[ncl-install] addfile and HDF5 library version mismatch
Mary Haley
haley at ucar.edu
Fri Jun 17 11:23:08 MDT 2011
H Madeline,
Thanks for your patience.
I verified that I had the same problem as you, and created a new binary for you to try.
Can you download this new file, and install it the same way you did before, and let me know if it works:
ftp ftp.ucar.edu
<log in as "anonymous">
<Use email address as password>
cd /pub/scd/haley
get ncl_ncarg-6.0.0.Linux_RedHat_x86_64_nodap_gcc412.tar.gz
quit
The instructions for installing the software are the same as before:
http://www.ncl.ucar.edu/Download/install.shtml
--Mary
On Jun 13, 2011, at 3:59 PM, Madeline Miller wrote:
> Hi Mary,
>
> The test script fails on the line:
> fout = addfile(filename,"c")
>
> with error output:
>
> Warning! ***HDF5 library version mismatched error***
> The HDF5 header files used to compile this application do not match
> the version used by the HDF5 library to which this application is linked.
> Data corruption or segmentation faults may occur if the application continues.
> This can happen when an application was compiled by one version of HDF5 but
> linked with a different version of static or shared HDF5 library.
> You should recompile the application or check your shared library related
> settings such as 'LD_LIBRARY_PATH'.
> You can, at your own risk, disable this warning by setting the environment
> variable 'HDF5_DISABLE_VERSION_CHECK' to a value of '1'.
> Setting it to 2 or higher will suppress the warning messages totally.
> Headers are 1.8.5, library is 1.8.6
> SUMMARY OF THE HDF5 CONFIGURATION
> =================================
>
> General Information:
> -------------------
> HDF5 Version: 1.8.6
> Configured on: Mon May 23 09:21:22 MDT 2011
> Configured by: haley at mirage1
> Configure mode: production
> Host system: x86_64-unknown-linux-gnu
> Uname information: Linux mirage1 2.6.18-194.17.4.el5 #1 SMP Wed Oct 20 13:03:08 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
> Byte sex: little-endian
> Libraries:
> Installation point: /fs/blizzard/contrib/ncl-6.0.0/external
>
> Compiling Options:
> ------------------
> Compilation Mode: production
> C Compiler: /usr/bin/gcc ( gcc (GCC) 4.1.2 20080704 )
> CFLAGS: -fPIC
> H5_CFLAGS: -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -O3 -fomit-frame-pointer -finline-functions
> AM_CFLAGS:
> CPPFLAGS: -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE
> H5_CPPFLAGS: -D_POSIX_SOURCE -DNDEBUG -UH5_DEBUG_API
> AM_CPPFLAGS: -I/fs/blizzard/contrib/ncl-6.0.0/external/include -I/fs/blizzard/contrib/ncl-6.0.0/external/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_BSD_SOURCE
> Shared Libraries: no
> Static Libraries: yes
> Statically Linked Executables: no
> LDFLAGS:
> AM_LDFLAGS: -L/fs/blizzard/contrib/ncl-6.0.0/external/lib -L/fs/blizzard/contrib/ncl-6.0.0/external/lib
> Extra libraries: -lsz -lz -lm
> Archiver: ar
> Ranlib: ranlib
> Debugged Packages:
> API Tracing: no
>
> Languages:
> ----------
> Fortran: no
> C++: no
>
> Features:
> ---------
> Parallel HDF5: no
> High Level library: yes
> Threadsafety: no
> Default API Mapping: v18
> With Deprecated Public Symbols: yes
> I/O filters (external): deflate(zlib),szip(encoder)
> I/O filters (internal): shuffle,fletcher32,nbit,scaleoffset
> MPE: no
> Direct VFD: no
> dmalloc: no
> Clear file buffers before write: yes
> Using memory checker: no
> Function Stack Tracing: no
> GPFS: no
> Strict File Format Checks: no
> Optimization Instrumentation: no
> Large File Support (LFS): yes
> H5dump Packed Bits: yes
> Bye...
> Aborted
>
>
> Madeline
>
> 2011/6/13 Mary Haley <haley at ucar.edu>
> Hi Madeline,
>
> My sincere apologies. I responded to this on Friday (I think), but either I forgot to hit "send", or it just never got sent.
>
> In my response, I asked you to run this sample test script and let me know what happens:
>
> filename = "test_nc4.nc" ; name of netcdf 4 file
> x = random_uniform(-100,100,(/10,64,128/)) ; dummy data
>
> if(isfilepresent(filename)) then
> system("rm " + filename)
> end if
>
> ;---Open netCDF-4 file
> setfileoption("nc","format","netcdf4classic")
> fout = addfile(filename,"c")
>
> ;---Write to netCDF-4 file
> fout->x = x
> delete(fout) ; Close the file
>
> ;---Read variable back in
> fin = addfile(filename,"r")
> xin = fin->x
>
> diffs = xin-x
> print("min/max diffs (should be 0) = " + min(diffs) + "/" + max(diffs))
>
>
> On the UNIX command line, if you type:
>
> file test_nc4.nc
>
> It should say something like:
>
> test_nc4.nc: Hierarchical Data Format (version 5) data
>
> Let me know if you have any luck with this.
>
> --Mary
>
> On Jun 8, 2011, at 4:55 PM, Madeline Miller wrote:
>
>> Hello,
>>
>> I just installed NCL on a Linux Red Hat workstation. I used the pre-compiled binary ncl_ncarg-6.0.0.Linux_RedHat_x86_64_nodap_gcc412.tar, which matches my architecture and version of gcc.
>>
>> I ran all the tests under the download instructions and they all worked fine. Then, I tried opening a .nc file in NCL using the command
>> in=addfile("filename.nc","r").
>>
>> I created the .nc file using MATLAB on my Linux workstation, and am able to read it on my Mac laptop using another version of NCL installed there.
>>
>> However, on my Linux workstation it returns:
>>
>>
>> Warning! ***HDF5 library version mismatched error***
>> The HDF5 header files used to compile this application do not match
>> the version used by the HDF5 library to which this application is linked.
>> Data corruption or segmentation faults may occur if the application continues.
>> This can happen when an application was compiled by one version of HDF5 but
>> linked with a different version of static or shared HDF5 library.
>> You should recompile the application or check your shared library related
>> settings such as 'LD_LIBRARY_PATH'.
>> You can, at your own risk, disable this warning by setting the environment
>> variable 'HDF5_DISABLE_VERSION_CHECK' to a value of '1'.
>> Setting it to 2 or higher will suppress the warning messages totally.
>> Headers are 1.8.5, library is 1.8.6
>> SUMMARY OF THE HDF5 CONFIGURATION
>> =================================
>>
>> General Information:
>> -------------------
>> HDF5 Version: 1.8.6
>> Configured on: Mon May 23 09:21:22 MDT 2011
>> Configured by: haley at mirage1
>> Configure mode: production
>> Host system: x86_64-unknown-linux-gnu
>> Uname information: Linux mirage1 2.6.18-194.17.4.el5 #1 SMP Wed Oct 20 13:03:08 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
>> Byte sex: little-endian
>> Libraries:
>> Installation point: /fs/blizzard/contrib/ncl-6.0.0/external
>>
>> Compiling Options:
>> ------------------
>> Compilation Mode: production
>> C Compiler: /usr/bin/gcc ( gcc (GCC) 4.1.2 20080704 )
>> CFLAGS: -fPIC
>> H5_CFLAGS: -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -O3 -fomit-frame-pointer -finline-functions
>> AM_CFLAGS:
>> CPPFLAGS: -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE
>> H5_CPPFLAGS: -D_POSIX_SOURCE -DNDEBUG -UH5_DEBUG_API
>> AM_CPPFLAGS: -I/fs/blizzard/contrib/ncl-6.0.0/external/include -I/fs/blizzard/contrib/ncl-6.0.0/external/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_BSD_SOURCE
>> Shared Libraries: no
>> Static Libraries: yes
>> Statically Linked Executables: no
>> LDFLAGS:
>> AM_LDFLAGS: -L/fs/blizzard/contrib/ncl-6.0.0/external/lib -L/fs/blizzard/contrib/ncl-6.0.0/external/lib
>> Extra libraries: -lsz -lz -lm
>> Archiver: ar
>> Ranlib: ranlib
>> Debugged Packages:
>> API Tracing: no
>>
>> Languages:
>> ----------
>> Fortran: no
>> C++: no
>>
>> Features:
>> ---------
>> Parallel HDF5: no
>> High Level library: yes
>> Threadsafety: no
>> Default API Mapping: v18
>> With Deprecated Public Symbols: yes
>> I/O filters (external): deflate(zlib),szip(encoder)
>> I/O filters (internal): shuffle,fletcher32,nbit,scaleoffset
>> MPE: no
>> Direct VFD: no
>> dmalloc: no
>> Clear file buffers before write: yes
>> Using memory checker: no
>> Function Stack Tracing: no
>> GPFS: no
>> Strict File Format Checks: no
>> Optimization Instrumentation: no
>> Large File Support (LFS): yes
>> H5dump Packed Bits: yes
>> Bye...
>> Aborted
>>
>>
>> Does anyone know what the problem is and/or what I can do to fix this?
>>
>> Thanks,
>>
>> Madeline
>> _______________________________________________
>> ncl-install mailing list
>> List instructions, subscriber options, unsubscribe:
>> http://mailman.ucar.edu/mailman/listinfo/ncl-install
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ucar.edu/pipermail/ncl-install/attachments/20110617/e277e038/attachment-0001.html
More information about the ncl-install
mailing list