[Met_help] [rt.rap.ucar.edu #88776] History for Range Check Error in Stat Analysis
John Halley Gotway via RT
met_help at ucar.edu
Wed Feb 6 15:04:10 MST 2019
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
John, I am running stat analysis on some point stat (not hira) files and
looking to get CTS results for precip type. Precip type ranges from 0-7 in
my model and observation files. Then I run the code I get:
DEBUG 3: Processing STAT file
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
mf_all_150000L_20190115_150000V.stat" ... 81 of 84
DEBUG 3: Processing STAT file
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
mf_all_270000L_20190115_030000V.stat" ... 82 of 84
DEBUG 3: Processing STAT file
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
mf_all_210000L_20190112_210000V.stat" ... 83 of 84
DEBUG 3: Processing STAT file
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
mf_all_330000L_20190114_090000V.stat" ... 84 of 84
DEBUG 2: STAT Lines read = 186613
DEBUG 2: STAT Lines retained = 2298
DEBUG 4:
DEBUG 4: Initializing Job 1 to default job: "-job aggregate_stat
-fcst_valid_beg 20190112_000000 -fcst_valid_end 20190112_000000 -line_type
MPR -by DESC -by FCST_THRESH -by FCST_LEAD -dump_row
/h/data/global/WXQC/data/met/filter_job -out_line_type CTS -out_alpha
0.05000 -boot_interval 1 -boot_rep_prop 1.00000 -n_boot_rep 1000 -boot_rng
mt19937 -boot_seed '' "
DEBUG 4:
DEBUG 4: Amending Job 1 with options: "-job aggregate_stat -line_type MPR
-out_line_type CTS -fcst_valid_beg 20190112_000000 -fcst_valid_end
20190112_000000 -by desc -by FCST_THRESH -by FCST_LEAD -dump_row
/h/data/global/WXQC/data/met/filter_job"
DEBUG 4:
DEBUG 4: Amending Job 1 with command line options: "-job aggregate_stat
-line_type MPR -out_line_type CTS -fcst_valid_beg 20190112_000000
-fcst_valid_end 20190112_000000 -by desc -by FCST_THRESH -by FCST_LEAD
-dump_row /h/data/global/WXQC/data/met/filter_job"
DEBUG 2:
DEBUG 2: Processing Job 1: -job aggregate_stat -fcst_valid_beg
20190112_000000 -fcst_valid_end 20190112_000000 -line_type MPR -by DESC -by
FCST_THRESH -by FCST_LEAD -dump_row /h/data/global/WXQC/data/met/filter_job
-out_line_type CTS -out_alpha 0.05000 -boot_interval 1 -boot_rep_prop
1.00000 -n_boot_rep 1000 -boot_rng mt19937 -boot_seed ''
DEBUG 1: Creating dump row output file
"/h/data/global/WXQC/data/met/filter_job"
GSL_RNG_TYPE=mt19937
GSL_RNG_SEED=18446744072848627804
DEBUG 2: Computing output for 1 case(s).
ERROR :
ERROR : ThreshArray::operator[](int) const -> range check error!
ERROR :
I know we have seen this before but don't remember what triggers it. It
would be a nice addition to the users manual to explain possible causes for
errors like this. Attached is the MPR file I am reading.
Thanks
Bob
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: FW: [Non-DoD Source] [rt.rap.ucar.edu #88776] AutoReply: Range Check Error in Stat Analysis
From: robert.craig.2 at us.af.mil
Time: Tue Feb 05 14:42:00 2019
John, found a work around.
Bob
-----Original Message-----
From: met_help at ucar.edu via RT <met_help at ucar.edu>
Sent: Monday, February 4, 2019 3:56 PM
To: CRAIG, ROBERT J GS-12 USAF ACC 16 WS/WXN
<robert.craig.2 at us.af.mil>
Subject: [Non-DoD Source] [rt.rap.ucar.edu #88776] AutoReply: Range
Check Error in Stat Analysis
Greetings,
This message has been automatically generated in response to the
creation of a trouble ticket regarding:
"Range Check Error in Stat Analysis",
a summary of which appears below.
There is no need to reply to this message right now. Your ticket has
been assigned an ID of [rt.rap.ucar.edu #88776].
Please include the string:
[rt.rap.ucar.edu #88776]
in the subject line of all future correspondence about this issue. To
do so, you may reply to this message.
For more information, please see:
MET Online Tutorial:
https://www.dtcenter.org/met/users/support/online_tutorial/index.php
MET Users Guide:
https://www.dtcenter.org/met/users/docs/overview.php
MET FAQs:
https://www.dtcenter.org/met/users/support/faqs/index.php
MET-Help Email Archive:
http://mailman.ucar.edu/pipermail/met_help
Thank you,
met_help at ucar.edu
-------------------------------------------------------------------------
John, I am running stat analysis on some point stat (not hira) files
and looking to get CTS results for precip type. Precip type ranges
from 0-7 in my model and observation files. Then I run the code I
get:
DEBUG 3: Processing STAT file
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
mf_all_150000L_20190115_150000V.stat" ... 81 of 84
DEBUG 3: Processing STAT file
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
mf_all_270000L_20190115_030000V.stat" ... 82 of 84
DEBUG 3: Processing STAT file
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
mf_all_210000L_20190112_210000V.stat" ... 83 of 84
DEBUG 3: Processing STAT file
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
mf_all_330000L_20190114_090000V.stat" ... 84 of 84
DEBUG 2: STAT Lines read = 186613
DEBUG 2: STAT Lines retained = 2298
DEBUG 4:
DEBUG 4: Initializing Job 1 to default job: "-job aggregate_stat
-fcst_valid_beg 20190112_000000 -fcst_valid_end 20190112_000000
-line_type MPR -by DESC -by FCST_THRESH -by FCST_LEAD -dump_row
/h/data/global/WXQC/data/met/filter_job -out_line_type CTS -out_alpha
0.05000 -boot_interval 1 -boot_rep_prop 1.00000 -n_boot_rep 1000
-boot_rng
mt19937 -boot_seed '' "
DEBUG 4:
DEBUG 4: Amending Job 1 with options: "-job aggregate_stat -line_type
MPR -out_line_type CTS -fcst_valid_beg 20190112_000000 -fcst_valid_end
20190112_000000 -by desc -by FCST_THRESH -by FCST_LEAD -dump_row
/h/data/global/WXQC/data/met/filter_job"
DEBUG 4:
DEBUG 4: Amending Job 1 with command line options: "-job
aggregate_stat -line_type MPR -out_line_type CTS -fcst_valid_beg
20190112_000000 -fcst_valid_end 20190112_000000 -by desc -by
FCST_THRESH -by FCST_LEAD -dump_row
/h/data/global/WXQC/data/met/filter_job"
DEBUG 2:
DEBUG 2: Processing Job 1: -job aggregate_stat -fcst_valid_beg
20190112_000000 -fcst_valid_end 20190112_000000 -line_type MPR -by
DESC -by FCST_THRESH -by FCST_LEAD -dump_row
/h/data/global/WXQC/data/met/filter_job
-out_line_type CTS -out_alpha 0.05000 -boot_interval 1 -boot_rep_prop
1.00000 -n_boot_rep 1000 -boot_rng mt19937 -boot_seed ''
DEBUG 1: Creating dump row output file
"/h/data/global/WXQC/data/met/filter_job"
GSL_RNG_TYPE=mt19937
GSL_RNG_SEED=18446744072848627804
DEBUG 2: Computing output for 1 case(s).
ERROR :
ERROR : ThreshArray::operator[](int) const -> range check error!
ERROR :
I know we have seen this before but don't remember what triggers it.
It would be a nice addition to the users manual to explain possible
causes for errors like this. Attached is the MPR file I am reading.
Thanks
Bob
------------------------------------------------
Subject: Range Check Error in Stat Analysis
From: John Halley Gotway
Time: Wed Feb 06 10:19:32 2019
Bob,
OK, I did receive the ARL Safe email with your data, but didn't have
time
to go grab it over the last couple of days during the METplus
tutorial. I
went to go grab it just now but found that the link expired after 14
hours. I'm surprised that it's so quick.
Anyway, glad you found a workaround. I would've preferred to figure
it out
and give you a definitive answer.
But please let me know what other issues your run into.
Thanks,
John
On Tue, Feb 5, 2019 at 2:42 PM robert.craig.2 at us.af.mil via RT <
met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=88776 >
>
> John, found a work around.
>
> Bob
>
> -----Original Message-----
> From: met_help at ucar.edu via RT <met_help at ucar.edu>
> Sent: Monday, February 4, 2019 3:56 PM
> To: CRAIG, ROBERT J GS-12 USAF ACC 16 WS/WXN
<robert.craig.2 at us.af.mil>
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #88776] AutoReply: Range
Check
> Error in Stat Analysis
>
> Greetings,
>
> This message has been automatically generated in response to the
creation
> of a trouble ticket regarding:
> "Range Check Error in Stat Analysis",
> a summary of which appears below.
>
> There is no need to reply to this message right now. Your ticket
has been
> assigned an ID of [rt.rap.ucar.edu #88776].
>
> Please include the string:
>
> [rt.rap.ucar.edu #88776]
>
> in the subject line of all future correspondence about this issue.
To do
> so, you may reply to this message.
>
> For more information, please see:
>
> MET Online Tutorial:
>
https://www.dtcenter.org/met/users/support/online_tutorial/index.php
>
> MET Users Guide:
> https://www.dtcenter.org/met/users/docs/overview.php
>
> MET FAQs:
> https://www.dtcenter.org/met/users/support/faqs/index.php
>
> MET-Help Email Archive:
> http://mailman.ucar.edu/pipermail/met_help
>
> Thank you,
> met_help at ucar.edu
>
>
-------------------------------------------------------------------------
> John, I am running stat analysis on some point stat (not hira) files
and
> looking to get CTS results for precip type. Precip type ranges from
0-7 in
> my model and observation files. Then I run the code I get:
>
>
>
> DEBUG 3: Processing STAT file
>
>
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
> mf_all_150000L_20190115_150000V.stat" ... 81 of 84
>
> DEBUG 3: Processing STAT file
>
>
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
> mf_all_270000L_20190115_030000V.stat" ... 82 of 84
>
> DEBUG 3: Processing STAT file
>
>
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
> mf_all_210000L_20190112_210000V.stat" ... 83 of 84
>
> DEBUG 3: Processing STAT file
>
>
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat_galwe
> mf_all_330000L_20190114_090000V.stat" ... 84 of 84
>
> DEBUG 2: STAT Lines read = 186613
>
> DEBUG 2: STAT Lines retained = 2298
>
> DEBUG 4:
>
> DEBUG 4: Initializing Job 1 to default job: "-job aggregate_stat
> -fcst_valid_beg 20190112_000000 -fcst_valid_end 20190112_000000
-line_type
> MPR -by DESC -by FCST_THRESH -by FCST_LEAD -dump_row
> /h/data/global/WXQC/data/met/filter_job -out_line_type CTS
-out_alpha
> 0.05000 -boot_interval 1 -boot_rep_prop 1.00000 -n_boot_rep 1000
-boot_rng
> mt19937 -boot_seed '' "
>
> DEBUG 4:
>
> DEBUG 4: Amending Job 1 with options: "-job aggregate_stat
-line_type MPR
> -out_line_type CTS -fcst_valid_beg 20190112_000000 -fcst_valid_end
> 20190112_000000 -by desc -by FCST_THRESH -by FCST_LEAD -dump_row
> /h/data/global/WXQC/data/met/filter_job"
>
> DEBUG 4:
>
> DEBUG 4: Amending Job 1 with command line options: "-job
aggregate_stat
> -line_type MPR -out_line_type CTS -fcst_valid_beg 20190112_000000
> -fcst_valid_end 20190112_000000 -by desc -by FCST_THRESH -by
FCST_LEAD
> -dump_row /h/data/global/WXQC/data/met/filter_job"
>
> DEBUG 2:
>
> DEBUG 2: Processing Job 1: -job aggregate_stat -fcst_valid_beg
> 20190112_000000 -fcst_valid_end 20190112_000000 -line_type MPR -by
DESC
> -by FCST_THRESH -by FCST_LEAD -dump_row
> /h/data/global/WXQC/data/met/filter_job
> -out_line_type CTS -out_alpha 0.05000 -boot_interval 1
-boot_rep_prop
> 1.00000 -n_boot_rep 1000 -boot_rng mt19937 -boot_seed ''
>
> DEBUG 1: Creating dump row output file
> "/h/data/global/WXQC/data/met/filter_job"
>
> GSL_RNG_TYPE=mt19937
>
> GSL_RNG_SEED=18446744072848627804
>
> DEBUG 2: Computing output for 1 case(s).
>
> ERROR :
>
> ERROR : ThreshArray::operator[](int) const -> range check error!
>
> ERROR :
>
>
>
> I know we have seen this before but don't remember what triggers it.
It
> would be a nice addition to the users manual to explain possible
causes
> for errors like this. Attached is the MPR file I am reading.
>
>
>
> Thanks
>
> Bob
>
>
>
>
>
>
>
>
>
------------------------------------------------
Subject: RE: FW: [Non-DoD Source] [rt.rap.ucar.edu #88776] AutoReply: Range Check Error in Stat Analysis
From: robert.craig.2 at us.af.mil
Time: Wed Feb 06 10:41:30 2019
John, for the range error, I attached the data file to the email so
you should have it. The ARL safe stuff was for a previous issue.
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Wednesday, February 6, 2019 11:20 AM
To: CRAIG, ROBERT J GS-12 USAF ACC 16 WS/WXN
<robert.craig.2 at us.af.mil>
Subject: Re: FW: [Non-DoD Source] [rt.rap.ucar.edu #88776] AutoReply:
Range Check Error in Stat Analysis
Bob,
OK, I did receive the ARL Safe email with your data, but didn't have
time to go grab it over the last couple of days during the METplus
tutorial. I went to go grab it just now but found that the link
expired after 14 hours. I'm surprised that it's so quick.
Anyway, glad you found a workaround. I would've preferred to figure
it out and give you a definitive answer.
But please let me know what other issues your run into.
Thanks,
John
On Tue, Feb 5, 2019 at 2:42 PM robert.craig.2 at us.af.mil via RT <
met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=88776 >
>
> John, found a work around.
>
> Bob
>
> -----Original Message-----
> From: met_help at ucar.edu via RT <met_help at ucar.edu>
> Sent: Monday, February 4, 2019 3:56 PM
> To: CRAIG, ROBERT J GS-12 USAF ACC 16 WS/WXN
> <robert.craig.2 at us.af.mil>
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #88776] AutoReply: Range
> Check Error in Stat Analysis
>
> Greetings,
>
> This message has been automatically generated in response to the
> creation of a trouble ticket regarding:
> "Range Check Error in Stat Analysis",
> a summary of which appears below.
>
> There is no need to reply to this message right now. Your ticket
has
> been assigned an ID of [rt.rap.ucar.edu #88776].
>
> Please include the string:
>
> [rt.rap.ucar.edu #88776]
>
> in the subject line of all future correspondence about this issue.
To
> do so, you may reply to this message.
>
> For more information, please see:
>
> MET Online Tutorial:
>
> https://www.dtcenter.org/met/users/support/online_tutorial/index.php
>
> MET Users Guide:
> https://www.dtcenter.org/met/users/docs/overview.php
>
> MET FAQs:
> https://www.dtcenter.org/met/users/support/faqs/index.php
>
> MET-Help Email Archive:
> http://mailman.ucar.edu/pipermail/met_help
>
> Thank you,
> met_help at ucar.edu
>
>
----------------------------------------------------------------------
> --- John, I am running stat analysis on some point stat (not hira)
> files and looking to get CTS results for precip type. Precip type
> ranges from 0-7 in my model and observation files. Then I run the
> code I get:
>
>
>
> DEBUG 3: Processing STAT file
>
>
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat
> _galwe mf_all_150000L_20190115_150000V.stat" ... 81 of 84
>
> DEBUG 3: Processing STAT file
>
>
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat
> _galwe mf_all_270000L_20190115_030000V.stat" ... 82 of 84
>
> DEBUG 3: Processing STAT file
>
>
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat
> _galwe mf_all_210000L_20190112_210000V.stat" ... 83 of 84
>
> DEBUG 3: Processing STAT file
>
>
"/h/data/global/WXQC/data/met/ptstat/mdlob_pairs/galwemf/PT/point_stat
> _galwe mf_all_330000L_20190114_090000V.stat" ... 84 of 84
>
> DEBUG 2: STAT Lines read = 186613
>
> DEBUG 2: STAT Lines retained = 2298
>
> DEBUG 4:
>
> DEBUG 4: Initializing Job 1 to default job: "-job aggregate_stat
> -fcst_valid_beg 20190112_000000 -fcst_valid_end 20190112_000000
> -line_type MPR -by DESC -by FCST_THRESH -by FCST_LEAD -dump_row
> /h/data/global/WXQC/data/met/filter_job -out_line_type CTS
-out_alpha
> 0.05000 -boot_interval 1 -boot_rep_prop 1.00000 -n_boot_rep 1000
> -boot_rng
> mt19937 -boot_seed '' "
>
> DEBUG 4:
>
> DEBUG 4: Amending Job 1 with options: "-job aggregate_stat
-line_type
> MPR -out_line_type CTS -fcst_valid_beg 20190112_000000
-fcst_valid_end
> 20190112_000000 -by desc -by FCST_THRESH -by FCST_LEAD -dump_row
> /h/data/global/WXQC/data/met/filter_job"
>
> DEBUG 4:
>
> DEBUG 4: Amending Job 1 with command line options: "-job
> aggregate_stat -line_type MPR -out_line_type CTS -fcst_valid_beg
> 20190112_000000 -fcst_valid_end 20190112_000000 -by desc -by
> FCST_THRESH -by FCST_LEAD -dump_row
/h/data/global/WXQC/data/met/filter_job"
>
> DEBUG 2:
>
> DEBUG 2: Processing Job 1: -job aggregate_stat -fcst_valid_beg
> 20190112_000000 -fcst_valid_end 20190112_000000 -line_type MPR -by
> DESC -by FCST_THRESH -by FCST_LEAD -dump_row
> /h/data/global/WXQC/data/met/filter_job
> -out_line_type CTS -out_alpha 0.05000 -boot_interval 1
-boot_rep_prop
> 1.00000 -n_boot_rep 1000 -boot_rng mt19937 -boot_seed ''
>
> DEBUG 1: Creating dump row output file
> "/h/data/global/WXQC/data/met/filter_job"
>
> GSL_RNG_TYPE=mt19937
>
> GSL_RNG_SEED=18446744072848627804
>
> DEBUG 2: Computing output for 1 case(s).
>
> ERROR :
>
> ERROR : ThreshArray::operator[](int) const -> range check error!
>
> ERROR :
>
>
>
> I know we have seen this before but don't remember what triggers it.
> It would be a nice addition to the users manual to explain possible
> causes for errors like this. Attached is the MPR file I am reading.
>
>
>
> Thanks
>
> Bob
>
>
>
>
>
>
>
>
>
------------------------------------------------
Subject: Range Check Error in Stat Analysis
From: John Halley Gotway
Time: Wed Feb 06 12:01:34 2019
Bob,
Sorry for not seeing that attachment. I was able to replicate this
behavior using met-6.1... but with met-8.0, it does result in a useful
error message as we'd like.
Here's the problem.... when running aggregate_stat to read MPR and
write
CTS, you need to define the output threshold for the contingency table
you'd like. Here's the met-8.0 error message:
stat_analysis -lookin
point_stat_galwemf_all_120000L_20190111_120000V_mpr.txt -job
aggregate_stat
-line_type MPR -by DESC -by FCST_THRESH -by FCST_LEAD -out_line_type
CTS
ERROR : do_job_aggr_stat() -> when "-out_line_type" is set to FHO,
CTC,
CTS, or ECLV, the "-out_thresh" option or "-out_fcst_thresh" and
"-out_obs_thresh" options must specify exactly one threshold.
This is fixed by defining the output threshold, like this (use
whatever
threshold you'd like):
stat_analysis -lookin
point_stat_galwemf_all_120000L_20190111_120000V_mpr.txt -job
aggregate_stat
-line_type MPR -by DESC -by FCST_THRESH -by FCST_LEAD -out_line_type
CTS
-out_thresh gt0
Make sense?
Thanks,
John
On Wed, Feb 6, 2019 at 10:19 AM The RT System itself via RT <
met_help at ucar.edu> wrote:
>
> Wed Feb 06 10:19:30 2019: Request 88776 was acted upon.
> Transaction: Given to johnhg (John Halley Gotway) by RT_System
> Queue: met_help
> Subject: Range Check Error in Stat Analysis
> Owner: johnhg
> Requestors: robert.craig.2 at us.af.mil
> Status: resolved
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=88776 >
>
>
> This transaction appears to have no content
>
------------------------------------------------
Subject: RE: [Non-DoD Source] Re: [rt.rap.ucar.edu #88776] Range Check Error in Stat Analysis
From: robert.craig.2 at us.af.mil
Time: Wed Feb 06 12:06:03 2019
Yes, thanks.
-----Original Message-----
From: John Halley Gotway via RT <met_help at ucar.edu>
Sent: Wednesday, February 6, 2019 1:02 PM
To: CRAIG, ROBERT J GS-12 USAF ACC 16 WS/WXN
<robert.craig.2 at us.af.mil>
Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #88776] Range Check
Error in Stat Analysis
Bob,
Sorry for not seeing that attachment. I was able to replicate this
behavior using met-6.1... but with met-8.0, it does result in a useful
error message as we'd like.
Here's the problem.... when running aggregate_stat to read MPR and
write CTS, you need to define the output threshold for the contingency
table you'd like. Here's the met-8.0 error message:
stat_analysis -lookin
point_stat_galwemf_all_120000L_20190111_120000V_mpr.txt -job
aggregate_stat -line_type MPR -by DESC -by FCST_THRESH -by FCST_LEAD
-out_line_type CTS
ERROR : do_job_aggr_stat() -> when "-out_line_type" is set to FHO,
CTC, CTS, or ECLV, the "-out_thresh" option or "-out_fcst_thresh" and
"-out_obs_thresh" options must specify exactly one threshold.
This is fixed by defining the output threshold, like this (use
whatever threshold you'd like):
stat_analysis -lookin
point_stat_galwemf_all_120000L_20190111_120000V_mpr.txt -job
aggregate_stat -line_type MPR -by DESC -by FCST_THRESH -by FCST_LEAD
-out_line_type CTS -out_thresh gt0
Make sense?
Thanks,
John
On Wed, Feb 6, 2019 at 10:19 AM The RT System itself via RT <
met_help at ucar.edu> wrote:
>
> Wed Feb 06 10:19:30 2019: Request 88776 was acted upon.
> Transaction: Given to johnhg (John Halley Gotway) by RT_System
> Queue: met_help
> Subject: Range Check Error in Stat Analysis
> Owner: johnhg
> Requestors: robert.craig.2 at us.af.mil
> Status: resolved
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=88776
> >
>
>
> This transaction appears to have no content
>
------------------------------------------------
More information about the Met_help
mailing list