[Met_help] [rt.rap.ucar.edu #95849] History for METViewer V2.11 issues (UNCLASSIFIED)
Tatiana Burek via RT
met_help at ucar.edu
Tue Oct 13 12:16:57 MDT 2020
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
CLASSIFICATION: UNCLASSIFIED
I loaded the .stat files into the DB for 3 different models which were
produced by Point-Stat. I used one fcst file and one obs file for each model
to run Point-Stat. I used the HiRA tool in Point-Stat and specified several
thresholds and neighborhood widths which successfully generated the RPS and
ECNT output files. On loading the .stat files into the DB, it flagged the
RPS line type as being unexpected. I successfully plotted the all PSTC
statistics (Y dep vrbl) which were available for 3 models (Y series vrbls)
for several interp_points and for several fcst_thresh values (ind vrbls).
The issues which resulted in "No image available" were as follows:
1. Can plot RMSE Y dep vrbl (summary statistic) for one lead time
(ind vrbl), but when I try plotting for several interp_pnts (ind vrbl) it
only plots the RMSE for 4 interp points and no others despite selecting them
all. All interp_points values were listed along the x-axis of the plot.
2. Unable to plot the summary stat ECNT_RMSE (Y dep vrbl) for one
lead time (ind vrbl) for several interp_pnts and fcst_thresh values
3. Ditto the results in #2 for all ECNT statistics.
4. Unable to plot RPS statistics as they did not load (unexpected
statistic)
Do you have any suggestions for things to look for in setting up the plot
which I might have overlooked and which might have caused the above issues?
Thanks.
R/
John
Mr. John W. Raby
U.S. Army Research Laboratory
White Sands Missile Range, NM 88002
Office:(575) 678-2004 DSN 258-2004
Teleworking: Contact Admin Specialist at (410) 278-6974
FAX (575) 678-1230 DSN 258-1230
Email: john.w.raby2.civ at mail.mil
CLASSIFICATION: UNCLASSIFIED
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: METViewer V2.11 issues (UNCLASSIFIED)
From: Tatiana Burek
Time: Thu Jul 09 07:58:39 2020
Hi John,
#4 We start support RPS line type in METviewer starting from v3.0. You
need to update your METviewer instance in order to use it.
#1. It is difficult for me to explain why METviwer doesn't plot all
interp_pnts without seeing the data.The simple explanation - you
probably don't have any data to display.
#2,3. All stats that start from ECNT_ can only be plotted as an
aggregation of lines. It means you need to select Aggregation
statistics -> Ensemble Continuous Statistics (ECNT). Also to calculate
this stat you need data in ECNT table ( ECNT line type).
Tatiana
On Wed Jul 08 10:27:47 2020, john.w.raby2.civ at mail.mil wrote:
> CLASSIFICATION: UNCLASSIFIED
>
> I loaded the .stat files into the DB for 3 different models which
were
> produced by Point-Stat. I used one fcst file and one obs file for
each model
> to run Point-Stat. I used the HiRA tool in Point-Stat and specified
several
> thresholds and neighborhood widths which successfully generated the
RPS and
> ECNT output files. On loading the .stat files into the DB, it
flagged the
> RPS line type as being unexpected. I successfully plotted the all
PSTC
> statistics (Y dep vrbl) which were available for 3 models (Y series
vrbls)
> for several interp_points and for several fcst_thresh values (ind
vrbls).
> The issues which resulted in "No image available" were as follows:
>
> 1. Can plot RMSE Y dep vrbl (summary statistic) for one lead time
> (ind vrbl), but when I try plotting for several interp_pnts (ind
vrbl) it
> only plots the RMSE for 4 interp points and no others despite
selecting them
> all. All interp_points values were listed along the x-axis of the
plot.
> 2. Unable to plot the summary stat ECNT_RMSE (Y dep vrbl) for one
> lead time (ind vrbl) for several interp_pnts and fcst_thresh values
> 3. Ditto the results in #2 for all ECNT statistics.
> 4. Unable to plot RPS statistics as they did not load (unexpected
> statistic)
>
> Do you have any suggestions for things to look for in setting up the
plot
> which I might have overlooked and which might have caused the above
issues?
>
> Thanks.
>
> R/
> John
>
> Mr. John W. Raby
> U.S. Army Research Laboratory
> White Sands Missile Range, NM 88002
> Office:(575) 678-2004 DSN 258-2004
> Teleworking: Contact Admin Specialist at (410) 278-6974
> FAX (575) 678-1230 DSN 258-1230
> Email: john.w.raby2.civ at mail.mil
>
> CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11 issues (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Thu Jul 09 08:36:05 2020
Tatiana -
Thanks for your inputs on the possible causes for the issues.
I certainly plan to upgrade METViewer, but will wait until the work
situation for my system admin person and myself returns to normal.
For #1, yours is a valid point (no RMSE data). I will look in the
.stat file to see if the only RMSE data I had was for interp_pnts = 4
For #2,3, I checked the .stat file and it contains the ECNT line type.
I'll retry the plot using Aggregation statistics per your suggestion.
R/
John
________________________________________
From: Tatiana Burek via RT [met_help at ucar.edu]
Sent: Thursday, July 09, 2020 7:58 AM
To: Raby, John W CIV USARMY CCDC ARL (USA)
Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
issues (UNCLASSIFIED)
Hi John,
#4 We start support RPS line type in METviewer starting from v3.0. You
need to update your METviewer instance in order to use it.
#1. It is difficult for me to explain why METviwer doesn't plot all
interp_pnts without seeing the data.The simple explanation - you
probably don't have any data to display.
#2,3. All stats that start from ECNT_ can only be plotted as an
aggregation of lines. It means you need to select Aggregation
statistics -> Ensemble Continuous Statistics (ECNT). Also to calculate
this stat you need data in ECNT table ( ECNT line type).
Tatiana
On Wed Jul 08 10:27:47 2020, john.w.raby2.civ at mail.mil wrote:
> CLASSIFICATION: UNCLASSIFIED
>
> I loaded the .stat files into the DB for 3 different models which
were
> produced by Point-Stat. I used one fcst file and one obs file for
each model
> to run Point-Stat. I used the HiRA tool in Point-Stat and specified
several
> thresholds and neighborhood widths which successfully generated the
RPS and
> ECNT output files. On loading the .stat files into the DB, it
flagged the
> RPS line type as being unexpected. I successfully plotted the all
PSTC
> statistics (Y dep vrbl) which were available for 3 models (Y series
vrbls)
> for several interp_points and for several fcst_thresh values (ind
vrbls).
> The issues which resulted in "No image available" were as follows:
>
> 1. Can plot RMSE Y dep vrbl (summary statistic) for one lead
time
> (ind vrbl), but when I try plotting for several interp_pnts (ind
vrbl) it
> only plots the RMSE for 4 interp points and no others despite
selecting them
> all. All interp_points values were listed along the x-axis of the
plot.
> 2. Unable to plot the summary stat ECNT_RMSE (Y dep vrbl) for
one
> lead time (ind vrbl) for several interp_pnts and fcst_thresh values
> 3. Ditto the results in #2 for all ECNT statistics.
> 4. Unable to plot RPS statistics as they did not load
(unexpected
> statistic)
>
> Do you have any suggestions for things to look for in setting up the
plot
> which I might have overlooked and which might have caused the above
issues?
>
> Thanks.
>
> R/
> John
>
> Mr. John W. Raby
> U.S. Army Research Laboratory
> White Sands Missile Range, NM 88002
> Office:(575) 678-2004 DSN 258-2004
> Teleworking: Contact Admin Specialist at (410) 278-6974
> FAX (575) 678-1230 DSN 258-1230
> Email: john.w.raby2.civ at mail.mil
>
> CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: METViewer V2.11 issues (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Tue Jul 14 16:51:12 2020
Tatiana -
Sorry for the delay in getting back to you on the results of my
testing. I tried to plot ECNT_RMSE using aggregation of the ECNT line
type vice summary statistics. I tried to plot ECNT_RMSE as a function
of interp_points for 3 different models but I'm getting "no image
available" with a pop-up which shows a plot filename. See attached
image. I exported the plot XML which is also attached. I looked at the
.stat file and it contains the ECNT line type.
R/
John
________________________________________
From: Raby, John W CIV USARMY CCDC ARL (USA)
Sent: Thursday, July 09, 2020 8:30 AM
To: met_help at ucar.edu
Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
issues (UNCLASSIFIED)
Tatiana -
Thanks for your inputs on the possible causes for the issues.
I certainly plan to upgrade METViewer, but will wait until the work
situation for my system admin person and myself returns to normal.
For #1, yours is a valid point (no RMSE data). I will look in the
.stat file to see if the only RMSE data I had was for interp_pnts = 4
For #2,3, I checked the .stat file and it contains the ECNT line type.
I'll retry the plot using Aggregation statistics per your suggestion.
R/
John
________________________________________
From: Tatiana Burek via RT [met_help at ucar.edu]
Sent: Thursday, July 09, 2020 7:58 AM
To: Raby, John W CIV USARMY CCDC ARL (USA)
Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
issues (UNCLASSIFIED)
Hi John,
#4 We start support RPS line type in METviewer starting from v3.0. You
need to update your METviewer instance in order to use it.
#1. It is difficult for me to explain why METviwer doesn't plot all
interp_pnts without seeing the data.The simple explanation - you
probably don't have any data to display.
#2,3. All stats that start from ECNT_ can only be plotted as an
aggregation of lines. It means you need to select Aggregation
statistics -> Ensemble Continuous Statistics (ECNT). Also to calculate
this stat you need data in ECNT table ( ECNT line type).
Tatiana
On Wed Jul 08 10:27:47 2020, john.w.raby2.civ at mail.mil wrote:
> CLASSIFICATION: UNCLASSIFIED
>
> I loaded the .stat files into the DB for 3 different models which
were
> produced by Point-Stat. I used one fcst file and one obs file for
each model
> to run Point-Stat. I used the HiRA tool in Point-Stat and specified
several
> thresholds and neighborhood widths which successfully generated the
RPS and
> ECNT output files. On loading the .stat files into the DB, it
flagged the
> RPS line type as being unexpected. I successfully plotted the all
PSTC
> statistics (Y dep vrbl) which were available for 3 models (Y series
vrbls)
> for several interp_points and for several fcst_thresh values (ind
vrbls).
> The issues which resulted in "No image available" were as follows:
>
> 1. Can plot RMSE Y dep vrbl (summary statistic) for one lead
time
> (ind vrbl), but when I try plotting for several interp_pnts (ind
vrbl) it
> only plots the RMSE for 4 interp points and no others despite
selecting them
> all. All interp_points values were listed along the x-axis of the
plot.
> 2. Unable to plot the summary stat ECNT_RMSE (Y dep vrbl) for
one
> lead time (ind vrbl) for several interp_pnts and fcst_thresh values
> 3. Ditto the results in #2 for all ECNT statistics.
> 4. Unable to plot RPS statistics as they did not load
(unexpected
> statistic)
>
> Do you have any suggestions for things to look for in setting up the
plot
> which I might have overlooked and which might have caused the above
issues?
>
> Thanks.
>
> R/
> John
>
> Mr. John W. Raby
> U.S. Army Research Laboratory
> White Sands Missile Range, NM 88002
> Office:(575) 678-2004 DSN 258-2004
> Teleworking: Contact Admin Specialist at (410) 278-6974
> FAX (575) 678-1230 DSN 258-1230
> Email: john.w.raby2.civ at mail.mil
>
> CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: METViewer V2.11 issues (UNCLASSIFIED)
From: Tatiana Burek
Time: Wed Jul 15 11:54:31 2020
Hi John
I still think that you don't have data in the database.
Could you run a plot one more time and when it is done look at the log
messages in the 'Log' tab.
Or if you have an access to the server's file system, find a file with
the messages:
/opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.log
Could you send this output to me?
Can you access the data in your database?
mysql -u <user_name> -p <pwd> mv_HiRA
If you do, could you get MySQl query from 'SQL' tab or from file:
/opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.sql
and run this query in the console.
Do you get data?
Tatiana
On Tue Jul 14 16:51:12 2020, john.w.raby2.civ at mail.mil wrote:
> Tatiana -
>
> Sorry for the delay in getting back to you on the results of my
> testing. I tried to plot ECNT_RMSE using aggregation of the ECNT
line
> type vice summary statistics. I tried to plot ECNT_RMSE as a
function
> of interp_points for 3 different models but I'm getting "no image
> available" with a pop-up which shows a plot filename. See attached
> image. I exported the plot XML which is also attached. I looked at
the
> .stat file and it contains the ECNT line type.
>
> R/
> John
> ________________________________________
> From: Raby, John W CIV USARMY CCDC ARL (USA)
> Sent: Thursday, July 09, 2020 8:30 AM
> To: met_help at ucar.edu
> Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer
V2.11
> issues (UNCLASSIFIED)
>
> Tatiana -
>
> Thanks for your inputs on the possible causes for the issues.
>
> I certainly plan to upgrade METViewer, but will wait until the work
> situation for my system admin person and myself returns to normal.
>
> For #1, yours is a valid point (no RMSE data). I will look in the
> .stat file to see if the only RMSE data I had was for interp_pnts =
4
>
> For #2,3, I checked the .stat file and it contains the ECNT line
type.
> I'll retry the plot using Aggregation statistics per your
suggestion.
>
> R/
> John
> ________________________________________
> From: Tatiana Burek via RT [met_help at ucar.edu]
> Sent: Thursday, July 09, 2020 7:58 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
> issues (UNCLASSIFIED)
>
> Hi John,
> #4 We start support RPS line type in METviewer starting from v3.0.
You
> need to update your METviewer instance in order to use it.
>
> #1. It is difficult for me to explain why METviwer doesn't plot all
> interp_pnts without seeing the data.The simple explanation - you
> probably don't have any data to display.
>
> #2,3. All stats that start from ECNT_ can only be plotted as an
> aggregation of lines. It means you need to select Aggregation
> statistics -> Ensemble Continuous Statistics (ECNT). Also to
calculate
> this stat you need data in ECNT table ( ECNT line type).
>
> Tatiana
>
> On Wed Jul 08 10:27:47 2020, john.w.raby2.civ at mail.mil wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> > I loaded the .stat files into the DB for 3 different models which
> > were
> > produced by Point-Stat. I used one fcst file and one obs file for
> > each model
> > to run Point-Stat. I used the HiRA tool in Point-Stat and
specified
> > several
> > thresholds and neighborhood widths which successfully generated
the
> > RPS and
> > ECNT output files. On loading the .stat files into the DB, it
flagged
> > the
> > RPS line type as being unexpected. I successfully plotted the all
> > PSTC
> > statistics (Y dep vrbl) which were available for 3 models (Y
series
> > vrbls)
> > for several interp_points and for several fcst_thresh values (ind
> > vrbls).
> > The issues which resulted in "No image available" were as follows:
> >
> > 1. Can plot RMSE Y dep vrbl (summary statistic) for one lead time
> > (ind vrbl), but when I try plotting for several interp_pnts (ind
> > vrbl) it
> > only plots the RMSE for 4 interp points and no others despite
> > selecting them
> > all. All interp_points values were listed along the x-axis of the
> > plot.
> > 2. Unable to plot the summary stat ECNT_RMSE (Y dep vrbl) for one
> > lead time (ind vrbl) for several interp_pnts and fcst_thresh
values
> > 3. Ditto the results in #2 for all ECNT statistics.
> > 4. Unable to plot RPS statistics as they did not load (unexpected
> > statistic)
> >
> > Do you have any suggestions for things to look for in setting up
the
> > plot
> > which I might have overlooked and which might have caused the
above
> > issues?
> >
> > Thanks.
> >
> > R/
> > John
> >
> > Mr. John W. Raby
> > U.S. Army Research Laboratory
> > White Sands Missile Range, NM 88002
> > Office:(575) 678-2004 DSN 258-2004
> > Teleworking: Contact Admin Specialist at (410) 278-6974
> > FAX (575) 678-1230 DSN 258-1230
> > Email: john.w.raby2.civ at mail.mil
> >
> > CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: METViewer V2.11 issues (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Wed Jul 15 12:36:30 2020
Tatiana -
I've attached the log file was generated after I regenerated the plot.
When I accessed the mv_HiRA database, I received a lot of screen
dialog. See attached text file.
Used the MySQL query obtained from the SQL tab which generated the
response in the attached txt file.
R/
John
________________________________________
From: Tatiana Burek via RT [met_help at ucar.edu]
Sent: Wednesday, July 15, 2020 11:54 AM
To: Raby, John W CIV USARMY CCDC ARL (USA)
Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
issues (UNCLASSIFIED)
Hi John
I still think that you don't have data in the database.
Could you run a plot one more time and when it is done look at the log
messages in the 'Log' tab.
Or if you have an access to the server's file system, find a file with
the messages:
/opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.log
Could you send this output to me?
Can you access the data in your database?
mysql -u <user_name> -p <pwd> mv_HiRA
If you do, could you get MySQl query from 'SQL' tab or from file:
/opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.sql
and run this query in the console.
Do you get data?
Tatiana
On Tue Jul 14 16:51:12 2020, john.w.raby2.civ at mail.mil wrote:
> Tatiana -
>
> Sorry for the delay in getting back to you on the results of my
> testing. I tried to plot ECNT_RMSE using aggregation of the ECNT
line
> type vice summary statistics. I tried to plot ECNT_RMSE as a
function
> of interp_points for 3 different models but I'm getting "no image
> available" with a pop-up which shows a plot filename. See attached
> image. I exported the plot XML which is also attached. I looked at
the
> .stat file and it contains the ECNT line type.
>
> R/
> John
> ________________________________________
> From: Raby, John W CIV USARMY CCDC ARL (USA)
> Sent: Thursday, July 09, 2020 8:30 AM
> To: met_help at ucar.edu
> Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer
V2.11
> issues (UNCLASSIFIED)
>
> Tatiana -
>
> Thanks for your inputs on the possible causes for the issues.
>
> I certainly plan to upgrade METViewer, but will wait until the work
> situation for my system admin person and myself returns to normal.
>
> For #1, yours is a valid point (no RMSE data). I will look in the
> .stat file to see if the only RMSE data I had was for interp_pnts =
4
>
> For #2,3, I checked the .stat file and it contains the ECNT line
type.
> I'll retry the plot using Aggregation statistics per your
suggestion.
>
> R/
> John
> ________________________________________
> From: Tatiana Burek via RT [met_help at ucar.edu]
> Sent: Thursday, July 09, 2020 7:58 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
> issues (UNCLASSIFIED)
>
> Hi John,
> #4 We start support RPS line type in METviewer starting from v3.0.
You
> need to update your METviewer instance in order to use it.
>
> #1. It is difficult for me to explain why METviwer doesn't plot all
> interp_pnts without seeing the data.The simple explanation - you
> probably don't have any data to display.
>
> #2,3. All stats that start from ECNT_ can only be plotted as an
> aggregation of lines. It means you need to select Aggregation
> statistics -> Ensemble Continuous Statistics (ECNT). Also to
calculate
> this stat you need data in ECNT table ( ECNT line type).
>
> Tatiana
>
> On Wed Jul 08 10:27:47 2020, john.w.raby2.civ at mail.mil wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> > I loaded the .stat files into the DB for 3 different models which
> > were
> > produced by Point-Stat. I used one fcst file and one obs file for
> > each model
> > to run Point-Stat. I used the HiRA tool in Point-Stat and
specified
> > several
> > thresholds and neighborhood widths which successfully generated
the
> > RPS and
> > ECNT output files. On loading the .stat files into the DB, it
flagged
> > the
> > RPS line type as being unexpected. I successfully plotted the all
> > PSTC
> > statistics (Y dep vrbl) which were available for 3 models (Y
series
> > vrbls)
> > for several interp_points and for several fcst_thresh values (ind
> > vrbls).
> > The issues which resulted in "No image available" were as follows:
> >
> > 1. Can plot RMSE Y dep vrbl (summary statistic) for one lead time
> > (ind vrbl), but when I try plotting for several interp_pnts (ind
> > vrbl) it
> > only plots the RMSE for 4 interp points and no others despite
> > selecting them
> > all. All interp_points values were listed along the x-axis of the
> > plot.
> > 2. Unable to plot the summary stat ECNT_RMSE (Y dep vrbl) for one
> > lead time (ind vrbl) for several interp_pnts and fcst_thresh
values
> > 3. Ditto the results in #2 for all ECNT statistics.
> > 4. Unable to plot RPS statistics as they did not load (unexpected
> > statistic)
> >
> > Do you have any suggestions for things to look for in setting up
the
> > plot
> > which I might have overlooked and which might have caused the
above
> > issues?
> >
> > Thanks.
> >
> > R/
> > John
> >
> > Mr. John W. Raby
> > U.S. Army Research Laboratory
> > White Sands Missile Range, NM 88002
> > Office:(575) 678-2004 DSN 258-2004
> > Teleworking: Contact Admin Specialist at (410) 278-6974
> > FAX (575) 678-1230 DSN 258-1230
> > Email: john.w.raby2.civ at mail.mil
> >
> > CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: METViewer V2.11 issues (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Wed Jul 15 12:36:30 2020
mysql Ver 15.1 Distrib 5.5.65-MariaDB, for Linux (x86_64) using
readline 5.1
Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.
Usage: mysql [OPTIONS] [database]
Default options are read from the following files in the given order:
/etc/mysql/my.cnf /etc/my.cnf ~/.my.cnf
The following groups are read: mysql client client-server client-
mariadb
The following options may be given as the first argument:
--print-defaults Print the program argument list and exit.
--no-defaults Don't read default options from any option
file.
The following specify which files/extra groups are read (specified
before remaining options):
--defaults-file=# Only read default options from the given
file #.
--defaults-extra-file=# Read this file after the global files are
read.
--defaults-group-suffix=# Additionally read default groups with #
appended as a suffix.
-?, --help Display this help and exit.
-I, --help Synonym for -?
--abort-source-on-error
Abort 'source filename' operations in case of
errors
--auto-rehash Enable automatic rehashing. One doesn't need to
use
'rehash' to get table and field completion, but
startup
and reconnecting may take a longer time. Disable
with
--disable-auto-rehash.
(Defaults to on; use --skip-auto-rehash to
disable.)
-A, --no-auto-rehash
No automatic rehashing. One has to use 'rehash'
to get
table and field completion. This gives a quicker
start of
mysql and disables rehashing on reconnect.
--auto-vertical-output
Automatically switch to vertical output mode if
the
result is wider than the terminal width.
-B, --batch Don't use history file. Disable interactive
behavior.
(Enables --silent.)
--binary-as-hex Print binary data as hex
--character-sets-dir=name
Directory for character set files.
--column-type-info Display column type information.
-c, --comments Preserve comments. Send comments to the server.
The
default is --skip-comments (discard comments),
enable
with --comments.
-C, --compress Use compression in server/client protocol.
-#, --debug[=#] This is a non-debug version. Catch this and
exit.
--debug-check Check memory and open file usage at exit.
-T, --debug-info Print some debug info at exit.
-D, --database=name Database to use.
--default-character-set=name
Set the default character set.
--delimiter=name Delimiter to be used.
-e, --execute=name Execute command and quit. (Disables --force and
history
file.)
-E, --vertical Print the output of a query (rows) vertically.
-f, --force Continue even if we get an SQL error. Sets
abort-source-on-error to 0
-G, --named-commands
Enable named commands. Named commands mean this
program's
internal commands; see mysql> help . When
enabled, the
named commands can be used from any line of the
query,
otherwise only from the first line, before an
enter.
Disable with --disable-named-commands. This
option is
disabled by default.
-i, --ignore-spaces Ignore space after function names.
--init-command=name SQL Command to execute when connecting to MySQL
server.
Will automatically be re-executed when
reconnecting.
--local-infile Enable/disable LOAD DATA LOCAL INFILE.
-b, --no-beep Turn off beep on error.
-h, --host=name Connect to host.
-H, --html Produce HTML output.
-X, --xml Produce XML output.
--line-numbers Write line numbers for errors.
(Defaults to on; use --skip-line-numbers to
disable.)
-L, --skip-line-numbers
Don't write line number for errors.
-n, --unbuffered Flush buffer after each query.
--column-names Write column names in results.
(Defaults to on; use --skip-column-names to
disable.)
-N, --skip-column-names
Don't write column names in results.
--sigint-ignore Ignore SIGINT (CTRL-C).
-o, --one-database Ignore statements except those that occur while
the
default database is the one named at the command
line.
--pager[=name] Pager to use to display results. If you don't
supply an
option, the default pager is taken from your ENV
variable
PAGER. Valid pagers are less, more, cat [>
filename],
etc. See interactive help (\h) also. This option
does not
work in batch mode. Disable with --disable-
pager. This
option is disabled by default.
-p, --password[=name]
Password to use when connecting to server. If
password is
not given it's asked from the tty.
-P, --port=# Port number to use for connection or 0 for
default to, in
order of preference, my.cnf, $MYSQL_TCP_PORT,
/etc/services, built-in default (3306).
--progress-reports Get progress reports for long running commands
(like
ALTER TABLE)
(Defaults to on; use --skip-progress-reports to
disable.)
--prompt=name Set the mysql prompt to this value.
--protocol=name The protocol to use for connection (tcp, socket,
pipe,
memory).
-q, --quick Don't cache result, print it row by row. This
may slow
down the server if the output is suspended.
Doesn't use
history file.
-r, --raw Write fields without conversion. Used with
--batch.
--reconnect Reconnect if the connection is lost. Disable
with
--disable-reconnect. This option is enabled by
default.
(Defaults to on; use --skip-reconnect to
disable.)
-s, --silent Be more silent. Print results with a tab as
separator,
each row on new line.
-S, --socket=name The socket file to use for connection.
--ssl Enable SSL for connection (automatically enabled
with
other flags).
--ssl-ca=name CA file in PEM format (check OpenSSL docs,
implies
--ssl).
--ssl-capath=name CA directory (check OpenSSL docs, implies
--ssl).
--ssl-cert=name X509 cert in PEM format (implies --ssl).
--ssl-cipher=name SSL cipher to use (implies --ssl).
--ssl-key=name X509 key in PEM format (implies --ssl).
--ssl-verify-server-cert
Verify server's "Common Name" in its cert
against
hostname used when connecting. This option is
disabled by
default.
-t, --table Output in table format.
--tee=name Append everything into outfile. See interactive
help (\h)
also. Does not work in batch mode. Disable with
--disable-tee. This option is disabled by
default.
-u, --user=name User for login if not current user.
-U, --safe-updates Only allow UPDATE and DELETE that uses keys.
-U, --i-am-a-dummy Synonym for option --safe-updates, -U.
-v, --verbose Write more. (-v -v -v gives the table output
format).
-V, --version Output version information and exit.
-w, --wait Wait and retry if connection is down.
--connect-timeout=# Number of seconds before connection timeout.
--max-allowed-packet=#
The maximum packet length to send to or receive
from
server.
--net-buffer-length=#
The buffer size for TCP/IP and socket
communication.
--select-limit=# Automatic limit for SELECT when using --safe-
updates.
--max-join-size=# Automatic limit for rows in a join when using
--safe-updates.
--secure-auth Refuse client connecting to server if it uses
old
(pre-4.1.1) protocol.
--server-arg=name Send embedded server this as a parameter.
--show-warnings Show warnings after every statement.
--plugin-dir=name Directory for client-side plugins.
--default-auth=name Default authentication client-side plugin to
use.
--binary-mode By default, ASCII '\0' is disallowed and '\r\n'
is
translated to '\n'. This switch turns off both
features,
and also turns off parsing of all clientcommands
except
\C and DELIMITER, in non-interactive mode (for
input
piped to mysql or loaded using the 'source'
command).
This is necessary when processing output from
mysqlbinlog
that may contain blobs.
Variables (--variable-name=value)
and boolean options {FALSE|TRUE} Value (after reading options)
---------------------------------
----------------------------------------
abort-source-on-error FALSE
auto-rehash TRUE
auto-vertical-output FALSE
binary-as-hex FALSE
character-sets-dir (No default value)
column-type-info FALSE
comments FALSE
compress FALSE
debug-check FALSE
debug-info FALSE
database (No default value)
default-character-set auto
delimiter ;
vertical FALSE
force FALSE
named-commands FALSE
ignore-spaces FALSE
init-command (No default value)
local-infile FALSE
no-beep FALSE
host (No default value)
html FALSE
xml FALSE
line-numbers TRUE
unbuffered FALSE
column-names TRUE
sigint-ignore FALSE
port 0
progress-reports TRUE
prompt \N [\d]>
quick FALSE
raw FALSE
reconnect TRUE
socket (No default value)
ssl FALSE
ssl-ca (No default value)
ssl-capath (No default value)
ssl-cert (No default value)
ssl-cipher (No default value)
ssl-key (No default value)
ssl-verify-server-cert FALSE
table FALSE
user ruser
safe-updates FALSE
i-am-a-dummy FALSE
connect-timeout 0
max-allowed-packet 16777216
net-buffer-length 16384
select-limit 1000
max-join-size 1000000
secure-auth FALSE
show-warnings FALSE
plugin-dir (No default value)
default-auth (No default value)
binary-mode FALSE
[jraby at carson2 bin]$ ll
------------------------------------------------
Subject: METViewer V2.11 issues (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Wed Jul 15 12:36:31 2020
[jraby at carson2 sql]$ ./plot_20200715_120511.sql
./plot_20200715_120511.sql: line 1: SELECT: command not found
./plot_20200715_120511.sql: line 2: model,: command not found
./plot_20200715_120511.sql: line 3: ld.fcst_init_beg,: command not
found
./plot_20200715_120511.sql: line 4: ld.fcst_valid_beg,: command not
found
./plot_20200715_120511.sql: line 5: ld.fcst_lead,: command not found
./plot_20200715_120511.sql: line 6: interp_pnts,: command not found
./plot_20200715_120511.sql: line 7: TMP: command not found
./plot_20200715_120511.sql: line 8: ECNT_RMSE: command not found
./plot_20200715_120511.sql: line 9: 0: command not found
./plot_20200715_120511.sql: line 10: ld.total,: command not found
./plot_20200715_120511.sql: line 11: ld.me,: command not found
./plot_20200715_120511.sql: line 12: ld.rmse,: command not found
./plot_20200715_120511.sql: line 13: ld.crps,: command not found
./plot_20200715_120511.sql: line 14: ld.crpss,: command not found
./plot_20200715_120511.sql: line 15: ld.ign,: command not found
./plot_20200715_120511.sql: line 16: ld.spread,: command not found
./plot_20200715_120511.sql: line 17: ld.me_oerr,: command not found
./plot_20200715_120511.sql: line 18: ld.rmse_oerr,: command not found
./plot_20200715_120511.sql: line 19: ld.spread_oerr,: command not
found
./plot_20200715_120511.sql: line 20: ld.spread_plus_oerr: command not
found
./plot_20200715_120511.sql: line 21: FROM: command not found
./plot_20200715_120511.sql: line 22: stat_header: command not found
./plot_20200715_120511.sql: line 23: line_data_ecnt: command not found
./plot_20200715_120511.sql: line 24: WHERE: command not found
./plot_20200715_120511.sql: line 25: syntax error near unexpected
token `('
./plot_20200715_120511.sql: line 25: ` BINARY h.model IN ('1km_WRE-
N_MSA', '3km_WRE-N_MSA', '9km_WRE-N_MSA')'
------------------------------------------------
Subject: METViewer V2.11 issues (UNCLASSIFIED)
From: Tatiana Burek
Time: Wed Jul 15 13:12:18 2020
John
In you log file I see an error about missing gsl library.
As I remember we were talking about this problem in the past.
Error: package or namespace load failed for ‘gsl’ in dyn.load(file,
DLLpath = DLLpath, ...):
unable to load shared object '/home/jraby/R-
3.6.1/library/gsl/libs/gsl.so':
You need to correctly install ‘gsl’ or try to comment it out in
/opt/tomcat7/webapps/metviewer/R_work/include/agg_stat.R
#library(gsl);
Tatiana
On Wed Jul 15 12:36:30 2020, john.w.raby2.civ at mail.mil wrote:
> Tatiana -
>
> I've attached the log file was generated after I regenerated the
plot.
>
> When I accessed the mv_HiRA database, I received a lot of screen
> dialog. See attached text file.
>
> Used the MySQL query obtained from the SQL tab which generated the
> response in the attached txt file.
>
> R/
> John
>
>
>
>
> ________________________________________
> From: Tatiana Burek via RT [met_help at ucar.edu]
> Sent: Wednesday, July 15, 2020 11:54 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
> issues (UNCLASSIFIED)
>
> Hi John
> I still think that you don't have data in the database.
> Could you run a plot one more time and when it is done look at the
log
> messages in the 'Log' tab.
> Or if you have an access to the server's file system, find a file
with
> the messages:
> /opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.log
>
> Could you send this output to me?
>
> Can you access the data in your database?
> mysql -u <user_name> -p <pwd> mv_HiRA
>
> If you do, could you get MySQl query from 'SQL' tab or from file:
> /opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.sql
> and run this query in the console.
> Do you get data?
>
> Tatiana
>
>
> On Tue Jul 14 16:51:12 2020, john.w.raby2.civ at mail.mil wrote:
> > Tatiana -
> >
> > Sorry for the delay in getting back to you on the results of my
> > testing. I tried to plot ECNT_RMSE using aggregation of the ECNT
line
> > type vice summary statistics. I tried to plot ECNT_RMSE as a
function
> > of interp_points for 3 different models but I'm getting "no image
> > available" with a pop-up which shows a plot filename. See attached
> > image. I exported the plot XML which is also attached. I looked at
> > the
> > .stat file and it contains the ECNT line type.
> >
> > R/
> > John
> > ________________________________________
> > From: Raby, John W CIV USARMY CCDC ARL (USA)
> > Sent: Thursday, July 09, 2020 8:30 AM
> > To: met_help at ucar.edu
> > Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer
> > V2.11
> > issues (UNCLASSIFIED)
> >
> > Tatiana -
> >
> > Thanks for your inputs on the possible causes for the issues.
> >
> > I certainly plan to upgrade METViewer, but will wait until the
work
> > situation for my system admin person and myself returns to normal.
> >
> > For #1, yours is a valid point (no RMSE data). I will look in the
> > .stat file to see if the only RMSE data I had was for interp_pnts
= 4
> >
> > For #2,3, I checked the .stat file and it contains the ECNT line
> > type.
> > I'll retry the plot using Aggregation statistics per your
suggestion.
> >
> > R/
> > John
> > ________________________________________
> > From: Tatiana Burek via RT [met_help at ucar.edu]
> > Sent: Thursday, July 09, 2020 7:58 AM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
> > issues (UNCLASSIFIED)
> >
> > Hi John,
> > #4 We start support RPS line type in METviewer starting from v3.0.
> > You
> > need to update your METviewer instance in order to use it.
> >
> > #1. It is difficult for me to explain why METviwer doesn't plot
all
> > interp_pnts without seeing the data.The simple explanation - you
> > probably don't have any data to display.
> >
> > #2,3. All stats that start from ECNT_ can only be plotted as an
> > aggregation of lines. It means you need to select Aggregation
> > statistics -> Ensemble Continuous Statistics (ECNT). Also to
> > calculate
> > this stat you need data in ECNT table ( ECNT line type).
> >
> > Tatiana
> >
> > On Wed Jul 08 10:27:47 2020, john.w.raby2.civ at mail.mil wrote:
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > I loaded the .stat files into the DB for 3 different models
which
> > > were
> > > produced by Point-Stat. I used one fcst file and one obs file
for
> > > each model
> > > to run Point-Stat. I used the HiRA tool in Point-Stat and
specified
> > > several
> > > thresholds and neighborhood widths which successfully generated
the
> > > RPS and
> > > ECNT output files. On loading the .stat files into the DB, it
> > > flagged
> > > the
> > > RPS line type as being unexpected. I successfully plotted the
all
> > > PSTC
> > > statistics (Y dep vrbl) which were available for 3 models (Y
series
> > > vrbls)
> > > for several interp_points and for several fcst_thresh values
(ind
> > > vrbls).
> > > The issues which resulted in "No image available" were as
follows:
> > >
> > > 1. Can plot RMSE Y dep vrbl (summary statistic) for one lead
time
> > > (ind vrbl), but when I try plotting for several interp_pnts (ind
> > > vrbl) it
> > > only plots the RMSE for 4 interp points and no others despite
> > > selecting them
> > > all. All interp_points values were listed along the x-axis of
the
> > > plot.
> > > 2. Unable to plot the summary stat ECNT_RMSE (Y dep vrbl) for
one
> > > lead time (ind vrbl) for several interp_pnts and fcst_thresh
values
> > > 3. Ditto the results in #2 for all ECNT statistics.
> > > 4. Unable to plot RPS statistics as they did not load
(unexpected
> > > statistic)
> > >
> > > Do you have any suggestions for things to look for in setting up
> > > the
> > > plot
> > > which I might have overlooked and which might have caused the
above
> > > issues?
> > >
> > > Thanks.
> > >
> > > R/
> > > John
> > >
> > > Mr. John W. Raby
> > > U.S. Army Research Laboratory
> > > White Sands Missile Range, NM 88002
> > > Office:(575) 678-2004 DSN 258-2004
> > > Teleworking: Contact Admin Specialist at (410) 278-6974
> > > FAX (575) 678-1230 DSN 258-1230
> > > Email: john.w.raby2.civ at mail.mil
> > >
> > > CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11 issues (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Wed Jul 15 13:28:21 2020
Tatiana -
Thanks for pointing that out. I hadn't realized that gsl has somehow
gone sour since we had it running fine beginning 21 MAY. I know that I
was able to generate aggregated plots (which requires gsl) back on 19
JUN , so something happened after that. I'll get with my system admin
to track down the failure. I guess the lesson learned is to check the
log file which I'll try to do in the future.
R/
John
________________________________________
From: Tatiana Burek via RT [met_help at ucar.edu]
Sent: Wednesday, July 15, 2020 1:12 PM
To: Raby, John W CIV USARMY CCDC ARL (USA)
Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
issues (UNCLASSIFIED)
John
In you log file I see an error about missing gsl library.
As I remember we were talking about this problem in the past.
Error: package or namespace load failed for ‘gsl’ in dyn.load(file,
DLLpath = DLLpath, ...):
unable to load shared object '/home/jraby/R-
3.6.1/library/gsl/libs/gsl.so':
You need to correctly install ‘gsl’ or try to comment it out in
/opt/tomcat7/webapps/metviewer/R_work/include/agg_stat.R
#library(gsl);
Tatiana
On Wed Jul 15 12:36:30 2020, john.w.raby2.civ at mail.mil wrote:
> Tatiana -
>
> I've attached the log file was generated after I regenerated the
plot.
>
> When I accessed the mv_HiRA database, I received a lot of screen
> dialog. See attached text file.
>
> Used the MySQL query obtained from the SQL tab which generated the
> response in the attached txt file.
>
> R/
> John
>
>
>
>
> ________________________________________
> From: Tatiana Burek via RT [met_help at ucar.edu]
> Sent: Wednesday, July 15, 2020 11:54 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
> issues (UNCLASSIFIED)
>
> Hi John
> I still think that you don't have data in the database.
> Could you run a plot one more time and when it is done look at the
log
> messages in the 'Log' tab.
> Or if you have an access to the server's file system, find a file
with
> the messages:
> /opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.log
>
> Could you send this output to me?
>
> Can you access the data in your database?
> mysql -u <user_name> -p <pwd> mv_HiRA
>
> If you do, could you get MySQl query from 'SQL' tab or from file:
> /opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.sql
> and run this query in the console.
> Do you get data?
>
> Tatiana
>
>
> On Tue Jul 14 16:51:12 2020, john.w.raby2.civ at mail.mil wrote:
> > Tatiana -
> >
> > Sorry for the delay in getting back to you on the results of my
> > testing. I tried to plot ECNT_RMSE using aggregation of the ECNT
line
> > type vice summary statistics. I tried to plot ECNT_RMSE as a
function
> > of interp_points for 3 different models but I'm getting "no image
> > available" with a pop-up which shows a plot filename. See attached
> > image. I exported the plot XML which is also attached. I looked at
> > the
> > .stat file and it contains the ECNT line type.
> >
> > R/
> > John
> > ________________________________________
> > From: Raby, John W CIV USARMY CCDC ARL (USA)
> > Sent: Thursday, July 09, 2020 8:30 AM
> > To: met_help at ucar.edu
> > Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer
> > V2.11
> > issues (UNCLASSIFIED)
> >
> > Tatiana -
> >
> > Thanks for your inputs on the possible causes for the issues.
> >
> > I certainly plan to upgrade METViewer, but will wait until the
work
> > situation for my system admin person and myself returns to normal.
> >
> > For #1, yours is a valid point (no RMSE data). I will look in the
> > .stat file to see if the only RMSE data I had was for interp_pnts
= 4
> >
> > For #2,3, I checked the .stat file and it contains the ECNT line
> > type.
> > I'll retry the plot using Aggregation statistics per your
suggestion.
> >
> > R/
> > John
> > ________________________________________
> > From: Tatiana Burek via RT [met_help at ucar.edu]
> > Sent: Thursday, July 09, 2020 7:58 AM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
> > issues (UNCLASSIFIED)
> >
> > Hi John,
> > #4 We start support RPS line type in METviewer starting from v3.0.
> > You
> > need to update your METviewer instance in order to use it.
> >
> > #1. It is difficult for me to explain why METviwer doesn't plot
all
> > interp_pnts without seeing the data.The simple explanation - you
> > probably don't have any data to display.
> >
> > #2,3. All stats that start from ECNT_ can only be plotted as an
> > aggregation of lines. It means you need to select Aggregation
> > statistics -> Ensemble Continuous Statistics (ECNT). Also to
> > calculate
> > this stat you need data in ECNT table ( ECNT line type).
> >
> > Tatiana
> >
> > On Wed Jul 08 10:27:47 2020, john.w.raby2.civ at mail.mil wrote:
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > I loaded the .stat files into the DB for 3 different models
which
> > > were
> > > produced by Point-Stat. I used one fcst file and one obs file
for
> > > each model
> > > to run Point-Stat. I used the HiRA tool in Point-Stat and
specified
> > > several
> > > thresholds and neighborhood widths which successfully generated
the
> > > RPS and
> > > ECNT output files. On loading the .stat files into the DB, it
> > > flagged
> > > the
> > > RPS line type as being unexpected. I successfully plotted the
all
> > > PSTC
> > > statistics (Y dep vrbl) which were available for 3 models (Y
series
> > > vrbls)
> > > for several interp_points and for several fcst_thresh values
(ind
> > > vrbls).
> > > The issues which resulted in "No image available" were as
follows:
> > >
> > > 1. Can plot RMSE Y dep vrbl (summary statistic) for one lead
time
> > > (ind vrbl), but when I try plotting for several interp_pnts (ind
> > > vrbl) it
> > > only plots the RMSE for 4 interp points and no others despite
> > > selecting them
> > > all. All interp_points values were listed along the x-axis of
the
> > > plot.
> > > 2. Unable to plot the summary stat ECNT_RMSE (Y dep vrbl) for
one
> > > lead time (ind vrbl) for several interp_pnts and fcst_thresh
values
> > > 3. Ditto the results in #2 for all ECNT statistics.
> > > 4. Unable to plot RPS statistics as they did not load
(unexpected
> > > statistic)
> > >
> > > Do you have any suggestions for things to look for in setting up
> > > the
> > > plot
> > > which I might have overlooked and which might have caused the
above
> > > issues?
> > >
> > > Thanks.
> > >
> > > R/
> > > John
> > >
> > > Mr. John W. Raby
> > > U.S. Army Research Laboratory
> > > White Sands Missile Range, NM 88002
> > > Office:(575) 678-2004 DSN 258-2004
> > > Teleworking: Contact Admin Specialist at (410) 278-6974
> > > FAX (575) 678-1230 DSN 258-1230
> > > Email: john.w.raby2.civ at mail.mil
> > >
> > > CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11 issues (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Wed Jul 15 16:11:17 2020
Tatiana -
My system admin tech is Rey Armendarez and I cc'd him on this email.
He would like to ask you some questions about GSL. We have GSL
installed as well as the R package for GSL. Just need to discuss the
environment settings, etc. He will be in touch soon. Perhaps one
possible course of action to consider would be to install the updated
version of METviewer since Rey would be the one to work the
installation from this end. I'll let Rey decide based on his
assessment and your feedback.
Thanks.
R/
John
________________________________________
From: Raby, John W CIV USARMY CCDC ARL (USA)
Sent: Wednesday, July 15, 2020 1:28 PM
To: met_help at ucar.edu
Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
issues (UNCLASSIFIED)
Tatiana -
Thanks for pointing that out. I hadn't realized that gsl has somehow
gone sour since we had it running fine beginning 21 MAY. I know that I
was able to generate aggregated plots (which requires gsl) back on 19
JUN , so something happened after that. I'll get with my system admin
to track down the failure. I guess the lesson learned is to check the
log file which I'll try to do in the future.
R/
John
________________________________________
From: Tatiana Burek via RT [met_help at ucar.edu]
Sent: Wednesday, July 15, 2020 1:12 PM
To: Raby, John W CIV USARMY CCDC ARL (USA)
Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
issues (UNCLASSIFIED)
John
In you log file I see an error about missing gsl library.
As I remember we were talking about this problem in the past.
Error: package or namespace load failed for ‘gsl’ in dyn.load(file,
DLLpath = DLLpath, ...):
unable to load shared object '/home/jraby/R-
3.6.1/library/gsl/libs/gsl.so':
You need to correctly install ‘gsl’ or try to comment it out in
/opt/tomcat7/webapps/metviewer/R_work/include/agg_stat.R
#library(gsl);
Tatiana
On Wed Jul 15 12:36:30 2020, john.w.raby2.civ at mail.mil wrote:
> Tatiana -
>
> I've attached the log file was generated after I regenerated the
plot.
>
> When I accessed the mv_HiRA database, I received a lot of screen
> dialog. See attached text file.
>
> Used the MySQL query obtained from the SQL tab which generated the
> response in the attached txt file.
>
> R/
> John
>
>
>
>
> ________________________________________
> From: Tatiana Burek via RT [met_help at ucar.edu]
> Sent: Wednesday, July 15, 2020 11:54 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
> issues (UNCLASSIFIED)
>
> Hi John
> I still think that you don't have data in the database.
> Could you run a plot one more time and when it is done look at the
log
> messages in the 'Log' tab.
> Or if you have an access to the server's file system, find a file
with
> the messages:
> /opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.log
>
> Could you send this output to me?
>
> Can you access the data in your database?
> mysql -u <user_name> -p <pwd> mv_HiRA
>
> If you do, could you get MySQl query from 'SQL' tab or from file:
> /opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.sql
> and run this query in the console.
> Do you get data?
>
> Tatiana
>
>
> On Tue Jul 14 16:51:12 2020, john.w.raby2.civ at mail.mil wrote:
> > Tatiana -
> >
> > Sorry for the delay in getting back to you on the results of my
> > testing. I tried to plot ECNT_RMSE using aggregation of the ECNT
line
> > type vice summary statistics. I tried to plot ECNT_RMSE as a
function
> > of interp_points for 3 different models but I'm getting "no image
> > available" with a pop-up which shows a plot filename. See attached
> > image. I exported the plot XML which is also attached. I looked at
> > the
> > .stat file and it contains the ECNT line type.
> >
> > R/
> > John
> > ________________________________________
> > From: Raby, John W CIV USARMY CCDC ARL (USA)
> > Sent: Thursday, July 09, 2020 8:30 AM
> > To: met_help at ucar.edu
> > Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer
> > V2.11
> > issues (UNCLASSIFIED)
> >
> > Tatiana -
> >
> > Thanks for your inputs on the possible causes for the issues.
> >
> > I certainly plan to upgrade METViewer, but will wait until the
work
> > situation for my system admin person and myself returns to normal.
> >
> > For #1, yours is a valid point (no RMSE data). I will look in the
> > .stat file to see if the only RMSE data I had was for interp_pnts
= 4
> >
> > For #2,3, I checked the .stat file and it contains the ECNT line
> > type.
> > I'll retry the plot using Aggregation statistics per your
suggestion.
> >
> > R/
> > John
> > ________________________________________
> > From: Tatiana Burek via RT [met_help at ucar.edu]
> > Sent: Thursday, July 09, 2020 7:58 AM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
> > issues (UNCLASSIFIED)
> >
> > Hi John,
> > #4 We start support RPS line type in METviewer starting from v3.0.
> > You
> > need to update your METviewer instance in order to use it.
> >
> > #1. It is difficult for me to explain why METviwer doesn't plot
all
> > interp_pnts without seeing the data.The simple explanation - you
> > probably don't have any data to display.
> >
> > #2,3. All stats that start from ECNT_ can only be plotted as an
> > aggregation of lines. It means you need to select Aggregation
> > statistics -> Ensemble Continuous Statistics (ECNT). Also to
> > calculate
> > this stat you need data in ECNT table ( ECNT line type).
> >
> > Tatiana
> >
> > On Wed Jul 08 10:27:47 2020, john.w.raby2.civ at mail.mil wrote:
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > I loaded the .stat files into the DB for 3 different models
which
> > > were
> > > produced by Point-Stat. I used one fcst file and one obs file
for
> > > each model
> > > to run Point-Stat. I used the HiRA tool in Point-Stat and
specified
> > > several
> > > thresholds and neighborhood widths which successfully generated
the
> > > RPS and
> > > ECNT output files. On loading the .stat files into the DB, it
> > > flagged
> > > the
> > > RPS line type as being unexpected. I successfully plotted the
all
> > > PSTC
> > > statistics (Y dep vrbl) which were available for 3 models (Y
series
> > > vrbls)
> > > for several interp_points and for several fcst_thresh values
(ind
> > > vrbls).
> > > The issues which resulted in "No image available" were as
follows:
> > >
> > > 1. Can plot RMSE Y dep vrbl (summary statistic) for one lead
time
> > > (ind vrbl), but when I try plotting for several interp_pnts (ind
> > > vrbl) it
> > > only plots the RMSE for 4 interp points and no others despite
> > > selecting them
> > > all. All interp_points values were listed along the x-axis of
the
> > > plot.
> > > 2. Unable to plot the summary stat ECNT_RMSE (Y dep vrbl) for
one
> > > lead time (ind vrbl) for several interp_pnts and fcst_thresh
values
> > > 3. Ditto the results in #2 for all ECNT statistics.
> > > 4. Unable to plot RPS statistics as they did not load
(unexpected
> > > statistic)
> > >
> > > Do you have any suggestions for things to look for in setting up
> > > the
> > > plot
> > > which I might have overlooked and which might have caused the
above
> > > issues?
> > >
> > > Thanks.
> > >
> > > R/
> > > John
> > >
> > > Mr. John W. Raby
> > > U.S. Army Research Laboratory
> > > White Sands Missile Range, NM 88002
> > > Office:(575) 678-2004 DSN 258-2004
> > > Teleworking: Contact Admin Specialist at (410) 278-6974
> > > FAX (575) 678-1230 DSN 258-1230
> > > Email: john.w.raby2.civ at mail.mil
> > >
> > > CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: METViewer V2.11 issues (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Tue Jul 21 08:52:17 2020
CLASSIFICATION: UNCLASSIFIED
Tatiana -
Rey Armendarez fixed the problem which had temporarily prevented gsl
from working. A recent upgrade to Tomcat was detected and when Rey
reverted back to the previous version, I was able to generate the
ECNT_RMSE plot.
Rey is investigating how we can upgrade to the new Tomcat version and
maintain the gsl functionality because sooner or later, we will be
forced to upgrade it due higher system admin authority requiring it.
Rey is also planning on installing the newest METViewer version too,
but I need to complete some plotting perhaps before this happens over
the next couple of months.
Thanks for your assistance in troubleshooting this issue.
R/
John
-----Original Message-----
From: Tatiana Burek via RT <met_help at ucar.edu>
Sent: Wednesday, July 15, 2020 1:12 PM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
issues (UNCLASSIFIED)
John
In you log file I see an error about missing gsl library.
As I remember we were talking about this problem in the past.
Error: package or namespace load failed for ‘gsl’ in dyn.load(file,
DLLpath = DLLpath, ...):
unable to load shared object '/home/jraby/R-
3.6.1/library/gsl/libs/gsl.so':
You need to correctly install ‘gsl’ or try to comment it out in
/opt/tomcat7/webapps/metviewer/R_work/include/agg_stat.R
#library(gsl);
Tatiana
On Wed Jul 15 12:36:30 2020, john.w.raby2.civ at mail.mil wrote:
> Tatiana -
>
> I've attached the log file was generated after I regenerated the
plot.
>
> When I accessed the mv_HiRA database, I received a lot of screen
> dialog. See attached text file.
>
> Used the MySQL query obtained from the SQL tab which generated the
> response in the attached txt file.
>
> R/
> John
>
>
>
>
> ________________________________________
> From: Tatiana Burek via RT [met_help at ucar.edu]
> Sent: Wednesday, July 15, 2020 11:54 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
> issues (UNCLASSIFIED)
>
> Hi John
> I still think that you don't have data in the database.
> Could you run a plot one more time and when it is done look at the
log
> messages in the 'Log' tab.
> Or if you have an access to the server's file system, find a file
with
> the messages:
> /opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.log
>
> Could you send this output to me?
>
> Can you access the data in your database?
> mysql -u <user_name> -p <pwd> mv_HiRA
>
> If you do, could you get MySQl query from 'SQL' tab or from file:
> /opt/tomcat7/webapps/metviewer_output/xml/plot_<plot_number>.sql
> and run this query in the console.
> Do you get data?
>
> Tatiana
>
>
> On Tue Jul 14 16:51:12 2020, john.w.raby2.civ at mail.mil wrote:
> > Tatiana -
> >
> > Sorry for the delay in getting back to you on the results of my
> > testing. I tried to plot ECNT_RMSE using aggregation of the ECNT
> > line type vice summary statistics. I tried to plot ECNT_RMSE as a
> > function of interp_points for 3 different models but I'm getting
"no
> > image available" with a pop-up which shows a plot filename. See
> > attached image. I exported the plot XML which is also attached. I
> > looked at the .stat file and it contains the ECNT line type.
> >
> > R/
> > John
> > ________________________________________
> > From: Raby, John W CIV USARMY CCDC ARL (USA)
> > Sent: Thursday, July 09, 2020 8:30 AM
> > To: met_help at ucar.edu
> > Subject: RE: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer
> > V2.11
> > issues (UNCLASSIFIED)
> >
> > Tatiana -
> >
> > Thanks for your inputs on the possible causes for the issues.
> >
> > I certainly plan to upgrade METViewer, but will wait until the
work
> > situation for my system admin person and myself returns to normal.
> >
> > For #1, yours is a valid point (no RMSE data). I will look in the
> > .stat file to see if the only RMSE data I had was for interp_pnts
=
> > 4
> >
> > For #2,3, I checked the .stat file and it contains the ECNT line
> > type.
> > I'll retry the plot using Aggregation statistics per your
suggestion.
> >
> > R/
> > John
> > ________________________________________
> > From: Tatiana Burek via RT [met_help at ucar.edu]
> > Sent: Thursday, July 09, 2020 7:58 AM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > Subject: [Non-DoD Source] [rt.rap.ucar.edu #95849] METViewer V2.11
> > issues (UNCLASSIFIED)
> >
> > Hi John,
> > #4 We start support RPS line type in METviewer starting from v3.0.
> > You
> > need to update your METviewer instance in order to use it.
> >
> > #1. It is difficult for me to explain why METviwer doesn't plot
all
> > interp_pnts without seeing the data.The simple explanation - you
> > probably don't have any data to display.
> >
> > #2,3. All stats that start from ECNT_ can only be plotted as an
> > aggregation of lines. It means you need to select Aggregation
> > statistics -> Ensemble Continuous Statistics (ECNT). Also to
> > calculate this stat you need data in ECNT table ( ECNT line type).
> >
> > Tatiana
> >
> > On Wed Jul 08 10:27:47 2020, john.w.raby2.civ at mail.mil wrote:
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > I loaded the .stat files into the DB for 3 different models
which
> > > were produced by Point-Stat. I used one fcst file and one obs
file
> > > for each model to run Point-Stat. I used the HiRA tool in
> > > Point-Stat and specified several thresholds and neighborhood
> > > widths which successfully generated the RPS and ECNT output
files.
> > > On loading the .stat files into the DB, it flagged the RPS line
> > > type as being unexpected. I successfully plotted the all PSTC
> > > statistics (Y dep vrbl) which were available for 3 models (Y
> > > series
> > > vrbls)
> > > for several interp_points and for several fcst_thresh values
(ind
> > > vrbls).
> > > The issues which resulted in "No image available" were as
follows:
> > >
> > > 1. Can plot RMSE Y dep vrbl (summary statistic) for one lead
time
> > > (ind vrbl), but when I try plotting for several interp_pnts (ind
> > > vrbl) it
> > > only plots the RMSE for 4 interp points and no others despite
> > > selecting them all. All interp_points values were listed along
the
> > > x-axis of the plot.
> > > 2. Unable to plot the summary stat ECNT_RMSE (Y dep vrbl) for
one
> > > lead time (ind vrbl) for several interp_pnts and fcst_thresh
> > > values 3. Ditto the results in #2 for all ECNT statistics.
> > > 4. Unable to plot RPS statistics as they did not load
(unexpected
> > > statistic)
> > >
> > > Do you have any suggestions for things to look for in setting up
> > > the plot which I might have overlooked and which might have
caused
> > > the above issues?
> > >
> > > Thanks.
> > >
> > > R/
> > > John
> > >
> > > Mr. John W. Raby
> > > U.S. Army Research Laboratory
> > > White Sands Missile Range, NM 88002
> > > Office:(575) 678-2004 DSN 258-2004
> > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
(575)
> > > 678-1230 DSN 258-1230
> > > Email: john.w.raby2.civ at mail.mil
> > >
> > > CLASSIFICATION: UNCLASSIFIED
CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
More information about the Met_help
mailing list