[Met_help] [rt.rap.ucar.edu #81661] History for Files work in mode 5.2, but not in mode 6.0
John Halley Gotway via RT
met_help at ucar.edu
Tue Aug 22 13:07:08 MDT 2017
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
Hi:
I have some files (netCDF, polar stereographic grid) that ran successfully
in mode 5.2, but they don't seem to work in 6.0. I changed nothing in the
file or in the param file, except to make the version 6.0. The error I get
is:
ERROR :
ERROR : MetNcFile::data(NcVar *, const LongArray &, DataPlane &) const ->
star found in bad slot
ERROR :
Is there a way around this?
Thanks,
Tina
--
*************************************************
Christina Kalb
Associate Scientist
National Center for Atmospheric Research
3450 Mitchell Lane
Boulder, CO 80301
email: kalb at ucar.edu
*************************************************
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: Files work in mode 5.2, but not in mode 6.0
From: Julie Prestopnik
Time: Fri Aug 18 09:24:58 2017
Hi Tina.
Please post the data (fcst, obs, and config) that you used for the
mode run
file to our anonymous ftp site following these instructions:
http://www.dtcenter.org/met/users/support/met_help.php#ftp
or you can just put them on scratch.
Also, please let us know the last set of patches that have been
applied to
your version of met-5.2 and met-6.0.
Thanks,
Julie
On Thu, Aug 17, 2017 at 4:06 PM, Christina Kalb via RT
<met_help at ucar.edu>
wrote:
>
> Thu Aug 17 16:06:31 2017: Request 81661 was acted upon.
> Transaction: Ticket created by kalb
> Queue: met_help
> Subject: Files work in mode 5.2, but not in mode 6.0
> Owner: Nobody
> Requestors: kalb at ucar.edu
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661 >
>
>
> Hi:
>
> I have some files (netCDF, polar stereographic grid) that ran
successfully
> in mode 5.2, but they don't seem to work in 6.0. I changed nothing
in the
> file or in the param file, except to make the version 6.0. The
error I get
> is:
>
> ERROR :
> ERROR : MetNcFile::data(NcVar *, const LongArray &, DataPlane &)
const ->
> star found in bad slot
> ERROR :
>
> Is there a way around this?
>
> Thanks,
> Tina
>
> --
> *************************************************
> Christina Kalb
> Associate Scientist
> National Center for Atmospheric Research
> 3450 Mitchell Lane
> Boulder, CO 80301
> email: kalb at ucar.edu
> *************************************************
>
>
------------------------------------------------
Subject: Files work in mode 5.2, but not in mode 6.0
From: Christina Kalb
Time: Fri Aug 18 12:09:14 2017
Hi Julie:
How do I check to see what set of patches have been applied to my met
5.2
and 6.0? I'm running the mode installed here:
/usr/local/met-6.0/bin/mode
/usr/local/met-5.2/bin/mode
I put my data and config file on /scratch/WEEKLY/Tina/met
Let me know what other information you need!
Tina
On Fri, Aug 18, 2017 at 9:24 AM, Julie Prestopnik via RT
<met_help at ucar.edu>
wrote:
> Hi Tina.
>
> Please post the data (fcst, obs, and config) that you used for the
mode run
> file to our anonymous ftp site following these instructions:
>
> http://www.dtcenter.org/met/users/support/met_help.php#ftp
>
> or you can just put them on scratch.
>
> Also, please let us know the last set of patches that have been
applied to
> your version of met-5.2 and met-6.0.
>
> Thanks,
> Julie
>
> On Thu, Aug 17, 2017 at 4:06 PM, Christina Kalb via RT
<met_help at ucar.edu>
> wrote:
>
> >
> > Thu Aug 17 16:06:31 2017: Request 81661 was acted upon.
> > Transaction: Ticket created by kalb
> > Queue: met_help
> > Subject: Files work in mode 5.2, but not in mode 6.0
> > Owner: Nobody
> > Requestors: kalb at ucar.edu
> > Status: new
> > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661 >
> >
> >
> > Hi:
> >
> > I have some files (netCDF, polar stereographic grid) that ran
> successfully
> > in mode 5.2, but they don't seem to work in 6.0. I changed
nothing in
> the
> > file or in the param file, except to make the version 6.0. The
error I
> get
> > is:
> >
> > ERROR :
> > ERROR : MetNcFile::data(NcVar *, const LongArray &, DataPlane &)
const
> ->
> > star found in bad slot
> > ERROR :
> >
> > Is there a way around this?
> >
> > Thanks,
> > Tina
> >
> > --
> > *************************************************
> > Christina Kalb
> > Associate Scientist
> > National Center for Atmospheric Research
> > 3450 Mitchell Lane
> > Boulder, CO 80301
> > email: kalb at ucar.edu
> > *************************************************
> >
> >
>
>
--
*************************************************
Christina Kalb
Associate Scientist
National Center for Atmospheric Research
3450 Mitchell Lane
Boulder, CO 80301
email: kalb at ucar.edu
*************************************************
------------------------------------------------
Subject: Files work in mode 5.2, but not in mode 6.0
From: Julie Prestopnik
Time: Fri Aug 18 14:49:54 2017
Hi Tina.
Thank you! It looks like this is a known bug in met-6.0 and was fixed
with
the patches on April 19, 2017. So, you would need to run a more
current
version on met-6.0 to be able to use met-6.0. I'll see what we can do
to
get that updated in /usr/local/.
Thanks,
Julie
On Fri, Aug 18, 2017 at 12:09 PM, Christina Kalb via RT
<met_help at ucar.edu>
wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661 >
>
> Hi Julie:
>
> How do I check to see what set of patches have been applied to my
met 5.2
> and 6.0? I'm running the mode installed here:
> /usr/local/met-6.0/bin/mode
> /usr/local/met-5.2/bin/mode
>
> I put my data and config file on /scratch/WEEKLY/Tina/met
>
> Let me know what other information you need!
>
> Tina
>
> On Fri, Aug 18, 2017 at 9:24 AM, Julie Prestopnik via RT <
> met_help at ucar.edu>
> wrote:
>
> > Hi Tina.
> >
> > Please post the data (fcst, obs, and config) that you used for the
mode
> run
> > file to our anonymous ftp site following these instructions:
> >
> > http://www.dtcenter.org/met/users/support/met_help.php#ftp
> >
> > or you can just put them on scratch.
> >
> > Also, please let us know the last set of patches that have been
applied
> to
> > your version of met-5.2 and met-6.0.
> >
> > Thanks,
> > Julie
> >
> > On Thu, Aug 17, 2017 at 4:06 PM, Christina Kalb via RT <
> met_help at ucar.edu>
> > wrote:
> >
> > >
> > > Thu Aug 17 16:06:31 2017: Request 81661 was acted upon.
> > > Transaction: Ticket created by kalb
> > > Queue: met_help
> > > Subject: Files work in mode 5.2, but not in mode 6.0
> > > Owner: Nobody
> > > Requestors: kalb at ucar.edu
> > > Status: new
> > > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661
> >
> > >
> > >
> > > Hi:
> > >
> > > I have some files (netCDF, polar stereographic grid) that ran
> > successfully
> > > in mode 5.2, but they don't seem to work in 6.0. I changed
nothing in
> > the
> > > file or in the param file, except to make the version 6.0. The
error I
> > get
> > > is:
> > >
> > > ERROR :
> > > ERROR : MetNcFile::data(NcVar *, const LongArray &, DataPlane
&) const
> > ->
> > > star found in bad slot
> > > ERROR :
> > >
> > > Is there a way around this?
> > >
> > > Thanks,
> > > Tina
> > >
> > > --
> > > *************************************************
> > > Christina Kalb
> > > Associate Scientist
> > > National Center for Atmospheric Research
> > > 3450 Mitchell Lane
> > > Boulder, CO 80301
> > > email: kalb at ucar.edu
> > > *************************************************
> > >
> > >
> >
> >
>
>
> --
> *************************************************
> Christina Kalb
> Associate Scientist
> National Center for Atmospheric Research
> 3450 Mitchell Lane
> Boulder, CO 80301
> email: kalb at ucar.edu
> *************************************************
>
>
------------------------------------------------
Subject: Files work in mode 5.2, but not in mode 6.0
From: John Halley Gotway
Time: Fri Aug 18 15:07:21 2017
Tina and Julie,
This actually raises a really good point. How do you know what patch
level
has been applied? Each time a patch is applied the first few lines of
the
top-level README file are updated. They look something like this:
++++++++++++++++++++++++++++++++++++++++++++
Repository:
https://svn-met-dev.cgd.ucar.edu/branches/met/met-6.0_bugfix
Revision: 4757
Change Date: 2017-07-21 12:35:05 -0600 (Fri, 21 Jul 2017)
Model Evaluation Tools METv6.0 (April 2017)
++++++++++++++++++++++++++++++++++++++++++++
However that README file isn't one of the distribution files included
in
/usr/local/met-6.0/share/met. So there's really currently no way for
Tina
to know.
We should fix this.
I can think of a couple of options:
(1) Add a 3rd decimal place to the released version number and update
it
every time we post a patch. Seems a little annoying then that you
might
have "6.0.1" output and "6.0.4" output depending on the version.
(2) Or we could make the executables smart enough to dump out the
latest
patch date when you run them with no arguments. Add that patch date
info:
[johnhg at number5]%
grid_stat
*** Model Evaluation Tools (METV6.1) (patch date 2017-07-21)
***
Usage:
grid_stat
fcst_file
obs_file
config_file
[-outdir path]
[-log file]
[-v level]
[-compress level]
What do you guys think?
Thanks,
John
On Fri, Aug 18, 2017 at 2:49 PM, Julie Prestopnik via RT
<met_help at ucar.edu>
wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661 >
>
> Hi Tina.
>
> Thank you! It looks like this is a known bug in met-6.0 and was
fixed with
> the patches on April 19, 2017. So, you would need to run a more
current
> version on met-6.0 to be able to use met-6.0. I'll see what we can
do to
> get that updated in /usr/local/.
>
> Thanks,
> Julie
>
> On Fri, Aug 18, 2017 at 12:09 PM, Christina Kalb via RT
<met_help at ucar.edu
> >
> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661 >
> >
> > Hi Julie:
> >
> > How do I check to see what set of patches have been applied to my
met 5.2
> > and 6.0? I'm running the mode installed here:
> > /usr/local/met-6.0/bin/mode
> > /usr/local/met-5.2/bin/mode
> >
> > I put my data and config file on /scratch/WEEKLY/Tina/met
> >
> > Let me know what other information you need!
> >
> > Tina
> >
> > On Fri, Aug 18, 2017 at 9:24 AM, Julie Prestopnik via RT <
> > met_help at ucar.edu>
> > wrote:
> >
> > > Hi Tina.
> > >
> > > Please post the data (fcst, obs, and config) that you used for
the mode
> > run
> > > file to our anonymous ftp site following these instructions:
> > >
> > > http://www.dtcenter.org/met/users/support/met_help.php#ftp
> > >
> > > or you can just put them on scratch.
> > >
> > > Also, please let us know the last set of patches that have been
applied
> > to
> > > your version of met-5.2 and met-6.0.
> > >
> > > Thanks,
> > > Julie
> > >
> > > On Thu, Aug 17, 2017 at 4:06 PM, Christina Kalb via RT <
> > met_help at ucar.edu>
> > > wrote:
> > >
> > > >
> > > > Thu Aug 17 16:06:31 2017: Request 81661 was acted upon.
> > > > Transaction: Ticket created by kalb
> > > > Queue: met_help
> > > > Subject: Files work in mode 5.2, but not in mode 6.0
> > > > Owner: Nobody
> > > > Requestors: kalb at ucar.edu
> > > > Status: new
> > > > Ticket <URL: https://rt.rap.ucar.edu/rt/
> Ticket/Display.html?id=81661
> > >
> > > >
> > > >
> > > > Hi:
> > > >
> > > > I have some files (netCDF, polar stereographic grid) that ran
> > > successfully
> > > > in mode 5.2, but they don't seem to work in 6.0. I changed
nothing
> in
> > > the
> > > > file or in the param file, except to make the version 6.0.
The
> error I
> > > get
> > > > is:
> > > >
> > > > ERROR :
> > > > ERROR : MetNcFile::data(NcVar *, const LongArray &, DataPlane
&)
> const
> > > ->
> > > > star found in bad slot
> > > > ERROR :
> > > >
> > > > Is there a way around this?
> > > >
> > > > Thanks,
> > > > Tina
> > > >
> > > > --
> > > > *************************************************
> > > > Christina Kalb
> > > > Associate Scientist
> > > > National Center for Atmospheric Research
> > > > 3450 Mitchell Lane
> > > > Boulder, CO 80301
> > > > email: kalb at ucar.edu
> > > > *************************************************
> > > >
> > > >
> > >
> > >
> >
> >
> > --
> > *************************************************
> > Christina Kalb
> > Associate Scientist
> > National Center for Atmospheric Research
> > 3450 Mitchell Lane
> > Boulder, CO 80301
> > email: kalb at ucar.edu
> > *************************************************
> >
> >
>
>
------------------------------------------------
Subject: Files work in mode 5.2, but not in mode 6.0
From: John Halley Gotway
Time: Tue Aug 22 09:31:25 2017
Tina,
Please retry the problematic commands using the newly patched version
of
MET available in:
/usr/local/met-6.0/bin
Hopefully that'll solve the issues you found.
Thanks,
John
On Fri, Aug 18, 2017 at 3:06 PM, John Halley Gotway <johnhg at ucar.edu>
wrote:
> Tina and Julie,
>
> This actually raises a really good point. How do you know what
patch
> level has been applied? Each time a patch is applied the first few
lines
> of the top-level README file are updated. They look something like
this:
>
> ++++++++++++++++++++++++++++++++++++++++++++
> Repository: https://svn-met-dev.cgd.ucar.edu/branches/met/met-
6.0_
> bugfix
> Revision: 4757
> Change Date: 2017-07-21 12:35:05 -0600 (Fri, 21 Jul 2017)
>
> Model Evaluation Tools METv6.0 (April 2017)
> ++++++++++++++++++++++++++++++++++++++++++++
>
> However that README file isn't one of the distribution files
included in
> /usr/local/met-6.0/share/met. So there's really currently no way
for Tina
> to know.
>
> We should fix this.
>
> I can think of a couple of options:
> (1) Add a 3rd decimal place to the released version number and
update it
> every time we post a patch. Seems a little annoying then that you
might
> have "6.0.1" output and "6.0.4" output depending on the version.
>
> (2) Or we could make the executables smart enough to dump out the
latest
> patch date when you run them with no arguments. Add that patch date
info:
>
> [johnhg at number5]% grid_stat
>
>
>
>
> *** Model Evaluation Tools (METV6.1) (patch date 2017-07-21)
> ***
>
>
> Usage: grid_stat
>
> fcst_file
>
> obs_file
>
> config_file
>
> [-outdir path]
> [-log file]
> [-v level]
> [-compress level]
>
>
> What do you guys think?
>
> Thanks,
> John
>
> On Fri, Aug 18, 2017 at 2:49 PM, Julie Prestopnik via RT <
> met_help at ucar.edu> wrote:
>
>>
>> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661 >
>>
>> Hi Tina.
>>
>> Thank you! It looks like this is a known bug in met-6.0 and was
fixed
>> with
>> the patches on April 19, 2017. So, you would need to run a more
current
>> version on met-6.0 to be able to use met-6.0. I'll see what we can
do to
>> get that updated in /usr/local/.
>>
>> Thanks,
>> Julie
>>
>> On Fri, Aug 18, 2017 at 12:09 PM, Christina Kalb via RT <
>> met_help at ucar.edu>
>> wrote:
>>
>> >
>> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661 >
>> >
>> > Hi Julie:
>> >
>> > How do I check to see what set of patches have been applied to my
met
>> 5.2
>> > and 6.0? I'm running the mode installed here:
>> > /usr/local/met-6.0/bin/mode
>> > /usr/local/met-5.2/bin/mode
>> >
>> > I put my data and config file on /scratch/WEEKLY/Tina/met
>> >
>> > Let me know what other information you need!
>> >
>> > Tina
>> >
>> > On Fri, Aug 18, 2017 at 9:24 AM, Julie Prestopnik via RT <
>> > met_help at ucar.edu>
>> > wrote:
>> >
>> > > Hi Tina.
>> > >
>> > > Please post the data (fcst, obs, and config) that you used for
the
>> mode
>> > run
>> > > file to our anonymous ftp site following these instructions:
>> > >
>> > > http://www.dtcenter.org/met/users/support/met_help.php#ftp
>> > >
>> > > or you can just put them on scratch.
>> > >
>> > > Also, please let us know the last set of patches that have been
>> applied
>> > to
>> > > your version of met-5.2 and met-6.0.
>> > >
>> > > Thanks,
>> > > Julie
>> > >
>> > > On Thu, Aug 17, 2017 at 4:06 PM, Christina Kalb via RT <
>> > met_help at ucar.edu>
>> > > wrote:
>> > >
>> > > >
>> > > > Thu Aug 17 16:06:31 2017: Request 81661 was acted upon.
>> > > > Transaction: Ticket created by kalb
>> > > > Queue: met_help
>> > > > Subject: Files work in mode 5.2, but not in mode 6.0
>> > > > Owner: Nobody
>> > > > Requestors: kalb at ucar.edu
>> > > > Status: new
>> > > > Ticket <URL: https://rt.rap.ucar.edu/rt/Tic
>> ket/Display.html?id=81661
>> > >
>> > > >
>> > > >
>> > > > Hi:
>> > > >
>> > > > I have some files (netCDF, polar stereographic grid) that ran
>> > > successfully
>> > > > in mode 5.2, but they don't seem to work in 6.0. I changed
nothing
>> in
>> > > the
>> > > > file or in the param file, except to make the version 6.0.
The
>> error I
>> > > get
>> > > > is:
>> > > >
>> > > > ERROR :
>> > > > ERROR : MetNcFile::data(NcVar *, const LongArray &,
DataPlane &)
>> const
>> > > ->
>> > > > star found in bad slot
>> > > > ERROR :
>> > > >
>> > > > Is there a way around this?
>> > > >
>> > > > Thanks,
>> > > > Tina
>> > > >
>> > > > --
>> > > > *************************************************
>> > > > Christina Kalb
>> > > > Associate Scientist
>> > > > National Center for Atmospheric Research
>> > > > 3450 Mitchell Lane
>> > > > Boulder, CO 80301
>> > > > email: kalb at ucar.edu
>> > > > *************************************************
>> > > >
>> > > >
>> > >
>> > >
>> >
>> >
>> > --
>> > *************************************************
>> > Christina Kalb
>> > Associate Scientist
>> > National Center for Atmospheric Research
>> > 3450 Mitchell Lane
>> > Boulder, CO 80301
>> > email: kalb at ucar.edu
>> > *************************************************
>> >
>> >
>>
>>
>
------------------------------------------------
Subject: Files work in mode 5.2, but not in mode 6.0
From: Christina Kalb
Time: Tue Aug 22 11:41:52 2017
Hi John:
Thanks. I'm trying now and I'll let you know!
Tina
On Tue, Aug 22, 2017 at 9:31 AM, John Halley Gotway via RT <
met_help at ucar.edu> wrote:
> Tina,
>
> Please retry the problematic commands using the newly patched
version of
> MET available in:
> /usr/local/met-6.0/bin
>
> Hopefully that'll solve the issues you found.
>
> Thanks,
> John
>
> On Fri, Aug 18, 2017 at 3:06 PM, John Halley Gotway
<johnhg at ucar.edu>
> wrote:
>
> > Tina and Julie,
> >
> > This actually raises a really good point. How do you know what
patch
> > level has been applied? Each time a patch is applied the first
few lines
> > of the top-level README file are updated. They look something
like this:
> >
> > ++++++++++++++++++++++++++++++++++++++++++++
> > Repository: https://svn-met-
dev.cgd.ucar.edu/branches/met/met-6.0_
> > bugfix
> > Revision: 4757
> > Change Date: 2017-07-21 12:35:05 -0600 (Fri, 21 Jul 2017)
> >
> > Model Evaluation Tools METv6.0 (April 2017)
> > ++++++++++++++++++++++++++++++++++++++++++++
> >
> > However that README file isn't one of the distribution files
included in
> > /usr/local/met-6.0/share/met. So there's really currently no way
for
> Tina
> > to know.
> >
> > We should fix this.
> >
> > I can think of a couple of options:
> > (1) Add a 3rd decimal place to the released version number and
update it
> > every time we post a patch. Seems a little annoying then that you
might
> > have "6.0.1" output and "6.0.4" output depending on the version.
> >
> > (2) Or we could make the executables smart enough to dump out the
latest
> > patch date when you run them with no arguments. Add that patch
date
> info:
> >
> > [johnhg at number5]% grid_stat
> >
> >
> >
> >
> > *** Model Evaluation Tools (METV6.1) (patch date 2017-07-21)
> > ***
> >
> >
> > Usage: grid_stat
> >
> > fcst_file
> >
> > obs_file
> >
> > config_file
> >
> > [-outdir path]
> > [-log file]
> > [-v level]
> > [-compress level]
> >
> >
> > What do you guys think?
> >
> > Thanks,
> > John
> >
> > On Fri, Aug 18, 2017 at 2:49 PM, Julie Prestopnik via RT <
> > met_help at ucar.edu> wrote:
> >
> >>
> >> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661 >
> >>
> >> Hi Tina.
> >>
> >> Thank you! It looks like this is a known bug in met-6.0 and was
fixed
> >> with
> >> the patches on April 19, 2017. So, you would need to run a more
current
> >> version on met-6.0 to be able to use met-6.0. I'll see what we
can do
> to
> >> get that updated in /usr/local/.
> >>
> >> Thanks,
> >> Julie
> >>
> >> On Fri, Aug 18, 2017 at 12:09 PM, Christina Kalb via RT <
> >> met_help at ucar.edu>
> >> wrote:
> >>
> >> >
> >> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661 >
> >> >
> >> > Hi Julie:
> >> >
> >> > How do I check to see what set of patches have been applied to
my met
> >> 5.2
> >> > and 6.0? I'm running the mode installed here:
> >> > /usr/local/met-6.0/bin/mode
> >> > /usr/local/met-5.2/bin/mode
> >> >
> >> > I put my data and config file on /scratch/WEEKLY/Tina/met
> >> >
> >> > Let me know what other information you need!
> >> >
> >> > Tina
> >> >
> >> > On Fri, Aug 18, 2017 at 9:24 AM, Julie Prestopnik via RT <
> >> > met_help at ucar.edu>
> >> > wrote:
> >> >
> >> > > Hi Tina.
> >> > >
> >> > > Please post the data (fcst, obs, and config) that you used
for the
> >> mode
> >> > run
> >> > > file to our anonymous ftp site following these instructions:
> >> > >
> >> > > http://www.dtcenter.org/met/users/support/met_help.php#ftp
> >> > >
> >> > > or you can just put them on scratch.
> >> > >
> >> > > Also, please let us know the last set of patches that have
been
> >> applied
> >> > to
> >> > > your version of met-5.2 and met-6.0.
> >> > >
> >> > > Thanks,
> >> > > Julie
> >> > >
> >> > > On Thu, Aug 17, 2017 at 4:06 PM, Christina Kalb via RT <
> >> > met_help at ucar.edu>
> >> > > wrote:
> >> > >
> >> > > >
> >> > > > Thu Aug 17 16:06:31 2017: Request 81661 was acted upon.
> >> > > > Transaction: Ticket created by kalb
> >> > > > Queue: met_help
> >> > > > Subject: Files work in mode 5.2, but not in mode 6.0
> >> > > > Owner: Nobody
> >> > > > Requestors: kalb at ucar.edu
> >> > > > Status: new
> >> > > > Ticket <URL: https://rt.rap.ucar.edu/rt/Tic
> >> ket/Display.html?id=81661
> >> > >
> >> > > >
> >> > > >
> >> > > > Hi:
> >> > > >
> >> > > > I have some files (netCDF, polar stereographic grid) that
ran
> >> > > successfully
> >> > > > in mode 5.2, but they don't seem to work in 6.0. I changed
> nothing
> >> in
> >> > > the
> >> > > > file or in the param file, except to make the version 6.0.
The
> >> error I
> >> > > get
> >> > > > is:
> >> > > >
> >> > > > ERROR :
> >> > > > ERROR : MetNcFile::data(NcVar *, const LongArray &,
DataPlane &)
> >> const
> >> > > ->
> >> > > > star found in bad slot
> >> > > > ERROR :
> >> > > >
> >> > > > Is there a way around this?
> >> > > >
> >> > > > Thanks,
> >> > > > Tina
> >> > > >
> >> > > > --
> >> > > > *************************************************
> >> > > > Christina Kalb
> >> > > > Associate Scientist
> >> > > > National Center for Atmospheric Research
> >> > > > 3450 Mitchell Lane
> >> > > > Boulder, CO 80301
> >> > > > email: kalb at ucar.edu
> >> > > > *************************************************
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> >
> >> >
> >> > --
> >> > *************************************************
> >> > Christina Kalb
> >> > Associate Scientist
> >> > National Center for Atmospheric Research
> >> > 3450 Mitchell Lane
> >> > Boulder, CO 80301
> >> > email: kalb at ucar.edu
> >> > *************************************************
> >> >
> >> >
> >>
> >>
> >
>
>
--
*************************************************
Christina Kalb
Associate Scientist
National Center for Atmospheric Research
3450 Mitchell Lane
Boulder, CO 80301
email: kalb at ucar.edu
*************************************************
------------------------------------------------
Subject: Files work in mode 5.2, but not in mode 6.0
From: Christina Kalb
Time: Tue Aug 22 12:29:54 2017
Hi John:
Yep, they run through 6.0 now and the output looks good!
Thanks!
Tina
On Tue, Aug 22, 2017 at 11:41 AM, Christina Kalb <kalb at ucar.edu>
wrote:
> Hi John:
>
> Thanks. I'm trying now and I'll let you know!
>
> Tina
>
> On Tue, Aug 22, 2017 at 9:31 AM, John Halley Gotway via RT <
> met_help at ucar.edu> wrote:
>
>> Tina,
>>
>> Please retry the problematic commands using the newly patched
version of
>> MET available in:
>> /usr/local/met-6.0/bin
>>
>> Hopefully that'll solve the issues you found.
>>
>> Thanks,
>> John
>>
>> On Fri, Aug 18, 2017 at 3:06 PM, John Halley Gotway
<johnhg at ucar.edu>
>> wrote:
>>
>> > Tina and Julie,
>> >
>> > This actually raises a really good point. How do you know what
patch
>> > level has been applied? Each time a patch is applied the first
few
>> lines
>> > of the top-level README file are updated. They look something
like
>> this:
>> >
>> > ++++++++++++++++++++++++++++++++++++++++++++
>> > Repository: https://svn-met-
dev.cgd.ucar.edu/branches/met/met-6.0_
>> > bugfix
>> > Revision: 4757
>> > Change Date: 2017-07-21 12:35:05 -0600 (Fri, 21 Jul 2017)
>> >
>> > Model Evaluation Tools METv6.0 (April 2017)
>> > ++++++++++++++++++++++++++++++++++++++++++++
>> >
>> > However that README file isn't one of the distribution files
included in
>> > /usr/local/met-6.0/share/met. So there's really currently no way
for
>> Tina
>> > to know.
>> >
>> > We should fix this.
>> >
>> > I can think of a couple of options:
>> > (1) Add a 3rd decimal place to the released version number and
update it
>> > every time we post a patch. Seems a little annoying then that
you might
>> > have "6.0.1" output and "6.0.4" output depending on the version.
>> >
>> > (2) Or we could make the executables smart enough to dump out the
latest
>> > patch date when you run them with no arguments. Add that patch
date
>> info:
>> >
>> > [johnhg at number5]% grid_stat
>> >
>> >
>> >
>> >
>> > *** Model Evaluation Tools (METV6.1) (patch date 2017-07-21)
>> > ***
>> >
>> >
>> > Usage: grid_stat
>> >
>> > fcst_file
>> >
>> > obs_file
>> >
>> > config_file
>> >
>> > [-outdir path]
>> > [-log file]
>> > [-v level]
>> > [-compress level]
>> >
>> >
>> > What do you guys think?
>> >
>> > Thanks,
>> > John
>> >
>> > On Fri, Aug 18, 2017 at 2:49 PM, Julie Prestopnik via RT <
>> > met_help at ucar.edu> wrote:
>> >
>> >>
>> >> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661 >
>> >>
>> >> Hi Tina.
>> >>
>> >> Thank you! It looks like this is a known bug in met-6.0 and was
fixed
>> >> with
>> >> the patches on April 19, 2017. So, you would need to run a more
>> current
>> >> version on met-6.0 to be able to use met-6.0. I'll see what we
can do
>> to
>> >> get that updated in /usr/local/.
>> >>
>> >> Thanks,
>> >> Julie
>> >>
>> >> On Fri, Aug 18, 2017 at 12:09 PM, Christina Kalb via RT <
>> >> met_help at ucar.edu>
>> >> wrote:
>> >>
>> >> >
>> >> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=81661
>
>> >> >
>> >> > Hi Julie:
>> >> >
>> >> > How do I check to see what set of patches have been applied to
my met
>> >> 5.2
>> >> > and 6.0? I'm running the mode installed here:
>> >> > /usr/local/met-6.0/bin/mode
>> >> > /usr/local/met-5.2/bin/mode
>> >> >
>> >> > I put my data and config file on /scratch/WEEKLY/Tina/met
>> >> >
>> >> > Let me know what other information you need!
>> >> >
>> >> > Tina
>> >> >
>> >> > On Fri, Aug 18, 2017 at 9:24 AM, Julie Prestopnik via RT <
>> >> > met_help at ucar.edu>
>> >> > wrote:
>> >> >
>> >> > > Hi Tina.
>> >> > >
>> >> > > Please post the data (fcst, obs, and config) that you used
for the
>> >> mode
>> >> > run
>> >> > > file to our anonymous ftp site following these instructions:
>> >> > >
>> >> > > http://www.dtcenter.org/met/users/support/met_help.php#ftp
>> >> > >
>> >> > > or you can just put them on scratch.
>> >> > >
>> >> > > Also, please let us know the last set of patches that have
been
>> >> applied
>> >> > to
>> >> > > your version of met-5.2 and met-6.0.
>> >> > >
>> >> > > Thanks,
>> >> > > Julie
>> >> > >
>> >> > > On Thu, Aug 17, 2017 at 4:06 PM, Christina Kalb via RT <
>> >> > met_help at ucar.edu>
>> >> > > wrote:
>> >> > >
>> >> > > >
>> >> > > > Thu Aug 17 16:06:31 2017: Request 81661 was acted upon.
>> >> > > > Transaction: Ticket created by kalb
>> >> > > > Queue: met_help
>> >> > > > Subject: Files work in mode 5.2, but not in mode 6.0
>> >> > > > Owner: Nobody
>> >> > > > Requestors: kalb at ucar.edu
>> >> > > > Status: new
>> >> > > > Ticket <URL: https://rt.rap.ucar.edu/rt/Tic
>> >> ket/Display.html?id=81661
>> >> > >
>> >> > > >
>> >> > > >
>> >> > > > Hi:
>> >> > > >
>> >> > > > I have some files (netCDF, polar stereographic grid) that
ran
>> >> > > successfully
>> >> > > > in mode 5.2, but they don't seem to work in 6.0. I
changed
>> nothing
>> >> in
>> >> > > the
>> >> > > > file or in the param file, except to make the version 6.0.
The
>> >> error I
>> >> > > get
>> >> > > > is:
>> >> > > >
>> >> > > > ERROR :
>> >> > > > ERROR : MetNcFile::data(NcVar *, const LongArray &,
DataPlane &)
>> >> const
>> >> > > ->
>> >> > > > star found in bad slot
>> >> > > > ERROR :
>> >> > > >
>> >> > > > Is there a way around this?
>> >> > > >
>> >> > > > Thanks,
>> >> > > > Tina
>> >> > > >
>> >> > > > --
>> >> > > > *************************************************
>> >> > > > Christina Kalb
>> >> > > > Associate Scientist
>> >> > > > National Center for Atmospheric Research
>> >> > > > 3450 Mitchell Lane
>> >> > > > Boulder, CO 80301
>> >> > > > email: kalb at ucar.edu
>> >> > > > *************************************************
>> >> > > >
>> >> > > >
>> >> > >
>> >> > >
>> >> >
>> >> >
>> >> > --
>> >> > *************************************************
>> >> > Christina Kalb
>> >> > Associate Scientist
>> >> > National Center for Atmospheric Research
>> >> > 3450 Mitchell Lane
>> >> > Boulder, CO 80301
>> >> > email: kalb at ucar.edu
>> >> > *************************************************
>> >> >
>> >> >
>> >>
>> >>
>> >
>>
>>
>
>
> --
> *************************************************
> Christina Kalb
> Associate Scientist
> National Center for Atmospheric Research
> 3450 Mitchell Lane
> Boulder, CO 80301
> email: kalb at ucar.edu
> *************************************************
>
--
*************************************************
Christina Kalb
Associate Scientist
National Center for Atmospheric Research
3450 Mitchell Lane
Boulder, CO 80301
email: kalb at ucar.edu
*************************************************
------------------------------------------------
More information about the Met_help
mailing list