
I don't have either NCARG_ROOT, or NCARG_BIN, NCARG_LIB, and NCARG_INCLUDE set, I don't know why, because I followed the installation instructions (I've installed with Conda), even I tested NCL with:
$ ncl -V
$ ncl $NCARG_ROOT/lib/ncarg/nclex/gsun/gsun02n.ncl
$ ncl $NCARG_ROOT/lib/ncarg/nclex/nug/NUG_multi_timeseries.ncl
and all of them works, but when I execute:
$ ncargex fcover
Output is:
"NCAR Graphics Fortran Fundamentals Example <fcover>
Copying fcover.f
Copying fcover.dat
Compiling and linking...
/home/conda/feedstock_root/build_artifacts/ncl_1602173391809/_build_env/bin/x86_64-conda-linux-gnu-gfortran -fPIC -fno-second-underscore -fno-range-check -fopenmp -O -L/home/omar13/anaconda3/envs/ncl_stable/lib -Wl,-O2 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,--disable-new-dtags -Wl,--gc-sections -Wl,-rpath,/home/omar13/anaconda3/envs/ncl_stable/lib -Wl,-rpath-link,/home/omar13/anaconda3/envs/ncl_stable/lib -L/home/omar13/anaconda3/envs/ncl_stable/lib -o fcover fcover.f -L/home/omar13/anaconda3/envs/ncl_stable/lib -L/usr/X11R6/lib64 -lncarg -lncarg_gks -lncarg_c -lX11 -lXext -lcairo -lXrender -lfontconfig -lpixman-1 -lfreetype -lexpat -lpng -lz -lbz2
/home/conda/feedstock_root/build_artifacts/ncl_1602173391809/_build_env/bin/x86_64-conda-linux-gnu-gfortran: Command not found.
The compile and link failed."
The same issue is also present when I compile my own *.f program (I am sure it is okay, because I can run it with other computer with NCL):
$ ncargf77 drag_vs_step.f
Output is:
"/home/conda/feedstock_root/build_artifacts/ncl_1602173391809/_build_env/bin/x86_64-conda-linux-gnu-gfortran -fPIC -fno-second-underscore -fno-range-check -fopenmp -O -L/home/omar13/anaconda3/envs/ncl_stable/lib -Wl,-O2 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,--disable-new-dtags -Wl,--gc-sections -Wl,-rpath,/home/omar13/anaconda3/envs/ncl_stable/lib -Wl,-rpath-link,/home/omar13/anaconda3/envs/ncl_stable/lib -L/home/omar13/anaconda3/envs/ncl_stable/lib drag_vs_step.f -L/home/omar13/anaconda3/envs/ncl_stable/lib -L/usr/X11R6/lib64 -lncarg -lncarg_gks -lncarg_c -lX11 -lXext -lcairo -lXrender -lfontconfig -lpixman-1 -lfreetype -lexpat -lpng -lz -lbz2
/home/conda/feedstock_root/build_artifacts/ncl_1602173391809/_build_env/bin/x86_64-conda-linux-gnu-gfortran: Command not found."
________________________________________________________
Outputs from typing the following commands from a UNIX terminal window:
$ conda list -n ncl_stable
Output:
# packages in environment at /home/omar13/anaconda3/envs/ncl_stable:
#
# Name Version Build Channel
_libgcc_mutex 0.1 conda_forge conda-forge
_openmp_mutex 4.5 1_gnu conda-forge
boost-cpp 1.74.0 h9359b55_0 conda-forge
bzip2 1.0.8 h7f98852_4 conda-forge
c-ares 1.17.1 h7f98852_1 conda-forge
ca-certificates 2021.5.30 ha878542_0 conda-forge
cairo 1.16.0 h488836b_1006 conda-forge
cfitsio 3.470 h2e3daa1_7 conda-forge
curl 7.76.1 h979ede3_1 conda-forge
esmf 8.0.1 nompi_hcaa3220_2 conda-forge
expat 2.4.1 h9c3ff4c_0 conda-forge
fontconfig 2.13.1 hba837de_1005 conda-forge
freetype 2.10.4 h0708190_1 conda-forge
freexl 1.0.6 h7f98852_0 conda-forge
geos 3.8.1 he1b5a44_0 conda-forge
geotiff 1.6.0 h5d11630_3 conda-forge
gettext 0.19.8.1 h0b5b191_1005 conda-forge
giflib 5.2.1 h36c2ea0_2 conda-forge
gsl 2.6 he838d99_2 conda-forge
hdf4 4.2.15 h10796ff_3 conda-forge
hdf5 1.10.6 nompi_h7c3c948_1111 conda-forge
hdfeos2 2.20 h64bfcee_1000 conda-forge
hdfeos5 5.1.16 hb4ce793_7 conda-forge
icu 67.1 he1b5a44_0 conda-forge
jasper 1.900.1 h07fcdf6_1006 conda-forge
jpeg 9d h36c2ea0_0 conda-forge
json-c 0.13.1 hbfbb72e_1002 conda-forge
kealib 1.4.14 hcc255d8_2 conda-forge
krb5 1.17.2 h926e7f8_0 conda-forge
libblas 3.9.0 8_openblas conda-forge
libcblas 3.9.0 8_openblas conda-forge
libcurl 7.76.1 hc4aaa36_1 conda-forge
libdap4 3.20.6 hd7c4107_2 conda-forge
libedit 3.1.20191231 he28a2e2_2 conda-forge
libev 4.33 h516909a_1 conda-forge
libffi 3.3 h58526e2_2 conda-forge
libgcc-ng 9.3.0 h2828fa1_19 conda-forge
libgdal 3.1.4 h50e41a3_1 conda-forge
libgfortran-ng 7.5.0 h14aa051_19 conda-forge
libgfortran4 7.5.0 h14aa051_19 conda-forge
libglib 2.68.3 h3e27bee_0 conda-forge
libgomp 9.3.0 h2828fa1_19 conda-forge
libiconv 1.16 h516909a_0 conda-forge
libkml 1.3.0 h238a007_1013 conda-forge
libnetcdf 4.7.4 nompi_h56d31a8_107 conda-forge
libnghttp2 1.43.0 h812cca2_0 conda-forge
libopenblas 0.3.12 pthreads_hb3c22a3_1 conda-forge
libpng 1.6.37 h21135ba_2 conda-forge
libpq 12.3 h255efa7_3 conda-forge
librttopo 1.1.0 hb271727_4 conda-forge
libspatialite 5.0.1 h6ec7341_0 conda-forge
libssh2 1.9.0 ha56f1ee_6 conda-forge
libstdcxx-ng 9.3.0 h6de172a_19 conda-forge
libtiff 4.2.0 hbd63e13_2 conda-forge
libuuid 2.32.1 h7f98852_1000 conda-forge
libwebp-base 1.2.0 h7f98852_2 conda-forge
libxcb 1.13 h7f98852_1003 conda-forge
libxml2 2.9.10 h68273f3_2 conda-forge
lz4-c 1.9.3 h9c3ff4c_0 conda-forge
ncl 6.6.2 h087f628_23 conda-forge
ncurses 6.2 h58526e2_4 conda-forge
netcdf-fortran 4.5.3 nompi_hfef6a68_101 conda-forge
openjpeg 2.4.0 hb52868f_1 conda-forge
openssl 1.1.1k h7f98852_0 conda-forge
pcre 8.45 h9c3ff4c_0 conda-forge
pixman 0.38.0 h516909a_1003 conda-forge
poppler 0.89.0 h2de54a5_5 conda-forge
poppler-data 0.4.10 0 conda-forge
postgresql 12.3 hc2f5b80_3 conda-forge
proj 7.1.1 h966b41f_3 conda-forge
pthread-stubs 0.4 h36c2ea0_1001 conda-forge
readline 8.1 h46c0cb4_0 conda-forge
sqlite 3.36.0 h9cd32fc_0 conda-forge
tiledb 2.1.6 h91fcb0e_1 conda-forge
tk 8.6.10 h21135ba_1 conda-forge
tzcode 2021a h7f98852_1 conda-forge
udunits2 2.2.27.27 h975c496_1 conda-forge
xerces-c 3.2.3 hfe33f54_1 conda-forge
xorg-imake 1.0.7 0 conda-forge
xorg-kbproto 1.0.7 h7f98852_1002 conda-forge
xorg-libice 1.0.10 h7f98852_0 conda-forge
xorg-libsm 1.2.3 hd9c2040_1000 conda-forge
xorg-libx11 1.6.12 h36c2ea0_0 conda-forge
xorg-libxau 1.0.9 h7f98852_0 conda-forge
xorg-libxaw 1.0.14 h7f98852_0 conda-forge
xorg-libxdmcp 1.1.3 h7f98852_0 conda-forge
xorg-libxext 1.3.4 h516909a_0 conda-forge
xorg-libxmu 1.1.3 h516909a_0 conda-forge
xorg-libxpm 3.5.13 h516909a_0 conda-forge
xorg-libxrender 0.9.10 h516909a_1002 conda-forge
xorg-libxt 1.1.5 h516909a_1003 conda-forge
xorg-makedepend 1.0.6 he1b5a44_1 conda-forge
xorg-renderproto 0.11.1 h7f98852_1002 conda-forge
xorg-xextproto 7.3.0 h7f98852_1002 conda-forge
xorg-xproto 7.0.31 h7f98852_1007 conda-forge
xz 5.2.5 h516909a_1 conda-forge
zlib 1.2.11 h516909a_1010 conda-forge
zstd 1.4.9 ha95c52a_0 conda-forge
$ conda --version
Output:
conda 4.10.1
$ which ncl
Output:
/home/omar13/anaconda3/envs/ncl_stable/bin/ncl
$ ncl -V
Output:
6.6.2
$ env | grep NCARG
Output:
NCARG_ROOT=/home/omar13/anaconda3/envs/ncl_stable
_______________________________________________
ncl-install mailing list
List instructions, subscriber options, unsubscribe:
https://mailman.ucar.edu/mailman/listinfo/ncl-install
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.ucar.edu/pipermail/ncl-install/attachments/20210722/30fc9add/attachment-0001.html>
More information about the ncl-install
mailing list