[Met_help] [rt.rap.ucar.edu #98452] History for Attention John Halley
John Halley Gotway via RT
met_help at ucar.edu
Wed Feb 10 09:21:05 MST 2021
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
I am working with Justin Tsu trying to compile MET with your patch. Met 8.1 compiles fine without the patch. After a clean compile, I did a make distclean. Then cp /users/ramos/interp_util.cc ./src/basic/vx_util/interp_util.cc
And ran ./configure again. It won't compile with the patch.
Greg Ramos
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: Attention John Halley
From: John Halley Gotway
Time: Fri Jan 29 15:34:15 2021
Greg,
Sorry to hear that. Since Justin told me he was using MET version 8.1,
I
made changes to the version of file interp_util.cc which lives in the
main_v8.1 branch in the MET repository.
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/basic/vx_util/interp_util.cc
That *should* be the same version of the file that exists on your
system.
But I suppose it is possible that it is not.
Do you still have the version of that file that does compile? If you
send
me that file, I could apply the same set of changes that Justin wants
to
that file and send it back to you.
John
On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor, Code
7501.1
via RT <met_help at ucar.edu> wrote:
>
> Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> Queue: met_help
> Subject: Attention John Halley
> Owner: Nobody
> Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
>
> I am working with Justin Tsu trying to compile MET with your patch.
Met
> 8.1 compiles fine without the patch. After a clean compile, I did a
make
> distclean. Then cp /users/ramos/interp_util.cc
> ./src/basic/vx_util/interp_util.cc
>
>
>
> And ran ./configure again. It won't compile with the patch.
>
>
>
> Greg Ramos
>
>
>
------------------------------------------------
Subject: Attention John Halley
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Time: Fri Jan 29 15:48:59 2021
I am now trying met-8.1.2. Attached is the file found in the
distribution.
Greg
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Friday, January 29, 2021 2:34 PM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
Greg,
Sorry to hear that. Since Justin told me he was using MET version 8.1,
I made changes to the version of file interp_util.cc which lives in
the
main_v8.1 branch in the MET repository.
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/basic/vx_util/interp_util.cc
That *should* be the same version of the file that exists on your
system.
But I suppose it is possible that it is not.
Do you still have the version of that file that does compile? If you
send me that file, I could apply the same set of changes that Justin
wants to that file and send it back to you.
John
On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> Queue: met_help
> Subject: Attention John Halley
> Owner: Nobody
> Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> >
>
>
> I am working with Justin Tsu trying to compile MET with your patch.
> Met
> 8.1 compiles fine without the patch. After a clean compile, I did a
> make distclean. Then cp /users/ramos/interp_util.cc
> ./src/basic/vx_util/interp_util.cc
>
>
>
> And ran ./configure again. It won't compile with the patch.
>
>
>
> Greg Ramos
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Time: Fri Jan 29 15:59:26 2021
I am trying 8.1.2 now. The compile seems to be going further.
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Friday, January 29, 2021 2:34 PM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
Greg,
Sorry to hear that. Since Justin told me he was using MET version 8.1,
I made changes to the version of file interp_util.cc which lives in
the
main_v8.1 branch in the MET repository.
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/basic/vx_util/interp_util.cc
That *should* be the same version of the file that exists on your
system.
But I suppose it is possible that it is not.
Do you still have the version of that file that does compile? If you
send me that file, I could apply the same set of changes that Justin
wants to that file and send it back to you.
John
On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> Queue: met_help
> Subject: Attention John Halley
> Owner: Nobody
> Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> >
>
>
> I am working with Justin Tsu trying to compile MET with your patch.
> Met
> 8.1 compiles fine without the patch. After a clean compile, I did a
> make distclean. Then cp /users/ramos/interp_util.cc
> ./src/basic/vx_util/interp_util.cc
>
>
>
> And ran ./configure again. It won't compile with the patch.
>
>
>
> Greg Ramos
>
>
>
------------------------------------------------
Subject: Attention John Halley
From: John Halley Gotway
Time: Fri Jan 29 16:17:47 2021
OK, thanks for the update. Please let me know if you get stuck.
Thanks,
John
On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor, Code
7501.1
via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> I am trying 8.1.2 now. The compile seems to be going further.
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Friday, January 29, 2021 2:34 PM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> Greg,
>
> Sorry to hear that. Since Justin told me he was using MET version
8.1, I
> made changes to the version of file interp_util.cc which lives in
the
> main_v8.1 branch in the MET repository.
>
>
>
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/basic/vx_util/interp_util.cc
>
> That *should* be the same version of the file that exists on your
system.
> But I suppose it is possible that it is not.
>
> Do you still have the version of that file that does compile? If you
send
> me that file, I could apply the same set of changes that Justin
wants to
> that file and send it back to you.
>
> John
>
> On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > Queue: met_help
> > Subject: Attention John Halley
> > Owner: Nobody
> > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > Status: new
> > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > >
> >
> >
> > I am working with Justin Tsu trying to compile MET with your
patch.
> > Met
> > 8.1 compiles fine without the patch. After a clean compile, I did
a
> > make distclean. Then cp /users/ramos/interp_util.cc
> > ./src/basic/vx_util/interp_util.cc
> >
> >
> >
> > And ran ./configure again. It won't compile with the patch.
> >
> >
> >
> > Greg Ramos
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Time: Fri Jan 29 17:27:45 2021
Which executable actually gets changed with the patch?
Greg
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Friday, January 29, 2021 3:18 PM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
OK, thanks for the update. Please let me know if you get stuck.
Thanks,
John
On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> I am trying 8.1.2 now. The compile seems to be going further.
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Friday, January 29, 2021 2:34 PM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> Greg,
>
> Sorry to hear that. Since Justin told me he was using MET version
8.1,
> I made changes to the version of file interp_util.cc which lives in
> the
> main_v8.1 branch in the MET repository.
>
>
>
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/basic
> /vx_util/interp_util.cc
>
> That *should* be the same version of the file that exists on your
system.
> But I suppose it is possible that it is not.
>
> Do you still have the version of that file that does compile? If you
> send me that file, I could apply the same set of changes that Justin
> wants to that file and send it back to you.
>
> John
>
> On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > Queue: met_help
> > Subject: Attention John Halley
> > Owner: Nobody
> > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > Status: new
> > Ticket <URL:
> > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > >
> >
> >
> > I am working with Justin Tsu trying to compile MET with your
patch.
> > Met
> > 8.1 compiles fine without the patch. After a clean compile, I did
a
> > make distclean. Then cp /users/ramos/interp_util.cc
> > ./src/basic/vx_util/interp_util.cc
> >
> >
> >
> > And ran ./configure again. It won't compile with the patch.
> >
> >
> >
> > Greg Ramos
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: Attention John Halley
From: John Halley Gotway
Time: Sat Jan 30 07:09:54 2021
Greg,
Its pretty deep in the library code to which most of the executables
link.
So technically they’d all be changed. But specifically Justin is
testing
the point-stat tool. He wanted to add some additional very detailed
log
messages about interpolating gridded data to point locations for
debugging
purposes.
Are you running into trouble? Would you like me to send you a fresh
tarball
that includes this change? Would that make it easier?
Thanks
John
On Fri, Jan 29, 2021 at 5:28 PM Ramos, Mr. Gregory, Contractor, Code
7501.1
via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> Which executable actually gets changed with the patch?
>
> Greg
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Friday, January 29, 2021 3:18 PM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> OK, thanks for the update. Please let me know if you get stuck.
>
> Thanks,
> John
>
> On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> >
> > I am trying 8.1.2 now. The compile seems to be going further.
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT <met_help at ucar.edu>
> > Sent: Friday, January 29, 2021 2:34 PM
> > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > Greg.Ramos.ctr at nrlmry.navy.mil>
> > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> >
> > Greg,
> >
> > Sorry to hear that. Since Justin told me he was using MET version
8.1,
> > I made changes to the version of file interp_util.cc which lives
in
> > the
> > main_v8.1 branch in the MET repository.
> >
> >
> >
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/basic
> > /vx_util/interp_util.cc
> >
> > That *should* be the same version of the file that exists on your
system.
> > But I suppose it is possible that it is not.
> >
> > Do you still have the version of that file that does compile? If
you
> > send me that file, I could apply the same set of changes that
Justin
> > wants to that file and send it back to you.
> >
> > John
> >
> > On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor,
Code
> > 7501.1 via RT <met_help at ucar.edu> wrote:
> >
> > >
> > > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > > Queue: met_help
> > > Subject: Attention John Halley
> > > Owner: Nobody
> > > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > > Status: new
> > > Ticket <URL:
> > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > > >
> > >
> > >
> > > I am working with Justin Tsu trying to compile MET with your
patch.
> > > Met
> > > 8.1 compiles fine without the patch. After a clean compile, I
did a
> > > make distclean. Then cp /users/ramos/interp_util.cc
> > > ./src/basic/vx_util/interp_util.cc
> > >
> > >
> > >
> > > And ran ./configure again. It won't compile with the patch.
> > >
> > >
> > >
> > > Greg Ramos
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Time: Sat Jan 30 10:05:22 2021
I was finally able to get a good compile. Justin has not tested it
yet.
Greg
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Saturday, January 30, 2021 6:10 AM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
Greg,
Its pretty deep in the library code to which most of the executables
link.
So technically they’d all be changed. But specifically Justin is
testing the point-stat tool. He wanted to add some additional very
detailed log messages about interpolating gridded data to point
locations for debugging purposes.
Are you running into trouble? Would you like me to send you a fresh
tarball that includes this change? Would that make it easier?
Thanks
John
On Fri, Jan 29, 2021 at 5:28 PM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> Which executable actually gets changed with the patch?
>
> Greg
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Friday, January 29, 2021 3:18 PM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> OK, thanks for the update. Please let me know if you get stuck.
>
> Thanks,
> John
>
> On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> >
> > I am trying 8.1.2 now. The compile seems to be going further.
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT <met_help at ucar.edu>
> > Sent: Friday, January 29, 2021 2:34 PM
> > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > Greg.Ramos.ctr at nrlmry.navy.mil>
> > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> >
> > Greg,
> >
> > Sorry to hear that. Since Justin told me he was using MET version
> > 8.1, I made changes to the version of file interp_util.cc which
> > lives in the
> > main_v8.1 branch in the MET repository.
> >
> >
> >
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/bas
> > ic
> > /vx_util/interp_util.cc
> >
> > That *should* be the same version of the file that exists on your
system.
> > But I suppose it is possible that it is not.
> >
> > Do you still have the version of that file that does compile? If
you
> > send me that file, I could apply the same set of changes that
Justin
> > wants to that file and send it back to you.
> >
> > John
> >
> > On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor,
Code
> > 7501.1 via RT <met_help at ucar.edu> wrote:
> >
> > >
> > > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > > Queue: met_help
> > > Subject: Attention John Halley
> > > Owner: Nobody
> > > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > > Status: new
> > > Ticket <URL:
> > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > > >
> > >
> > >
> > > I am working with Justin Tsu trying to compile MET with your
patch.
> > > Met
> > > 8.1 compiles fine without the patch. After a clean compile, I
did
> > > a make distclean. Then cp /users/ramos/interp_util.cc
> > > ./src/basic/vx_util/interp_util.cc
> > >
> > >
> > >
> > > And ran ./configure again. It won't compile with the patch.
> > >
> > >
> > >
> > > Greg Ramos
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Time: Sat Jan 30 10:29:11 2021
On second thought, I'll take the tarball. Justin probably won't test
until Monday.
Greg
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Saturday, January 30, 2021 6:10 AM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
Greg,
Its pretty deep in the library code to which most of the executables
link.
So technically they’d all be changed. But specifically Justin is
testing the point-stat tool. He wanted to add some additional very
detailed log messages about interpolating gridded data to point
locations for debugging purposes.
Are you running into trouble? Would you like me to send you a fresh
tarball that includes this change? Would that make it easier?
Thanks
John
On Fri, Jan 29, 2021 at 5:28 PM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> Which executable actually gets changed with the patch?
>
> Greg
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Friday, January 29, 2021 3:18 PM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> OK, thanks for the update. Please let me know if you get stuck.
>
> Thanks,
> John
>
> On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> >
> > I am trying 8.1.2 now. The compile seems to be going further.
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT <met_help at ucar.edu>
> > Sent: Friday, January 29, 2021 2:34 PM
> > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > Greg.Ramos.ctr at nrlmry.navy.mil>
> > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> >
> > Greg,
> >
> > Sorry to hear that. Since Justin told me he was using MET version
> > 8.1, I made changes to the version of file interp_util.cc which
> > lives in the
> > main_v8.1 branch in the MET repository.
> >
> >
> >
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/bas
> > ic
> > /vx_util/interp_util.cc
> >
> > That *should* be the same version of the file that exists on your
system.
> > But I suppose it is possible that it is not.
> >
> > Do you still have the version of that file that does compile? If
you
> > send me that file, I could apply the same set of changes that
Justin
> > wants to that file and send it back to you.
> >
> > John
> >
> > On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor,
Code
> > 7501.1 via RT <met_help at ucar.edu> wrote:
> >
> > >
> > > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > > Queue: met_help
> > > Subject: Attention John Halley
> > > Owner: Nobody
> > > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > > Status: new
> > > Ticket <URL:
> > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > > >
> > >
> > >
> > > I am working with Justin Tsu trying to compile MET with your
patch.
> > > Met
> > > 8.1 compiles fine without the patch. After a clean compile, I
did
> > > a make distclean. Then cp /users/ramos/interp_util.cc
> > > ./src/basic/vx_util/interp_util.cc
> > >
> > >
> > >
> > > And ran ./configure again. It won't compile with the patch.
> > >
> > >
> > >
> > > Greg Ramos
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: Attention John Halley
From: John Halley Gotway
Time: Sat Jan 30 13:16:04 2021
Greg,
OK, I just created a tarfile for the current contents of the
main_v8.1_interp_bilin branch on GitHub:
https://github.com/dtcenter/MET/tree/main_v8.1_interp_bilin/met
I posted the tarfile to our anonymous ftp site:
http://ftp.rap.ucar.edu/incoming/irap/met_help/ramos_data/met-
main_8.1_interp_bilin.20210130.tar.gz
I did also test to confirm that this compiles fine on a local machine
using
the commands listed below. Just for reference, I also listed out the
environment variables I have set which impact this compilation.
MET_GSL=/d1/projects/MET/MET_releases/external_libs/gnu_6.3.0
MET_GRIB2C=/usr/local
MET_BUFR=/usr/local
MET_HDF5=/usr/local/hdf5-1.8.20
MET_NETCDF=/usr/local/netcdf-4.7.0/gcc-6.3.0
MET_HDFINC=/usr/local/hdf4-4.2.13/include/hdf
MET_HDFLIB=/usr/local/hdf4-4.2.13/lib
MET_HDFEOS=/usr/local/hdf-eos2-19v1
MET_CAIROINC=/usr/include/cairo
MET_CAIROLIB=/usr/lib
MET_FREETYPEINC=/usr/include/freetype2
MET_FREETYPELIB=/usr/lib
MET_PYTHON_CC=-I/usr/include/python2.7
-I/usr/include/x86_64-linux-gnu/python2.7
MET_PYTHON_LD=-L/usr/lib/python2.7/config-x86_64-linux-gnu -L/usr/lib
-lpython2.7 -lpthread -ldl -lutil
MET_FONT_DIR=/d1/projects/MET/MET_test_data/unit_test/fonts
*tar -xvzf met-main_8.1_interp_bilin.20210130.tar.gz*
*cd met-main_8.1_interp_bilin*
*./configure --prefix=`pwd` --enable-grib2 --enable-python --enable-
modis
--enable-mode_graphics --enable-lidar2nc*
*make install test >& make.log*
And testing the point_stat tool using the bilinear method, I was able
to
confirm the new log messages that Justin is looking for:
DEBUG 4: interp_bilin() -> obs(x,y) = (364.72994,189.04275)
DEBUG 4: SW (364,189) wgt, val = 0.258515, -2.93019
DEBUG 4: SE (365,189) wgt, val = 0.698735, -2.92614
DEBUG 4: NW (364,190) wgt, val = 0.011545, -2.93012
DEBUG 4: NE (365,190) wgt, val = 0.0312047, -2.92606
DEBUG 4: bilin_v = -2.92723
Thanks,
John
On Sat, Jan 30, 2021 at 10:29 AM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> On second thought, I'll take the tarball. Justin probably won't test
until
> Monday.
>
> Greg
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Saturday, January 30, 2021 6:10 AM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> Greg,
>
> Its pretty deep in the library code to which most of the executables
link.
> So technically they’d all be changed. But specifically Justin is
testing
> the point-stat tool. He wanted to add some additional very detailed
log
> messages about interpolating gridded data to point locations for
debugging
> purposes.
>
> Are you running into trouble? Would you like me to send you a fresh
> tarball that includes this change? Would that make it easier?
>
> Thanks
> John
>
> On Fri, Jan 29, 2021 at 5:28 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> >
> > Which executable actually gets changed with the patch?
> >
> > Greg
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT <met_help at ucar.edu>
> > Sent: Friday, January 29, 2021 3:18 PM
> > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > Greg.Ramos.ctr at nrlmry.navy.mil>
> > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> >
> > OK, thanks for the update. Please let me know if you get stuck.
> >
> > Thanks,
> > John
> >
> > On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor,
Code
> > 7501.1 via RT <met_help at ucar.edu> wrote:
> >
> > >
> > > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> > >
> > > I am trying 8.1.2 now. The compile seems to be going further.
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT <met_help at ucar.edu>
> > > Sent: Friday, January 29, 2021 2:34 PM
> > > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > > Greg.Ramos.ctr at nrlmry.navy.mil>
> > > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> > >
> > > Greg,
> > >
> > > Sorry to hear that. Since Justin told me he was using MET
version
> > > 8.1, I made changes to the version of file interp_util.cc which
> > > lives in the
> > > main_v8.1 branch in the MET repository.
> > >
> > >
> > >
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/bas
> > > ic
> > > /vx_util/interp_util.cc
> > >
> > > That *should* be the same version of the file that exists on
your
> system.
> > > But I suppose it is possible that it is not.
> > >
> > > Do you still have the version of that file that does compile? If
you
> > > send me that file, I could apply the same set of changes that
Justin
> > > wants to that file and send it back to you.
> > >
> > > John
> > >
> > > On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor,
Code
> > > 7501.1 via RT <met_help at ucar.edu> wrote:
> > >
> > > >
> > > > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > > > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Queue: met_help
> > > > Subject: Attention John Halley
> > > > Owner: Nobody
> > > > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Status: new
> > > > Ticket <URL:
> > > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > > > >
> > > >
> > > >
> > > > I am working with Justin Tsu trying to compile MET with your
patch.
> > > > Met
> > > > 8.1 compiles fine without the patch. After a clean compile, I
did
> > > > a make distclean. Then cp /users/ramos/interp_util.cc
> > > > ./src/basic/vx_util/interp_util.cc
> > > >
> > > >
> > > >
> > > > And ran ./configure again. It won't compile with the patch.
> > > >
> > > >
> > > >
> > > > Greg Ramos
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Time: Sat Jan 30 13:48:04 2021
OK, I was aable to grab it. Thanks. I will work on it later.
Greg
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Saturday, January 30, 2021 12:16 PM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
Greg,
OK, I just created a tarfile for the current contents of the
main_v8.1_interp_bilin branch on GitHub:
https://github.com/dtcenter/MET/tree/main_v8.1_interp_bilin/met
I posted the tarfile to our anonymous ftp site:
http://ftp.rap.ucar.edu/incoming/irap/met_help/ramos_data/met-
main_8.1_interp_bilin.20210130.tar.gz
I did also test to confirm that this compiles fine on a local machine
using the commands listed below. Just for reference, I also listed out
the environment variables I have set which impact this compilation.
MET_GSL=/d1/projects/MET/MET_releases/external_libs/gnu_6.3.0
MET_GRIB2C=/usr/local
MET_BUFR=/usr/local
MET_HDF5=/usr/local/hdf5-1.8.20
MET_NETCDF=/usr/local/netcdf-4.7.0/gcc-6.3.0
MET_HDFINC=/usr/local/hdf4-4.2.13/include/hdf
MET_HDFLIB=/usr/local/hdf4-4.2.13/lib
MET_HDFEOS=/usr/local/hdf-eos2-19v1
MET_CAIROINC=/usr/include/cairo
MET_CAIROLIB=/usr/lib
MET_FREETYPEINC=/usr/include/freetype2
MET_FREETYPELIB=/usr/lib
MET_PYTHON_CC=-I/usr/include/python2.7
-I/usr/include/x86_64-linux-gnu/python2.7
MET_PYTHON_LD=-L/usr/lib/python2.7/config-x86_64-linux-gnu -L/usr/lib
-lpython2.7 -lpthread -ldl -lutil
MET_FONT_DIR=/d1/projects/MET/MET_test_data/unit_test/fonts
*tar -xvzf met-main_8.1_interp_bilin.20210130.tar.gz*
*cd met-main_8.1_interp_bilin*
*./configure --prefix=`pwd` --enable-grib2 --enable-python --enable-
modis --enable-mode_graphics --enable-lidar2nc* *make install test >&
make.log*
And testing the point_stat tool using the bilinear method, I was able
to confirm the new log messages that Justin is looking for:
DEBUG 4: interp_bilin() -> obs(x,y) = (364.72994,189.04275) DEBUG 4:
SW (364,189) wgt, val = 0.258515, -2.93019 DEBUG 4: SE (365,189) wgt,
val = 0.698735, -2.92614 DEBUG 4: NW (364,190) wgt, val = 0.011545,
-2.93012 DEBUG 4: NE (365,190) wgt, val = 0.0312047, -2.92606 DEBUG 4:
bilin_v = -2.92723
Thanks,
John
On Sat, Jan 30, 2021 at 10:29 AM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> On second thought, I'll take the tarball. Justin probably won't test
> until Monday.
>
> Greg
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Saturday, January 30, 2021 6:10 AM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> Greg,
>
> Its pretty deep in the library code to which most of the executables
link.
> So technically they’d all be changed. But specifically Justin is
> testing the point-stat tool. He wanted to add some additional very
> detailed log messages about interpolating gridded data to point
> locations for debugging purposes.
>
> Are you running into trouble? Would you like me to send you a fresh
> tarball that includes this change? Would that make it easier?
>
> Thanks
> John
>
> On Fri, Jan 29, 2021 at 5:28 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> >
> > Which executable actually gets changed with the patch?
> >
> > Greg
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT <met_help at ucar.edu>
> > Sent: Friday, January 29, 2021 3:18 PM
> > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > Greg.Ramos.ctr at nrlmry.navy.mil>
> > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> >
> > OK, thanks for the update. Please let me know if you get stuck.
> >
> > Thanks,
> > John
> >
> > On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor,
Code
> > 7501.1 via RT <met_help at ucar.edu> wrote:
> >
> > >
> > > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> > >
> > > I am trying 8.1.2 now. The compile seems to be going further.
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT <met_help at ucar.edu>
> > > Sent: Friday, January 29, 2021 2:34 PM
> > > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > > Greg.Ramos.ctr at nrlmry.navy.mil>
> > > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> > >
> > > Greg,
> > >
> > > Sorry to hear that. Since Justin told me he was using MET
version
> > > 8.1, I made changes to the version of file interp_util.cc which
> > > lives in the
> > > main_v8.1 branch in the MET repository.
> > >
> > >
> > >
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/b
> > > as
> > > ic
> > > /vx_util/interp_util.cc
> > >
> > > That *should* be the same version of the file that exists on
your
> system.
> > > But I suppose it is possible that it is not.
> > >
> > > Do you still have the version of that file that does compile? If
> > > you send me that file, I could apply the same set of changes
that
> > > Justin wants to that file and send it back to you.
> > >
> > > John
> > >
> > > On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor,
> > > Code
> > > 7501.1 via RT <met_help at ucar.edu> wrote:
> > >
> > > >
> > > > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > > > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Queue: met_help
> > > > Subject: Attention John Halley
> > > > Owner: Nobody
> > > > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Status: new
> > > > Ticket <URL:
> > > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > > > >
> > > >
> > > >
> > > > I am working with Justin Tsu trying to compile MET with your
patch.
> > > > Met
> > > > 8.1 compiles fine without the patch. After a clean compile, I
> > > > did a make distclean. Then cp /users/ramos/interp_util.cc
> > > > ./src/basic/vx_util/interp_util.cc
> > > >
> > > >
> > > >
> > > > And ran ./configure again. It won't compile with the patch.
> > > >
> > > >
> > > >
> > > > Greg Ramos
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
From: Tsu, Mr. Justin
Time: Mon Feb 01 14:52:21 2021
Greg, where are the executables?
Are they in /software/depot/met-8.1a-patched/met-
main_8.1_interp_bilin?
If so, I do not have permissions. I need to know where the
executables are so I can point my MET_BASE env variable to it
Justin
-----Original Message-----
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Sent: Saturday, January 30, 2021 12:48 PM
To: met_help at ucar.edu
Cc: Tsu, Mr. Justin
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
OK, I was aable to grab it. Thanks. I will work on it later.
Greg
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Saturday, January 30, 2021 12:16 PM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
Greg,
OK, I just created a tarfile for the current contents of the
main_v8.1_interp_bilin branch on GitHub:
https://github.com/dtcenter/MET/tree/main_v8.1_interp_bilin/met
I posted the tarfile to our anonymous ftp site:
http://ftp.rap.ucar.edu/incoming/irap/met_help/ramos_data/met-
main_8.1_interp_bilin.20210130.tar.gz
I did also test to confirm that this compiles fine on a local machine
using the commands listed below. Just for reference, I also listed out
the environment variables I have set which impact this compilation.
MET_GSL=/d1/projects/MET/MET_releases/external_libs/gnu_6.3.0
MET_GRIB2C=/usr/local
MET_BUFR=/usr/local
MET_HDF5=/usr/local/hdf5-1.8.20
MET_NETCDF=/usr/local/netcdf-4.7.0/gcc-6.3.0
MET_HDFINC=/usr/local/hdf4-4.2.13/include/hdf
MET_HDFLIB=/usr/local/hdf4-4.2.13/lib
MET_HDFEOS=/usr/local/hdf-eos2-19v1
MET_CAIROINC=/usr/include/cairo
MET_CAIROLIB=/usr/lib
MET_FREETYPEINC=/usr/include/freetype2
MET_FREETYPELIB=/usr/lib
MET_PYTHON_CC=-I/usr/include/python2.7
-I/usr/include/x86_64-linux-gnu/python2.7
MET_PYTHON_LD=-L/usr/lib/python2.7/config-x86_64-linux-gnu -L/usr/lib
-lpython2.7 -lpthread -ldl -lutil
MET_FONT_DIR=/d1/projects/MET/MET_test_data/unit_test/fonts
*tar -xvzf met-main_8.1_interp_bilin.20210130.tar.gz*
*cd met-main_8.1_interp_bilin*
*./configure --prefix=`pwd` --enable-grib2 --enable-python --enable-
modis --enable-mode_graphics --enable-lidar2nc* *make install test >&
make.log*
And testing the point_stat tool using the bilinear method, I was able
to confirm the new log messages that Justin is looking for:
DEBUG 4: interp_bilin() -> obs(x,y) = (364.72994,189.04275) DEBUG 4:
SW (364,189) wgt, val = 0.258515, -2.93019 DEBUG 4: SE (365,189) wgt,
val = 0.698735, -2.92614 DEBUG 4: NW (364,190) wgt, val = 0.011545,
-2.93012 DEBUG 4: NE (365,190) wgt, val = 0.0312047, -2.92606 DEBUG 4:
bilin_v = -2.92723
Thanks,
John
On Sat, Jan 30, 2021 at 10:29 AM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> On second thought, I'll take the tarball. Justin probably won't test
> until Monday.
>
> Greg
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Saturday, January 30, 2021 6:10 AM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> Greg,
>
> Its pretty deep in the library code to which most of the executables
link.
> So technically they’d all be changed. But specifically Justin is
> testing the point-stat tool. He wanted to add some additional very
> detailed log messages about interpolating gridded data to point
> locations for debugging purposes.
>
> Are you running into trouble? Would you like me to send you a fresh
> tarball that includes this change? Would that make it easier?
>
> Thanks
> John
>
> On Fri, Jan 29, 2021 at 5:28 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> >
> > Which executable actually gets changed with the patch?
> >
> > Greg
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT <met_help at ucar.edu>
> > Sent: Friday, January 29, 2021 3:18 PM
> > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > Greg.Ramos.ctr at nrlmry.navy.mil>
> > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> >
> > OK, thanks for the update. Please let me know if you get stuck.
> >
> > Thanks,
> > John
> >
> > On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor,
Code
> > 7501.1 via RT <met_help at ucar.edu> wrote:
> >
> > >
> > > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> > >
> > > I am trying 8.1.2 now. The compile seems to be going further.
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT <met_help at ucar.edu>
> > > Sent: Friday, January 29, 2021 2:34 PM
> > > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > > Greg.Ramos.ctr at nrlmry.navy.mil>
> > > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> > >
> > > Greg,
> > >
> > > Sorry to hear that. Since Justin told me he was using MET
version
> > > 8.1, I made changes to the version of file interp_util.cc which
> > > lives in the
> > > main_v8.1 branch in the MET repository.
> > >
> > >
> > >
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/b
> > > as
> > > ic
> > > /vx_util/interp_util.cc
> > >
> > > That *should* be the same version of the file that exists on
your
> system.
> > > But I suppose it is possible that it is not.
> > >
> > > Do you still have the version of that file that does compile? If
> > > you send me that file, I could apply the same set of changes
that
> > > Justin wants to that file and send it back to you.
> > >
> > > John
> > >
> > > On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor,
> > > Code
> > > 7501.1 via RT <met_help at ucar.edu> wrote:
> > >
> > > >
> > > > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > > > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Queue: met_help
> > > > Subject: Attention John Halley
> > > > Owner: Nobody
> > > > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Status: new
> > > > Ticket <URL:
> > > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > > > >
> > > >
> > > >
> > > > I am working with Justin Tsu trying to compile MET with your
patch.
> > > > Met
> > > > 8.1 compiles fine without the patch. After a clean compile, I
> > > > did a make distclean. Then cp /users/ramos/interp_util.cc
> > > > ./src/basic/vx_util/interp_util.cc
> > > >
> > > >
> > > >
> > > > And ran ./configure again. It won't compile with the patch.
> > > >
> > > >
> > > >
> > > > Greg Ramos
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Time: Mon Feb 01 15:15:07 2021
OK, hold on. I did create a new module.
Greg
-----Original Message-----
From: Tsu, Mr. Justin via RT <met_help at ucar.edu>
Sent: Monday, February 1, 2021 1:52 PM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
Greg, where are the executables?
Are they in /software/depot/met-8.1a-patched/met-
main_8.1_interp_bilin?
If so, I do not have permissions. I need to know where the
executables are so I can point my MET_BASE env variable to it
Justin
-----Original Message-----
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Sent: Saturday, January 30, 2021 12:48 PM
To: met_help at ucar.edu
Cc: Tsu, Mr. Justin
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
OK, I was aable to grab it. Thanks. I will work on it later.
Greg
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Saturday, January 30, 2021 12:16 PM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
Greg,
OK, I just created a tarfile for the current contents of the
main_v8.1_interp_bilin branch on GitHub:
https://github.com/dtcenter/MET/tree/main_v8.1_interp_bilin/met
I posted the tarfile to our anonymous ftp site:
http://ftp.rap.ucar.edu/incoming/irap/met_help/ramos_data/met-
main_8.1_interp_bilin.20210130.tar.gz
I did also test to confirm that this compiles fine on a local machine
using the commands listed below. Just for reference, I also listed out
the environment variables I have set which impact this compilation.
MET_GSL=/d1/projects/MET/MET_releases/external_libs/gnu_6.3.0
MET_GRIB2C=/usr/local
MET_BUFR=/usr/local
MET_HDF5=/usr/local/hdf5-1.8.20
MET_NETCDF=/usr/local/netcdf-4.7.0/gcc-6.3.0
MET_HDFINC=/usr/local/hdf4-4.2.13/include/hdf
MET_HDFLIB=/usr/local/hdf4-4.2.13/lib
MET_HDFEOS=/usr/local/hdf-eos2-19v1
MET_CAIROINC=/usr/include/cairo
MET_CAIROLIB=/usr/lib
MET_FREETYPEINC=/usr/include/freetype2
MET_FREETYPELIB=/usr/lib
MET_PYTHON_CC=-I/usr/include/python2.7
-I/usr/include/x86_64-linux-gnu/python2.7
MET_PYTHON_LD=-L/usr/lib/python2.7/config-x86_64-linux-gnu -L/usr/lib
-lpython2.7 -lpthread -ldl -lutil
MET_FONT_DIR=/d1/projects/MET/MET_test_data/unit_test/fonts
*tar -xvzf met-main_8.1_interp_bilin.20210130.tar.gz*
*cd met-main_8.1_interp_bilin*
*./configure --prefix=`pwd` --enable-grib2 --enable-python --enable-
modis --enable-mode_graphics --enable-lidar2nc* *make install test >&
make.log*
And testing the point_stat tool using the bilinear method, I was able
to confirm the new log messages that Justin is looking for:
DEBUG 4: interp_bilin() -> obs(x,y) = (364.72994,189.04275) DEBUG 4:
SW (364,189) wgt, val = 0.258515, -2.93019 DEBUG 4: SE (365,189) wgt,
val = 0.698735, -2.92614 DEBUG 4: NW (364,190) wgt, val = 0.011545,
-2.93012 DEBUG 4: NE (365,190) wgt, val = 0.0312047, -2.92606 DEBUG 4:
bilin_v = -2.92723
Thanks,
John
On Sat, Jan 30, 2021 at 10:29 AM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> On second thought, I'll take the tarball. Justin probably won't test
> until Monday.
>
> Greg
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Saturday, January 30, 2021 6:10 AM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> Greg,
>
> Its pretty deep in the library code to which most of the executables
link.
> So technically they’d all be changed. But specifically Justin is
> testing the point-stat tool. He wanted to add some additional very
> detailed log messages about interpolating gridded data to point
> locations for debugging purposes.
>
> Are you running into trouble? Would you like me to send you a fresh
> tarball that includes this change? Would that make it easier?
>
> Thanks
> John
>
> On Fri, Jan 29, 2021 at 5:28 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> >
> > Which executable actually gets changed with the patch?
> >
> > Greg
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT <met_help at ucar.edu>
> > Sent: Friday, January 29, 2021 3:18 PM
> > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > Greg.Ramos.ctr at nrlmry.navy.mil>
> > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> >
> > OK, thanks for the update. Please let me know if you get stuck.
> >
> > Thanks,
> > John
> >
> > On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor,
Code
> > 7501.1 via RT <met_help at ucar.edu> wrote:
> >
> > >
> > > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> > >
> > > I am trying 8.1.2 now. The compile seems to be going further.
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT <met_help at ucar.edu>
> > > Sent: Friday, January 29, 2021 2:34 PM
> > > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > > Greg.Ramos.ctr at nrlmry.navy.mil>
> > > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> > >
> > > Greg,
> > >
> > > Sorry to hear that. Since Justin told me he was using MET
version
> > > 8.1, I made changes to the version of file interp_util.cc which
> > > lives in the
> > > main_v8.1 branch in the MET repository.
> > >
> > >
> > >
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/b
> > > as
> > > ic
> > > /vx_util/interp_util.cc
> > >
> > > That *should* be the same version of the file that exists on
your
> system.
> > > But I suppose it is possible that it is not.
> > >
> > > Do you still have the version of that file that does compile? If
> > > you send me that file, I could apply the same set of changes
that
> > > Justin wants to that file and send it back to you.
> > >
> > > John
> > >
> > > On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor,
> > > Code
> > > 7501.1 via RT <met_help at ucar.edu> wrote:
> > >
> > > >
> > > > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > > > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Queue: met_help
> > > > Subject: Attention John Halley
> > > > Owner: Nobody
> > > > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Status: new
> > > > Ticket <URL:
> > > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > > > >
> > > >
> > > >
> > > > I am working with Justin Tsu trying to compile MET with your
patch.
> > > > Met
> > > > 8.1 compiles fine without the patch. After a clean compile, I
> > > > did a make distclean. Then cp /users/ramos/interp_util.cc
> > > > ./src/basic/vx_util/interp_util.cc
> > > >
> > > >
> > > >
> > > > And ran ./configure again. It won't compile with the patch.
> > > >
> > > >
> > > >
> > > > Greg Ramos
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Time: Mon Feb 01 15:18:14 2021
[ramos at lorenz ~]$ ls -larth /software/depot/met-8.1a/met-8.1a/bin
total 395M
-rwxr-xr-x. 1 ramos ramos 19M May 25 2019 ensemble_stat
-rwxr-xr-x. 1 ramos ramos 19M May 25 2019 grid_stat
-rwxr-xr-x. 1 ramos ramos 20M May 25 2019 mode
-rwxr-xr-x. 1 ramos ramos 9.2M May 25 2019 mode_analysis
-rwxr-xr-x. 1 ramos ramos 13M May 25 2019 pcp_combine
-rwxr-xr-x. 1 ramos ramos 18M May 25 2019 point_stat
-rwxr-xr-x. 1 ramos ramos 21M May 25 2019 stat_analysis
-rwxr-xr-x. 1 ramos ramos 19M May 25 2019 wavelet_stat
-rwxr-xr-x. 1 ramos ramos 16M May 25 2019 series_analysis
-rwxr-xr-x. 1 ramos ramos 1.3M May 25 2019 gis_dump_shp
-rwxr-xr-x. 1 ramos ramos 1.1M May 25 2019 gis_dump_shx
-rwxr-xr-x. 1 ramos ramos 1023K May 25 2019 gis_dump_dbf
-rwxr-xr-x. 1 ramos ramos 14M May 25 2019 gen_vx_mask
-rwxr-xr-x. 1 ramos ramos 14M May 25 2019 plot_data_plane
-rwxr-xr-x. 1 ramos ramos 13M May 25 2019 plot_point_obs
-rwxr-xr-x. 1 ramos ramos 16M May 25 2019 ascii2nc
-rwxr-xr-x. 1 ramos ramos 3.7M May 25 2019 lidar2nc
-rwxr-xr-x. 1 ramos ramos 15M May 25 2019 madis2nc
-rwxr-xr-x. 1 ramos ramos 16M May 25 2019 pb2nc
-rwxr-xr-x. 1 ramos ramos 14M May 25 2019 wwmca_regrid
-rwxr-xr-x. 1 ramos ramos 15M May 25 2019 wwmca_plot
-rwxr-xr-x. 1 ramos ramos 14M May 25 2019 modis_regrid
-rwxr-xr-x. 1 ramos ramos 7.1M May 25 2019 plot_mode_field
-rwxr-xr-x. 1 ramos ramos 16M May 25 2019 mtd
-rwxr-xr-x. 1 ramos ramos 11M May 25 2019 gsid2mpr
-rwxr-xr-x. 1 ramos ramos 11M May 25 2019 gsidens2orank
-rwxr-xr-x. 1 ramos ramos 14M May 25 2019 regrid_data_plane
-rwxr-xr-x. 1 ramos ramos 13M May 25 2019 shift_data_plane
-rwxr-xr-x. 1 ramos ramos 6.0M May 25 2019 tc_dland
-rwxr-xr-x. 1 ramos ramos 16M May 25 2019 tc_pairs
drwxr-xr-x. 2 ramos ramos 4.0K May 25 2019 .
-rwxr-xr-x. 1 ramos ramos 19M May 25 2019 tc_stat
drwxr-xr-x. 9 ramos ramos 4.0K May 25 2019 ..
[ramos at lorenz ~]$ which grid_stat
/software/depot/met-8.1a/met-8.1a/bin/grid_stat
[ramos at lorenz ~]$ module list
Currently Loaded Modulefiles:
1) met-8.1/met-8.1a-with-grib2-support
[ramos at lorenz ~]$
-----Original Message-----
From: Tsu, Mr. Justin via RT <met_help at ucar.edu>
Sent: Monday, February 1, 2021 1:52 PM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
Greg, where are the executables?
Are they in /software/depot/met-8.1a-patched/met-
main_8.1_interp_bilin?
If so, I do not have permissions. I need to know where the
executables are so I can point my MET_BASE env variable to it
Justin
-----Original Message-----
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Sent: Saturday, January 30, 2021 12:48 PM
To: met_help at ucar.edu
Cc: Tsu, Mr. Justin
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
OK, I was aable to grab it. Thanks. I will work on it later.
Greg
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Saturday, January 30, 2021 12:16 PM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
Greg,
OK, I just created a tarfile for the current contents of the
main_v8.1_interp_bilin branch on GitHub:
https://github.com/dtcenter/MET/tree/main_v8.1_interp_bilin/met
I posted the tarfile to our anonymous ftp site:
http://ftp.rap.ucar.edu/incoming/irap/met_help/ramos_data/met-
main_8.1_interp_bilin.20210130.tar.gz
I did also test to confirm that this compiles fine on a local machine
using the commands listed below. Just for reference, I also listed out
the environment variables I have set which impact this compilation.
MET_GSL=/d1/projects/MET/MET_releases/external_libs/gnu_6.3.0
MET_GRIB2C=/usr/local
MET_BUFR=/usr/local
MET_HDF5=/usr/local/hdf5-1.8.20
MET_NETCDF=/usr/local/netcdf-4.7.0/gcc-6.3.0
MET_HDFINC=/usr/local/hdf4-4.2.13/include/hdf
MET_HDFLIB=/usr/local/hdf4-4.2.13/lib
MET_HDFEOS=/usr/local/hdf-eos2-19v1
MET_CAIROINC=/usr/include/cairo
MET_CAIROLIB=/usr/lib
MET_FREETYPEINC=/usr/include/freetype2
MET_FREETYPELIB=/usr/lib
MET_PYTHON_CC=-I/usr/include/python2.7
-I/usr/include/x86_64-linux-gnu/python2.7
MET_PYTHON_LD=-L/usr/lib/python2.7/config-x86_64-linux-gnu -L/usr/lib
-lpython2.7 -lpthread -ldl -lutil
MET_FONT_DIR=/d1/projects/MET/MET_test_data/unit_test/fonts
*tar -xvzf met-main_8.1_interp_bilin.20210130.tar.gz*
*cd met-main_8.1_interp_bilin*
*./configure --prefix=`pwd` --enable-grib2 --enable-python --enable-
modis --enable-mode_graphics --enable-lidar2nc* *make install test >&
make.log*
And testing the point_stat tool using the bilinear method, I was able
to confirm the new log messages that Justin is looking for:
DEBUG 4: interp_bilin() -> obs(x,y) = (364.72994,189.04275) DEBUG 4:
SW (364,189) wgt, val = 0.258515, -2.93019 DEBUG 4: SE (365,189) wgt,
val = 0.698735, -2.92614 DEBUG 4: NW (364,190) wgt, val = 0.011545,
-2.93012 DEBUG 4: NE (365,190) wgt, val = 0.0312047, -2.92606 DEBUG 4:
bilin_v = -2.92723
Thanks,
John
On Sat, Jan 30, 2021 at 10:29 AM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> On second thought, I'll take the tarball. Justin probably won't test
> until Monday.
>
> Greg
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Saturday, January 30, 2021 6:10 AM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> Greg,
>
> Its pretty deep in the library code to which most of the executables
link.
> So technically they’d all be changed. But specifically Justin is
> testing the point-stat tool. He wanted to add some additional very
> detailed log messages about interpolating gridded data to point
> locations for debugging purposes.
>
> Are you running into trouble? Would you like me to send you a fresh
> tarball that includes this change? Would that make it easier?
>
> Thanks
> John
>
> On Fri, Jan 29, 2021 at 5:28 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> >
> > Which executable actually gets changed with the patch?
> >
> > Greg
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT <met_help at ucar.edu>
> > Sent: Friday, January 29, 2021 3:18 PM
> > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > Greg.Ramos.ctr at nrlmry.navy.mil>
> > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> >
> > OK, thanks for the update. Please let me know if you get stuck.
> >
> > Thanks,
> > John
> >
> > On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor,
Code
> > 7501.1 via RT <met_help at ucar.edu> wrote:
> >
> > >
> > > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> > >
> > > I am trying 8.1.2 now. The compile seems to be going further.
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT <met_help at ucar.edu>
> > > Sent: Friday, January 29, 2021 2:34 PM
> > > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > > Greg.Ramos.ctr at nrlmry.navy.mil>
> > > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> > >
> > > Greg,
> > >
> > > Sorry to hear that. Since Justin told me he was using MET
version
> > > 8.1, I made changes to the version of file interp_util.cc which
> > > lives in the
> > > main_v8.1 branch in the MET repository.
> > >
> > >
> > >
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/b
> > > as
> > > ic
> > > /vx_util/interp_util.cc
> > >
> > > That *should* be the same version of the file that exists on
your
> system.
> > > But I suppose it is possible that it is not.
> > >
> > > Do you still have the version of that file that does compile? If
> > > you send me that file, I could apply the same set of changes
that
> > > Justin wants to that file and send it back to you.
> > >
> > > John
> > >
> > > On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor,
> > > Code
> > > 7501.1 via RT <met_help at ucar.edu> wrote:
> > >
> > > >
> > > > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > > > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Queue: met_help
> > > > Subject: Attention John Halley
> > > > Owner: Nobody
> > > > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Status: new
> > > > Ticket <URL:
> > > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > > > >
> > > >
> > > >
> > > > I am working with Justin Tsu trying to compile MET with your
patch.
> > > > Met
> > > > 8.1 compiles fine without the patch. After a clean compile, I
> > > > did a make distclean. Then cp /users/ramos/interp_util.cc
> > > > ./src/basic/vx_util/interp_util.cc
> > > >
> > > >
> > > >
> > > > And ran ./configure again. It won't compile with the patch.
> > > >
> > > >
> > > >
> > > > Greg Ramos
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
From: Tsu, Mr. Justin
Time: Tue Feb 02 11:45:05 2021
John,
Can you shed some light onto this. From your new patch to point_stat:
104 DEBUG 4: interp_bilin() -> obs(x,y) = (65.64981,61.23906)
105 DEBUG 4: SW (65,61) wgt, val = 0.266476, 0
106 DEBUG 4: SE (66,61) wgt, val = 0.494463, 100
107 DEBUG 4: NW (65,62) wgt, val = 0.0837177, 0
108 DEBUG 4: NE (66,62) wgt, val = 0.155343, 100
This is looking at an observation located at (ii,jj) =
(65.64981,61.23906) and then printing out the weights from the four
vertices. The weights don't make sense because I was expecting them
to be 0.64981, 1-0.64981, 0.23906, and 1-0.23906. Can you tell me
how these weights are calculated because the weights I just listed are
used in the NRL verify program and I believe this to be the reason why
our interpolated forecast fields differ.
Thanks,
Justin
-----Original Message-----
From: Ramos, Mr. Gregory, Contractor, Code 7501.1
Sent: Saturday, January 30, 2021 12:48 PM
To: met_help at ucar.edu
Cc: Tsu, Mr. Justin
Subject: RE: [rt.rap.ucar.edu #98452] Attention John Halley
OK, I was aable to grab it. Thanks. I will work on it later.
Greg
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Saturday, January 30, 2021 12:16 PM
To: Ramos, Mr. Gregory, Contractor, Code 7501.1
<Greg.Ramos.ctr at nrlmry.navy.mil>
Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
Greg,
OK, I just created a tarfile for the current contents of the
main_v8.1_interp_bilin branch on GitHub:
https://github.com/dtcenter/MET/tree/main_v8.1_interp_bilin/met
I posted the tarfile to our anonymous ftp site:
http://ftp.rap.ucar.edu/incoming/irap/met_help/ramos_data/met-
main_8.1_interp_bilin.20210130.tar.gz
I did also test to confirm that this compiles fine on a local machine
using the commands listed below. Just for reference, I also listed out
the environment variables I have set which impact this compilation.
MET_GSL=/d1/projects/MET/MET_releases/external_libs/gnu_6.3.0
MET_GRIB2C=/usr/local
MET_BUFR=/usr/local
MET_HDF5=/usr/local/hdf5-1.8.20
MET_NETCDF=/usr/local/netcdf-4.7.0/gcc-6.3.0
MET_HDFINC=/usr/local/hdf4-4.2.13/include/hdf
MET_HDFLIB=/usr/local/hdf4-4.2.13/lib
MET_HDFEOS=/usr/local/hdf-eos2-19v1
MET_CAIROINC=/usr/include/cairo
MET_CAIROLIB=/usr/lib
MET_FREETYPEINC=/usr/include/freetype2
MET_FREETYPELIB=/usr/lib
MET_PYTHON_CC=-I/usr/include/python2.7
-I/usr/include/x86_64-linux-gnu/python2.7
MET_PYTHON_LD=-L/usr/lib/python2.7/config-x86_64-linux-gnu -L/usr/lib
-lpython2.7 -lpthread -ldl -lutil
MET_FONT_DIR=/d1/projects/MET/MET_test_data/unit_test/fonts
*tar -xvzf met-main_8.1_interp_bilin.20210130.tar.gz*
*cd met-main_8.1_interp_bilin*
*./configure --prefix=`pwd` --enable-grib2 --enable-python --enable-
modis --enable-mode_graphics --enable-lidar2nc* *make install test >&
make.log*
And testing the point_stat tool using the bilinear method, I was able
to confirm the new log messages that Justin is looking for:
DEBUG 4: interp_bilin() -> obs(x,y) = (364.72994,189.04275) DEBUG 4:
SW (364,189) wgt, val = 0.258515, -2.93019 DEBUG 4: SE (365,189) wgt,
val = 0.698735, -2.92614 DEBUG 4: NW (364,190) wgt, val = 0.011545,
-2.93012 DEBUG 4: NE (365,190) wgt, val = 0.0312047, -2.92606 DEBUG 4:
bilin_v = -2.92723
Thanks,
John
On Sat, Jan 30, 2021 at 10:29 AM Ramos, Mr. Gregory, Contractor, Code
7501.1 via RT <met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
>
> On second thought, I'll take the tarball. Justin probably won't test
> until Monday.
>
> Greg
>
> -----Original Message-----
> From: John Halley Gotway via RT <met_help at ucar.edu>
> Sent: Saturday, January 30, 2021 6:10 AM
> To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> Greg.Ramos.ctr at nrlmry.navy.mil>
> Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
>
> Greg,
>
> Its pretty deep in the library code to which most of the executables
link.
> So technically they’d all be changed. But specifically Justin is
> testing the point-stat tool. He wanted to add some additional very
> detailed log messages about interpolating gridded data to point
> locations for debugging purposes.
>
> Are you running into trouble? Would you like me to send you a fresh
> tarball that includes this change? Would that make it easier?
>
> Thanks
> John
>
> On Fri, Jan 29, 2021 at 5:28 PM Ramos, Mr. Gregory, Contractor, Code
> 7501.1 via RT <met_help at ucar.edu> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> >
> > Which executable actually gets changed with the patch?
> >
> > Greg
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT <met_help at ucar.edu>
> > Sent: Friday, January 29, 2021 3:18 PM
> > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > Greg.Ramos.ctr at nrlmry.navy.mil>
> > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> >
> > OK, thanks for the update. Please let me know if you get stuck.
> >
> > Thanks,
> > John
> >
> > On Fri, Jan 29, 2021 at 3:59 PM Ramos, Mr. Gregory, Contractor,
Code
> > 7501.1 via RT <met_help at ucar.edu> wrote:
> >
> > >
> > > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452 >
> > >
> > > I am trying 8.1.2 now. The compile seems to be going further.
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT <met_help at ucar.edu>
> > > Sent: Friday, January 29, 2021 2:34 PM
> > > To: Ramos, Mr. Gregory, Contractor, Code 7501.1 <
> > > Greg.Ramos.ctr at nrlmry.navy.mil>
> > > Subject: Re: [rt.rap.ucar.edu #98452] Attention John Halley
> > >
> > > Greg,
> > >
> > > Sorry to hear that. Since Justin told me he was using MET
version
> > > 8.1, I made changes to the version of file interp_util.cc which
> > > lives in the
> > > main_v8.1 branch in the MET repository.
> > >
> > >
> > >
https://raw.githubusercontent.com/dtcenter/MET/main_v8.1/met/src/b
> > > as
> > > ic
> > > /vx_util/interp_util.cc
> > >
> > > That *should* be the same version of the file that exists on
your
> system.
> > > But I suppose it is possible that it is not.
> > >
> > > Do you still have the version of that file that does compile? If
> > > you send me that file, I could apply the same set of changes
that
> > > Justin wants to that file and send it back to you.
> > >
> > > John
> > >
> > > On Fri, Jan 29, 2021 at 2:52 PM Ramos, Mr. Gregory, Contractor,
> > > Code
> > > 7501.1 via RT <met_help at ucar.edu> wrote:
> > >
> > > >
> > > > Fri Jan 29 14:52:39 2021: Request 98452 was acted upon.
> > > > Transaction: Ticket created by Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Queue: met_help
> > > > Subject: Attention John Halley
> > > > Owner: Nobody
> > > > Requestors: Greg.Ramos.ctr at nrlmry.navy.mil
> > > > Status: new
> > > > Ticket <URL:
> > > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=98452
> > > > >
> > > >
> > > >
> > > > I am working with Justin Tsu trying to compile MET with your
patch.
> > > > Met
> > > > 8.1 compiles fine without the patch. After a clean compile, I
> > > > did a make distclean. Then cp /users/ramos/interp_util.cc
> > > > ./src/basic/vx_util/interp_util.cc
> > > >
> > > >
> > > >
> > > > And ran ./configure again. It won't compile with the patch.
> > > >
> > > >
> > > >
> > > > Greg Ramos
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
------------------------------------------------
Subject: Attention John Halley
From: John Halley Gotway
Time: Tue Feb 02 12:03:34 2021
Justin,
Great, glad we're narrowing in on the source of the difference. Here's
where those weights are computed:
https://github.com/dtcenter/MET/blob/0fe2e42609120df236f74ae23c07f3fa4b930247/met/src/basic/vx_util/interp_util.cc#L763
(x, y) is the lower-left corner of the gridbox containing that point.
* // Compute dx and dy dx = obs_x - x;*
* dy = obs_y - y;*
* // Compute weights for 4 corner points*
* wtsw = (1.0-dx) * (1.0-dy); wtse = dx * (1.0-dy); wtnw = (1.0-
dx) *
dy; wtne = dx * dy;*
*...*
* bilin_v = wtsw * dp.get(x, y) + wtse *
dp.get(x+1, y) + wtnw * dp.get(x, y+1) +
wtne * dp.get(x+1, y+1);*
Perhaps there's a bug somewhere in here?
John
------------------------------------------------
Subject: Attention John Halley
From: John Halley Gotway
Time: Tue Feb 02 14:24:21 2021
Justin,
I see you sent another email to met-help, but I see what happened... I
did
reply to your question about interpolation weights at 12:03 PM MST
today,
but you weren't actually on that ticket. Greg was listed as the only
requestor. So I just added you to that ticket and am resending my
response
below. I'll just delete that new ticket from earlier today and stick
with
this one.
Thanks,
John
Justin,
Great, glad we're narrowing in on the source of the difference. Here's
where those weights are computed:
https://github.com/dtcenter/MET/blob/0fe2e42609120df236f74ae23c07f3fa4b930247/met/src/basic/vx_util/interp_util.cc#L763
(x, y) is the lower-left corner of the gridbox containing that point.
* // Compute dx and dy dx = obs_x - x;*
* dy = obs_y - y;*
* // Compute weights for 4 corner points*
* wtsw = (1.0-dx) * (1.0-dy); wtse = dx * (1.0-dy); wtnw = (1.0-
dx) *
dy; wtne = dx * dy;*
*...*
* bilin_v = wtsw * dp.get(x, y) + wtse *
dp.get(x+1, y) + wtnw * dp.get(x, y+1) +
wtne * dp.get(x+1, y+1);*
Perhaps there's a bug somewhere in here?
John
On Tue, Feb 2, 2021 at 12:03 PM John Halley Gotway <johnhg at ucar.edu>
wrote:
> Justin,
>
> Great, glad we're narrowing in on the source of the difference.
Here's
> where those weights are computed:
>
>
https://github.com/dtcenter/MET/blob/0fe2e42609120df236f74ae23c07f3fa4b930247/met/src/basic/vx_util/interp_util.cc#L763
>
> (x, y) is the lower-left corner of the gridbox containing that
point.
>
>
>
> * // Compute dx and dy dx = obs_x - x;*
> * dy = obs_y - y;*
>
> * // Compute weights for 4 corner points*
>
>
>
> * wtsw = (1.0-dx) * (1.0-dy); wtse = dx * (1.0-dy); wtnw =
(1.0-dx)
> * dy; wtne = dx * dy;*
> *...*
>
>
>
> * bilin_v = wtsw * dp.get(x, y) + wtse
*
> dp.get(x+1, y) + wtnw * dp.get(x, y+1) +
> wtne * dp.get(x+1, y+1);*
>
> Perhaps there's a bug somewhere in here?
>
> John
>
------------------------------------------------
More information about the Met_help
mailing list