[Met_help] [rt.rap.ucar.edu #76009] History for MODE question
Julie Prestopnik via RT
met_help at ucar.edu
Thu Apr 21 10:41:31 MDT 2016
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
I'm trying to run MODE and am using NetCDF input files for both fcst and observation. The response I get is "Attribute not found". See the following dialog:
> mode ~/IDV/test_nc_output_contour_WREN_12Z_07FEB.nc ~/IDV/test_nc_output_contour_OBS_12Z_07FEB.nc
~/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
-outdir ~/MET_MODE/results_m3o3/20120207
-log ~/MET_MODE/logs/test -v 5
DEBUG 1: Default Config File: /home/rflaniga/opt/MET/MET_4.1_patch5/data/config/MODEConfig_default
DEBUG 1: Match Config File: /home/jraby/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
DEBUG 1: Merge Config File: /home/jraby/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
DEBUG 4: Met2dDataFileFactory::new_met_2d_data_file() -> created new Met2dDataFile object of type "FileType_NcMet".
NetCDF: Attribute not found
Does MODE accept NetCDF format?
Thanks.
R/
John
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: MODE question
From: Julie Prestopnik
Time: Thu Apr 21 09:28:47 2016
Hi John.
MODE can read either GRIB files or the NetCDF output of PCP-Combine,
but
not NetCDF in general.
I hope that helps!
Julie
On Wed, Apr 20, 2016 at 4:54 PM, Raby, John W USA CIV via RT <
met_help at ucar.edu> wrote:
>
> Wed Apr 20 16:54:24 2016: Request 76009 was acted upon.
> Transaction: Ticket created by john.w.raby2.civ at mail.mil
> Queue: met_help
> Subject: MODE question
> Owner: Nobody
> Requestors: john.w.raby2.civ at mail.mil
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=76009 >
>
>
> I'm trying to run MODE and am using NetCDF input files for both fcst
and
> observation. The response I get is "Attribute not found". See the
following
> dialog:
>
> > mode ~/IDV/test_nc_output_contour_WREN_12Z_07FEB.nc
> ~/IDV/test_nc_output_contour_OBS_12Z_07FEB.nc
> ~/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> -outdir ~/MET_MODE/results_m3o3/20120207
> -log ~/MET_MODE/logs/test -v 5
> DEBUG 1: Default Config File:
> /home/rflaniga/opt/MET/MET_4.1_patch5/data/config/MODEConfig_default
> DEBUG 1: Match Config File:
> /home/jraby/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> DEBUG 1: Merge Config File:
> /home/jraby/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> DEBUG 4: Met2dDataFileFactory::new_met_2d_data_file() -> created new
> Met2dDataFile object of type "FileType_NcMet".
> NetCDF: Attribute not found
>
> Does MODE accept NetCDF format?
>
> Thanks.
>
> R/
> John
>
>
--
Julie Prestopnik
National Center for Atmospheric Research
Research Applications Laboratory
Phone: 303.497.8399
Email: jpresto at ucar.edu
------------------------------------------------
Subject: RE: [Non-DoD Source] Re: [rt.rap.ucar.edu #76009] MODE question
From: Raby, John W USA CIV
Time: Thu Apr 21 10:19:16 2016
Julie -
I was beginning to suspect that not all NetCDF files are the
same.Those that are generated by the pcp_combine tool have some unique
feature which is expected by MODE and that this uniqueness is not
present in NetCDF files generated elsewhere.
I have another question about interpreting a graphics file I captured
from Series-Analysis output using plot_data-plane. If I sent it, could
you take a look?
Thanks.
R/
John
________________________________________
From: Julie Prestopnik via RT [met_help at ucar.edu]
Sent: Thursday, April 21, 2016 9:28 AM
To: Raby, John W CIV USARMY RDECOM ARL (US)
Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #76009] MODE question
All active links contained in this email were disabled. Please verify
the identity of the sender, and confirm the authenticity of all links
contained within the message prior to copying and pasting the address
to a Web browser.
----
Hi John.
MODE can read either GRIB files or the NetCDF output of PCP-Combine,
but
not NetCDF in general.
I hope that helps!
Julie
On Wed, Apr 20, 2016 at 4:54 PM, Raby, John W USA CIV via RT <
met_help at ucar.edu> wrote:
>
> Wed Apr 20 16:54:24 2016: Request 76009 was acted upon.
> Transaction: Ticket created by john.w.raby2.civ at mail.mil
> Queue: met_help
> Subject: MODE question
> Owner: Nobody
> Requestors: john.w.raby2.civ at mail.mil
> Status: new
> Ticket <Caution-url: Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=76009 >
>
>
> I'm trying to run MODE and am using NetCDF input files for both fcst
and
> observation. The response I get is "Attribute not found". See the
following
> dialog:
>
> > mode ~/IDV/test_nc_output_contour_WREN_12Z_07FEB.nc
> ~/IDV/test_nc_output_contour_OBS_12Z_07FEB.nc
> ~/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> -outdir ~/MET_MODE/results_m3o3/20120207
> -log ~/MET_MODE/logs/test -v 5
> DEBUG 1: Default Config File:
> /home/rflaniga/opt/MET/MET_4.1_patch5/data/config/MODEConfig_default
> DEBUG 1: Match Config File:
> /home/jraby/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> DEBUG 1: Merge Config File:
> /home/jraby/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> DEBUG 4: Met2dDataFileFactory::new_met_2d_data_file() -> created new
> Met2dDataFile object of type "FileType_NcMet".
> NetCDF: Attribute not found
>
> Does MODE accept NetCDF format?
>
> Thanks.
>
> R/
> John
>
>
--
Julie Prestopnik
National Center for Atmospheric Research
Research Applications Laboratory
Phone: 303.497.8399
Email: jpresto at ucar.edu
------------------------------------------------
Subject: MODE question
From: Julie Prestopnik
Time: Thu Apr 21 10:23:32 2016
Hi John.
Yes, please go ahead pass on the graphics file from the Series
Analysis
output using plot_data_plane. I'll go ahead and close this ticket.
Please
start another one with your question about the graphical data.
Thanks,
Julie
On Thu, Apr 21, 2016 at 10:19 AM, Raby, John W USA CIV via RT <
met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=76009 >
>
> Julie -
>
> I was beginning to suspect that not all NetCDF files are the
same.Those
> that are generated by the pcp_combine tool have some unique feature
which
> is expected by MODE and that this uniqueness is not present in
NetCDF files
> generated elsewhere.
>
> I have another question about interpreting a graphics file I
captured from
> Series-Analysis output using plot_data-plane. If I sent it, could
you take
> a look?
>
> Thanks.
>
> R/
> John
> ________________________________________
> From: Julie Prestopnik via RT [met_help at ucar.edu]
> Sent: Thursday, April 21, 2016 9:28 AM
> To: Raby, John W CIV USARMY RDECOM ARL (US)
> Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #76009] MODE question
>
> All active links contained in this email were disabled. Please
verify the
> identity of the sender, and confirm the authenticity of all links
contained
> within the message prior to copying and pasting the address to a Web
> browser.
>
>
>
>
> ----
>
> Hi John.
>
> MODE can read either GRIB files or the NetCDF output of PCP-Combine,
but
> not NetCDF in general.
>
> I hope that helps!
>
> Julie
>
> On Wed, Apr 20, 2016 at 4:54 PM, Raby, John W USA CIV via RT <
> met_help at ucar.edu> wrote:
>
> >
> > Wed Apr 20 16:54:24 2016: Request 76009 was acted upon.
> > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > Queue: met_help
> > Subject: MODE question
> > Owner: Nobody
> > Requestors: john.w.raby2.civ at mail.mil
> > Status: new
> > Ticket <Caution-url: Caution-
> https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=76009 >
> >
> >
> > I'm trying to run MODE and am using NetCDF input files for both
fcst and
> > observation. The response I get is "Attribute not found". See the
> following
> > dialog:
> >
> > > mode ~/IDV/test_nc_output_contour_WREN_12Z_07FEB.nc
> > ~/IDV/test_nc_output_contour_OBS_12Z_07FEB.nc
> > ~/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> > -outdir ~/MET_MODE/results_m3o3/20120207
> > -log ~/MET_MODE/logs/test -v 5
> > DEBUG 1: Default Config File:
> >
/home/rflaniga/opt/MET/MET_4.1_patch5/data/config/MODEConfig_default
> > DEBUG 1: Match Config File:
> > /home/jraby/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> > DEBUG 1: Merge Config File:
> > /home/jraby/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> > DEBUG 4: Met2dDataFileFactory::new_met_2d_data_file() -> created
new
> > Met2dDataFile object of type "FileType_NcMet".
> > NetCDF: Attribute not found
> >
> > Does MODE accept NetCDF format?
> >
> > Thanks.
> >
> > R/
> > John
> >
> >
>
>
> --
> Julie Prestopnik
> National Center for Atmospheric Research
> Research Applications Laboratory
> Phone: 303.497.8399
> Email: jpresto at ucar.edu
>
>
>
>
--
Julie Prestopnik
National Center for Atmospheric Research
Research Applications Laboratory
Phone: 303.497.8399
Email: jpresto at ucar.edu
------------------------------------------------
Subject: RE: [Non-DoD Source] Re: [rt.rap.ucar.edu #76009] MODE question
From: Raby, John W USA CIV
Time: Thu Apr 21 10:24:28 2016
OK. Thanks.
John
________________________________________
From: Julie Prestopnik via RT [met_help at ucar.edu]
Sent: Thursday, April 21, 2016 10:23 AM
To: Raby, John W CIV USARMY RDECOM ARL (US)
Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #76009] MODE
question
All active links contained in this email were disabled. Please verify
the identity of the sender, and confirm the authenticity of all links
contained within the message prior to copying and pasting the address
to a Web browser.
----
Hi John.
Yes, please go ahead pass on the graphics file from the Series
Analysis
output using plot_data_plane. I'll go ahead and close this ticket.
Please
start another one with your question about the graphical data.
Thanks,
Julie
On Thu, Apr 21, 2016 at 10:19 AM, Raby, John W USA CIV via RT <
met_help at ucar.edu> wrote:
>
> <Caution-url: Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=76009 >
>
> Julie -
>
> I was beginning to suspect that not all NetCDF files are the
same.Those
> that are generated by the pcp_combine tool have some unique feature
which
> is expected by MODE and that this uniqueness is not present in
NetCDF files
> generated elsewhere.
>
> I have another question about interpreting a graphics file I
captured from
> Series-Analysis output using plot_data-plane. If I sent it, could
you take
> a look?
>
> Thanks.
>
> R/
> John
> ________________________________________
> From: Julie Prestopnik via RT [met_help at ucar.edu]
> Sent: Thursday, April 21, 2016 9:28 AM
> To: Raby, John W CIV USARMY RDECOM ARL (US)
> Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #76009] MODE question
>
> All active links contained in this email were disabled. Please
verify the
> identity of the sender, and confirm the authenticity of all links
contained
> within the message prior to copying and pasting the address to a Web
> browser.
>
>
>
>
> ----
>
> Hi John.
>
> MODE can read either GRIB files or the NetCDF output of PCP-Combine,
but
> not NetCDF in general.
>
> I hope that helps!
>
> Julie
>
> On Wed, Apr 20, 2016 at 4:54 PM, Raby, John W USA CIV via RT <
> met_help at ucar.edu> wrote:
>
> >
> > Wed Apr 20 16:54:24 2016: Request 76009 was acted upon.
> > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > Queue: met_help
> > Subject: MODE question
> > Owner: Nobody
> > Requestors: john.w.raby2.civ at mail.mil
> > Status: new
> > Ticket <Caution-Caution-url: Caution-
> Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=76009 >
> >
> >
> > I'm trying to run MODE and am using NetCDF input files for both
fcst and
> > observation. The response I get is "Attribute not found". See the
> following
> > dialog:
> >
> > > mode ~/IDV/test_nc_output_contour_WREN_12Z_07FEB.nc
> > ~/IDV/test_nc_output_contour_OBS_12Z_07FEB.nc
> > ~/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> > -outdir ~/MET_MODE/results_m3o3/20120207
> > -log ~/MET_MODE/logs/test -v 5
> > DEBUG 1: Default Config File:
> >
/home/rflaniga/opt/MET/MET_4.1_patch5/data/config/MODEConfig_default
> > DEBUG 1: Match Config File:
> > /home/jraby/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> > DEBUG 1: Merge Config File:
> > /home/jraby/MET_MODE/WrfModeConfig_m3o3_gsdlaps_LAX_WIND
> > DEBUG 4: Met2dDataFileFactory::new_met_2d_data_file() -> created
new
> > Met2dDataFile object of type "FileType_NcMet".
> > NetCDF: Attribute not found
> >
> > Does MODE accept NetCDF format?
> >
> > Thanks.
> >
> > R/
> > John
> >
> >
>
>
> --
> Julie Prestopnik
> National Center for Atmospheric Research
> Research Applications Laboratory
> Phone: 303.497.8399
> Email: jpresto at ucar.edu
>
>
>
>
--
Julie Prestopnik
National Center for Atmospheric Research
Research Applications Laboratory
Phone: 303.497.8399
Email: jpresto at ucar.edu
------------------------------------------------
More information about the Met_help
mailing list