[Met_help] [rt.rap.ucar.edu #96898] History for Request assistance with METViewer V3.1 install

Tue Oct 13 13:43:57 MDT 2020

----------------------------------------------------------------
  Initial Request
----------------------------------------------------------------

Tatiana - 

Could you please assist us with the upgrade to METViewer V3.1? For V2.11 you did share the .war and .tar files with METviewer executables and the web app with us. I guess the first step is for you to build 3.1 for us and send us the files. 

Thanks.

R/
John
________________________________________
From: Tatiana Burek via RT [met_help at ucar.edu]
Sent: Tuesday, April 14, 2020 9:17 AM
To: Raby, John W CIV USARMY CCDC ARL (USA)
Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11 question (UNCLASSIFIED)

All active links contained in this email were disabled.  Please verify the identity of the sender, and confirm the authenticity of all links contained within the message prior to copying and pasting the address to a Web browser.

----

Hi John,

As I remember, I shared with you .war and .tar files with METviewer executables and the web app. I also gave you instructions where and how to install these files.
I can build METviewer 3.0 for you and you will install it the same way as METviewer 2.11.  There is one more step you need to do for this release. We updated the database schema and you need to update your databases to work with v 3.0. I will provide SQL script that should take care of that. You just need to run it on all METviewer databases.
Let me know if you would like to proceed with the update and I will sent files to you.

Tatiana

On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> CLASSIFICATION: UNCLASSIFIED
>
> Thanks, John.
>
> R/
> John
>
> -----Original Message-----
> From: John Halley Gotway via RT [Caution-mailto:met_help at ucar.edu]
> Sent: Monday, April 13, 2020 3:17 PM
> To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
>  Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
> v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled.  Please verify
> the
> identity of the sender, and confirm the authenticity of all links
> contained
> within the message prior to copying and pasting the address to a Web
> browser.
>
>
>
>
> ----
>
> John,
>
> I just reassigned ownership of this ticket from me to Tatiana.
>
> Tatiana, please advise John Raby on how he can upgrade to METviewer
> 3.0 so he
> can make use of some of its enhancements.
>
> Thanks,
> John
>
> On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> met_help at ucar.edu> wrote:
>
> >
> > <Caution-Caution-url:
> > Caution-Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> > John -
> >
> > My version is v2.11. What do you recommend as the best way to
> > upgrade?
> > Tatiana
> > worked with us to install the web interface version 2.11 on my local
> > linux workstation last July.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT [Caution-Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 1:51 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
> > v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled.  Please
> > verify
> > the identity of the sender, and confirm the authenticity of all links
> > contained within the message prior to copying and pasting the address
> > to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > Can you tell me what version of METviewer you're running?  It should
> > be listed in the top-left corner of the GUI window.  Plotting the
> > TOTAL counts was actually a recent addition in version 3.0.  Here's
> > the GitHub issue which describes that change:
> > Caution-Caution-Caution-https://github.com/NCAR/METviewer/issues/170
> >
> > John
> >
> > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > <Caution-Caution-Caution-url:
> > > Caution-Caution-
> > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > > 902 >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > Thanks for getting me back on track. I loaded the db containing
> > > only
> > > .stat files and I looked for "TOTAL" in the list of dependent
> > > variables but it isn't there.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT
> > > [Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 1:28 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
> > > v2.11 question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled.  Please
> > > verify the identity of the sender, and confirm the authenticity of
> > > all links contained within the message prior to copying and pasting
> > > the address to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > METviewer only loads files ending in the ".stat" (for output for
> > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and files
> > > ending in "_obj.txt"
> > > for
> > > files from MODE and also the files that MTD creates.  It does NOT
> > > load files ending in "_mpr.txt".
> > >
> > > To plot the number of matched pairs included in the computation of
> > > statistics, I'd recommend plotting the TOTAL column from the SL1L2,
> > > CNT, or CNT statistics line type... as you've already found.
> > >
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > >        Queue: met_help
> > > >      Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > >        Owner: Nobody
> > > >   Requestors: john.w.raby2.civ at mail.mil
> > > >       Status: new
> > > >  Ticket <Caution-Caution-Caution-Caution-url:
> > > > Caution-Caution-Caution-
> > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > html?id=94
> > > > 902 >
> > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > If I want to plot the number of observations (or matched pairs)
> > > > which were used to compute a given continuous error statistic
> > > > such
> > > > as ME do I need to load the MPR.txt files in addition to the
> > > > .stat
> > > > files in the database or is there a way to extract the value
> > > > (TOTAL) from the .stat files only. I reference the TOTAL values
> > > >  from the Point-Stat CNT.txt file which shows the total number of
> > > > matched
> > > > pairs.
> > > >
> > > > I did an experiment by loading in one db, just .stat files and in
> > > > another db, I loaded the same .stat files and the MPR.txt files
> > > > together. In METViewer, when I load the db with no MPR.txt files
> > > > I
> > > > do not see the attribute stat "MPR_OBS" available for selection.
> > > > When I load the db which includes both .stat and MPR.txt files, I
> > > > do see the attribute stat "MPR_OBS". When I plot this stat, I see
> > > > what appears to be a number count which, I believe, is the number
> > > > of matched pairs or "TOTAL"
> > > >
> > > > R/
> > > > John
> > > >
> > > > Mr. John W. Raby
> > > > U.S. Army Research Laboratory
> > > > White Sands Missile Range, NM 88002
> > > > Office:(575) 678-2004 DSN 258-2004
> > > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX (575)
> > > > 678-1230 DSN 258-1230
> > > > Email: john.w.raby2.civ at mail.mil
> > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> >
>
> CLASSIFICATION: UNCLASSIFIED

----------------------------------------------------------------
  Complete Ticket History
----------------------------------------------------------------

Subject: Request assistance with METViewer V3.1 install
From: Tatiana Burek
Time: Thu Oct 01 08:35:26 2020

Hi John

We are in the process of replacing R with Python. This is a long
process and would take us a few releases before we complete this task.
v3.1 is the first attempt where we implemented and included
Performance and Roc plots. At this point Python execution is optional
and you still could use METviewer with R the same way as you using it
now.

If you are not planning to use METviewer Python you don't need to
install Python 3.6 environment  at this moment but you will need it in
the future when METviewer Python would be a requirement.
Let me know your decision and if you decide to go with Python I could
send you instructions on how to  install it.

Tatiana

On Tue Sep 29 16:53:58 2020, john.w.raby2.civ at mail.mil wrote:
> Tatiana -
>
> Could you please assist us with the upgrade to METViewer V3.1? For
> V2.11 you did share the .war and .tar files with METviewer
executables
> and the web app with us. I guess the first step is for you to build
> 3.1 for us and send us the files.
>
> Thanks.
>
> R/
> John
> ________________________________________
> From: Tatiana Burek via RT [met_help at ucar.edu]
> Sent: Tuesday, April 14, 2020 9:17 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled.  Please
verify
> the identity of the sender, and confirm the authenticity of all
links
> contained within the message prior to copying and pasting the
address
> to a Web browser.
>
>
>
>
> ----
>
> Hi John,
>
> As I remember, I shared with you .war and .tar files with METviewer
> executables and the web app. I also gave you instructions where and
> how to install these files.
> I can build METviewer 3.0 for you and you will install it the same
way
> as METviewer 2.11.  There is one more step you need to do for this
> release. We updated the database schema and you need to update your
> databases to work with v 3.0. I will provide SQL script that should
> take care of that. You just need to run it on all METviewer
databases.
> Let me know if you would like to proceed with the update and I will
> sent files to you.
>
> Tatiana
>
> On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> > Thanks, John.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT [Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 3:17 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> >  Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> > v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled.  Please
> > verify
> > the
> > identity of the sender, and confirm the authenticity of all links
> > contained
> > within the message prior to copying and pasting the address to a
Web
> > browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > I just reassigned ownership of this ticket from me to Tatiana.
> >
> > Tatiana, please advise John Raby on how he can upgrade to
METviewer
> > 3.0 so he
> > can make use of some of its enhancements.
> >
> > Thanks,
> > John
> >
> > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > <Caution-Caution-url:
> > > Caution-Caution-
> > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > John -
> > >
> > > My version is v2.11. What do you recommend as the best way to
> > > upgrade?
> > > Tatiana
> > > worked with us to install the web interface version 2.11 on my
> > > local
> > > linux workstation last July.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT [Caution-Caution-
> > > mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 1:51 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > MetViewer
> > > v2.11
> > > question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled.  Please
> > > verify
> > > the identity of the sender, and confirm the authenticity of all
> > > links
> > > contained within the message prior to copying and pasting the
> > > address
> > > to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > Can you tell me what version of METviewer you're running?  It
> > > should
> > > be listed in the top-left corner of the GUI window.  Plotting
the
> > > TOTAL counts was actually a recent addition in version 3.0.
Here's
> > > the GitHub issue which describes that change:
> > > Caution-Caution-Caution-
> > > https://github.com/NCAR/METviewer/issues/170
> > >
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > <Caution-Caution-Caution-url:
> > > > Caution-Caution-
> > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > > > 902 >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > Thanks for getting me back on track. I loaded the db
containing
> > > > only
> > > > .stat files and I looked for "TOTAL" in the list of dependent
> > > > variables but it isn't there.
> > > >
> > > > R/
> > > > John
> > > >
> > > > -----Original Message-----
> > > > From: John Halley Gotway via RT
> > > > [Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > > Sent: Monday, April 13, 2020 1:28 PM
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > > <john.w.raby2.civ at mail.mil>
> > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> > > > v2.11 question (UNCLASSIFIED)
> > > >
> > > > All active links contained in this email were disabled.
Please
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of
> > > > all links contained within the message prior to copying and
> > > > pasting
> > > > the address to a Web browser.
> > > >
> > > >
> > > >
> > > >
> > > > ----
> > > >
> > > > John,
> > > >
> > > > METviewer only loads files ending in the ".stat" (for output
for
> > > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and
files
> > > > ending in "_obj.txt"
> > > > for
> > > > files from MODE and also the files that MTD creates.  It does
NOT
> > > > load files ending in "_mpr.txt".
> > > >
> > > > To plot the number of matched pairs included in the
computation
> > > > of
> > > > statistics, I'd recommend plotting the TOTAL column from the
> > > > SL1L2,
> > > > CNT, or CNT statistics line type... as you've already found.
> > > >
> > > > John
> > > >
> > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > > > met_help at ucar.edu> wrote:
> > > >
> > > > >
> > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > > >        Queue: met_help
> > > > >      Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > > >        Owner: Nobody
> > > > >   Requestors: john.w.raby2.civ at mail.mil
> > > > >       Status: new
> > > > >  Ticket <Caution-Caution-Caution-Caution-url:
> > > > > Caution-Caution-Caution-
> > > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > > html?id=94
> > > > > 902 >
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > > If I want to plot the number of observations (or matched
pairs)
> > > > > which were used to compute a given continuous error
statistic
> > > > > such
> > > > > as ME do I need to load the MPR.txt files in addition to the
> > > > > .stat
> > > > > files in the database or is there a way to extract the value
> > > > > (TOTAL) from the .stat files only. I reference the TOTAL
values
> > > > >  from the Point-Stat CNT.txt file which shows the total
number
> > > > > of
> > > > > matched
> > > > > pairs.
> > > > >
> > > > > I did an experiment by loading in one db, just .stat files
and
> > > > > in
> > > > > another db, I loaded the same .stat files and the MPR.txt
files
> > > > > together. In METViewer, when I load the db with no MPR.txt
> > > > > files
> > > > > I
> > > > > do not see the attribute stat "MPR_OBS" available for
> > > > > selection.
> > > > > When I load the db which includes both .stat and MPR.txt
files,
> > > > > I
> > > > > do see the attribute stat "MPR_OBS". When I plot this stat,
I
> > > > > see
> > > > > what appears to be a number count which, I believe, is the
> > > > > number
> > > > > of matched pairs or "TOTAL"
> > > > >
> > > > > R/
> > > > > John
> > > > >
> > > > > Mr. John W. Raby
> > > > > U.S. Army Research Laboratory
> > > > > White Sands Missile Range, NM 88002
> > > > > Office:(575) 678-2004 DSN 258-2004
> > > > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
> > > > > (575)
> > > > > 678-1230 DSN 258-1230
> > > > > Email: john.w.raby2.civ at mail.mil
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED

------------------------------------------------
Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request assistance with METViewer V3.1 install (UNCLASSIFIED)
From: reynaldo.a.armendarez.ctr at mail.mil
Time: Thu Oct 01 09:44:41 2020

CLASSIFICATION: UNCLASSIFIED

We should hold off upgrading Met viewer until ucar has finalized their
upgrades.

Thanks,
Rey

-----Original Message-----
From: Tatiana Burek via RT <met_help at ucar.edu>
Sent: Thursday, October 1, 2020 8:35 AM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
<reynaldo.a.armendarez.ctr at mail.mil>
Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request assistance
with METViewer V3.1 install

All active links contained in this email were disabled.  Please verify
the identity of the sender, and confirm the authenticity of all links
contained within the message prior to copying and pasting the address
to a Web browser.

----

Hi John

We are in the process of replacing R with Python. This is a long
process and would take us a few releases before we complete this task.
v3.1 is the first attempt where we implemented and included
Performance and Roc plots. At this point Python execution is optional
and you still could use METviewer with R the same way as you using it
now.

If you are not planning to use METviewer Python you don't need to
install Python 3.6 environment  at this moment but you will need it in
the future when METviewer Python would be a requirement.
Let me know your decision and if you decide to go with Python I could
send you instructions on how to  install it.

Tatiana

On Tue Sep 29 16:53:58 2020, john.w.raby2.civ at mail.mil wrote:
> Tatiana -
>
> Could you please assist us with the upgrade to METViewer V3.1? For
> V2.11 you did share the .war and .tar files with METviewer
executables
> and the web app with us. I guess the first step is for you to build
> 3.1 for us and send us the files.
>
> Thanks.
>
> R/
> John
> ________________________________________
> From: Tatiana Burek via RT [met_help at ucar.edu]
> Sent: Tuesday, April 14, 2020 9:17 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled.  Please
verify
> the identity of the sender, and confirm the authenticity of all
links
> contained within the message prior to copying and pasting the
address
> to a Web browser.
>
>
>
>
> ----
>
> Hi John,
>
> As I remember, I shared with you .war and .tar files with METviewer
> executables and the web app. I also gave you instructions where and
> how to install these files.
> I can build METviewer 3.0 for you and you will install it the same
way
> as METviewer 2.11.  There is one more step you need to do for this
> release. We updated the database schema and you need to update your
> databases to work with v 3.0. I will provide SQL script that should
> take care of that. You just need to run it on all METviewer
databases.
> Let me know if you would like to proceed with the update and I will
> sent files to you.
>
> Tatiana
>
> On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> > Thanks, John.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT
> > [Caution-Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 3:17 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> >  Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > MetViewer
> > v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled.  Please
> > verify the identity of the sender, and confirm the authenticity of
> > all links contained within the message prior to copying and
pasting
> > the address to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > I just reassigned ownership of this ticket from me to Tatiana.
> >
> > Tatiana, please advise John Raby on how he can upgrade to
METviewer
> > 3.0 so he
> > can make use of some of its enhancements.
> >
> > Thanks,
> > John
> >
> > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > <Caution-Caution-Caution-url:
> > > Caution-Caution-
> > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902
>
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > John -
> > >
> > > My version is v2.11. What do you recommend as the best way to
> > > upgrade?
> > > Tatiana
> > > worked with us to install the web interface version 2.11 on my
> > > local linux workstation last July.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT [Caution-Caution-
> > > Caution-mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 1:51 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > MetViewer
> > > v2.11
> > > question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled.  Please
> > > verify the identity of the sender, and confirm the authenticity
of
> > > all links contained within the message prior to copying and
> > > pasting the address to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > Can you tell me what version of METviewer you're running?  It
> > > should be listed in the top-left corner of the GUI window.
> > > Plotting the TOTAL counts was actually a recent addition in
> > > version 3.0.  Here's the GitHub issue which describes that
change:
> > > Caution-Caution-Caution-
> > > Caution-https://github.com/NCAR/METviewer/issues/170
> > >
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > <Caution-Caution-Caution-Caution-url:
> > > > Caution-Caution-
> > > > Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?i
> > > > d=94
> > > > 902 >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > Thanks for getting me back on track. I loaded the db
containing
> > > > only .stat files and I looked for "TOTAL" in the list of
> > > > dependent variables but it isn't there.
> > > >
> > > > R/
> > > > John
> > > >
> > > > -----Original Message-----
> > > > From: John Halley Gotway via RT
> > > > [Caution-Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > > Sent: Monday, April 13, 2020 1:28 PM
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > > <john.w.raby2.civ at mail.mil>
> > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> > > > v2.11 question (UNCLASSIFIED)
> > > >
> > > > All active links contained in this email were disabled.
Please
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of all links contained within the message prior to copying and
> > > > pasting the address to a Web browser.
> > > >
> > > >
> > > >
> > > >
> > > > ----
> > > >
> > > > John,
> > > >
> > > > METviewer only loads files ending in the ".stat" (for output
for
> > > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and
> > > > files ending in "_obj.txt"
> > > > for
> > > > files from MODE and also the files that MTD creates.  It does
> > > > NOT load files ending in "_mpr.txt".
> > > >
> > > > To plot the number of matched pairs included in the
computation
> > > > of statistics, I'd recommend plotting the TOTAL column from
the
> > > > SL1L2, CNT, or CNT statistics line type... as you've already
> > > > found.
> > > >
> > > > John
> > > >
> > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > > > met_help at ucar.edu> wrote:
> > > >
> > > > >
> > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > > >        Queue: met_help
> > > > >      Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > > >        Owner: Nobody
> > > > >   Requestors: john.w.raby2.civ at mail.mil
> > > > >       Status: new
> > > > >  Ticket <Caution-Caution-Caution-Caution-Caution-url:
> > > > > Caution-Caution-Caution-
> > > > > Caution-Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > > html?id=94
> > > > > 902 >
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > > If I want to plot the number of observations (or matched
> > > > > pairs) which were used to compute a given continuous error
> > > > > statistic such as ME do I need to load the MPR.txt files in
> > > > > addition to the .stat files in the database or is there a
way
> > > > > to extract the value
> > > > > (TOTAL) from the .stat files only. I reference the TOTAL
> > > > > values  from the Point-Stat CNT.txt file which shows the
total
> > > > > number of matched pairs.
> > > > >
> > > > > I did an experiment by loading in one db, just .stat files
and
> > > > > in another db, I loaded the same .stat files and the MPR.txt
> > > > > files together. In METViewer, when I load the db with no
> > > > > MPR.txt files I do not see the attribute stat "MPR_OBS"
> > > > > available for selection.
> > > > > When I load the db which includes both .stat and MPR.txt
> > > > > files, I do see the attribute stat "MPR_OBS". When I plot
this
> > > > > stat, I see what appears to be a number count which, I
> > > > > believe, is the number of matched pairs or "TOTAL"
> > > > >
> > > > > R/
> > > > > John
> > > > >
> > > > > Mr. John W. Raby
> > > > > U.S. Army Research Laboratory
> > > > > White Sands Missile Range, NM 88002
> > > > > Office:(575) 678-2004 DSN 258-2004
> > > > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
> > > > > (575)
> > > > > 678-1230 DSN 258-1230
> > > > > Email: john.w.raby2.civ at mail.mil
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED

CLASSIFICATION: UNCLASSIFIED

------------------------------------------------
Subject: Request assistance with METViewer V3.1 install
From: Raby, John W USA CIV
Time: Thu Oct 01 14:13:05 2020

CLASSIFICATION: UNCLASSIFIED

Tatiana -

Rey and I agree that that we will continue using the V2.11 version. Is
there
any value to upgrading to V3.0 assuming that it still uses R and not
python?

R/
John

-----Original Message-----
From: Tatiana Burek via RT <met_help at ucar.edu>
Sent: Thursday, October 1, 2020 8:35 AM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
<reynaldo.a.armendarez.ctr at mail.mil>
Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request assistance
with
METViewer V3.1 install

All active links contained in this email were disabled.  Please verify
the
identity of the sender, and confirm the authenticity of all links
contained
within the message prior to copying and pasting the address to a Web
browser.

----

Hi John

We are in the process of replacing R with Python. This is a long
process and
would take us a few releases before we complete this task. v3.1 is the
first
attempt where we implemented and included Performance and Roc plots.
At this
point Python execution is optional and you still could use METviewer
with R
the same way as you using it now.

If you are not planning to use METviewer Python you don't need to
install
Python 3.6 environment  at this moment but you will need it in the
future when
METviewer Python would be a requirement.
Let me know your decision and if you decide to go with Python I could
send you
instructions on how to  install it.

Tatiana

On Tue Sep 29 16:53:58 2020, john.w.raby2.civ at mail.mil wrote:
> Tatiana -
>
> Could you please assist us with the upgrade to METViewer V3.1? For
> V2.11 you did share the .war and .tar files with METviewer
executables
> and the web app with us. I guess the first step is for you to build
> 3.1 for us and send us the files.
>
> Thanks.
>
> R/
> John
> ________________________________________
> From: Tatiana Burek via RT [met_help at ucar.edu]
> Sent: Tuesday, April 14, 2020 9:17 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled.  Please
verify
> the identity of the sender, and confirm the authenticity of all
links
> contained within the message prior to copying and pasting the
address
> to a Web browser.
>
>
>
>
> ----
>
> Hi John,
>
> As I remember, I shared with you .war and .tar files with METviewer
> executables and the web app. I also gave you instructions where and
> how to install these files.
> I can build METviewer 3.0 for you and you will install it the same
way
> as METviewer 2.11.  There is one more step you need to do for this
> release. We updated the database schema and you need to update your
> databases to work with v 3.0. I will provide SQL script that should
> take care of that. You just need to run it on all METviewer
databases.
> Let me know if you would like to proceed with the update and I will
> sent files to you.
>
> Tatiana
>
> On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> > Thanks, John.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT
> > [Caution-Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 3:17 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> >  Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > MetViewer
> > v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled.  Please
> > verify the identity of the sender, and confirm the authenticity of
> > all links contained within the message prior to copying and
pasting
> > the address to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > I just reassigned ownership of this ticket from me to Tatiana.
> >
> > Tatiana, please advise John Raby on how he can upgrade to
METviewer
> > 3.0 so he
> > can make use of some of its enhancements.
> >
> > Thanks,
> > John
> >
> > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > <Caution-Caution-Caution-url:
> > > Caution-Caution-
> > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902
>
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > John -
> > >
> > > My version is v2.11. What do you recommend as the best way to
> > > upgrade?
> > > Tatiana
> > > worked with us to install the web interface version 2.11 on my
> > > local linux workstation last July.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT [Caution-Caution-
> > > Caution-mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 1:51 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > MetViewer
> > > v2.11
> > > question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled.  Please
> > > verify the identity of the sender, and confirm the authenticity
of
> > > all links contained within the message prior to copying and
> > > pasting the address to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > Can you tell me what version of METviewer you're running?  It
> > > should be listed in the top-left corner of the GUI window.
> > > Plotting the TOTAL counts was actually a recent addition in
> > > version 3.0.  Here's the GitHub issue which describes that
change:
> > > Caution-Caution-Caution-
> > > Caution-https://github.com/NCAR/METviewer/issues/170
> > >
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > <Caution-Caution-Caution-Caution-url:
> > > > Caution-Caution-
> > > > Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?i
> > > > d=94
> > > > 902 >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > Thanks for getting me back on track. I loaded the db
containing
> > > > only .stat files and I looked for "TOTAL" in the list of
> > > > dependent variables but it isn't there.
> > > >
> > > > R/
> > > > John
> > > >
> > > > -----Original Message-----
> > > > From: John Halley Gotway via RT
> > > > [Caution-Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > > Sent: Monday, April 13, 2020 1:28 PM
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > > <john.w.raby2.civ at mail.mil>
> > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> > > > v2.11 question (UNCLASSIFIED)
> > > >
> > > > All active links contained in this email were disabled.
Please
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of all links contained within the message prior to copying and
> > > > pasting the address to a Web browser.
> > > >
> > > >
> > > >
> > > >
> > > > ----
> > > >
> > > > John,
> > > >
> > > > METviewer only loads files ending in the ".stat" (for output
for
> > > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and
> > > > files ending in "_obj.txt"
> > > > for
> > > > files from MODE and also the files that MTD creates.  It does
> > > > NOT load files ending in "_mpr.txt".
> > > >
> > > > To plot the number of matched pairs included in the
computation
> > > > of statistics, I'd recommend plotting the TOTAL column from
the
> > > > SL1L2, CNT, or CNT statistics line type... as you've already
> > > > found.
> > > >
> > > > John
> > > >
> > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > > > met_help at ucar.edu> wrote:
> > > >
> > > > >
> > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > > >        Queue: met_help
> > > > >      Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > > >        Owner: Nobody
> > > > >   Requestors: john.w.raby2.civ at mail.mil
> > > > >       Status: new
> > > > >  Ticket <Caution-Caution-Caution-Caution-Caution-url:
> > > > > Caution-Caution-Caution-
> > > > > Caution-Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > > html?id=94
> > > > > 902 >
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > > If I want to plot the number of observations (or matched
> > > > > pairs) which were used to compute a given continuous error
> > > > > statistic such as ME do I need to load the MPR.txt files in
> > > > > addition to the .stat files in the database or is there a
way
> > > > > to extract the value
> > > > > (TOTAL) from the .stat files only. I reference the TOTAL
> > > > > values  from the Point-Stat CNT.txt file which shows the
total
> > > > > number of matched pairs.
> > > > >
> > > > > I did an experiment by loading in one db, just .stat files
and
> > > > > in another db, I loaded the same .stat files and the MPR.txt
> > > > > files together. In METViewer, when I load the db with no
> > > > > MPR.txt files I do not see the attribute stat "MPR_OBS"
> > > > > available for selection.
> > > > > When I load the db which includes both .stat and MPR.txt
> > > > > files, I do see the attribute stat "MPR_OBS". When I plot
this
> > > > > stat, I see what appears to be a number count which, I
> > > > > believe, is the number of matched pairs or "TOTAL"
> > > > >
> > > > > R/
> > > > > John
> > > > >
> > > > > Mr. John W. Raby
> > > > > U.S. Army Research Laboratory
> > > > > White Sands Missile Range, NM 88002
> > > > > Office:(575) 678-2004 DSN 258-2004
> > > > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
> > > > > (575)
> > > > > 678-1230 DSN 258-1230
> > > > > Email: john.w.raby2.civ at mail.mil
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED

CLASSIFICATION: UNCLASSIFIED

------------------------------------------------
Subject: Request assistance with METViewer V3.1 install
From: Tatiana Burek
Time: Thu Oct 01 14:31:01 2020

John,
You can find the list of new features and bug fixes for versions 3.0,
3.1_beta1 and 3.1 here:
http://dtcenter.ucar.edu/met/metviewer/doc/versions.html

All these versions are using R - Python is optional.

Tatiana

On Thu Oct 01 14:13:05 2020, john.w.raby2.civ at mail.mil wrote:
> CLASSIFICATION: UNCLASSIFIED
>
> Tatiana -
>
> Rey and I agree that that we will continue using the V2.11 version.
Is
> there
> any value to upgrading to V3.0 assuming that it still uses R and not
> python?
>
> R/
> John
>
> -----Original Message-----
> From: Tatiana Burek via RT <met_help at ucar.edu>
> Sent: Thursday, October 1, 2020 8:35 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
>  Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
> <reynaldo.a.armendarez.ctr at mail.mil>
>  Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request
assistance
> with
> METViewer V3.1 install
>
> All active links contained in this email were disabled.  Please
verify
> the
> identity of the sender, and confirm the authenticity of all links
> contained
> within the message prior to copying and pasting the address to a Web
> browser.
>
>
>
>
> ----
>
> Hi John
>
> We are in the process of replacing R with Python. This is a long
> process and
> would take us a few releases before we complete this task. v3.1 is
the
> first
> attempt where we implemented and included Performance and Roc plots.
> At this
> point Python execution is optional and you still could use METviewer
> with R
> the same way as you using it now.
>
> If you are not planning to use METviewer Python you don't need to
> install
> Python 3.6 environment  at this moment but you will need it in the
> future when
> METviewer Python would be a requirement.
> Let me know your decision and if you decide to go with Python I
could
> send you
> instructions on how to  install it.
>
> Tatiana
>
>
> On Tue Sep 29 16:53:58 2020, john.w.raby2.civ at mail.mil wrote:
> > Tatiana -
> >
> > Could you please assist us with the upgrade to METViewer V3.1? For
> > V2.11 you did share the .war and .tar files with METviewer
> > executables
> > and the web app with us. I guess the first step is for you to
build
> > 3.1 for us and send us the files.
> >
> > Thanks.
> >
> > R/
> > John
> > ________________________________________
> > From: Tatiana Burek via RT [met_help at ucar.edu]
> > Sent: Tuesday, April 14, 2020 9:17 AM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled.  Please
> > verify
> > the identity of the sender, and confirm the authenticity of all
links
> > contained within the message prior to copying and pasting the
address
> > to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > Hi John,
> >
> > As I remember, I shared with you .war and .tar files with
METviewer
> > executables and the web app. I also gave you instructions where
and
> > how to install these files.
> > I can build METviewer 3.0 for you and you will install it the same
> > way
> > as METviewer 2.11.  There is one more step you need to do for this
> > release. We updated the database schema and you need to update
your
> > databases to work with v 3.0. I will provide SQL script that
should
> > take care of that. You just need to run it on all METviewer
> > databases.
> > Let me know if you would like to proceed with the update and I
will
> > sent files to you.
> >
> > Tatiana
> >
> > On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > Thanks, John.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT
> > > [Caution-Caution-mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 3:17 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > >  Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > MetViewer
> > > v2.11
> > > question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled.  Please
> > > verify the identity of the sender, and confirm the authenticity
of
> > > all links contained within the message prior to copying and
pasting
> > > the address to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > I just reassigned ownership of this ticket from me to Tatiana.
> > >
> > > Tatiana, please advise John Raby on how he can upgrade to
METviewer
> > > 3.0 so he
> > > can make use of some of its enhancements.
> > >
> > > Thanks,
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > <Caution-Caution-Caution-url:
> > > > Caution-Caution-
> > > > Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > John -
> > > >
> > > > My version is v2.11. What do you recommend as the best way to
> > > > upgrade?
> > > > Tatiana
> > > > worked with us to install the web interface version 2.11 on my
> > > > local linux workstation last July.
> > > >
> > > > R/
> > > > John
> > > >
> > > > -----Original Message-----
> > > > From: John Halley Gotway via RT [Caution-Caution-
> > > > Caution-mailto:met_help at ucar.edu]
> > > > Sent: Monday, April 13, 2020 1:51 PM
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > > <john.w.raby2.civ at mail.mil>
> > > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > > MetViewer
> > > > v2.11
> > > > question (UNCLASSIFIED)
> > > >
> > > > All active links contained in this email were disabled.
Please
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of
> > > > all links contained within the message prior to copying and
> > > > pasting the address to a Web browser.
> > > >
> > > >
> > > >
> > > >
> > > > ----
> > > >
> > > > John,
> > > >
> > > > Can you tell me what version of METviewer you're running?  It
> > > > should be listed in the top-left corner of the GUI window.
> > > > Plotting the TOTAL counts was actually a recent addition in
> > > > version 3.0.  Here's the GitHub issue which describes that
> > > > change:
> > > > Caution-Caution-Caution-
> > > > Caution-https://github.com/NCAR/METviewer/issues/170
> > > >
> > > > John
> > > >
> > > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > > > met_help at ucar.edu> wrote:
> > > >
> > > > >
> > > > > <Caution-Caution-Caution-Caution-url:
> > > > > Caution-Caution-
> > > > > Caution-Caution-
> > > > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?i
> > > > > d=94
> > > > > 902 >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > > Thanks for getting me back on track. I loaded the db
containing
> > > > > only .stat files and I looked for "TOTAL" in the list of
> > > > > dependent variables but it isn't there.
> > > > >
> > > > > R/
> > > > > John
> > > > >
> > > > > -----Original Message-----
> > > > > From: John Halley Gotway via RT
> > > > > [Caution-Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > > > Sent: Monday, April 13, 2020 1:28 PM
> > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > > > <john.w.raby2.civ at mail.mil>
> > > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > > > MetViewer
> > > > > v2.11 question (UNCLASSIFIED)
> > > > >
> > > > > All active links contained in this email were disabled.
Please
> > > > > verify the identity of the sender, and confirm the
authenticity
> > > > > of all links contained within the message prior to copying
and
> > > > > pasting the address to a Web browser.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ----
> > > > >
> > > > > John,
> > > > >
> > > > > METviewer only loads files ending in the ".stat" (for output
> > > > > for
> > > > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and
> > > > > files ending in "_obj.txt"
> > > > > for
> > > > > files from MODE and also the files that MTD creates.  It
does
> > > > > NOT load files ending in "_mpr.txt".
> > > > >
> > > > > To plot the number of matched pairs included in the
computation
> > > > > of statistics, I'd recommend plotting the TOTAL column from
the
> > > > > SL1L2, CNT, or CNT statistics line type... as you've already
> > > > > found.
> > > > >
> > > > > John
> > > > >
> > > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT
<
> > > > > met_help at ucar.edu> wrote:
> > > > >
> > > > > >
> > > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > > > >        Queue: met_help
> > > > > >      Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > > > >        Owner: Nobody
> > > > > >   Requestors: john.w.raby2.civ at mail.mil
> > > > > >       Status: new
> > > > > >  Ticket <Caution-Caution-Caution-Caution-Caution-url:
> > > > > > Caution-Caution-Caution-
> > > > > > Caution-Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > > > html?id=94
> > > > > > 902 >
> > > > > >
> > > > > >
> > > > > > CLASSIFICATION: UNCLASSIFIED
> > > > > >
> > > > > > If I want to plot the number of observations (or matched
> > > > > > pairs) which were used to compute a given continuous error
> > > > > > statistic such as ME do I need to load the MPR.txt files
in
> > > > > > addition to the .stat files in the database or is there a
way
> > > > > > to extract the value
> > > > > > (TOTAL) from the .stat files only. I reference the TOTAL
> > > > > > values  from the Point-Stat CNT.txt file which shows the
> > > > > > total
> > > > > > number of matched pairs.
> > > > > >
> > > > > > I did an experiment by loading in one db, just .stat files
> > > > > > and
> > > > > > in another db, I loaded the same .stat files and the
MPR.txt
> > > > > > files together. In METViewer, when I load the db with no
> > > > > > MPR.txt files I do not see the attribute stat "MPR_OBS"
> > > > > > available for selection.
> > > > > > When I load the db which includes both .stat and MPR.txt
> > > > > > files, I do see the attribute stat "MPR_OBS". When I plot
> > > > > > this
> > > > > > stat, I see what appears to be a number count which, I
> > > > > > believe, is the number of matched pairs or "TOTAL"
> > > > > >
> > > > > > R/
> > > > > > John
> > > > > >
> > > > > > Mr. John W. Raby
> > > > > > U.S. Army Research Laboratory
> > > > > > White Sands Missile Range, NM 88002
> > > > > > Office:(575) 678-2004 DSN 258-2004
> > > > > > Teleworking: Contact Admin Specialist at (410) 278-6974
FAX
> > > > > > (575)
> > > > > > 678-1230 DSN 258-1230
> > > > > > Email: john.w.raby2.civ at mail.mil
> > > > > >
> > > > > >
> > > > > > CLASSIFICATION: UNCLASSIFIED
> > > > > >
> > > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
>
>
>
> CLASSIFICATION: UNCLASSIFIED

------------------------------------------------
Subject: Request assistance with METViewer V3.1 install
From: reynaldo.a.armendarez.ctr at mail.mil
Time: Thu Oct 01 15:14:00 2020

CLASSIFICATION: UNCLASSIFIED

Please disregard the last email sent asking about the tomcat versions,
it was
an oversight on my part.

Thank you,

Rey

-----Original Message-----
From: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
Sent: Thursday, October 1, 2020 1:43 PM
To: 'met_help at ucar.edu' <met_help at ucar.edu>
Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
<reynaldo.a.armendarez.ctr at mail.mil>
Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request
assistance with
METViewer V3.1 install (UNCLASSIFIED)

CLASSIFICATION: UNCLASSIFIED

Tatiana -

Rey and I agree that that we will continue using the V2.11 version. Is
there
any value to upgrading to V3.0 assuming that it still uses R and not
python?

R/
John

-----Original Message-----
From: Tatiana Burek via RT <met_help at ucar.edu>
Sent: Thursday, October 1, 2020 8:35 AM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
<reynaldo.a.armendarez.ctr at mail.mil>
Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request assistance
with
METViewer V3.1 install

All active links contained in this email were disabled.  Please verify
the
identity of the sender, and confirm the authenticity of all links
contained
within the message prior to copying and pasting the address to a Web
browser.

----

Hi John

We are in the process of replacing R with Python. This is a long
process and
would take us a few releases before we complete this task. v3.1 is the
first
attempt where we implemented and included Performance and Roc plots.
At this
point Python execution is optional and you still could use METviewer
with R
the same way as you using it now.

If you are not planning to use METviewer Python you don't need to
install
Python 3.6 environment  at this moment but you will need it in the
future when
METviewer Python would be a requirement.
Let me know your decision and if you decide to go with Python I could
send you
instructions on how to  install it.

Tatiana

On Tue Sep 29 16:53:58 2020, john.w.raby2.civ at mail.mil wrote:
> Tatiana -
>
> Could you please assist us with the upgrade to METViewer V3.1? For
> V2.11 you did share the .war and .tar files with METviewer
executables
> and the web app with us. I guess the first step is for you to build
> 3.1 for us and send us the files.
>
> Thanks.
>
> R/
> John
> ________________________________________
> From: Tatiana Burek via RT [met_help at ucar.edu]
> Sent: Tuesday, April 14, 2020 9:17 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled.  Please
verify
> the identity of the sender, and confirm the authenticity of all
links
> contained within the message prior to copying and pasting the
address
> to a Web browser.
>
>
>
>
> ----
>
> Hi John,
>
> As I remember, I shared with you .war and .tar files with METviewer
> executables and the web app. I also gave you instructions where and
> how to install these files.
> I can build METviewer 3.0 for you and you will install it the same
way
> as METviewer 2.11.  There is one more step you need to do for this
> release. We updated the database schema and you need to update your
> databases to work with v 3.0. I will provide SQL script that should
> take care of that. You just need to run it on all METviewer
databases.
> Let me know if you would like to proceed with the update and I will
> sent files to you.
>
> Tatiana
>
> On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> > Thanks, John.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT
> > [Caution-Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 3:17 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> >  Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > MetViewer
> > v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled.  Please
> > verify the identity of the sender, and confirm the authenticity of
> > all links contained within the message prior to copying and
pasting
> > the address to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > I just reassigned ownership of this ticket from me to Tatiana.
> >
> > Tatiana, please advise John Raby on how he can upgrade to
METviewer
> > 3.0 so he
> > can make use of some of its enhancements.
> >
> > Thanks,
> > John
> >
> > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > <Caution-Caution-Caution-url:
> > > Caution-Caution-
> > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902
>
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > John -
> > >
> > > My version is v2.11. What do you recommend as the best way to
> > > upgrade?
> > > Tatiana
> > > worked with us to install the web interface version 2.11 on my
> > > local linux workstation last July.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT [Caution-Caution-
> > > Caution-mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 1:51 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > MetViewer
> > > v2.11
> > > question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled.  Please
> > > verify the identity of the sender, and confirm the authenticity
of
> > > all links contained within the message prior to copying and
> > > pasting the address to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > Can you tell me what version of METviewer you're running?  It
> > > should be listed in the top-left corner of the GUI window.
> > > Plotting the TOTAL counts was actually a recent addition in
> > > version 3.0.  Here's the GitHub issue which describes that
change:
> > > Caution-Caution-Caution-
> > > Caution-https://github.com/NCAR/METviewer/issues/170
> > >
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > <Caution-Caution-Caution-Caution-url:
> > > > Caution-Caution-
> > > > Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?i
> > > > d=94
> > > > 902 >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > Thanks for getting me back on track. I loaded the db
containing
> > > > only .stat files and I looked for "TOTAL" in the list of
> > > > dependent variables but it isn't there.
> > > >
> > > > R/
> > > > John
> > > >
> > > > -----Original Message-----
> > > > From: John Halley Gotway via RT
> > > > [Caution-Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > > Sent: Monday, April 13, 2020 1:28 PM
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > > <john.w.raby2.civ at mail.mil>
> > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> > > > v2.11 question (UNCLASSIFIED)
> > > >
> > > > All active links contained in this email were disabled.
Please
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of all links contained within the message prior to copying and
> > > > pasting the address to a Web browser.
> > > >
> > > >
> > > >
> > > >
> > > > ----
> > > >
> > > > John,
> > > >
> > > > METviewer only loads files ending in the ".stat" (for output
for
> > > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and
> > > > files ending in "_obj.txt"
> > > > for
> > > > files from MODE and also the files that MTD creates.  It does
> > > > NOT load files ending in "_mpr.txt".
> > > >
> > > > To plot the number of matched pairs included in the
computation
> > > > of statistics, I'd recommend plotting the TOTAL column from
the
> > > > SL1L2, CNT, or CNT statistics line type... as you've already
> > > > found.
> > > >
> > > > John
> > > >
> > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > > > met_help at ucar.edu> wrote:
> > > >
> > > > >
> > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > > >        Queue: met_help
> > > > >      Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > > >        Owner: Nobody
> > > > >   Requestors: john.w.raby2.civ at mail.mil
> > > > >       Status: new
> > > > >  Ticket <Caution-Caution-Caution-Caution-Caution-url:
> > > > > Caution-Caution-Caution-
> > > > > Caution-Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > > html?id=94
> > > > > 902 >
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > > If I want to plot the number of observations (or matched
> > > > > pairs) which were used to compute a given continuous error
> > > > > statistic such as ME do I need to load the MPR.txt files in
> > > > > addition to the .stat files in the database or is there a
way
> > > > > to extract the value
> > > > > (TOTAL) from the .stat files only. I reference the TOTAL
> > > > > values  from the Point-Stat CNT.txt file which shows the
total
> > > > > number of matched pairs.
> > > > >
> > > > > I did an experiment by loading in one db, just .stat files
and
> > > > > in another db, I loaded the same .stat files and the MPR.txt
> > > > > files together. In METViewer, when I load the db with no
> > > > > MPR.txt files I do not see the attribute stat "MPR_OBS"
> > > > > available for selection.
> > > > > When I load the db which includes both .stat and MPR.txt
> > > > > files, I do see the attribute stat "MPR_OBS". When I plot
this
> > > > > stat, I see what appears to be a number count which, I
> > > > > believe, is the number of matched pairs or "TOTAL"
> > > > >
> > > > > R/
> > > > > John
> > > > >
> > > > > Mr. John W. Raby
> > > > > U.S. Army Research Laboratory
> > > > > White Sands Missile Range, NM 88002
> > > > > Office:(575) 678-2004 DSN 258-2004
> > > > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
> > > > > (575)
> > > > > 678-1230 DSN 258-1230
> > > > > Email: john.w.raby2.civ at mail.mil
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED

CLASSIFICATION: UNCLASSIFIED

CLASSIFICATION: UNCLASSIFIED

------------------------------------------------
Subject: Request assistance with METViewer V3.1 install
From: reynaldo.a.armendarez.ctr at mail.mil
Time: Thu Oct 01 15:40:56 2020

CLASSIFICATION: UNCLASSIFIED

Tatiana,

Do you have any idea why tomcat-7.0.73 would work with R, but when I
upgrade to version tomcat-7.0.104, R suddenly stops functioning?

Thank you,

[cid:image004.png at 01D69724.630001D0]
Army Research Laboratory WSMR

Rey Armendarez
Linux System Administrator
Agile Defense Inc.
CTR. Email:
reynaldo.a.armendarez.ctr at mail.mil<mailto:reynaldo.a.armendarez.ctr at mail.mil>
C: 575-652-6862
Company Email: reynaldo.armendarez at agile-defense.com

   Create & Follow the Status of Your Tickets on ServiceNow!
   https://helpdesk.arl.army.mil/
   1-800-276-9602

-----Original Message-----
From: Tatiana Burek via RT <met_help at ucar.edu>
Sent: Thursday, October 1, 2020 2:31 PM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
<reynaldo.a.armendarez.ctr at mail.mil>
Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request assistance
with METViewer V3.1 install

All active links contained in this email were disabled.  Please verify
the identity of the sender, and confirm the authenticity of all links
contained within the message prior to copying and pasting the address
to a Web browser.

----

John,

You can find the list of new features and bug fixes for versions 3.0,
3.1_beta1 and 3.1 here:

Caution-http://dtcenter.ucar.edu/met/metviewer/doc/versions.html

All these versions are using R - Python is optional.

Tatiana

On Thu Oct 01 14:13:05 2020,
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil> wrote:

> CLASSIFICATION: UNCLASSIFIED

>

> Tatiana -

>

> Rey and I agree that that we will continue using the V2.11 version.
Is

> there any value to upgrading to V3.0 assuming that it still uses R
and

> not python?

>

> R/

> John

>

> -----Original Message-----

> From: Tatiana Burek via RT
<met_help at ucar.edu<mailto:met_help at ucar.edu>>

> Sent: Thursday, October 1, 2020 8:35 AM

> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>

>  Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)

>
<reynaldo.a.armendarez.ctr at mail.mil<mailto:reynaldo.a.armendarez.ctr at mail.mil>>

>  Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request
assistance

> with METViewer V3.1 install

>

> All active links contained in this email were disabled.  Please
verify

> the identity of the sender, and confirm the authenticity of all
links

> contained within the message prior to copying and pasting the
address

> to a Web browser.

>

>

>

>

> ----

>

> Hi John

>

> We are in the process of replacing R with Python. This is a long

> process and would take us a few releases before we complete this
task.

> v3.1 is the first attempt where we implemented and included

> Performance and Roc plots.

> At this

> point Python execution is optional and you still could use METviewer

> with R the same way as you using it now.

>

> If you are not planning to use METviewer Python you don't need to

> install Python 3.6 environment  at this moment but you will need it
in

> the future when METviewer Python would be a requirement.

> Let me know your decision and if you decide to go with Python I
could

> send you instructions on how to  install it.

>

> Tatiana

>

>

> On Tue Sep 29 16:53:58 2020,
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil> wrote:

> > Tatiana -

> >

> > Could you please assist us with the upgrade to METViewer V3.1? For

> > V2.11 you did share the .war and .tar files with METviewer

> > executables and the web app with us. I guess the first step is for

> > you to build

> > 3.1 for us and send us the files.

> >

> > Thanks.

> >

> > R/

> > John

> > ________________________________________

> > From: Tatiana Burek via RT [met_help at ucar.edu]

> > Sent: Tuesday, April 14, 2020 9:17 AM

> > To: Raby, John W CIV USARMY CCDC ARL (USA)

> > Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11

> > question (UNCLASSIFIED)

> >

> > All active links contained in this email were disabled.  Please

> > verify the identity of the sender, and confirm the authenticity of

> > all links contained within the message prior to copying and
pasting

> > the address to a Web browser.

> >

> >

> >

> >

> > ----

> >

> > Hi John,

> >

> > As I remember, I shared with you .war and .tar files with
METviewer

> > executables and the web app. I also gave you instructions where
and

> > how to install these files.

> > I can build METviewer 3.0 for you and you will install it the same

> > way as METviewer 2.11.  There is one more step you need to do for

> > this release. We updated the database schema and you need to
update

> > your databases to work with v 3.0. I will provide SQL script that

> > should take care of that. You just need to run it on all METviewer

> > databases.

> > Let me know if you would like to proceed with the update and I
will

> > sent files to you.

> >

> > Tatiana

> >

> > On Mon Apr 13 15:18:38 2020,
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil> wrote:

> > > CLASSIFICATION: UNCLASSIFIED

> > >

> > > Thanks, John.

> > >

> > > R/

> > > John

> > >

> > > -----Original Message-----

> > > From: John Halley Gotway via RT

> > > [Caution-Caution-Caution-mailto:met_help at ucar.edu]

> > > Sent: Monday, April 13, 2020 3:17 PM

> > > To: Raby, John W CIV USARMY CCDC ARL (USA)

> > > <john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>

> > >  Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]

> > > MetViewer

> > > v2.11

> > > question (UNCLASSIFIED)

> > >

> > > All active links contained in this email were disabled.  Please

> > > verify the identity of the sender, and confirm the authenticity
of

> > > all links contained within the message prior to copying and

> > > pasting the address to a Web browser.

> > >

> > >

> > >

> > >

> > > ----

> > >

> > > John,

> > >

> > > I just reassigned ownership of this ticket from me to Tatiana.

> > >

> > > Tatiana, please advise John Raby on how he can upgrade to

> > > METviewer

> > > 3.0 so he

> > > can make use of some of its enhancements.

> > >

> > > Thanks,

> > > John

> > >

> > > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <

> > > met_help at ucar.edu<mailto:met_help at ucar.edu>> wrote:

> > >

> > > >

> > > > <Caution-Caution-Caution-Caution-url:

> > > > Caution-Caution-

> > > > Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?i

> > > > d=94902 >

> > > >

> > > > CLASSIFICATION: UNCLASSIFIED

> > > >

> > > > John -

> > > >

> > > > My version is v2.11. What do you recommend as the best way to

> > > > upgrade?

> > > > Tatiana

> > > > worked with us to install the web interface version 2.11 on my

> > > > local linux workstation last July.

> > > >

> > > > R/

> > > > John

> > > >

> > > > -----Original Message-----

> > > > From: John Halley Gotway via RT [Caution-Caution-

> > > > Caution-Caution-mailto:met_help at ucar.edu]

> > > > Sent: Monday, April 13, 2020 1:51 PM

> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)

> > > > <john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>

> > > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]

> > > > MetViewer

> > > > v2.11

> > > > question (UNCLASSIFIED)

> > > >

> > > > All active links contained in this email were disabled.
Please

> > > > verify the identity of the sender, and confirm the
authenticity

> > > > of all links contained within the message prior to copying and

> > > > pasting the address to a Web browser.

> > > >

> > > >

> > > >

> > > >

> > > > ----

> > > >

> > > > John,

> > > >

> > > > Can you tell me what version of METviewer you're running?  It

> > > > should be listed in the top-left corner of the GUI window.

> > > > Plotting the TOTAL counts was actually a recent addition in

> > > > version 3.0.  Here's the GitHub issue which describes that

> > > > change:

> > > > Caution-Caution-Caution-

> > > > Caution-Caution-https://github.com/NCAR/METviewer/issues/170

> > > >

> > > > John

> > > >

> > > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <

> > > > met_help at ucar.edu<mailto:met_help at ucar.edu>> wrote:

> > > >

> > > > >

> > > > > <Caution-Caution-Caution-Caution-Caution-url:

> > > > > Caution-Caution-

> > > > > Caution-Caution-

> > > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?i

> > > > > d=94

> > > > > 902 >

> > > > >

> > > > > CLASSIFICATION: UNCLASSIFIED

> > > > >

> > > > > Thanks for getting me back on track. I loaded the db

> > > > > containing only .stat files and I looked for "TOTAL" in the

> > > > > list of dependent variables but it isn't there.

> > > > >

> > > > > R/

> > > > > John

> > > > >

> > > > > -----Original Message-----

> > > > > From: John Halley Gotway via RT

> > > > > [Caution-Caution-Caution-Caution-Caution-
mailto:met_help at ucar.

> > > > > edu]

> > > > > Sent: Monday, April 13, 2020 1:28 PM

> > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)

> > > > >
<john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>

> > > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]

> > > > > MetViewer

> > > > > v2.11 question (UNCLASSIFIED)

> > > > >

> > > > > All active links contained in this email were disabled.

> > > > > Please verify the identity of the sender, and confirm the

> > > > > authenticity of all links contained within the message prior

> > > > > to copying and pasting the address to a Web browser.

> > > > >

> > > > >

> > > > >

> > > > >

> > > > > ----

> > > > >

> > > > > John,

> > > > >

> > > > > METviewer only loads files ending in the ".stat" (for output

> > > > > for Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat)

> > > > > and files ending in "_obj.txt"

> > > > > for

> > > > > files from MODE and also the files that MTD creates.  It
does

> > > > > NOT load files ending in "_mpr.txt".

> > > > >

> > > > > To plot the number of matched pairs included in the

> > > > > computation of statistics, I'd recommend plotting the TOTAL

> > > > > column from the SL1L2, CNT, or CNT statistics line type...
as

> > > > > you've already found.

> > > > >

> > > > > John

> > > > >

> > > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT
<

> > > > > met_help at ucar.edu<mailto:met_help at ucar.edu>> wrote:

> > > > >

> > > > > >

> > > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.

> > > > > > Transaction: Ticket created by
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>

> > > > > >        Queue: met_help

> > > > > >      Subject: MetViewer v2.11 question (UNCLASSIFIED)

> > > > > >        Owner: Nobody

> > > > > >   Requestors:
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>

> > > > > >       Status: new

> > > > > >  Ticket <Caution-Caution-Caution-Caution-Caution-Caution-
url:

> > > > > > Caution-Caution-Caution-

> > > > > > Caution-Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.

> > > > > > html?id=94

> > > > > > 902 >

> > > > > >

> > > > > >

> > > > > > CLASSIFICATION: UNCLASSIFIED

> > > > > >

> > > > > > If I want to plot the number of observations (or matched

> > > > > > pairs) which were used to compute a given continuous error

> > > > > > statistic such as ME do I need to load the MPR.txt files
in

> > > > > > addition to the .stat files in the database or is there a

> > > > > > way to extract the value

> > > > > > (TOTAL) from the .stat files only. I reference the TOTAL

> > > > > > values  from the Point-Stat CNT.txt file which shows the

> > > > > > total number of matched pairs.

> > > > > >

> > > > > > I did an experiment by loading in one db, just .stat files

> > > > > > and in another db, I loaded the same .stat files and the

> > > > > > MPR.txt files together. In METViewer, when I load the db

> > > > > > with no MPR.txt files I do not see the attribute stat

> > > > > > "MPR_OBS"

> > > > > > available for selection.

> > > > > > When I load the db which includes both .stat and MPR.txt

> > > > > > files, I do see the attribute stat "MPR_OBS". When I plot

> > > > > > this stat, I see what appears to be a number count which,
I

> > > > > > believe, is the number of matched pairs or "TOTAL"

> > > > > >

> > > > > > R/

> > > > > > John

> > > > > >

> > > > > > Mr. John W. Raby

> > > > > > U.S. Army Research Laboratory White Sands Missile Range,
NM

> > > > > > 88002

> > > > > > Office:(575) 678-2004 DSN 258-2004

> > > > > > Teleworking: Contact Admin Specialist at (410) 278-6974
FAX

> > > > > > (575)

> > > > > > 678-1230 DSN 258-1230

> > > > > > Email:
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>

> > > > > >

> > > > > >

> > > > > > CLASSIFICATION: UNCLASSIFIED

> > > > > >

> > > > > >

> > > > >

> > > > > CLASSIFICATION: UNCLASSIFIED

> > > > >

> > > > >

> > > >

> > > > CLASSIFICATION: UNCLASSIFIED

> > > >

> > > >

> > >

> > > CLASSIFICATION: UNCLASSIFIED

>

>

>

> CLASSIFICATION: UNCLASSIFIED

CLASSIFICATION: UNCLASSIFIED

------------------------------------------------
Subject: Request assistance with METViewer V3.1 install
From: Tatiana Burek
Time: Fri Oct 02 07:37:59 2020

Hi Rey
Without knowing Tomcat directory tree and seeing the log messages It
is hard for me to find a problem.
A few questions that could help me:
By saying that R doesn't work do you mean that R command doesn't' work
or METviewer scripts produce errors?
Could you send me  error messages?
The old path to METviewer directory was:
/opt/tomcat7/webapps/metviewer
Is it different now?

Tatiana

On Thu Oct 01 15:40:56 2020, reynaldo.a.armendarez.ctr at mail.mil wrote:
> CLASSIFICATION: UNCLASSIFIED
>
>
>
> Tatiana,
>
>
>
> Do you have any idea why tomcat-7.0.73 would work with R, but when I
> upgrade to version tomcat-7.0.104, R suddenly stops functioning?
>
>
>
> Thank you,
>
>
>
>
> [cid:image004.png at 01D69724.630001D0]
> Army Research Laboratory WSMR
>
> Rey Armendarez
> Linux System Administrator
> Agile Defense Inc.
> CTR. Email:
>
reynaldo.a.armendarez.ctr at mail.mil<mailto:reynaldo.a.armendarez.ctr at mail.mil>
> C: 575-652-6862
> Company Email: reynaldo.armendarez at agile-defense.com
>
> Create & Follow the Status of Your Tickets on ServiceNow!
> https://helpdesk.arl.army.mil/
> 1-800-276-9602
>
>
>
>
>
>
>
> -----Original Message-----
> From: Tatiana Burek via RT <met_help at ucar.edu>
> Sent: Thursday, October 1, 2020 2:31 PM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
> Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
> <reynaldo.a.armendarez.ctr at mail.mil>
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request
assistance
> with METViewer V3.1 install
>
>
>
> All active links contained in this email were disabled.  Please
verify
> the identity of the sender, and confirm the authenticity of all
links
> contained within the message prior to copying and pasting the
address
> to a Web browser.
>
>
>
>
>
>
>
>
>
> ----
>
>
>
> John,
>
> You can find the list of new features and bug fixes for versions
3.0,
> 3.1_beta1 and 3.1 here:
>
> Caution-http://dtcenter.ucar.edu/met/metviewer/doc/versions.html
>
>
>
> All these versions are using R - Python is optional.
>
>
>
> Tatiana
>
>
>
> On Thu Oct 01 14:13:05 2020,
> john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil> wrote:
>
> > CLASSIFICATION: UNCLASSIFIED
>
> >
>
> > Tatiana -
>
> >
>
> > Rey and I agree that that we will continue using the V2.11
version.
> > Is
>
> > there any value to upgrading to V3.0 assuming that it still uses R
> > and
>
> > not python?
>
> >
>
> > R/
>
> > John
>
> >
>
> > -----Original Message-----
>
> > From: Tatiana Burek via RT
> > <met_help at ucar.edu<mailto:met_help at ucar.edu>>
>
> > Sent: Thursday, October 1, 2020 8:35 AM
>
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>
>
> > Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
>
> >
<reynaldo.a.armendarez.ctr at mail.mil<mailto:reynaldo.a.armendarez.ctr at mail.mil>>
>
> > Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request
assistance
>
> > with METViewer V3.1 install
>
> >
>
> > All active links contained in this email were disabled.  Please
> > verify
>
> > the identity of the sender, and confirm the authenticity of all
links
>
> > contained within the message prior to copying and pasting the
address
>
> > to a Web browser.
>
> >
>
> >
>
> >
>
> >
>
> > ----
>
> >
>
> > Hi John
>
> >
>
> > We are in the process of replacing R with Python. This is a long
>
> > process and would take us a few releases before we complete this
> > task.
>
> > v3.1 is the first attempt where we implemented and included
>
> > Performance and Roc plots.
>
> > At this
>
> > point Python execution is optional and you still could use
METviewer
>
> > with R the same way as you using it now.
>
> >
>
> > If you are not planning to use METviewer Python you don't need to
>
> > install Python 3.6 environment  at this moment but you will need
it
> > in
>
> > the future when METviewer Python would be a requirement.
>
> > Let me know your decision and if you decide to go with Python I
could
>
> > send you instructions on how to  install it.
>
> >
>
> > Tatiana
>
> >
>
> >
>
> > On Tue Sep 29 16:53:58 2020,
> > john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil> wrote:
>
> > > Tatiana -
>
> > >
>
> > > Could you please assist us with the upgrade to METViewer V3.1?
For
>
> > > V2.11 you did share the .war and .tar files with METviewer
>
> > > executables and the web app with us. I guess the first step is
for
>
> > > you to build
>
> > > 3.1 for us and send us the files.
>
> > >
>
> > > Thanks.
>
> > >
>
> > > R/
>
> > > John
>
> > > ________________________________________
>
> > > From: Tatiana Burek via RT [met_help at ucar.edu]
>
> > > Sent: Tuesday, April 14, 2020 9:17 AM
>
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
>
> > > Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer
v2.11
>
> > > question (UNCLASSIFIED)
>
> > >
>
> > > All active links contained in this email were disabled.  Please
>
> > > verify the identity of the sender, and confirm the authenticity
of
>
> > > all links contained within the message prior to copying and
pasting
>
> > > the address to a Web browser.
>
> > >
>
> > >
>
> > >
>
> > >
>
> > > ----
>
> > >
>
> > > Hi John,
>
> > >
>
> > > As I remember, I shared with you .war and .tar files with
METviewer
>
> > > executables and the web app. I also gave you instructions where
and
>
> > > how to install these files.
>
> > > I can build METviewer 3.0 for you and you will install it the
same
>
> > > way as METviewer 2.11.  There is one more step you need to do
for
>
> > > this release. We updated the database schema and you need to
update
>
> > > your databases to work with v 3.0. I will provide SQL script
that
>
> > > should take care of that. You just need to run it on all
METviewer
>
> > > databases.
>
> > > Let me know if you would like to proceed with the update and I
will
>
> > > sent files to you.
>
> > >
>
> > > Tatiana
>
> > >
>
> > > On Mon Apr 13 15:18:38 2020,
> > > john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>
wrote:
>
> > > > CLASSIFICATION: UNCLASSIFIED
>
> > > >
>
> > > > Thanks, John.
>
> > > >
>
> > > > R/
>
> > > > John
>
> > > >
>
> > > > -----Original Message-----
>
> > > > From: John Halley Gotway via RT
>
> > > > [Caution-Caution-Caution-mailto:met_help at ucar.edu]
>
> > > > Sent: Monday, April 13, 2020 3:17 PM
>
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
>
> > > > <john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>
>
> > > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
>
> > > > MetViewer
>
> > > > v2.11
>
> > > > question (UNCLASSIFIED)
>
> > > >
>
> > > > All active links contained in this email were disabled.
Please
>
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of
>
> > > > all links contained within the message prior to copying and
>
> > > > pasting the address to a Web browser.
>
> > > >
>
> > > >
>
> > > >
>
> > > >
>
> > > > ----
>
> > > >
>
> > > > John,
>
> > > >
>
> > > > I just reassigned ownership of this ticket from me to Tatiana.
>
> > > >
>
> > > > Tatiana, please advise John Raby on how he can upgrade to
>
> > > > METviewer
>
> > > > 3.0 so he
>
> > > > can make use of some of its enhancements.
>
> > > >
>
> > > > Thanks,
>
> > > > John
>
> > > >
>
> > > > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
>
> > > > met_help at ucar.edu<mailto:met_help at ucar.edu>> wrote:
>
> > > >
>
> > > > >
>
> > > > > <Caution-Caution-Caution-Caution-url:
>
> > > > > Caution-Caution-
>
> > > > > Caution-Caution-
> > > > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?i
>
> > > > > d=94902 >
>
> > > > >
>
> > > > > CLASSIFICATION: UNCLASSIFIED
>
> > > > >
>
> > > > > John -
>
> > > > >
>
> > > > > My version is v2.11. What do you recommend as the best way
to
>
> > > > > upgrade?
>
> > > > > Tatiana
>
> > > > > worked with us to install the web interface version 2.11 on
my
>
> > > > > local linux workstation last July.
>
> > > > >
>
> > > > > R/
>
> > > > > John
>
> > > > >
>
> > > > > -----Original Message-----
>
> > > > > From: John Halley Gotway via RT [Caution-Caution-
>
> > > > > Caution-Caution-mailto:met_help at ucar.edu]
>
> > > > > Sent: Monday, April 13, 2020 1:51 PM
>
> > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
>
> > > > >
<john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>
>
> > > > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
>
> > > > > MetViewer
>
> > > > > v2.11
>
> > > > > question (UNCLASSIFIED)
>
> > > > >
>
> > > > > All active links contained in this email were disabled.
Please
>
> > > > > verify the identity of the sender, and confirm the
authenticity
>
> > > > > of all links contained within the message prior to copying
and
>
> > > > > pasting the address to a Web browser.
>
> > > > >
>
> > > > >
>
> > > > >
>
> > > > >
>
> > > > > ----
>
> > > > >
>
> > > > > John,
>
> > > > >
>
> > > > > Can you tell me what version of METviewer you're running?
It
>
> > > > > should be listed in the top-left corner of the GUI window.
>
> > > > > Plotting the TOTAL counts was actually a recent addition in
>
> > > > > version 3.0.  Here's the GitHub issue which describes that
>
> > > > > change:
>
> > > > > Caution-Caution-Caution-
>
> > > > > Caution-Caution-https://github.com/NCAR/METviewer/issues/170
>
> > > > >
>
> > > > > John
>
> > > > >
>
> > > > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT
<
>
> > > > > met_help at ucar.edu<mailto:met_help at ucar.edu>> wrote:
>
> > > > >
>
> > > > > >
>
> > > > > > <Caution-Caution-Caution-Caution-Caution-url:
>
> > > > > > Caution-Caution-
>
> > > > > > Caution-Caution-
>
> > > > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?i
>
> > > > > > d=94
>
> > > > > > 902 >
>
> > > > > >
>
> > > > > > CLASSIFICATION: UNCLASSIFIED
>
> > > > > >
>
> > > > > > Thanks for getting me back on track. I loaded the db
>
> > > > > > containing only .stat files and I looked for "TOTAL" in
the
>
> > > > > > list of dependent variables but it isn't there.
>
> > > > > >
>
> > > > > > R/
>
> > > > > > John
>
> > > > > >
>
> > > > > > -----Original Message-----
>
> > > > > > From: John Halley Gotway via RT
>
> > > > > > [Caution-Caution-Caution-Caution-Caution-
> > > > > > mailto:met_help at ucar.
>
> > > > > > edu]
>
> > > > > > Sent: Monday, April 13, 2020 1:28 PM
>
> > > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
>
> > > > > >
<john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>
>
> > > > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
>
> > > > > > MetViewer
>
> > > > > > v2.11 question (UNCLASSIFIED)
>
> > > > > >
>
> > > > > > All active links contained in this email were disabled.
>
> > > > > > Please verify the identity of the sender, and confirm the
>
> > > > > > authenticity of all links contained within the message
prior
>
> > > > > > to copying and pasting the address to a Web browser.
>
> > > > > >
>
> > > > > >
>
> > > > > >
>
> > > > > >
>
> > > > > > ----
>
> > > > > >
>
> > > > > > John,
>
> > > > > >
>
> > > > > > METviewer only loads files ending in the ".stat" (for
output
>
> > > > > > for Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-
Stat)
>
> > > > > > and files ending in "_obj.txt"
>
> > > > > > for
>
> > > > > > files from MODE and also the files that MTD creates.  It
does
>
> > > > > > NOT load files ending in "_mpr.txt".
>
> > > > > >
>
> > > > > > To plot the number of matched pairs included in the
>
> > > > > > computation of statistics, I'd recommend plotting the
TOTAL
>
> > > > > > column from the SL1L2, CNT, or CNT statistics line type...
as
>
> > > > > > you've already found.
>
> > > > > >
>
> > > > > > John
>
> > > > > >
>
> > > > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via
RT
> > > > > > <
>
> > > > > > met_help at ucar.edu<mailto:met_help at ucar.edu>> wrote:
>
> > > > > >
>
> > > > > > >
>
> > > > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
>
> > > > > > > Transaction: Ticket created by
> > > > > > >
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>
>
> > > > > > > Queue: met_help
>
> > > > > > > Subject: MetViewer v2.11 question (UNCLASSIFIED)
>
> > > > > > > Owner: Nobody
>
> > > > > > > Requestors:
> > > > > > >
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>
>
> > > > > > > Status: new
>
> > > > > > > Ticket <Caution-Caution-Caution-Caution-Caution-Caution-
> > > > > > > url:
>
> > > > > > > Caution-Caution-Caution-
>
> > > > > > > Caution-Caution-Caution-
> > > > > > > https://rt.rap.ucar.edu/rt/Ticket/Display.
>
> > > > > > > html?id=94
>
> > > > > > > 902 >
>
> > > > > > >
>
> > > > > > >
>
> > > > > > > CLASSIFICATION: UNCLASSIFIED
>
> > > > > > >
>
> > > > > > > If I want to plot the number of observations (or matched
>
> > > > > > > pairs) which were used to compute a given continuous
error
>
> > > > > > > statistic such as ME do I need to load the MPR.txt files
in
>
> > > > > > > addition to the .stat files in the database or is there
a
>
> > > > > > > way to extract the value
>
> > > > > > > (TOTAL) from the .stat files only. I reference the TOTAL
>
> > > > > > > values  from the Point-Stat CNT.txt file which shows the
>
> > > > > > > total number of matched pairs.
>
> > > > > > >
>
> > > > > > > I did an experiment by loading in one db, just .stat
files
>
> > > > > > > and in another db, I loaded the same .stat files and the
>
> > > > > > > MPR.txt files together. In METViewer, when I load the db
>
> > > > > > > with no MPR.txt files I do not see the attribute stat
>
> > > > > > > "MPR_OBS"
>
> > > > > > > available for selection.
>
> > > > > > > When I load the db which includes both .stat and MPR.txt
>
> > > > > > > files, I do see the attribute stat "MPR_OBS". When I
plot
>
> > > > > > > this stat, I see what appears to be a number count
which, I
>
> > > > > > > believe, is the number of matched pairs or "TOTAL"
>
> > > > > > >
>
> > > > > > > R/
>
> > > > > > > John
>
> > > > > > >
>
> > > > > > > Mr. John W. Raby
>
> > > > > > > U.S. Army Research Laboratory White Sands Missile Range,
NM
>
> > > > > > > 88002
>
> > > > > > > Office:(575) 678-2004 DSN 258-2004
>
> > > > > > > Teleworking: Contact Admin Specialist at (410) 278-6974
FAX
>
> > > > > > > (575)
>
> > > > > > > 678-1230 DSN 258-1230
>
> > > > > > > Email:
> > > > > > >
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>
>
> > > > > > >
>
> > > > > > >
>
> > > > > > > CLASSIFICATION: UNCLASSIFIED
>
> > > > > > >
>
> > > > > > >
>
> > > > > >
>
> > > > > > CLASSIFICATION: UNCLASSIFIED
>
> > > > > >
>
> > > > > >
>
> > > > >
>
> > > > > CLASSIFICATION: UNCLASSIFIED
>
> > > > >
>
> > > > >
>
> > > >
>
> > > > CLASSIFICATION: UNCLASSIFIED
>
> >
>
> >
>
> >
>
> > CLASSIFICATION: UNCLASSIFIED
>
>
>
>
>
>
>
>
>
>
>
> CLASSIFICATION: UNCLASSIFIED

------------------------------------------------
Subject: Request assistance with METViewer V3.1 install
From: Tatiana Burek
Time: Tue Oct 13 12:24:22 2020

Rey,
Do you still have problems with the new Tomcat or it has been
resolved?

Tatiana

On Fri Oct 02 07:37:59 2020, tatiana wrote:
> Hi Rey
> Without knowing Tomcat directory tree and seeing the log messages It
> is hard for me to find a problem.
> A few questions that could help me:
> By saying that R doesn't work do you mean that R command doesn't'
work
> or METviewer scripts produce errors?
> Could you send me  error messages?
> The old path to METviewer directory was:
> /opt/tomcat7/webapps/metviewer
> Is it different now?
>
> Tatiana
>
> On Thu Oct 01 15:40:56 2020, reynaldo.a.armendarez.ctr at mail.mil
wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> >
> >
> > Tatiana,
> >
> >
> >
> > Do you have any idea why tomcat-7.0.73 would work with R, but when
I
> > upgrade to version tomcat-7.0.104, R suddenly stops functioning?
> >
> >
> >
> > Thank you,
> >
> >
> >
> >
> > [cid:image004.png at 01D69724.630001D0]
> > Army Research Laboratory WSMR
> >
> > Rey Armendarez
> > Linux System Administrator
> > Agile Defense Inc.
> > CTR. Email:
> >
reynaldo.a.armendarez.ctr at mail.mil<mailto:reynaldo.a.armendarez.ctr at mail.mil>
> > C: 575-652-6862
> > Company Email: reynaldo.armendarez at agile-defense.com
> >
> > Create & Follow the Status of Your Tickets on ServiceNow!
> > https://helpdesk.arl.army.mil/
> > 1-800-276-9602
> >
> >
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: Tatiana Burek via RT <met_help at ucar.edu>
> > Sent: Thursday, October 1, 2020 2:31 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> > Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
> > <reynaldo.a.armendarez.ctr at mail.mil>
> > Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request
assistance
> > with METViewer V3.1 install
> >
> >
> >
> > All active links contained in this email were disabled.  Please
> > verify
> > the identity of the sender, and confirm the authenticity of all
links
> > contained within the message prior to copying and pasting the
address
> > to a Web browser.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ----
> >
> >
> >
> > John,
> >
> > You can find the list of new features and bug fixes for versions
3.0,
> > 3.1_beta1 and 3.1 here:
> >
> > Caution-http://dtcenter.ucar.edu/met/metviewer/doc/versions.html
> >
> >
> >
> > All these versions are using R - Python is optional.
> >
> >
> >
> > Tatiana
> >
> >
> >
> > On Thu Oct 01 14:13:05 2020,
> > john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil> wrote:
> >
> > > CLASSIFICATION: UNCLASSIFIED
> >
> > >
> >
> > > Tatiana -
> >
> > >
> >
> > > Rey and I agree that that we will continue using the V2.11
version.
> > > Is
> >
> > > there any value to upgrading to V3.0 assuming that it still uses
R
> > > and
> >
> > > not python?
> >
> > >
> >
> > > R/
> >
> > > John
> >
> > >
> >
> > > -----Original Message-----
> >
> > > From: Tatiana Burek via RT
> > > <met_help at ucar.edu<mailto:met_help at ucar.edu>>
> >
> > > Sent: Thursday, October 1, 2020 8:35 AM
> >
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>
> >
> > > Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
> >
> > >
<reynaldo.a.armendarez.ctr at mail.mil<mailto:reynaldo.a.armendarez.ctr at mail.mil>>
> >
> > > Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request
> > > assistance
> >
> > > with METViewer V3.1 install
> >
> > >
> >
> > > All active links contained in this email were disabled.  Please
> > > verify
> >
> > > the identity of the sender, and confirm the authenticity of all
> > > links
> >
> > > contained within the message prior to copying and pasting the
> > > address
> >
> > > to a Web browser.
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > ----
> >
> > >
> >
> > > Hi John
> >
> > >
> >
> > > We are in the process of replacing R with Python. This is a long
> >
> > > process and would take us a few releases before we complete this
> > > task.
> >
> > > v3.1 is the first attempt where we implemented and included
> >
> > > Performance and Roc plots.
> >
> > > At this
> >
> > > point Python execution is optional and you still could use
> > > METviewer
> >
> > > with R the same way as you using it now.
> >
> > >
> >
> > > If you are not planning to use METviewer Python you don't need
to
> >
> > > install Python 3.6 environment  at this moment but you will need
it
> > > in
> >
> > > the future when METviewer Python would be a requirement.
> >
> > > Let me know your decision and if you decide to go with Python I
> > > could
> >
> > > send you instructions on how to  install it.
> >
> > >
> >
> > > Tatiana
> >
> > >
> >
> > >
> >
> > > On Tue Sep 29 16:53:58 2020,
> > > john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>
wrote:
> >
> > > > Tatiana -
> >
> > > >
> >
> > > > Could you please assist us with the upgrade to METViewer V3.1?
> > > > For
> >
> > > > V2.11 you did share the .war and .tar files with METviewer
> >
> > > > executables and the web app with us. I guess the first step is
> > > > for
> >
> > > > you to build
> >
> > > > 3.1 for us and send us the files.
> >
> > > >
> >
> > > > Thanks.
> >
> > > >
> >
> > > > R/
> >
> > > > John
> >
> > > > ________________________________________
> >
> > > > From: Tatiana Burek via RT [met_help at ucar.edu]
> >
> > > > Sent: Tuesday, April 14, 2020 9:17 AM
> >
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> >
> > > > Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer
> > > > v2.11
> >
> > > > question (UNCLASSIFIED)
> >
> > > >
> >
> > > > All active links contained in this email were disabled.
Please
> >
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of
> >
> > > > all links contained within the message prior to copying and
> > > > pasting
> >
> > > > the address to a Web browser.
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > ----
> >
> > > >
> >
> > > > Hi John,
> >
> > > >
> >
> > > > As I remember, I shared with you .war and .tar files with
> > > > METviewer
> >
> > > > executables and the web app. I also gave you instructions
where
> > > > and
> >
> > > > how to install these files.
> >
> > > > I can build METviewer 3.0 for you and you will install it the
> > > > same
> >
> > > > way as METviewer 2.11.  There is one more step you need to do
for
> >
> > > > this release. We updated the database schema and you need to
> > > > update
> >
> > > > your databases to work with v 3.0. I will provide SQL script
that
> >
> > > > should take care of that. You just need to run it on all
> > > > METviewer
> >
> > > > databases.
> >
> > > > Let me know if you would like to proceed with the update and I
> > > > will
> >
> > > > sent files to you.
> >
> > > >
> >
> > > > Tatiana
> >
> > > >
> >
> > > > On Mon Apr 13 15:18:38 2020,
> > > > john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>
> > > > wrote:
> >
> > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > >
> >
> > > > > Thanks, John.
> >
> > > > >
> >
> > > > > R/
> >
> > > > > John
> >
> > > > >
> >
> > > > > -----Original Message-----
> >
> > > > > From: John Halley Gotway via RT
> >
> > > > > [Caution-Caution-Caution-mailto:met_help at ucar.edu]
> >
> > > > > Sent: Monday, April 13, 2020 3:17 PM
> >
> > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> >
> > > > >
<john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>
> >
> > > > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> >
> > > > > MetViewer
> >
> > > > > v2.11
> >
> > > > > question (UNCLASSIFIED)
> >
> > > > >
> >
> > > > > All active links contained in this email were disabled.
Please
> >
> > > > > verify the identity of the sender, and confirm the
authenticity
> > > > > of
> >
> > > > > all links contained within the message prior to copying and
> >
> > > > > pasting the address to a Web browser.
> >
> > > > >
> >
> > > > >
> >
> > > > >
> >
> > > > >
> >
> > > > > ----
> >
> > > > >
> >
> > > > > John,
> >
> > > > >
> >
> > > > > I just reassigned ownership of this ticket from me to
Tatiana.
> >
> > > > >
> >
> > > > > Tatiana, please advise John Raby on how he can upgrade to
> >
> > > > > METviewer
> >
> > > > > 3.0 so he
> >
> > > > > can make use of some of its enhancements.
> >
> > > > >
> >
> > > > > Thanks,
> >
> > > > > John
> >
> > > > >
> >
> > > > > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT
<
> >
> > > > > met_help at ucar.edu<mailto:met_help at ucar.edu>> wrote:
> >
> > > > >
> >
> > > > > >
> >
> > > > > > <Caution-Caution-Caution-Caution-url:
> >
> > > > > > Caution-Caution-
> >
> > > > > > Caution-Caution-
> > > > > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?i
> >
> > > > > > d=94902 >
> >
> > > > > >
> >
> > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > >
> >
> > > > > > John -
> >
> > > > > >
> >
> > > > > > My version is v2.11. What do you recommend as the best way
to
> >
> > > > > > upgrade?
> >
> > > > > > Tatiana
> >
> > > > > > worked with us to install the web interface version 2.11
on
> > > > > > my
> >
> > > > > > local linux workstation last July.
> >
> > > > > >
> >
> > > > > > R/
> >
> > > > > > John
> >
> > > > > >
> >
> > > > > > -----Original Message-----
> >
> > > > > > From: John Halley Gotway via RT [Caution-Caution-
> >
> > > > > > Caution-Caution-mailto:met_help at ucar.edu]
> >
> > > > > > Sent: Monday, April 13, 2020 1:51 PM
> >
> > > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> >
> > > > > >
<john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>
> >
> > > > > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> >
> > > > > > MetViewer
> >
> > > > > > v2.11
> >
> > > > > > question (UNCLASSIFIED)
> >
> > > > > >
> >
> > > > > > All active links contained in this email were disabled.
> > > > > > Please
> >
> > > > > > verify the identity of the sender, and confirm the
> > > > > > authenticity
> >
> > > > > > of all links contained within the message prior to copying
> > > > > > and
> >
> > > > > > pasting the address to a Web browser.
> >
> > > > > >
> >
> > > > > >
> >
> > > > > >
> >
> > > > > >
> >
> > > > > > ----
> >
> > > > > >
> >
> > > > > > John,
> >
> > > > > >
> >
> > > > > > Can you tell me what version of METviewer you're running?
It
> >
> > > > > > should be listed in the top-left corner of the GUI window.
> >
> > > > > > Plotting the TOTAL counts was actually a recent addition
in
> >
> > > > > > version 3.0.  Here's the GitHub issue which describes that
> >
> > > > > > change:
> >
> > > > > > Caution-Caution-Caution-
> >
> > > > > > Caution-Caution-
https://github.com/NCAR/METviewer/issues/170
> >
> > > > > >
> >
> > > > > > John
> >
> > > > > >
> >
> > > > > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via
RT <
> >
> > > > > > met_help at ucar.edu<mailto:met_help at ucar.edu>> wrote:
> >
> > > > > >
> >
> > > > > > >
> >
> > > > > > > <Caution-Caution-Caution-Caution-Caution-url:
> >
> > > > > > > Caution-Caution-
> >
> > > > > > > Caution-Caution-
> >
> > > > > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?i
> >
> > > > > > > d=94
> >
> > > > > > > 902 >
> >
> > > > > > >
> >
> > > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > > >
> >
> > > > > > > Thanks for getting me back on track. I loaded the db
> >
> > > > > > > containing only .stat files and I looked for "TOTAL" in
the
> >
> > > > > > > list of dependent variables but it isn't there.
> >
> > > > > > >
> >
> > > > > > > R/
> >
> > > > > > > John
> >
> > > > > > >
> >
> > > > > > > -----Original Message-----
> >
> > > > > > > From: John Halley Gotway via RT
> >
> > > > > > > [Caution-Caution-Caution-Caution-Caution-
> > > > > > > mailto:met_help at ucar.
> >
> > > > > > > edu]
> >
> > > > > > > Sent: Monday, April 13, 2020 1:28 PM
> >
> > > > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> >
> > > > > > >
<john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>>
> >
> > > > > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> >
> > > > > > > MetViewer
> >
> > > > > > > v2.11 question (UNCLASSIFIED)
> >
> > > > > > >
> >
> > > > > > > All active links contained in this email were disabled.
> >
> > > > > > > Please verify the identity of the sender, and confirm
the
> >
> > > > > > > authenticity of all links contained within the message
> > > > > > > prior
> >
> > > > > > > to copying and pasting the address to a Web browser.
> >
> > > > > > >
> >
> > > > > > >
> >
> > > > > > >
> >
> > > > > > >
> >
> > > > > > > ----
> >
> > > > > > >
> >
> > > > > > > John,
> >
> > > > > > >
> >
> > > > > > > METviewer only loads files ending in the ".stat" (for
> > > > > > > output
> >
> > > > > > > for Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-
Stat)
> >
> > > > > > > and files ending in "_obj.txt"
> >
> > > > > > > for
> >
> > > > > > > files from MODE and also the files that MTD creates.  It
> > > > > > > does
> >
> > > > > > > NOT load files ending in "_mpr.txt".
> >
> > > > > > >
> >
> > > > > > > To plot the number of matched pairs included in the
> >
> > > > > > > computation of statistics, I'd recommend plotting the
TOTAL
> >
> > > > > > > column from the SL1L2, CNT, or CNT statistics line
type...
> > > > > > > as
> >
> > > > > > > you've already found.
> >
> > > > > > >
> >
> > > > > > > John
> >
> > > > > > >
> >
> > > > > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV
via
> > > > > > > RT
> > > > > > > <
> >
> > > > > > > met_help at ucar.edu<mailto:met_help at ucar.edu>> wrote:
> >
> > > > > > >
> >
> > > > > > > >
> >
> > > > > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted
upon.
> >
> > > > > > > > Transaction: Ticket created by
> > > > > > > >
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>
> >
> > > > > > > > Queue: met_help
> >
> > > > > > > > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> >
> > > > > > > > Owner: Nobody
> >
> > > > > > > > Requestors:
> > > > > > > >
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>
> >
> > > > > > > > Status: new
> >
> > > > > > > > Ticket <Caution-Caution-Caution-Caution-Caution-
Caution-
> > > > > > > > url:
> >
> > > > > > > > Caution-Caution-Caution-
> >
> > > > > > > > Caution-Caution-Caution-
> > > > > > > > https://rt.rap.ucar.edu/rt/Ticket/Display.
> >
> > > > > > > > html?id=94
> >
> > > > > > > > 902 >
> >
> > > > > > > >
> >
> > > > > > > >
> >
> > > > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > > > >
> >
> > > > > > > > If I want to plot the number of observations (or
matched
> >
> > > > > > > > pairs) which were used to compute a given continuous
> > > > > > > > error
> >
> > > > > > > > statistic such as ME do I need to load the MPR.txt
files
> > > > > > > > in
> >
> > > > > > > > addition to the .stat files in the database or is
there a
> >
> > > > > > > > way to extract the value
> >
> > > > > > > > (TOTAL) from the .stat files only. I reference the
TOTAL
> >
> > > > > > > > values  from the Point-Stat CNT.txt file which shows
the
> >
> > > > > > > > total number of matched pairs.
> >
> > > > > > > >
> >
> > > > > > > > I did an experiment by loading in one db, just .stat
> > > > > > > > files
> >
> > > > > > > > and in another db, I loaded the same .stat files and
the
> >
> > > > > > > > MPR.txt files together. In METViewer, when I load the
db
> >
> > > > > > > > with no MPR.txt files I do not see the attribute stat
> >
> > > > > > > > "MPR_OBS"
> >
> > > > > > > > available for selection.
> >
> > > > > > > > When I load the db which includes both .stat and
MPR.txt
> >
> > > > > > > > files, I do see the attribute stat "MPR_OBS". When I
plot
> >
> > > > > > > > this stat, I see what appears to be a number count
which,
> > > > > > > > I
> >
> > > > > > > > believe, is the number of matched pairs or "TOTAL"
> >
> > > > > > > >
> >
> > > > > > > > R/
> >
> > > > > > > > John
> >
> > > > > > > >
> >
> > > > > > > > Mr. John W. Raby
> >
> > > > > > > > U.S. Army Research Laboratory White Sands Missile
Range,
> > > > > > > > NM
> >
> > > > > > > > 88002
> >
> > > > > > > > Office:(575) 678-2004 DSN 258-2004
> >
> > > > > > > > Teleworking: Contact Admin Specialist at (410) 278-
6974
> > > > > > > > FAX
> >
> > > > > > > > (575)
> >
> > > > > > > > 678-1230 DSN 258-1230
> >
> > > > > > > > Email:
> > > > > > > >
john.w.raby2.civ at mail.mil<mailto:john.w.raby2.civ at mail.mil>
> >
> > > > > > > >
> >
> > > > > > > >
> >
> > > > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > > > >
> >
> > > > > > > >
> >
> > > > > > >
> >
> > > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > > >
> >
> > > > > > >
> >
> > > > > >
> >
> > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > >
> >
> > > > > >
> >
> > > > >
> >
> > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > >
> >
> > >
> >
> > >
> >
> > > CLASSIFICATION: UNCLASSIFIED
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > CLASSIFICATION: UNCLASSIFIED

------------------------------------------------
Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request assistance with METViewer V3.1 install (UNCLASSIFIED)
From: reynaldo.a.armendarez.ctr at mail.mil
Time: Tue Oct 13 13:43:06 2020

CLASSIFICATION: UNCLASSIFIED

This has been resolved. Thank you for following up.

-Rey

-----Original Message-----
From: Tatiana Burek via RT <met_help at ucar.edu>
Sent: Tuesday, October 13, 2020 12:24 PM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
<reynaldo.a.armendarez.ctr at mail.mil>
Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request assistance
with METViewer V3.1 install

All active links contained in this email were disabled.  Please verify
the identity of the sender, and confirm the authenticity of all links
contained within the message prior to copying and pasting the address
to a Web browser.

----

Rey,
Do you still have problems with the new Tomcat or it has been
resolved?

Tatiana

On Fri Oct 02 07:37:59 2020, tatiana wrote:
> Hi Rey
> Without knowing Tomcat directory tree and seeing the log messages It
> is hard for me to find a problem.
> A few questions that could help me:
> By saying that R doesn't work do you mean that R command doesn't'
work
> or METviewer scripts produce errors?
> Could you send me  error messages?
> The old path to METviewer directory was:
> /opt/tomcat7/webapps/metviewer
> Is it different now?
>
> Tatiana
>
> On Thu Oct 01 15:40:56 2020, reynaldo.a.armendarez.ctr at mail.mil
wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> >
> >
> > Tatiana,
> >
> >
> >
> > Do you have any idea why tomcat-7.0.73 would work with R, but when
I
> > upgrade to version tomcat-7.0.104, R suddenly stops functioning?
> >
> >
> >
> > Thank you,
> >
> >
> >
> >
> > [cid:image004.png at 01D69724.630001D0]
> > Army Research Laboratory WSMR
> >
> > Rey Armendarez
> > Linux System Administrator
> > Agile Defense Inc.
> > CTR. Email:
> > reynaldo.a.armendarez.ctr at mail.mil<Caution-
mailto:reynaldo.a.armenda
> > rez.ctr at mail.mil>
> > C: 575-652-6862
> > Company Email: reynaldo.armendarez at agile-defense.com
> >
> > Create & Follow the Status of Your Tickets on ServiceNow!
> > Caution-https://helpdesk.arl.army.mil/
> > 1-800-276-9602
> >
> >
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: Tatiana Burek via RT <met_help at ucar.edu>
> > Sent: Thursday, October 1, 2020 2:31 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> > Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
> > <reynaldo.a.armendarez.ctr at mail.mil>
> > Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request
> > assistance with METViewer V3.1 install
> >
> >
> >
> > All active links contained in this email were disabled.  Please
> > verify the identity of the sender, and confirm the authenticity of
> > all links contained within the message prior to copying and
pasting
> > the address to a Web browser.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ----
> >
> >
> >
> > John,
> >
> > You can find the list of new features and bug fixes for versions
> > 3.0,
> > 3.1_beta1 and 3.1 here:
> >
> > Caution-Caution-
http://dtcenter.ucar.edu/met/metviewer/doc/versions.
> > html
> >
> >
> >
> > All these versions are using R - Python is optional.
> >
> >
> >
> > Tatiana
> >
> >
> >
> > On Thu Oct 01 14:13:05 2020,
> > john.w.raby2.civ at mail.mil<Caution-
mailto:john.w.raby2.civ at mail.mil> wrote:
> >
> > > CLASSIFICATION: UNCLASSIFIED
> >
> > >
> >
> > > Tatiana -
> >
> > >
> >
> > > Rey and I agree that that we will continue using the V2.11
version.
> > > Is
> >
> > > there any value to upgrading to V3.0 assuming that it still uses
R
> > > and
> >
> > > not python?
> >
> > >
> >
> > > R/
> >
> > > John
> >
> > >
> >
> > > -----Original Message-----
> >
> > > From: Tatiana Burek via RT
> > > <met_help at ucar.edu<Caution-mailto:met_help at ucar.edu>>
> >
> > > Sent: Thursday, October 1, 2020 8:35 AM
> >
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil<Caution-
mailto:john.w.raby2.civ at mail.mi
> > > l>>
> >
> > > Cc: Armendarez, Reynaldo A Jr CTR USARMY CCDC ARL (USA)
> >
> > > <reynaldo.a.armendarez.ctr at mail.mil<Caution-
mailto:reynaldo.a.arme
> > > ndarez.ctr at mail.mil>>
> >
> > > Subject: [Non-DoD Source] [rt.rap.ucar.edu #96898] Request
> > > assistance
> >
> > > with METViewer V3.1 install
> >
> > >
> >
> > > All active links contained in this email were disabled.  Please
> > > verify
> >
> > > the identity of the sender, and confirm the authenticity of all
> > > links
> >
> > > contained within the message prior to copying and pasting the
> > > address
> >
> > > to a Web browser.
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > ----
> >
> > >
> >
> > > Hi John
> >
> > >
> >
> > > We are in the process of replacing R with Python. This is a long
> >
> > > process and would take us a few releases before we complete this
> > > task.
> >
> > > v3.1 is the first attempt where we implemented and included
> >
> > > Performance and Roc plots.
> >
> > > At this
> >
> > > point Python execution is optional and you still could use
> > > METviewer
> >
> > > with R the same way as you using it now.
> >
> > >
> >
> > > If you are not planning to use METviewer Python you don't need
to
> >
> > > install Python 3.6 environment  at this moment but you will need
> > > it in
> >
> > > the future when METviewer Python would be a requirement.
> >
> > > Let me know your decision and if you decide to go with Python I
> > > could
> >
> > > send you instructions on how to  install it.
> >
> > >
> >
> > > Tatiana
> >
> > >
> >
> > >
> >
> > > On Tue Sep 29 16:53:58 2020,
> > > john.w.raby2.civ at mail.mil<Caution-
mailto:john.w.raby2.civ at mail.mil> wrote:
> >
> > > > Tatiana -
> >
> > > >
> >
> > > > Could you please assist us with the upgrade to METViewer V3.1?
> > > > For
> >
> > > > V2.11 you did share the .war and .tar files with METviewer
> >
> > > > executables and the web app with us. I guess the first step is
> > > > for
> >
> > > > you to build
> >
> > > > 3.1 for us and send us the files.
> >
> > > >
> >
> > > > Thanks.
> >
> > > >
> >
> > > > R/
> >
> > > > John
> >
> > > > ________________________________________
> >
> > > > From: Tatiana Burek via RT [met_help at ucar.edu]
> >
> > > > Sent: Tuesday, April 14, 2020 9:17 AM
> >
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> >
> > > > Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer
> > > > v2.11
> >
> > > > question (UNCLASSIFIED)
> >
> > > >
> >
> > > > All active links contained in this email were disabled.
Please
> >
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of
> >
> > > > all links contained within the message prior to copying and
> > > > pasting
> >
> > > > the address to a Web browser.
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > ----
> >
> > > >
> >
> > > > Hi John,
> >
> > > >
> >
> > > > As I remember, I shared with you .war and .tar files with
> > > > METviewer
> >
> > > > executables and the web app. I also gave you instructions
where
> > > > and
> >
> > > > how to install these files.
> >
> > > > I can build METviewer 3.0 for you and you will install it the
> > > > same
> >
> > > > way as METviewer 2.11.  There is one more step you need to do
> > > > for
> >
> > > > this release. We updated the database schema and you need to
> > > > update
> >
> > > > your databases to work with v 3.0. I will provide SQL script
> > > > that
> >
> > > > should take care of that. You just need to run it on all
> > > > METviewer
> >
> > > > databases.
> >
> > > > Let me know if you would like to proceed with the update and I
> > > > will
> >
> > > > sent files to you.
> >
> > > >
> >
> > > > Tatiana
> >
> > > >
> >
> > > > On Mon Apr 13 15:18:38 2020,
> > > > john.w.raby2.civ at mail.mil<Caution-
mailto:john.w.raby2.civ at mail.m
> > > > il>
> > > > wrote:
> >
> > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > >
> >
> > > > > Thanks, John.
> >
> > > > >
> >
> > > > > R/
> >
> > > > > John
> >
> > > > >
> >
> > > > > -----Original Message-----
> >
> > > > > From: John Halley Gotway via RT
> >
> > > > > [Caution-Caution-Caution-Caution-mailto:met_help at ucar.edu]
> >
> > > > > Sent: Monday, April 13, 2020 3:17 PM
> >
> > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> >
> > > > > <john.w.raby2.civ at mail.mil<Caution-
mailto:john.w.raby2.civ at mai
> > > > > l.mil>>
> >
> > > > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> >
> > > > > MetViewer
> >
> > > > > v2.11
> >
> > > > > question (UNCLASSIFIED)
> >
> > > > >
> >
> > > > > All active links contained in this email were disabled.
> > > > > Please
> >
> > > > > verify the identity of the sender, and confirm the
> > > > > authenticity of
> >
> > > > > all links contained within the message prior to copying and
> >
> > > > > pasting the address to a Web browser.
> >
> > > > >
> >
> > > > >
> >
> > > > >
> >
> > > > >
> >
> > > > > ----
> >
> > > > >
> >
> > > > > John,
> >
> > > > >
> >
> > > > > I just reassigned ownership of this ticket from me to
Tatiana.
> >
> > > > >
> >
> > > > > Tatiana, please advise John Raby on how he can upgrade to
> >
> > > > > METviewer
> >
> > > > > 3.0 so he
> >
> > > > > can make use of some of its enhancements.
> >
> > > > >
> >
> > > > > Thanks,
> >
> > > > > John
> >
> > > > >
> >
> > > > > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT
<
> >
> > > > > met_help at ucar.edu<Caution-mailto:met_help at ucar.edu>> wrote:
> >
> > > > >
> >
> > > > > >
> >
> > > > > > <Caution-Caution-Caution-Caution-Caution-url:
> >
> > > > > > Caution-Caution-
> >
> > > > > > Caution-Caution-
> > > > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?i
> >
> > > > > > d=94902 >
> >
> > > > > >
> >
> > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > >
> >
> > > > > > John -
> >
> > > > > >
> >
> > > > > > My version is v2.11. What do you recommend as the best way
> > > > > > to
> >
> > > > > > upgrade?
> >
> > > > > > Tatiana
> >
> > > > > > worked with us to install the web interface version 2.11
on
> > > > > > my
> >
> > > > > > local linux workstation last July.
> >
> > > > > >
> >
> > > > > > R/
> >
> > > > > > John
> >
> > > > > >
> >
> > > > > > -----Original Message-----
> >
> > > > > > From: John Halley Gotway via RT [Caution-Caution-
> >
> > > > > > Caution-Caution-Caution-mailto:met_help at ucar.edu]
> >
> > > > > > Sent: Monday, April 13, 2020 1:51 PM
> >
> > > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> >
> > > > > > <john.w.raby2.civ at mail.mil<Caution-
mailto:john.w.raby2.civ at m
> > > > > > ail.mil>>
> >
> > > > > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> >
> > > > > > MetViewer
> >
> > > > > > v2.11
> >
> > > > > > question (UNCLASSIFIED)
> >
> > > > > >
> >
> > > > > > All active links contained in this email were disabled.
> > > > > > Please
> >
> > > > > > verify the identity of the sender, and confirm the
> > > > > > authenticity
> >
> > > > > > of all links contained within the message prior to copying
> > > > > > and
> >
> > > > > > pasting the address to a Web browser.
> >
> > > > > >
> >
> > > > > >
> >
> > > > > >
> >
> > > > > >
> >
> > > > > > ----
> >
> > > > > >
> >
> > > > > > John,
> >
> > > > > >
> >
> > > > > > Can you tell me what version of METviewer you're running?
> > > > > > It
> >
> > > > > > should be listed in the top-left corner of the GUI window.
> >
> > > > > > Plotting the TOTAL counts was actually a recent addition
in
> >
> > > > > > version 3.0.  Here's the GitHub issue which describes that
> >
> > > > > > change:
> >
> > > > > > Caution-Caution-Caution-
> >
> > > > > > Caution-Caution-Caution-
https://github.com/NCAR/METviewer/is
> > > > > > sues/170
> >
> > > > > >
> >
> > > > > > John
> >
> > > > > >
> >
> > > > > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via
RT
> > > > > > <
> >
> > > > > > met_help at ucar.edu<Caution-mailto:met_help at ucar.edu>>
wrote:
> >
> > > > > >
> >
> > > > > > >
> >
> > > > > > > <Caution-Caution-Caution-Caution-Caution-Caution-url:
> >
> > > > > > > Caution-Caution-
> >
> > > > > > > Caution-Caution-
> >
> > > > > > > Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > > > > html?i
> >
> > > > > > > d=94
> >
> > > > > > > 902 >
> >
> > > > > > >
> >
> > > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > > >
> >
> > > > > > > Thanks for getting me back on track. I loaded the db
> >
> > > > > > > containing only .stat files and I looked for "TOTAL" in
> > > > > > > the
> >
> > > > > > > list of dependent variables but it isn't there.
> >
> > > > > > >
> >
> > > > > > > R/
> >
> > > > > > > John
> >
> > > > > > >
> >
> > > > > > > -----Original Message-----
> >
> > > > > > > From: John Halley Gotway via RT
> >
> > > > > > > [Caution-Caution-Caution-Caution-Caution-
> > > > > > > Caution-mailto:met_help at ucar.
> >
> > > > > > > edu]
> >
> > > > > > > Sent: Monday, April 13, 2020 1:28 PM
> >
> > > > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> >
> > > > > > > <john.w.raby2.civ at mail.mil<Caution-
mailto:john.w.raby2.civ
> > > > > > > @mail.mil>>
> >
> > > > > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> >
> > > > > > > MetViewer
> >
> > > > > > > v2.11 question (UNCLASSIFIED)
> >
> > > > > > >
> >
> > > > > > > All active links contained in this email were disabled.
> >
> > > > > > > Please verify the identity of the sender, and confirm
the
> >
> > > > > > > authenticity of all links contained within the message
> > > > > > > prior
> >
> > > > > > > to copying and pasting the address to a Web browser.
> >
> > > > > > >
> >
> > > > > > >
> >
> > > > > > >
> >
> > > > > > >
> >
> > > > > > > ----
> >
> > > > > > >
> >
> > > > > > > John,
> >
> > > > > > >
> >
> > > > > > > METviewer only loads files ending in the ".stat" (for
> > > > > > > output
> >
> > > > > > > for Point-Stat, Grid-Stat, Ensemble-Stat, and
> > > > > > > Wavelet-Stat)
> >
> > > > > > > and files ending in "_obj.txt"
> >
> > > > > > > for
> >
> > > > > > > files from MODE and also the files that MTD creates.  It
> > > > > > > does
> >
> > > > > > > NOT load files ending in "_mpr.txt".
> >
> > > > > > >
> >
> > > > > > > To plot the number of matched pairs included in the
> >
> > > > > > > computation of statistics, I'd recommend plotting the
> > > > > > > TOTAL
> >
> > > > > > > column from the SL1L2, CNT, or CNT statistics line
type...
> > > > > > > as
> >
> > > > > > > you've already found.
> >
> > > > > > >
> >
> > > > > > > John
> >
> > > > > > >
> >
> > > > > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV
via
> > > > > > > RT <
> >
> > > > > > > met_help at ucar.edu<Caution-mailto:met_help at ucar.edu>>
wrote:
> >
> > > > > > >
> >
> > > > > > > >
> >
> > > > > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted
upon.
> >
> > > > > > > > Transaction: Ticket created by
> > > > > > > > john.w.raby2.civ at mail.mil<Caution-
mailto:john.w.raby2.ci
> > > > > > > > v at mail.mil>
> >
> > > > > > > > Queue: met_help
> >
> > > > > > > > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> >
> > > > > > > > Owner: Nobody
> >
> > > > > > > > Requestors:
> > > > > > > > john.w.raby2.civ at mail.mil<Caution-
mailto:john.w.raby2.ci
> > > > > > > > v at mail.mil>
> >
> > > > > > > > Status: new
> >
> > > > > > > > Ticket <Caution-Caution-Caution-Caution-Caution-
Caution-
> > > > > > > > Caution-url:
> >
> > > > > > > > Caution-Caution-Caution-
> >
> > > > > > > > Caution-Caution-Caution-
> > > > > > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> >
> > > > > > > > html?id=94
> >
> > > > > > > > 902 >
> >
> > > > > > > >
> >
> > > > > > > >
> >
> > > > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > > > >
> >
> > > > > > > > If I want to plot the number of observations (or
matched
> >
> > > > > > > > pairs) which were used to compute a given continuous
> > > > > > > > error
> >
> > > > > > > > statistic such as ME do I need to load the MPR.txt
files
> > > > > > > > in
> >
> > > > > > > > addition to the .stat files in the database or is
there
> > > > > > > > a
> >
> > > > > > > > way to extract the value
> >
> > > > > > > > (TOTAL) from the .stat files only. I reference the
TOTAL
> >
> > > > > > > > values  from the Point-Stat CNT.txt file which shows
the
> >
> > > > > > > > total number of matched pairs.
> >
> > > > > > > >
> >
> > > > > > > > I did an experiment by loading in one db, just .stat
> > > > > > > > files
> >
> > > > > > > > and in another db, I loaded the same .stat files and
the
> >
> > > > > > > > MPR.txt files together. In METViewer, when I load the
db
> >
> > > > > > > > with no MPR.txt files I do not see the attribute stat
> >
> > > > > > > > "MPR_OBS"
> >
> > > > > > > > available for selection.
> >
> > > > > > > > When I load the db which includes both .stat and
MPR.txt
> >
> > > > > > > > files, I do see the attribute stat "MPR_OBS". When I
> > > > > > > > plot
> >
> > > > > > > > this stat, I see what appears to be a number count
> > > > > > > > which, I
> >
> > > > > > > > believe, is the number of matched pairs or "TOTAL"
> >
> > > > > > > >
> >
> > > > > > > > R/
> >
> > > > > > > > John
> >
> > > > > > > >
> >
> > > > > > > > Mr. John W. Raby
> >
> > > > > > > > U.S. Army Research Laboratory White Sands Missile
Range,
> > > > > > > > NM
> >
> > > > > > > > 88002
> >
> > > > > > > > Office:(575) 678-2004 DSN 258-2004
> >
> > > > > > > > Teleworking: Contact Admin Specialist at (410) 278-
6974
> > > > > > > > FAX
> >
> > > > > > > > (575)
> >
> > > > > > > > 678-1230 DSN 258-1230
> >
> > > > > > > > Email:
> > > > > > > > john.w.raby2.civ at mail.mil<Caution-
mailto:john.w.raby2.ci
> > > > > > > > v at mail.mil>
> >
> > > > > > > >
> >
> > > > > > > >
> >
> > > > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > > > >
> >
> > > > > > > >
> >
> > > > > > >
> >
> > > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > > >
> >
> > > > > > >
> >
> > > > > >
> >
> > > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > > > > >
> >
> > > > > >
> >
> > > > >
> >
> > > > > CLASSIFICATION: UNCLASSIFIED
> >
> > >
> >
> > >
> >
> > >
> >
> > > CLASSIFICATION: UNCLASSIFIED
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > CLASSIFICATION: UNCLASSIFIED

CLASSIFICATION: UNCLASSIFIED

------------------------------------------------