[ncl-install] Problem with Building NCL-6.2.0 from Source Code
Mary Haley
haley at ucar.edu
Fri Apr 18 09:08:54 MDT 2014
Hi Jack,
It looks like it either can't find your ESMF_RegridWeightGen binary, or it is not working.
What does the following report:
which ncl
which ESMF_RegridWeightGen
ESMF_RegridWeightGen --version
Also, did a PET* file get created? If so, can you email it to me?
Thanks,
--Mary
On Apr 18, 2014, at 7:45 AM, Shi-Pei Hsu <hsushipei1 at gmail.com> wrote:
>
> Excuse me, I forgot to send this email to ncl-install, so i re-send this again
>
> Hi Mary,
>
> I've built ESMF-6.3.0r myself and copy the installed "ESMF_RegridWeightGen" binary from the original ESMF build directory to $NCARG_ROOT/bin, and then i ran again the "ESMF_regrid_1.ncl" script. The output was:
>
> Copyright (C) 1995-2014 - All Rights Reserved
> University Corporation for Atmospheric Research
> NCAR Command Language Version 6.2.0
> The use of this software is governed by a License Agreement.
> See http://www.ncl.ucar.edu/ for more details.
>
> Variable: temp
> Type: float
> Total Size: 46336 bytes
> 11584 values
> Number of Dimensions: 4
> Dimensions and sizes: [TIME | 1] x [DEPTH | 1] x [LAT | 64] x [LON | 181]
> Coordinates:
> TIME: [30.44000053405762..30.44000053405762]
> DEPTH: [ 7.5.. 7.5]
> LAT: [-59.9900016784668..58.9700202941895]
> LON: [-0.5..359.5]
> Number Of Attributes: 5
> missing_value : -9.99e+33
> _FillValue : -9.99e+33
> long_name : TEMPERATURE
> history : From ncep_sd_corrected_monthly_means
> units : deg. C
> (0) ESMF_regrid_gen_weights: 'ESMF_RegridWeightGen' was not successful.
>
> Does the " 'ESMF_RegridWeightGen' was not successful" mean the failure of building EFMS?
>
> P.S. During the ESMF building process, the software ask me to run"gmake check" to test the build, but it says "no failure"
> and there wasnt any "Error"
>
> Thank you very much!!
>
> Best regards,
> Jack Hsu
>
>
> On Fri, Apr 18, 2014 at 2:33 PM, Shi-Pei Hsu <hsushipei1 at gmail.com> wrote:
> Hi Mary,
>
> I've built ESMF-6.3.0r myself and copy the installed "ESMF_RegridWeightGen" binary from the original ESMF build directory to $NCARG_ROOT/bin, and then i ran again the "ESMF_regrid_1.ncl" script. The output was:
>
> Copyright (C) 1995-2014 - All Rights Reserved
> University Corporation for Atmospheric Research
> NCAR Command Language Version 6.2.0
> The use of this software is governed by a License Agreement.
> See http://www.ncl.ucar.edu/ for more details.
>
> Variable: temp
> Type: float
> Total Size: 46336 bytes
> 11584 values
> Number of Dimensions: 4
> Dimensions and sizes: [TIME | 1] x [DEPTH | 1] x [LAT | 64] x [LON | 181]
> Coordinates:
> TIME: [30.44000053405762..30.44000053405762]
> DEPTH: [ 7.5.. 7.5]
> LAT: [-59.9900016784668..58.9700202941895]
> LON: [-0.5..359.5]
> Number Of Attributes: 5
> missing_value : -9.99e+33
> _FillValue : -9.99e+33
> long_name : TEMPERATURE
> history : From ncep_sd_corrected_monthly_means
> units : deg. C
> (0) ESMF_regrid_gen_weights: 'ESMF_RegridWeightGen' was not successful.
>
> Does the " 'ESMF_RegridWeightGen' was not successful" mean the failure of building EFMS?
>
> P.S. During the ESMF building process, the software ask me to run"gmake check" to test the build, but it says "no failure"
> and there wasnt any "Error"
>
> Thank you very much!!
>
> Best regards,
> Jack Hsu
>
>
> On Thu, Apr 17, 2014 at 10:01 PM, Shi-Pei Hsu <hsushipei1 at gmail.com> wrote:
> Hi Mary,
>
> Thanks very much for your help!
>
> The "ncl" binary can be found under $NCARG_ROOT/bin which means the main NCL build is done.
>
> However, it seems the ESMF build was not successful.
>
> I failed to run script "ESMF_regrid_1.ncl" provided by NCL official website
>
> ,and the error message was:
>
> sh: ESMF_RegridWeightGen: command not found
> fatal:The result of the conditional expression yields a missing value. NCL can not determine branch, see ismissing function
> fatal:["Execute.c":8567]:Execute: Error occurred at or near line 2434 in file $NCARG_ROOT/lib/ncarg/nclscripts/esmf/ESMF_regridding.ncl
>
> fatal:["Execute.c":8567]:Execute: Error occurred at or near line 3471 in file $NCARG_ROOT/lib/ncarg/nclscripts/esmf/ESMF_regridding.ncl
>
> fatal:["Execute.c":8567]:Execute: Error occurred at or near line 66 in file ESMF_regrid_1.ncl
>
> I couldn't find "ESMF_RegridWeightGen" binary in $NCARG_ROOT/bin
>
> i checked the make-output(attached in this email) file for any "Error", but there wasn't
>
> So don't know what's wrong with ESMF
>
> Thank you!
>
> Sincerely Yours,
> Jack Hsu
>
>
>
>
> On Mon, Apr 14, 2014 at 10:53 PM, Mary Haley <haley at ucar.edu> wrote:
> Dear Jack-Hsu,
>
> The "-ll" is for linking in the lex library, which should be called "libl.a" on your system.
>
> On some systems, this library might be a link to libfl.a, which is the flex library. For example:
>
> lrwxrwxrwx. 1 root root 7 Jun 19 2013 /usr/lib64/libl.a -> libfl.a
>
>
> My guess is that you need to install lex/flex and/or create a link between libfl.a and libl.a
>
> --Mary
>
> On Apr 7, 2014, at 7:36 PM, Shi-Pei Hsu <hsushipei1 at gmail.com> wrote:
>
> > Dear all,
> >
> > I'd like to build NCL-6.2.0 with ESMF support.
> >
> > However, the native gcc(4.1.2) in my system(SUSE Linux 10 SP2) is too old for ESMF.
> >
> > So I built a newer gcc(4.4.7) and built NCL-6.2.0 with it.
> >
> > Unfortunately, it failed, and I checked the "make-output file". I got the following "Error" message
> >
> > gcc -ansi -fPIC -fopenmp -O -o wrapit77 y.tab.o lex.yy.o Symbol.o wrapit_main.o -L/data1/hsushipei/software/ncl-6.2.0-testing/lib -L/data1/hsushipei/software/ncl-6.2.0-testing/lib -L/usr/X11R6/lib64 -ll
> > /usr/bin/ld: cannot find -ll
> > collect2: ld return 1
> > make[4]: *** [wrapit77] Error 1
> > make[4]: Leaving directory `/data1/hsushipei/software/ncl-6.2.0-testing/src/ncl_ncarg-6.2.0/ni/src/mkwrap'
> >
> > Thanks for your help!
> >
> > Sincerely Yours,
> > Jack-Hsu
> >
> > National Taiwan University
> >
> > <make-output.tar.bz2>_______________________________________________
> > ncl-install mailing list
> > List instructions, subscriber options, unsubscribe:
> > http://mailman.ucar.edu/mailman/listinfo/ncl-install
>
>
>
>
More information about the ncl-install
mailing list