[ncl-install] Fwd: Have anybody installed ncarg on Mac OS 10.6

Fri Nov 6 11:21:10 MST 2009

Hi Mary,

Thanks for your reply.

Sourish Basu suggested me to use the precompiled NCL. So I downloaded  
a precompiled NCL binary for the website.
There is "ncl" inside and it works.  But when I can not use WRAPIT.

Here is the information when I use WRAPIT:

guangshan% WRAPIT calculate_distance_1d.f

WRAPIT Version: 091416
COMPILING calculate_distance_1d.f
LINKING
ld: warning: in calculate_distance_1d.o, file is not of required  
architecture
END WRAPIT

I first email this problem to Macport. Nobody answers to me. Do you  
know who built this ncarg port for Macport?  I built all the external  
dependencies one by one using Macport. I think this is why I got the  
same problem as I build from source code. Unfortunately, I deleted the  
make-outfile now. I will rebuild it sometime today and send it to you  
offline.

By the way, when I tried to build the dependencies of NCL, some  
dependencies I could not build successfully. What is the pre-required  
compliers or dependencies to build the dependencies of NCL?

Guangshan

On Nov 6, 2009, at 10:21 AM, Mary Haley wrote:

> Guangshan,
>
> If you downloaded a precompiled NCL binary from the website, it  
> would definitely have "ncl" in $NCARG_ROOT/bin, or we would have  
> heard from a lot more users by now.
>
> The MacPort version is trying to build NCL from source code, so it  
> doesn't surprise me if it failed on your system. There are a lot of  
> external dependencies for NCL to be built correctly, and if any one  
> of these fail, then the build of the "ncl" executable is going to  
> fail as well. I'm not familiar with the MacPort build, so I'm not  
> sure what might have caused it to fail. However, I would double- 
> check that all the external dependencies built successfully.
>
> If you downloaded NCL source code from the ESG website and tried to  
> build it yourself, then chances are that it failed because of the  
> external dependencies as well.
>
> If you tried to build NCL from source code, then please email me the  
> "make-output" file offline. I'll take a look to see what the problem  
> is.
>
> --Mary
>
> On Nov 6, 2009, at 12:24 AM, guangshan chen wrote:
>
>> Hi all,
>>
>> I try two ways to install ncl on Mac OS 10.6.
>>
>> One is easy way using Macport. It shows there is no problem to  
>> install it. But I can not find ncl command in bin directory. I  
>> found the follows, such as WRAPIT.
>>
>> The other way is to following the NCL website to install it. I got  
>> the same.
>>
>> Have anybody met the same thing? Any suggestion?
>>
>> Thanks
>>
>> Guangshan
>>
>>
>> Begin forwarded message:
>>
>>> From: guangshan chen <gchen9 at gmail.com>
>>> Date: November 5, 2009 9:07:40 PM CST
>>> To: macports-users at lists.macosforge.org
>>> Subject: Have anybody installed ncarg on Mac OS 10.6
>>>
>>> Hi there,
>>>
>>> Today I install ncarg on my Mac OS 10.6 using Macport. It shows  
>>> that ncarg has been installed.
>>> But when I check /opt/local/bin, there is no "ncl" executable  
>>> command created.
>>>
>>> guangshan% sudo port install ncarg
>>> --->  Computing dependencies for ncarg
>>> --->  Fetching ncarg
>>> --->  Verifying checksum(s) for ncarg
>>> --->  Extracting ncarg
>>> --->  Configuring ncarg
>>> --->  Building ncarg
>>> --->  Staging ncarg into destroot
>>> --->  Installing ncarg @5.1.1_1
>>> --->  Activating ncarg @5.1.1_1
>>> --->  Cleaning ncarg
>>>
>>>
>>> The following binary file installed:
>>> -rwxr-xr-x    2 root  admin  1742552 Nov  5 21:00 nnalg*
>>> -rwxr-xr-x    2 root  admin   451112 Nov  5 21:00 rascat*
>>> -rwxr-xr-x    2 root  admin    28528 Nov  5 21:00 ncgm2cgm*
>>> -rwxr-xr-x    2 root  admin      533 Nov  5 21:00 ncarvversion*
>>> -rwxr-xr-x    2 root  admin    63272 Nov  5 21:00 med*
>>> -rwxr-xr-x    2 root  admin   712840 Nov  5 21:00 ictrans*
>>> -rwxr-xr-x    2 root  admin     1003 Nov  5 21:00 gcaps*
>>> -rwxr-xr-x    2 root  admin      851 Nov  5 21:00 fcaps*
>>> -rwxr-xr-x    2 root  admin   653888 Nov  5 21:00 ctrans*
>>> -rwxr-xr-x    2 root  admin      846 Nov  5 21:00 ctlib*
>>> -rwxr-xr-x    2 root  admin    28600 Nov  5 21:00 cgm2ncgm*
>>> -rwxr-xr-x    2 root  admin   448928 Nov  5 21:00 rasview*
>>> -rwxr-xr-x    2 root  admin   433624 Nov  5 21:00 rasstat*
>>> -rwxr-xr-x    2 root  admin   420496 Nov  5 21:00 rassplit*
>>> -rwxr-xr-x    2 root  admin   433728 Nov  5 21:00 rasls*
>>> -rwxr-xr-x    2 root  admin   429936 Nov  5 21:00 rasgetpal*
>>> -rwxr-xr-x    2 root  admin   442408 Nov  5 21:00 ras2ccir601*
>>> -rwxr-xr-x    2 root  admin    38960 Nov  5 21:00 ncgmstat*
>>> -rwxr-xr-x    2 root  admin    73048 Nov  5 21:00 idt*
>>> -rwxr-xr-x    2 root  admin    59272 Nov  5 21:00 wrapit77*
>>> -rwxr-xr-x    2 root  admin     6322 Nov  5 21:00 scrip_check_input*
>>> -rwxr-xr-x    2 root  admin     2234 Nov  5 21:00 nhlf90*
>>> -rwxr-xr-x    2 root  admin     2234 Nov  5 21:00 nhlf77*
>>> -rwxr-xr-x    2 root  admin     2438 Nov  5 21:00 nhlcc*
>>> -rwxr-xr-x    2 root  admin    30531 Nov  5 21:00 ng4ex*
>>> -rwxr-xr-x    2 root  admin     2540 Nov  5 21:00 ncl_grib2nc*
>>> -rwxr-xr-x    2 root  admin    14179 Nov  5 21:00 ncl_filedump*
>>> -rwxr-xr-x    2 root  admin    47762 Nov  5 21:00 ncl_convert2nc*
>>> -rwxr-xr-x    2 root  admin    26600 Nov  5 21:00 WRAPIT*
>>> drwxr-xr-x  803 root  admin    27302 Nov  5 21:01 ./
>>
>> _______________________________________________
>> ncl-install mailing list
>> List instructions, subscriber options, unsubscribe:
>> http://mailman.ucar.edu/mailman/listinfo/ncl-install
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ucar.edu/pipermail/ncl-install/attachments/20091106/d926694f/attachment-0001.html 