[Met_help] [rt.rap.ucar.edu #68582] History for MET ensemble_stat problems
John Halley Gotway via RT
met_help at ucar.edu
Fri Oct 3 12:27:46 MDT 2014
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
I am trying to use ensemble_stat for the first time and am having some
problems. My configuration is:
MET v4.1, downloaded around August 1. Update package applied before
compilation.
Compiled using GNU compilers.
CentOS 6.4
(Met 4.0's grid_stat and madis2nc runs operationally on this system daily.)
My first problem is the apparent discrepancy between the options given in
the Users' Guide and those the program appears to have. The manual (4.1,
May 2013) lists -ens_valid (and -ens_lead) as options in the program, but
using them generates an error message. Issuing ensemble_stat without any
options does not list these options, but does list -ssvar_mean, which is not
listed in the manual.
My second problem comes when I try to run the program. I eventually want to
bring in my MADIS data for verification (as I'm doing with other model
verifications), but as a start, I just want the program to run and produce
some diagnostic ensemble statistics. When I run the program with a couple
of grib files, I get the messages:
DEBUG 1: Default Config File:
/home/stevem/wrf/MET/METv4.1/data/config/EnsembleStatConfig_default
DEBUG 1: User Config File: ./EnsembleStatConfig
ERROR :
ERROR : VarInfoFactory::new_var_info() -> unsupported gridded data file
type "0"
ERROR :
I have uploaded a simple set of files to the "masters_data" directory on
your ftp site. The command I run is found in verf0.csh. The grib files I'm
trying to send to the program are c00.grb and p01.grb. These are 144-hour
forecast grib files generated from WRF output by the UPP. I have stripped
all but the bare-necessity records from the grib files to speed my
processing.
I've looked quickly through the MET_HELP archives but haven't noted anything
about ensemble_stat. Please let me know what I am doing wrong here, and/or
direct me to the documentation that will help me.
Steve Masters smasters at cfl.rr.com
Dr. Stephen Masters Consulting, LLC
Melbourne, FL
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: MET ensemble_stat problems
From: John Halley Gotway
Time: Mon Aug 11 13:42:21 2014
Stephen,
You are correct. The command line arguments listed in section 7.2.1
of the
MET User's Guide do not match the usage statement from the tool
itself.
Thank you for letting us know about this discrepancy. The usage
statement
from the tool is correct, and we failed to keep the documentation up
to
date. We are working on the next release of MET now and will correct
the
information in the user's guide.
Thank you for sending your data. It makes it easier to debug. The
reason
for the error you're seeing is that the configuration file is
requesting
that verification be performed by specifying an entry in the
"fcst.field"
section. However, you haven't passed it any observations to use. To
get
past that problem, just empty out that section of the config file, as
I've
done in the attached version.
The next problem you'll see is this:
WARNING: process_ensemble() -> APCP/A24 not found in file
"p01.grib"
There's no 24-hour precip in those GRIB files, just a whole bunch of
hourly
accumulations. Looks like those files contain hourly output from
forecast
hours 0 to 169. Just to get an example going, I chose 2-m temperature
for
the 24-hour forecast hour.
That should enable your script to run.
I'll look at adding a more useful error message to the next version of
MET
than the rather cryptic one you got!
Thanks,
John Halley Gotway
met_help at ucar.edu
On Sat, Aug 9, 2014 at 6:38 PM, Stephen Masters via RT
<met_help at ucar.edu>
wrote:
>
> Sat Aug 09 18:38:19 2014: Request 68582 was acted upon.
> Transaction: Ticket created by smasters at cfl.rr.com
> Queue: met_help
> Subject: MET ensemble_stat problems
> Owner: Nobody
> Requestors: smasters at cfl.rr.com
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=68582 >
>
>
> I am trying to use ensemble_stat for the first time and am having
some
> problems. My configuration is:
>
> MET v4.1, downloaded around August 1. Update package applied before
> compilation.
> Compiled using GNU compilers.
> CentOS 6.4
> (Met 4.0's grid_stat and madis2nc runs operationally on this system
daily.)
>
> My first problem is the apparent discrepancy between the options
given in
> the Users' Guide and those the program appears to have. The manual
(4.1,
> May 2013) lists -ens_valid (and -ens_lead) as options in the
program, but
> using them generates an error message. Issuing ensemble_stat
without any
> options does not list these options, but does list -ssvar_mean,
which is
> not
> listed in the manual.
>
> My second problem comes when I try to run the program. I eventually
want
> to
> bring in my MADIS data for verification (as I'm doing with other
model
> verifications), but as a start, I just want the program to run and
produce
> some diagnostic ensemble statistics. When I run the program with a
couple
> of grib files, I get the messages:
>
> DEBUG 1: Default Config File:
> /home/stevem/wrf/MET/METv4.1/data/config/EnsembleStatConfig_default
> DEBUG 1: User Config File: ./EnsembleStatConfig
> ERROR :
> ERROR : VarInfoFactory::new_var_info() -> unsupported gridded data
file
> type "0"
> ERROR :
>
> I have uploaded a simple set of files to the "masters_data"
directory on
> your ftp site. The command I run is found in verf0.csh. The grib
files
> I'm
> trying to send to the program are c00.grb and p01.grb. These are
144-hour
> forecast grib files generated from WRF output by the UPP. I have
stripped
> all but the bare-necessity records from the grib files to speed my
> processing.
>
> I've looked quickly through the MET_HELP archives but haven't noted
> anything
> about ensemble_stat. Please let me know what I am doing wrong
here,
> and/or
> direct me to the documentation that will help me.
>
> Steve Masters smasters at cfl.rr.com
> Dr. Stephen Masters Consulting, LLC
> Melbourne, FL
>
>
>
------------------------------------------------
Subject: MET ensemble_stat problems
From: John Halley Gotway
Time: Mon Aug 11 14:02:17 2014
Steve,
FYI - in future versions of MET, when you request that verification be
performed but do not pass ensemble_stat any verifying observations,
you'll
get the following more descriptive error message:
ERROR : EnsembleStatConfInfo::process_config() -> When "fcst.field"
is
non-empty, you must use "-point_obs" and/or "-grid_obs" to specify the
verifying observations.
Thanks,
John
On Mon, Aug 11, 2014 at 1:41 PM, John Halley Gotway <johnhg at ucar.edu>
wrote:
> Stephen,
>
> You are correct. The command line arguments listed in section 7.2.1
of
> the MET User's Guide do not match the usage statement from the tool
> itself. Thank you for letting us know about this discrepancy. The
usage
> statement from the tool is correct, and we failed to keep the
documentation
> up to date. We are working on the next release of MET now and will
correct
> the information in the user's guide.
>
> Thank you for sending your data. It makes it easier to debug. The
reason
> for the error you're seeing is that the configuration file is
requesting
> that verification be performed by specifying an entry in the
"fcst.field"
> section. However, you haven't passed it any observations to use.
To get
> past that problem, just empty out that section of the config file,
as I've
> done in the attached version.
>
> The next problem you'll see is this:
> WARNING: process_ensemble() -> APCP/A24 not found in file
"p01.grib"
>
> There's no 24-hour precip in those GRIB files, just a whole bunch of
> hourly accumulations. Looks like those files contain hourly output
from
> forecast hours 0 to 169. Just to get an example going, I chose 2-m
> temperature for the 24-hour forecast hour.
>
> That should enable your script to run.
>
> I'll look at adding a more useful error message to the next version
of MET
> than the rather cryptic one you got!
>
> Thanks,
> John Halley Gotway
> met_help at ucar.edu
>
>
>
>
>
>
> On Sat, Aug 9, 2014 at 6:38 PM, Stephen Masters via RT
<met_help at ucar.edu>
> wrote:
>
>>
>> Sat Aug 09 18:38:19 2014: Request 68582 was acted upon.
>> Transaction: Ticket created by smasters at cfl.rr.com
>> Queue: met_help
>> Subject: MET ensemble_stat problems
>> Owner: Nobody
>> Requestors: smasters at cfl.rr.com
>> Status: new
>> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=68582 >
>>
>>
>> I am trying to use ensemble_stat for the first time and am having
some
>> problems. My configuration is:
>>
>> MET v4.1, downloaded around August 1. Update package applied
before
>> compilation.
>> Compiled using GNU compilers.
>> CentOS 6.4
>> (Met 4.0's grid_stat and madis2nc runs operationally on this system
>> daily.)
>>
>> My first problem is the apparent discrepancy between the options
given in
>> the Users' Guide and those the program appears to have. The manual
(4.1,
>> May 2013) lists -ens_valid (and -ens_lead) as options in the
program, but
>> using them generates an error message. Issuing ensemble_stat
without any
>> options does not list these options, but does list -ssvar_mean,
which is
>> not
>> listed in the manual.
>>
>> My second problem comes when I try to run the program. I
eventually want
>> to
>> bring in my MADIS data for verification (as I'm doing with other
model
>> verifications), but as a start, I just want the program to run and
produce
>> some diagnostic ensemble statistics. When I run the program with a
couple
>> of grib files, I get the messages:
>>
>> DEBUG 1: Default Config File:
>> /home/stevem/wrf/MET/METv4.1/data/config/EnsembleStatConfig_default
>> DEBUG 1: User Config File: ./EnsembleStatConfig
>> ERROR :
>> ERROR : VarInfoFactory::new_var_info() -> unsupported gridded data
file
>> type "0"
>> ERROR :
>>
>> I have uploaded a simple set of files to the "masters_data"
directory on
>> your ftp site. The command I run is found in verf0.csh. The grib
files
>> I'm
>> trying to send to the program are c00.grb and p01.grb. These are
144-hour
>> forecast grib files generated from WRF output by the UPP. I have
>> stripped
>> all but the bare-necessity records from the grib files to speed my
>> processing.
>>
>> I've looked quickly through the MET_HELP archives but haven't noted
>> anything
>> about ensemble_stat. Please let me know what I am doing wrong
here,
>> and/or
>> direct me to the documentation that will help me.
>>
>> Steve Masters smasters at cfl.rr.com
>> Dr. Stephen Masters Consulting, LLC
>> Melbourne, FL
>>
>>
>>
>
------------------------------------------------
Subject: RE: [rt.rap.ucar.edu #68582] MET ensemble_stat problems
From: Stephen Masters
Time: Thu Aug 14 03:30:59 2014
John --
Thank you for the advice on both counts. I was able to run the
program successfully.
Steve Masters
-----Original Message-----
From: John Halley Gotway via RT [mailto:met_help at ucar.edu]
Sent: Monday, August 11, 2014 3:42 PM
To: smasters at cfl.rr.com
Subject: Re: [rt.rap.ucar.edu #68582] MET ensemble_stat problems
Stephen,
You are correct. The command line arguments listed in section 7.2.1
of the MET User's Guide do not match the usage statement from the tool
itself.
Thank you for letting us know about this discrepancy. The usage
statement from the tool is correct, and we failed to keep the
documentation up to date. We are working on the next release of MET
now and will correct the information in the user's guide.
Thank you for sending your data. It makes it easier to debug. The
reason for the error you're seeing is that the configuration file is
requesting that verification be performed by specifying an entry in
the "fcst.field"
section. However, you haven't passed it any observations to use. To
get past that problem, just empty out that section of the config file,
as I've done in the attached version.
The next problem you'll see is this:
WARNING: process_ensemble() -> APCP/A24 not found in file
"p01.grib"
There's no 24-hour precip in those GRIB files, just a whole bunch of
hourly accumulations. Looks like those files contain hourly output
from forecast hours 0 to 169. Just to get an example going, I chose
2-m temperature for the 24-hour forecast hour.
That should enable your script to run.
I'll look at adding a more useful error message to the next version of
MET than the rather cryptic one you got!
Thanks,
John Halley Gotway
met_help at ucar.edu
On Sat, Aug 9, 2014 at 6:38 PM, Stephen Masters via RT
<met_help at ucar.edu>
wrote:
>
> Sat Aug 09 18:38:19 2014: Request 68582 was acted upon.
> Transaction: Ticket created by smasters at cfl.rr.com
> Queue: met_help
> Subject: MET ensemble_stat problems
> Owner: Nobody
> Requestors: smasters at cfl.rr.com
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=68582
> >
>
>
> I am trying to use ensemble_stat for the first time and am having
some
> problems. My configuration is:
>
> MET v4.1, downloaded around August 1. Update package applied before
> compilation.
> Compiled using GNU compilers.
> CentOS 6.4
> (Met 4.0's grid_stat and madis2nc runs operationally on this system
> daily.)
>
> My first problem is the apparent discrepancy between the options
given
> in the Users' Guide and those the program appears to have. The
manual
> (4.1, May 2013) lists -ens_valid (and -ens_lead) as options in the
> program, but using them generates an error message. Issuing
> ensemble_stat without any options does not list these options, but
> does list -ssvar_mean, which is not listed in the manual.
>
> My second problem comes when I try to run the program. I eventually
> want to bring in my MADIS data for verification (as I'm doing with
> other model verifications), but as a start, I just want the program
to
> run and produce some diagnostic ensemble statistics. When I run the
> program with a couple of grib files, I get the messages:
>
> DEBUG 1: Default Config File:
> /home/stevem/wrf/MET/METv4.1/data/config/EnsembleStatConfig_default
> DEBUG 1: User Config File: ./EnsembleStatConfig ERROR :
> ERROR : VarInfoFactory::new_var_info() -> unsupported gridded data
> file type "0"
> ERROR :
>
> I have uploaded a simple set of files to the "masters_data"
directory
> on your ftp site. The command I run is found in verf0.csh. The
grib
> files I'm trying to send to the program are c00.grb and p01.grb.
> These are 144-hour
> forecast grib files generated from WRF output by the UPP. I have
stripped
> all but the bare-necessity records from the grib files to speed my
> processing.
>
> I've looked quickly through the MET_HELP archives but haven't noted
> anything
> about ensemble_stat. Please let me know what I am doing wrong
here,
> and/or
> direct me to the documentation that will help me.
>
> Steve Masters smasters at cfl.rr.com
> Dr. Stephen Masters Consulting, LLC
> Melbourne, FL
>
>
>
------------------------------------------------
Subject: MET ensemble_stat problems
From: John Halley Gotway
Time: Thu Aug 14 09:50:01 2014
Steve,
Thanks for letting me know you were able to get it working. Just let
us
know if any more questions or issues come up in your use of MET.
Thanks,
John
On Thu, Aug 14, 2014 at 3:30 AM, Stephen Masters via RT
<met_help at ucar.edu>
wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=68582 >
>
> John --
>
> Thank you for the advice on both counts. I was able to run the
program
> successfully.
>
> Steve Masters
>
> -----Original Message-----
> From: John Halley Gotway via RT [mailto:met_help at ucar.edu]
> Sent: Monday, August 11, 2014 3:42 PM
> To: smasters at cfl.rr.com
> Subject: Re: [rt.rap.ucar.edu #68582] MET ensemble_stat problems
>
> Stephen,
>
> You are correct. The command line arguments listed in section 7.2.1
of
> the MET User's Guide do not match the usage statement from the tool
itself.
> Thank you for letting us know about this discrepancy. The usage
statement
> from the tool is correct, and we failed to keep the documentation up
to
> date. We are working on the next release of MET now and will
correct the
> information in the user's guide.
>
> Thank you for sending your data. It makes it easier to debug. The
reason
> for the error you're seeing is that the configuration file is
requesting
> that verification be performed by specifying an entry in the
"fcst.field"
> section. However, you haven't passed it any observations to use.
To get
> past that problem, just empty out that section of the config file,
as I've
> done in the attached version.
>
> The next problem you'll see is this:
> WARNING: process_ensemble() -> APCP/A24 not found in file
"p01.grib"
>
> There's no 24-hour precip in those GRIB files, just a whole bunch of
> hourly accumulations. Looks like those files contain hourly output
from
> forecast hours 0 to 169. Just to get an example going, I chose 2-m
> temperature for the 24-hour forecast hour.
>
> That should enable your script to run.
>
> I'll look at adding a more useful error message to the next version
of MET
> than the rather cryptic one you got!
>
> Thanks,
> John Halley Gotway
> met_help at ucar.edu
>
>
>
>
>
>
> On Sat, Aug 9, 2014 at 6:38 PM, Stephen Masters via RT
<met_help at ucar.edu>
> wrote:
>
> >
> > Sat Aug 09 18:38:19 2014: Request 68582 was acted upon.
> > Transaction: Ticket created by smasters at cfl.rr.com
> > Queue: met_help
> > Subject: MET ensemble_stat problems
> > Owner: Nobody
> > Requestors: smasters at cfl.rr.com
> > Status: new
> > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=68582
> > >
> >
> >
> > I am trying to use ensemble_stat for the first time and am having
some
> > problems. My configuration is:
> >
> > MET v4.1, downloaded around August 1. Update package applied
before
> > compilation.
> > Compiled using GNU compilers.
> > CentOS 6.4
> > (Met 4.0's grid_stat and madis2nc runs operationally on this
system
> > daily.)
> >
> > My first problem is the apparent discrepancy between the options
given
> > in the Users' Guide and those the program appears to have. The
manual
> > (4.1, May 2013) lists -ens_valid (and -ens_lead) as options in
the
> > program, but using them generates an error message. Issuing
> > ensemble_stat without any options does not list these options, but
> > does list -ssvar_mean, which is not listed in the manual.
> >
> > My second problem comes when I try to run the program. I
eventually
> > want to bring in my MADIS data for verification (as I'm doing with
> > other model verifications), but as a start, I just want the
program to
> > run and produce some diagnostic ensemble statistics. When I run
the
> > program with a couple of grib files, I get the messages:
> >
> > DEBUG 1: Default Config File:
> >
/home/stevem/wrf/MET/METv4.1/data/config/EnsembleStatConfig_default
> > DEBUG 1: User Config File: ./EnsembleStatConfig ERROR :
> > ERROR : VarInfoFactory::new_var_info() -> unsupported gridded
data
> > file type "0"
> > ERROR :
> >
> > I have uploaded a simple set of files to the "masters_data"
directory
> > on your ftp site. The command I run is found in verf0.csh. The
grib
> > files I'm trying to send to the program are c00.grb and p01.grb.
> > These are 144-hour
> > forecast grib files generated from WRF output by the UPP. I have
> stripped
> > all but the bare-necessity records from the grib files to speed my
> > processing.
> >
> > I've looked quickly through the MET_HELP archives but haven't
noted
> > anything
> > about ensemble_stat. Please let me know what I am doing wrong
here,
> > and/or
> > direct me to the documentation that will help me.
> >
> > Steve Masters smasters at cfl.rr.com
> > Dr. Stephen Masters Consulting, LLC
> > Melbourne, FL
> >
> >
> >
>
>
>
>
>
>
------------------------------------------------
More information about the Met_help
mailing list