[Met_help] [rt.rap.ucar.edu #44618] History for MET3.0 MODE convex_hull
RAL HelpDesk {for Randy Bullock}
met_help at ucar.edu
Wed Apr 27 13:40:49 MDT 2011
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
Hello,
I am trying to install the METv3.0 on my system, but I encountered some problem with the MODE Tool.
When I compiled the Makefile I didn't find any error, but if I run the script inside the folder scripts
./test_mode.sh
I obtain this message:
*** Running MODE on APCP using netCDF input for both forecast and observation ***
Forecast File: ../out/pcp_combine/sample_fcst_12L_2005080712V_12A.nc
Observation File: ../out/pcp_combine/sample_obs_2005080712V_12A.nc
Match Config File: config/WrfModeConfig_APCP_12
Merge Config File: config/WrfModeConfig_APCP_12
Forecast Field: APCP_12 at A12
Observation Field: APCP_12 at A12
Identifying objects in the forecast and observation fields...
Computing contingency table statistics...
Identified: 7 forecast objects and 4 observation objects.
Performing merging (threshold merging) in the forecast field.
Performing merging (threshold merging) in the observation field.
Remaining: 7 forecast objects and 4 observation objects.
Performing matching between the forecast and observation fields.
?
ERROR: convex_hull(Polyline &) -> can't find next hull point
?
*** Running MODE on APCP using a GRIB forecast and netCDF observation ***
Forecast File: ../data/sample_fcst/2005080700/wrfprs_ruc13_24.tm00_G212
Observation File: ../out/pcp_combine/sample_obs_2005080800V_24A.nc
Match Config File: config/WrfModeConfig_APCP_24
Merge Config File: config/WrfModeConfig_APCP_24
Forecast Field: APCP_24 at A24
Observation Field: APCP_24 at A24
Identifying objects in the forecast and observation fields...
Computing contingency table statistics...
Identified: 4 forecast objects and 6 observation objects.
Performing merging (no merging) in the forecast field.
Performing merging (no merging) in the observation field.
Remaining: 4 forecast objects and 6 observation objects.
Performing matching between the forecast and observation fields.
?
ERROR: convex_hull(Polyline &) -> can't find next hull point
?
*** Running MODE on RH at 500mb using GRIB input for both forecast and observation ***
Forecast File: ../data/sample_fcst/2005080700/wrfprs_ruc13_12.tm00_G212
Observation File: ../data/sample_fcst/2005080712/wrfprs_ruc13_00.tm00_G212
Match Config File: config/WrfModeConfig_RH
Merge Config File: config/WrfModeConfig_RH
Forecast Field: RH at P500
Observation Field: RH at P500
Identifying objects in the forecast and observation fields...
Computing contingency table statistics...
Identified: 8 forecast objects and 12 observation objects.
Performing merging (no merging) in the forecast field.
Performing merging (no merging) in the observation field.
Remaining: 8 forecast objects and 12 observation objects.
Performing matching between the forecast and observation fields.
?
ERROR: convex_hull(Polyline &) -> can't find next hull point
?
?
can it be due to version of GSL library? I installed the version 1.11.
Thank you so much for your help.
Best regards.
Sabrina Gentile
Sabrina Gentile, Ph.D student
CETEMPS, University of L'Aquila
Department of Physics - Atmospheric Sciences
Via Vetoio, 67010 Coppito L'Aquila
Italy
E-mail: sabrina.gentile at aquila.infn.it
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: MET3.0 MODE convex_hull
From: Randy Bullock
Time: Fri Feb 18 13:23:41 2011
Hi -
I'll have to look at the convex hull source code to see what
the problem might be.
In the meantime, what can you tell me about the operating system
and cpu in your computer? In particular, do you know if your
computer is using IEEE 754 floating-point arithmetic?
Thanks
Randy Bullock
On Fri Feb 18 07:25:00 2011, sabrina.gentile at aquila.infn.it wrote:
> Hello,
>
> I am trying to install the METv3.0 on my system, but I encountered
> some problem with the MODE Tool.
>
> When I compiled the Makefile I didn't find any error, but if I run
the
> script inside the folder scripts
>
> ./test_mode.sh
>
> I obtain this message:
>
> *** Running MODE on APCP using netCDF input for both forecast and
> observation ***
>
> Forecast File: ../out/pcp_combine/sample_fcst_12L_2005080712V_12A.nc
>
> Observation File: ../out/pcp_combine/sample_obs_2005080712V_12A.nc
>
> Match Config File: config/WrfModeConfig_APCP_12
>
> Merge Config File: config/WrfModeConfig_APCP_12
>
> Forecast Field: APCP_12 at A12
>
> Observation Field: APCP_12 at A12
>
> Identifying objects in the forecast and observation fields...
>
> Computing contingency table statistics...
>
> Identified: 7 forecast objects and 4 observation objects.
>
> Performing merging (threshold merging) in the forecast field.
>
> Performing merging (threshold merging) in the observation field.
>
> Remaining: 7 forecast objects and 4 observation objects.
>
> Performing matching between the forecast and observation fields.
>
> ?
>
> ERROR: convex_hull(Polyline &) -> can't find next hull point
>
> ?
>
> *** Running MODE on APCP using a GRIB forecast and netCDF
observation
> ***
>
> Forecast File:
> ../data/sample_fcst/2005080700/wrfprs_ruc13_24.tm00_G212
>
> Observation File: ../out/pcp_combine/sample_obs_2005080800V_24A.nc
>
> Match Config File: config/WrfModeConfig_APCP_24
>
> Merge Config File: config/WrfModeConfig_APCP_24
>
> Forecast Field: APCP_24 at A24
>
> Observation Field: APCP_24 at A24
>
> Identifying objects in the forecast and observation fields...
>
> Computing contingency table statistics...
>
> Identified: 4 forecast objects and 6 observation objects.
>
> Performing merging (no merging) in the forecast field.
>
> Performing merging (no merging) in the observation field.
>
> Remaining: 4 forecast objects and 6 observation objects.
>
> Performing matching between the forecast and observation fields.
>
> ?
>
> ERROR: convex_hull(Polyline &) -> can't find next hull point
>
> ?
>
> *** Running MODE on RH at 500mb using GRIB input for both forecast
and
> observation ***
>
> Forecast File:
> ../data/sample_fcst/2005080700/wrfprs_ruc13_12.tm00_G212
>
> Observation File:
> ../data/sample_fcst/2005080712/wrfprs_ruc13_00.tm00_G212
>
> Match Config File: config/WrfModeConfig_RH
>
> Merge Config File: config/WrfModeConfig_RH
>
> Forecast Field: RH at P500
>
> Observation Field: RH at P500
>
> Identifying objects in the forecast and observation fields...
>
> Computing contingency table statistics...
>
> Identified: 8 forecast objects and 12 observation objects.
>
> Performing merging (no merging) in the forecast field.
>
> Performing merging (no merging) in the observation field.
>
> Remaining: 8 forecast objects and 12 observation objects.
>
> Performing matching between the forecast and observation fields.
>
> ?
>
> ERROR: convex_hull(Polyline &) -> can't find next hull point
>
> ?
>
> ?
>
> can it be due to version of GSL library? I installed the version
1.11.
>
> Thank you so much for your help.
>
> Best regards.
>
> Sabrina Gentile
>
>
> Sabrina Gentile, Ph.D student
> CETEMPS, University of L'Aquila
> Department of Physics - Atmospheric Sciences
> Via Vetoio, 67010 Coppito L'Aquila
> Italy
> E-mail: sabrina.gentile at aquila.infn.it
>
------------------------------------------------
Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
From: Sabrina Gentile
Time: Mon Feb 21 03:39:08 2011
Dear Randy,
thank you for your reply. I send you some characteristics of our
system.
Dual Intel(R) Xeon(R) CPU X5450 @ 3.00GHz
Linux Ubuntu 8.10
gcc (Ubuntu 4.3.2-1ubuntu12) 4.3.2
icpc (ICC) 11.0 20090318
ifort (IFORT) 11.0 20090318
CXX_FLAGS = -Wall -Wshadow -static
FC_FLAGS = -static
GNU Scientific library 1.14
netcdf library version "3.6.3" compiled with intel compilers
bufr library compiled with intel compilers
Flags for NetCDF and BUFR:
export CC=icc
export CXX=icpc
export FC=ifort
export F77=ifort
export CFLAGS="-O3 -xHost -axHost -ip -fPIC"
export CXXFLAGS="-O3 -xHost -axHost -ip -fPIC"
export FFLAGS="-O3 -xHost -axHost -ip -fPIC"
export FCFLAGS="-O3 -xHost -axHost -ip -fPIC"
export LDFLAGS="-i-dynamic"
Please let me know if there is anything else you need.
Best regards.
Sabrina Gentile
Sabrina Gentile, Ph.D student
CETEMPS, University of L'Aquila
Department of Physics - Atmospheric Sciences
Via Vetoio, 67010 Coppito L'Aquila
Italy
E-mail: sabrina.gentile at aquila.infn.it
----- Original Message -----
From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
To: <sabrina.gentile at aquila.infn.it>
Cc: <met_help at ucar.edu>
Sent: Friday, February 18, 2011 9:23 PM
Subject: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>
> Hi -
>
> I'll have to look at the convex hull source code to see what
> the problem might be.
>
> In the meantime, what can you tell me about the operating system
> and cpu in your computer? In particular, do you know if your
> computer is using IEEE 754 floating-point arithmetic?
>
> Thanks
>
> Randy Bullock
>
> On Fri Feb 18 07:25:00 2011, sabrina.gentile at aquila.infn.it wrote:
>> Hello,
>>
>> I am trying to install the METv3.0 on my system, but I encountered
>> some problem with the MODE Tool.
>>
>> When I compiled the Makefile I didn't find any error, but if I run
the
>> script inside the folder scripts
>>
>> ./test_mode.sh
>>
>> I obtain this message:
>>
>> *** Running MODE on APCP using netCDF input for both forecast and
>> observation ***
>>
>> Forecast File:
../out/pcp_combine/sample_fcst_12L_2005080712V_12A.nc
>>
>> Observation File: ../out/pcp_combine/sample_obs_2005080712V_12A.nc
>>
>> Match Config File: config/WrfModeConfig_APCP_12
>>
>> Merge Config File: config/WrfModeConfig_APCP_12
>>
>> Forecast Field: APCP_12 at A12
>>
>> Observation Field: APCP_12 at A12
>>
>> Identifying objects in the forecast and observation fields...
>>
>> Computing contingency table statistics...
>>
>> Identified: 7 forecast objects and 4 observation objects.
>>
>> Performing merging (threshold merging) in the forecast field.
>>
>> Performing merging (threshold merging) in the observation field.
>>
>> Remaining: 7 forecast objects and 4 observation objects.
>>
>> Performing matching between the forecast and observation fields.
>>
>> ?
>>
>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>>
>> ?
>>
>> *** Running MODE on APCP using a GRIB forecast and netCDF
observation
>> ***
>>
>> Forecast File:
>> ../data/sample_fcst/2005080700/wrfprs_ruc13_24.tm00_G212
>>
>> Observation File: ../out/pcp_combine/sample_obs_2005080800V_24A.nc
>>
>> Match Config File: config/WrfModeConfig_APCP_24
>>
>> Merge Config File: config/WrfModeConfig_APCP_24
>>
>> Forecast Field: APCP_24 at A24
>>
>> Observation Field: APCP_24 at A24
>>
>> Identifying objects in the forecast and observation fields...
>>
>> Computing contingency table statistics...
>>
>> Identified: 4 forecast objects and 6 observation objects.
>>
>> Performing merging (no merging) in the forecast field.
>>
>> Performing merging (no merging) in the observation field.
>>
>> Remaining: 4 forecast objects and 6 observation objects.
>>
>> Performing matching between the forecast and observation fields.
>>
>> ?
>>
>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>>
>> ?
>>
>> *** Running MODE on RH at 500mb using GRIB input for both forecast
and
>> observation ***
>>
>> Forecast File:
>> ../data/sample_fcst/2005080700/wrfprs_ruc13_12.tm00_G212
>>
>> Observation File:
>> ../data/sample_fcst/2005080712/wrfprs_ruc13_00.tm00_G212
>>
>> Match Config File: config/WrfModeConfig_RH
>>
>> Merge Config File: config/WrfModeConfig_RH
>>
>> Forecast Field: RH at P500
>>
>> Observation Field: RH at P500
>>
>> Identifying objects in the forecast and observation fields...
>>
>> Computing contingency table statistics...
>>
>> Identified: 8 forecast objects and 12 observation objects.
>>
>> Performing merging (no merging) in the forecast field.
>>
>> Performing merging (no merging) in the observation field.
>>
>> Remaining: 8 forecast objects and 12 observation objects.
>>
>> Performing matching between the forecast and observation fields.
>>
>> ?
>>
>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>>
>> ?
>>
>> ?
>>
>> can it be due to version of GSL library? I installed the version
1.11.
>>
>> Thank you so much for your help.
>>
>> Best regards.
>>
>> Sabrina Gentile
>>
>>
>> Sabrina Gentile, Ph.D student
>> CETEMPS, University of L'Aquila
>> Department of Physics - Atmospheric Sciences
>> Via Vetoio, 67010 Coppito L'Aquila
>> Italy
>> E-mail: sabrina.gentile at aquila.infn.it
>>
>
>
>
------------------------------------------------
Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
From: Sabrina Gentile
Time: Mon Feb 28 07:03:11 2011
Dear Randy,
I attached the mail that I sent you a week ago, since I didn't receive
any
answer.
Is possible to solve this problem?
Thank you so much for your help.
Best regards.
Sabrina Gentile
Sabrina Gentile, Ph.D student
CETEMPS, University of L'Aquila
Department of Physics - Atmospheric Sciences
Via Vetoio, 67010 Coppito L'Aquila
Italy
E-mail: sabrina.gentile at aquila.infn.it
----- Original Message -----
From: "RAL HelpDesk {for Sabrina Gentile}" <met_help at ucar.edu>
To: <sabrina.gentile at aquila.infn.it>
Cc: <met_help at ucar.edu>
Sent: Monday, February 21, 2011 11:39 AM
Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
> Dear Randy,
> thank you for your reply. I send you some characteristics of our
system.
>
> Dual Intel(R) Xeon(R) CPU X5450 @ 3.00GHz
>
> Linux Ubuntu 8.10
>
> gcc (Ubuntu 4.3.2-1ubuntu12) 4.3.2
>
> icpc (ICC) 11.0 20090318
>
> ifort (IFORT) 11.0 20090318
>
> CXX_FLAGS = -Wall -Wshadow -static
>
> FC_FLAGS = -static
>
> GNU Scientific library 1.14
>
> netcdf library version "3.6.3" compiled with intel compilers
>
> bufr library compiled with intel compilers
>
> Flags for NetCDF and BUFR:
>
> export CC=icc
>
> export CXX=icpc
>
> export FC=ifort
>
> export F77=ifort
>
> export CFLAGS="-O3 -xHost -axHost -ip -fPIC"
>
> export CXXFLAGS="-O3 -xHost -axHost -ip -fPIC"
>
> export FFLAGS="-O3 -xHost -axHost -ip -fPIC"
>
> export FCFLAGS="-O3 -xHost -axHost -ip -fPIC"
>
> export LDFLAGS="-i-dynamic"
>
>
>
> Please let me know if there is anything else you need.
> Best regards.
>
> Sabrina Gentile
>
> Sabrina Gentile, Ph.D student
> CETEMPS, University of L'Aquila
> Department of Physics - Atmospheric Sciences
> Via Vetoio, 67010 Coppito L'Aquila
> Italy
> E-mail: sabrina.gentile at aquila.infn.it
>
>
>
>
> ----- Original Message -----
> From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
> To: <sabrina.gentile at aquila.infn.it>
> Cc: <met_help at ucar.edu>
> Sent: Friday, February 18, 2011 9:23 PM
> Subject: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>
>
>>
>> Hi -
>>
>> I'll have to look at the convex hull source code to see what
>> the problem might be.
>>
>> In the meantime, what can you tell me about the operating system
>> and cpu in your computer? In particular, do you know if your
>> computer is using IEEE 754 floating-point arithmetic?
>>
>> Thanks
>>
>> Randy Bullock
>>
>> On Fri Feb 18 07:25:00 2011, sabrina.gentile at aquila.infn.it wrote:
>>> Hello,
>>>
>>> I am trying to install the METv3.0 on my system, but I encountered
>>> some problem with the MODE Tool.
>>>
>>> When I compiled the Makefile I didn't find any error, but if I run
the
>>> script inside the folder scripts
>>>
>>> ./test_mode.sh
>>>
>>> I obtain this message:
>>>
>>> *** Running MODE on APCP using netCDF input for both forecast and
>>> observation ***
>>>
>>> Forecast File:
../out/pcp_combine/sample_fcst_12L_2005080712V_12A.nc
>>>
>>> Observation File: ../out/pcp_combine/sample_obs_2005080712V_12A.nc
>>>
>>> Match Config File: config/WrfModeConfig_APCP_12
>>>
>>> Merge Config File: config/WrfModeConfig_APCP_12
>>>
>>> Forecast Field: APCP_12 at A12
>>>
>>> Observation Field: APCP_12 at A12
>>>
>>> Identifying objects in the forecast and observation fields...
>>>
>>> Computing contingency table statistics...
>>>
>>> Identified: 7 forecast objects and 4 observation objects.
>>>
>>> Performing merging (threshold merging) in the forecast field.
>>>
>>> Performing merging (threshold merging) in the observation field.
>>>
>>> Remaining: 7 forecast objects and 4 observation objects.
>>>
>>> Performing matching between the forecast and observation fields.
>>>
>>> ?
>>>
>>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>>>
>>> ?
>>>
>>> *** Running MODE on APCP using a GRIB forecast and netCDF
observation
>>> ***
>>>
>>> Forecast File:
>>> ../data/sample_fcst/2005080700/wrfprs_ruc13_24.tm00_G212
>>>
>>> Observation File: ../out/pcp_combine/sample_obs_2005080800V_24A.nc
>>>
>>> Match Config File: config/WrfModeConfig_APCP_24
>>>
>>> Merge Config File: config/WrfModeConfig_APCP_24
>>>
>>> Forecast Field: APCP_24 at A24
>>>
>>> Observation Field: APCP_24 at A24
>>>
>>> Identifying objects in the forecast and observation fields...
>>>
>>> Computing contingency table statistics...
>>>
>>> Identified: 4 forecast objects and 6 observation objects.
>>>
>>> Performing merging (no merging) in the forecast field.
>>>
>>> Performing merging (no merging) in the observation field.
>>>
>>> Remaining: 4 forecast objects and 6 observation objects.
>>>
>>> Performing matching between the forecast and observation fields.
>>>
>>> ?
>>>
>>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>>>
>>> ?
>>>
>>> *** Running MODE on RH at 500mb using GRIB input for both forecast
and
>>> observation ***
>>>
>>> Forecast File:
>>> ../data/sample_fcst/2005080700/wrfprs_ruc13_12.tm00_G212
>>>
>>> Observation File:
>>> ../data/sample_fcst/2005080712/wrfprs_ruc13_00.tm00_G212
>>>
>>> Match Config File: config/WrfModeConfig_RH
>>>
>>> Merge Config File: config/WrfModeConfig_RH
>>>
>>> Forecast Field: RH at P500
>>>
>>> Observation Field: RH at P500
>>>
>>> Identifying objects in the forecast and observation fields...
>>>
>>> Computing contingency table statistics...
>>>
>>> Identified: 8 forecast objects and 12 observation objects.
>>>
>>> Performing merging (no merging) in the forecast field.
>>>
>>> Performing merging (no merging) in the observation field.
>>>
>>> Remaining: 8 forecast objects and 12 observation objects.
>>>
>>> Performing matching between the forecast and observation fields.
>>>
>>> ?
>>>
>>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>>>
>>> ?
>>>
>>> ?
>>>
>>> can it be due to version of GSL library? I installed the version
1.11.
>>>
>>> Thank you so much for your help.
>>>
>>> Best regards.
>>>
>>> Sabrina Gentile
>>>
>>>
>>> Sabrina Gentile, Ph.D student
>>> CETEMPS, University of L'Aquila
>>> Department of Physics - Atmospheric Sciences
>>> Via Vetoio, 67010 Coppito L'Aquila
>>> Italy
>>> E-mail: sabrina.gentile at aquila.infn.it
>>>
>>
>>
>>
>
------------------------------------------------
Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
From: Randy Bullock
Time: Mon Feb 28 07:43:26 2011
Hi -
Sorry for not getting back to you sooner.
I'll look at it early this week.
Randy
On Mon, Feb 28, 2011 at 07:03:11AM -0700, RAL HelpDesk {for Sabrina
Gentile} wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=44618 >
>
> Dear Randy,
> I attached the mail that I sent you a week ago, since I didn't
receive any
> answer.
> Is possible to solve this problem?
> Thank you so much for your help.
> Best regards.
>
> Sabrina Gentile
>
> Sabrina Gentile, Ph.D student
> CETEMPS, University of L'Aquila
> Department of Physics - Atmospheric Sciences
> Via Vetoio, 67010 Coppito L'Aquila
> Italy
> E-mail: sabrina.gentile at aquila.infn.it
>
>
>
> ----- Original Message -----
> From: "RAL HelpDesk {for Sabrina Gentile}" <met_help at ucar.edu>
> To: <sabrina.gentile at aquila.infn.it>
> Cc: <met_help at ucar.edu>
> Sent: Monday, February 21, 2011 11:39 AM
> Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>
>
> > Dear Randy,
> > thank you for your reply. I send you some characteristics of our
system.
> >
> > Dual Intel(R) Xeon(R) CPU X5450 @ 3.00GHz
> >
> > Linux Ubuntu 8.10
> >
> > gcc (Ubuntu 4.3.2-1ubuntu12) 4.3.2
> >
> > icpc (ICC) 11.0 20090318
> >
> > ifort (IFORT) 11.0 20090318
> >
> > CXX_FLAGS = -Wall -Wshadow -static
> >
> > FC_FLAGS = -static
> >
> > GNU Scientific library 1.14
> >
> > netcdf library version "3.6.3" compiled with intel compilers
> >
> > bufr library compiled with intel compilers
> >
> > Flags for NetCDF and BUFR:
> >
> > export CC=icc
> >
> > export CXX=icpc
> >
> > export FC=ifort
> >
> > export F77=ifort
> >
> > export CFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >
> > export CXXFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >
> > export FFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >
> > export FCFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >
> > export LDFLAGS="-i-dynamic"
> >
> >
> >
> > Please let me know if there is anything else you need.
> > Best regards.
> >
> > Sabrina Gentile
> >
> > Sabrina Gentile, Ph.D student
> > CETEMPS, University of L'Aquila
> > Department of Physics - Atmospheric Sciences
> > Via Vetoio, 67010 Coppito L'Aquila
> > Italy
> > E-mail: sabrina.gentile at aquila.infn.it
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
> > To: <sabrina.gentile at aquila.infn.it>
> > Cc: <met_help at ucar.edu>
> > Sent: Friday, February 18, 2011 9:23 PM
> > Subject: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
> >
> >
> >>
> >> Hi -
> >>
> >> I'll have to look at the convex hull source code to see what
> >> the problem might be.
> >>
> >> In the meantime, what can you tell me about the operating system
> >> and cpu in your computer? In particular, do you know if your
> >> computer is using IEEE 754 floating-point arithmetic?
> >>
> >> Thanks
> >>
> >> Randy Bullock
> >>
> >> On Fri Feb 18 07:25:00 2011, sabrina.gentile at aquila.infn.it
wrote:
> >>> Hello,
> >>>
> >>> I am trying to install the METv3.0 on my system, but I
encountered
> >>> some problem with the MODE Tool.
> >>>
> >>> When I compiled the Makefile I didn't find any error, but if I
run the
> >>> script inside the folder scripts
> >>>
> >>> ./test_mode.sh
> >>>
> >>> I obtain this message:
> >>>
> >>> *** Running MODE on APCP using netCDF input for both forecast
and
> >>> observation ***
> >>>
> >>> Forecast File:
../out/pcp_combine/sample_fcst_12L_2005080712V_12A.nc
> >>>
> >>> Observation File:
../out/pcp_combine/sample_obs_2005080712V_12A.nc
> >>>
> >>> Match Config File: config/WrfModeConfig_APCP_12
> >>>
> >>> Merge Config File: config/WrfModeConfig_APCP_12
> >>>
> >>> Forecast Field: APCP_12 at A12
> >>>
> >>> Observation Field: APCP_12 at A12
> >>>
> >>> Identifying objects in the forecast and observation fields...
> >>>
> >>> Computing contingency table statistics...
> >>>
> >>> Identified: 7 forecast objects and 4 observation objects.
> >>>
> >>> Performing merging (threshold merging) in the forecast field.
> >>>
> >>> Performing merging (threshold merging) in the observation field.
> >>>
> >>> Remaining: 7 forecast objects and 4 observation objects.
> >>>
> >>> Performing matching between the forecast and observation fields.
> >>>
> >>> ?
> >>>
> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
> >>>
> >>> ?
> >>>
> >>> *** Running MODE on APCP using a GRIB forecast and netCDF
observation
> >>> ***
> >>>
> >>> Forecast File:
> >>> ../data/sample_fcst/2005080700/wrfprs_ruc13_24.tm00_G212
> >>>
> >>> Observation File:
../out/pcp_combine/sample_obs_2005080800V_24A.nc
> >>>
> >>> Match Config File: config/WrfModeConfig_APCP_24
> >>>
> >>> Merge Config File: config/WrfModeConfig_APCP_24
> >>>
> >>> Forecast Field: APCP_24 at A24
> >>>
> >>> Observation Field: APCP_24 at A24
> >>>
> >>> Identifying objects in the forecast and observation fields...
> >>>
> >>> Computing contingency table statistics...
> >>>
> >>> Identified: 4 forecast objects and 6 observation objects.
> >>>
> >>> Performing merging (no merging) in the forecast field.
> >>>
> >>> Performing merging (no merging) in the observation field.
> >>>
> >>> Remaining: 4 forecast objects and 6 observation objects.
> >>>
> >>> Performing matching between the forecast and observation fields.
> >>>
> >>> ?
> >>>
> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
> >>>
> >>> ?
> >>>
> >>> *** Running MODE on RH at 500mb using GRIB input for both
forecast and
> >>> observation ***
> >>>
> >>> Forecast File:
> >>> ../data/sample_fcst/2005080700/wrfprs_ruc13_12.tm00_G212
> >>>
> >>> Observation File:
> >>> ../data/sample_fcst/2005080712/wrfprs_ruc13_00.tm00_G212
> >>>
> >>> Match Config File: config/WrfModeConfig_RH
> >>>
> >>> Merge Config File: config/WrfModeConfig_RH
> >>>
> >>> Forecast Field: RH at P500
> >>>
> >>> Observation Field: RH at P500
> >>>
> >>> Identifying objects in the forecast and observation fields...
> >>>
> >>> Computing contingency table statistics...
> >>>
> >>> Identified: 8 forecast objects and 12 observation objects.
> >>>
> >>> Performing merging (no merging) in the forecast field.
> >>>
> >>> Performing merging (no merging) in the observation field.
> >>>
> >>> Remaining: 8 forecast objects and 12 observation objects.
> >>>
> >>> Performing matching between the forecast and observation fields.
> >>>
> >>> ?
> >>>
> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
> >>>
> >>> ?
> >>>
> >>> ?
> >>>
> >>> can it be due to version of GSL library? I installed the version
1.11.
> >>>
> >>> Thank you so much for your help.
> >>>
> >>> Best regards.
> >>>
> >>> Sabrina Gentile
> >>>
> >>>
> >>> Sabrina Gentile, Ph.D student
> >>> CETEMPS, University of L'Aquila
> >>> Department of Physics - Atmospheric Sciences
> >>> Via Vetoio, 67010 Coppito L'Aquila
> >>> Italy
> >>> E-mail: sabrina.gentile at aquila.infn.it
> >>>
> >>
> >>
> >>
> >
>
------------------------------------------------
Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
From: Sabrina Gentile
Time: Mon Feb 28 08:04:03 2011
Randy, thank you so much!
Sabrina
Sabrina Gentile, Ph.D student
CETEMPS, University of L'Aquila
Department of Physics - Atmospheric Sciences
Via Vetoio, 67010 Coppito L'Aquila
Italy
E-mail: sabrina.gentile at aquila.infn.it
----- Original Message -----
From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
To: <sabrina.gentile at aquila.infn.it>
Cc: <met_help at ucar.edu>
Sent: Monday, February 28, 2011 3:43 PM
Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>
> Hi -
>
> Sorry for not getting back to you sooner.
>
> I'll look at it early this week.
>
> Randy
>
>
> On Mon, Feb 28, 2011 at 07:03:11AM -0700, RAL HelpDesk {for Sabrina
> Gentile} wrote:
>>
>> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=44618 >
>>
>> Dear Randy,
>> I attached the mail that I sent you a week ago, since I didn't
receive
>> any
>> answer.
>> Is possible to solve this problem?
>> Thank you so much for your help.
>> Best regards.
>>
>> Sabrina Gentile
>>
>> Sabrina Gentile, Ph.D student
>> CETEMPS, University of L'Aquila
>> Department of Physics - Atmospheric Sciences
>> Via Vetoio, 67010 Coppito L'Aquila
>> Italy
>> E-mail: sabrina.gentile at aquila.infn.it
>>
>>
>>
>> ----- Original Message -----
>> From: "RAL HelpDesk {for Sabrina Gentile}" <met_help at ucar.edu>
>> To: <sabrina.gentile at aquila.infn.it>
>> Cc: <met_help at ucar.edu>
>> Sent: Monday, February 21, 2011 11:39 AM
>> Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>>
>>
>> > Dear Randy,
>> > thank you for your reply. I send you some characteristics of our
>> > system.
>> >
>> > Dual Intel(R) Xeon(R) CPU X5450 @ 3.00GHz
>> >
>> > Linux Ubuntu 8.10
>> >
>> > gcc (Ubuntu 4.3.2-1ubuntu12) 4.3.2
>> >
>> > icpc (ICC) 11.0 20090318
>> >
>> > ifort (IFORT) 11.0 20090318
>> >
>> > CXX_FLAGS = -Wall -Wshadow -static
>> >
>> > FC_FLAGS = -static
>> >
>> > GNU Scientific library 1.14
>> >
>> > netcdf library version "3.6.3" compiled with intel compilers
>> >
>> > bufr library compiled with intel compilers
>> >
>> > Flags for NetCDF and BUFR:
>> >
>> > export CC=icc
>> >
>> > export CXX=icpc
>> >
>> > export FC=ifort
>> >
>> > export F77=ifort
>> >
>> > export CFLAGS="-O3 -xHost -axHost -ip -fPIC"
>> >
>> > export CXXFLAGS="-O3 -xHost -axHost -ip -fPIC"
>> >
>> > export FFLAGS="-O3 -xHost -axHost -ip -fPIC"
>> >
>> > export FCFLAGS="-O3 -xHost -axHost -ip -fPIC"
>> >
>> > export LDFLAGS="-i-dynamic"
>> >
>> >
>> >
>> > Please let me know if there is anything else you need.
>> > Best regards.
>> >
>> > Sabrina Gentile
>> >
>> > Sabrina Gentile, Ph.D student
>> > CETEMPS, University of L'Aquila
>> > Department of Physics - Atmospheric Sciences
>> > Via Vetoio, 67010 Coppito L'Aquila
>> > Italy
>> > E-mail: sabrina.gentile at aquila.infn.it
>> >
>> >
>> >
>> >
>> > ----- Original Message -----
>> > From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
>> > To: <sabrina.gentile at aquila.infn.it>
>> > Cc: <met_help at ucar.edu>
>> > Sent: Friday, February 18, 2011 9:23 PM
>> > Subject: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>> >
>> >
>> >>
>> >> Hi -
>> >>
>> >> I'll have to look at the convex hull source code to see what
>> >> the problem might be.
>> >>
>> >> In the meantime, what can you tell me about the operating system
>> >> and cpu in your computer? In particular, do you know if your
>> >> computer is using IEEE 754 floating-point arithmetic?
>> >>
>> >> Thanks
>> >>
>> >> Randy Bullock
>> >>
>> >> On Fri Feb 18 07:25:00 2011, sabrina.gentile at aquila.infn.it
wrote:
>> >>> Hello,
>> >>>
>> >>> I am trying to install the METv3.0 on my system, but I
encountered
>> >>> some problem with the MODE Tool.
>> >>>
>> >>> When I compiled the Makefile I didn't find any error, but if I
run
>> >>> the
>> >>> script inside the folder scripts
>> >>>
>> >>> ./test_mode.sh
>> >>>
>> >>> I obtain this message:
>> >>>
>> >>> *** Running MODE on APCP using netCDF input for both forecast
and
>> >>> observation ***
>> >>>
>> >>> Forecast File:
../out/pcp_combine/sample_fcst_12L_2005080712V_12A.nc
>> >>>
>> >>> Observation File:
../out/pcp_combine/sample_obs_2005080712V_12A.nc
>> >>>
>> >>> Match Config File: config/WrfModeConfig_APCP_12
>> >>>
>> >>> Merge Config File: config/WrfModeConfig_APCP_12
>> >>>
>> >>> Forecast Field: APCP_12 at A12
>> >>>
>> >>> Observation Field: APCP_12 at A12
>> >>>
>> >>> Identifying objects in the forecast and observation fields...
>> >>>
>> >>> Computing contingency table statistics...
>> >>>
>> >>> Identified: 7 forecast objects and 4 observation objects.
>> >>>
>> >>> Performing merging (threshold merging) in the forecast field.
>> >>>
>> >>> Performing merging (threshold merging) in the observation
field.
>> >>>
>> >>> Remaining: 7 forecast objects and 4 observation objects.
>> >>>
>> >>> Performing matching between the forecast and observation
fields.
>> >>>
>> >>> ?
>> >>>
>> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>> >>>
>> >>> ?
>> >>>
>> >>> *** Running MODE on APCP using a GRIB forecast and netCDF
observation
>> >>> ***
>> >>>
>> >>> Forecast File:
>> >>> ../data/sample_fcst/2005080700/wrfprs_ruc13_24.tm00_G212
>> >>>
>> >>> Observation File:
../out/pcp_combine/sample_obs_2005080800V_24A.nc
>> >>>
>> >>> Match Config File: config/WrfModeConfig_APCP_24
>> >>>
>> >>> Merge Config File: config/WrfModeConfig_APCP_24
>> >>>
>> >>> Forecast Field: APCP_24 at A24
>> >>>
>> >>> Observation Field: APCP_24 at A24
>> >>>
>> >>> Identifying objects in the forecast and observation fields...
>> >>>
>> >>> Computing contingency table statistics...
>> >>>
>> >>> Identified: 4 forecast objects and 6 observation objects.
>> >>>
>> >>> Performing merging (no merging) in the forecast field.
>> >>>
>> >>> Performing merging (no merging) in the observation field.
>> >>>
>> >>> Remaining: 4 forecast objects and 6 observation objects.
>> >>>
>> >>> Performing matching between the forecast and observation
fields.
>> >>>
>> >>> ?
>> >>>
>> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>> >>>
>> >>> ?
>> >>>
>> >>> *** Running MODE on RH at 500mb using GRIB input for both
forecast
>> >>> and
>> >>> observation ***
>> >>>
>> >>> Forecast File:
>> >>> ../data/sample_fcst/2005080700/wrfprs_ruc13_12.tm00_G212
>> >>>
>> >>> Observation File:
>> >>> ../data/sample_fcst/2005080712/wrfprs_ruc13_00.tm00_G212
>> >>>
>> >>> Match Config File: config/WrfModeConfig_RH
>> >>>
>> >>> Merge Config File: config/WrfModeConfig_RH
>> >>>
>> >>> Forecast Field: RH at P500
>> >>>
>> >>> Observation Field: RH at P500
>> >>>
>> >>> Identifying objects in the forecast and observation fields...
>> >>>
>> >>> Computing contingency table statistics...
>> >>>
>> >>> Identified: 8 forecast objects and 12 observation objects.
>> >>>
>> >>> Performing merging (no merging) in the forecast field.
>> >>>
>> >>> Performing merging (no merging) in the observation field.
>> >>>
>> >>> Remaining: 8 forecast objects and 12 observation objects.
>> >>>
>> >>> Performing matching between the forecast and observation
fields.
>> >>>
>> >>> ?
>> >>>
>> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>> >>>
>> >>> ?
>> >>>
>> >>> ?
>> >>>
>> >>> can it be due to version of GSL library? I installed the
version
>> >>> 1.11.
>> >>>
>> >>> Thank you so much for your help.
>> >>>
>> >>> Best regards.
>> >>>
>> >>> Sabrina Gentile
>> >>>
>> >>>
>> >>> Sabrina Gentile, Ph.D student
>> >>> CETEMPS, University of L'Aquila
>> >>> Department of Physics - Atmospheric Sciences
>> >>> Via Vetoio, 67010 Coppito L'Aquila
>> >>> Italy
>> >>> E-mail: sabrina.gentile at aquila.infn.it
>> >>>
>> >>
>> >>
>> >>
>> >
>>
>
------------------------------------------------
Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
From: Randy Bullock
Time: Tue Mar 01 14:06:32 2011
Hi Sabrina -
About the trouble you've been having with MODE:
Could you try a few things for me?
Does your MODE run get far enough to write out
the netcdf object files before it crashes?
If so, could you send me that object file?
If I have it, I can use it to debug the
convex hull routine that's been giving you troubles.
If MODE crashes before writing the netcdf object files,
then try running MODE with matching and merging
turned off. That might produce the object files.
If none of the above works, could you send me your
raw data files and the MODE config file you're using?
I'll try to replicate the problem here.
Thanks much.
Randy
On Mon, Feb 28, 2011 at 08:04:04AM -0700, RAL HelpDesk {for Sabrina
Gentile} wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=44618 >
>
> Randy, thank you so much!
>
>
> Sabrina
>
> Sabrina Gentile, Ph.D student
> CETEMPS, University of L'Aquila
> Department of Physics - Atmospheric Sciences
> Via Vetoio, 67010 Coppito L'Aquila
> Italy
> E-mail: sabrina.gentile at aquila.infn.it
>
> ----- Original Message -----
> From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
> To: <sabrina.gentile at aquila.infn.it>
> Cc: <met_help at ucar.edu>
> Sent: Monday, February 28, 2011 3:43 PM
> Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>
>
> >
> > Hi -
> >
> > Sorry for not getting back to you sooner.
> >
> > I'll look at it early this week.
> >
> > Randy
> >
> >
> > On Mon, Feb 28, 2011 at 07:03:11AM -0700, RAL HelpDesk {for
Sabrina
> > Gentile} wrote:
> >>
> >> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=44618 >
> >>
> >> Dear Randy,
> >> I attached the mail that I sent you a week ago, since I didn't
receive
> >> any
> >> answer.
> >> Is possible to solve this problem?
> >> Thank you so much for your help.
> >> Best regards.
> >>
> >> Sabrina Gentile
> >>
> >> Sabrina Gentile, Ph.D student
> >> CETEMPS, University of L'Aquila
> >> Department of Physics - Atmospheric Sciences
> >> Via Vetoio, 67010 Coppito L'Aquila
> >> Italy
> >> E-mail: sabrina.gentile at aquila.infn.it
> >>
> >>
> >>
> >> ----- Original Message -----
> >> From: "RAL HelpDesk {for Sabrina Gentile}" <met_help at ucar.edu>
> >> To: <sabrina.gentile at aquila.infn.it>
> >> Cc: <met_help at ucar.edu>
> >> Sent: Monday, February 21, 2011 11:39 AM
> >> Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
> >>
> >>
> >> > Dear Randy,
> >> > thank you for your reply. I send you some characteristics of
our
> >> > system.
> >> >
> >> > Dual Intel(R) Xeon(R) CPU X5450 @ 3.00GHz
> >> >
> >> > Linux Ubuntu 8.10
> >> >
> >> > gcc (Ubuntu 4.3.2-1ubuntu12) 4.3.2
> >> >
> >> > icpc (ICC) 11.0 20090318
> >> >
> >> > ifort (IFORT) 11.0 20090318
> >> >
> >> > CXX_FLAGS = -Wall -Wshadow -static
> >> >
> >> > FC_FLAGS = -static
> >> >
> >> > GNU Scientific library 1.14
> >> >
> >> > netcdf library version "3.6.3" compiled with intel compilers
> >> >
> >> > bufr library compiled with intel compilers
> >> >
> >> > Flags for NetCDF and BUFR:
> >> >
> >> > export CC=icc
> >> >
> >> > export CXX=icpc
> >> >
> >> > export FC=ifort
> >> >
> >> > export F77=ifort
> >> >
> >> > export CFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >> >
> >> > export CXXFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >> >
> >> > export FFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >> >
> >> > export FCFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >> >
> >> > export LDFLAGS="-i-dynamic"
> >> >
> >> >
> >> >
> >> > Please let me know if there is anything else you need.
> >> > Best regards.
> >> >
> >> > Sabrina Gentile
> >> >
> >> > Sabrina Gentile, Ph.D student
> >> > CETEMPS, University of L'Aquila
> >> > Department of Physics - Atmospheric Sciences
> >> > Via Vetoio, 67010 Coppito L'Aquila
> >> > Italy
> >> > E-mail: sabrina.gentile at aquila.infn.it
> >> >
> >> >
> >> >
> >> >
> >> > ----- Original Message -----
> >> > From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
> >> > To: <sabrina.gentile at aquila.infn.it>
> >> > Cc: <met_help at ucar.edu>
> >> > Sent: Friday, February 18, 2011 9:23 PM
> >> > Subject: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
> >> >
> >> >
> >> >>
> >> >> Hi -
> >> >>
> >> >> I'll have to look at the convex hull source code to see what
> >> >> the problem might be.
> >> >>
> >> >> In the meantime, what can you tell me about the operating
system
> >> >> and cpu in your computer? In particular, do you know if your
> >> >> computer is using IEEE 754 floating-point arithmetic?
> >> >>
> >> >> Thanks
> >> >>
> >> >> Randy Bullock
> >> >>
> >> >> On Fri Feb 18 07:25:00 2011, sabrina.gentile at aquila.infn.it
wrote:
> >> >>> Hello,
> >> >>>
> >> >>> I am trying to install the METv3.0 on my system, but I
encountered
> >> >>> some problem with the MODE Tool.
> >> >>>
> >> >>> When I compiled the Makefile I didn't find any error, but if
I run
> >> >>> the
> >> >>> script inside the folder scripts
> >> >>>
> >> >>> ./test_mode.sh
> >> >>>
> >> >>> I obtain this message:
> >> >>>
> >> >>> *** Running MODE on APCP using netCDF input for both forecast
and
> >> >>> observation ***
> >> >>>
> >> >>> Forecast File:
../out/pcp_combine/sample_fcst_12L_2005080712V_12A.nc
> >> >>>
> >> >>> Observation File:
../out/pcp_combine/sample_obs_2005080712V_12A.nc
> >> >>>
> >> >>> Match Config File: config/WrfModeConfig_APCP_12
> >> >>>
> >> >>> Merge Config File: config/WrfModeConfig_APCP_12
> >> >>>
> >> >>> Forecast Field: APCP_12 at A12
> >> >>>
> >> >>> Observation Field: APCP_12 at A12
> >> >>>
> >> >>> Identifying objects in the forecast and observation fields...
> >> >>>
> >> >>> Computing contingency table statistics...
> >> >>>
> >> >>> Identified: 7 forecast objects and 4 observation objects.
> >> >>>
> >> >>> Performing merging (threshold merging) in the forecast field.
> >> >>>
> >> >>> Performing merging (threshold merging) in the observation
field.
> >> >>>
> >> >>> Remaining: 7 forecast objects and 4 observation objects.
> >> >>>
> >> >>> Performing matching between the forecast and observation
fields.
> >> >>>
> >> >>> ?
> >> >>>
> >> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
> >> >>>
> >> >>> ?
> >> >>>
> >> >>> *** Running MODE on APCP using a GRIB forecast and netCDF
observation
> >> >>> ***
> >> >>>
> >> >>> Forecast File:
> >> >>> ../data/sample_fcst/2005080700/wrfprs_ruc13_24.tm00_G212
> >> >>>
> >> >>> Observation File:
../out/pcp_combine/sample_obs_2005080800V_24A.nc
> >> >>>
> >> >>> Match Config File: config/WrfModeConfig_APCP_24
> >> >>>
> >> >>> Merge Config File: config/WrfModeConfig_APCP_24
> >> >>>
> >> >>> Forecast Field: APCP_24 at A24
> >> >>>
> >> >>> Observation Field: APCP_24 at A24
> >> >>>
> >> >>> Identifying objects in the forecast and observation fields...
> >> >>>
> >> >>> Computing contingency table statistics...
> >> >>>
> >> >>> Identified: 4 forecast objects and 6 observation objects.
> >> >>>
> >> >>> Performing merging (no merging) in the forecast field.
> >> >>>
> >> >>> Performing merging (no merging) in the observation field.
> >> >>>
> >> >>> Remaining: 4 forecast objects and 6 observation objects.
> >> >>>
> >> >>> Performing matching between the forecast and observation
fields.
> >> >>>
> >> >>> ?
> >> >>>
> >> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
> >> >>>
> >> >>> ?
> >> >>>
> >> >>> *** Running MODE on RH at 500mb using GRIB input for both
forecast
> >> >>> and
> >> >>> observation ***
> >> >>>
> >> >>> Forecast File:
> >> >>> ../data/sample_fcst/2005080700/wrfprs_ruc13_12.tm00_G212
> >> >>>
> >> >>> Observation File:
> >> >>> ../data/sample_fcst/2005080712/wrfprs_ruc13_00.tm00_G212
> >> >>>
> >> >>> Match Config File: config/WrfModeConfig_RH
> >> >>>
> >> >>> Merge Config File: config/WrfModeConfig_RH
> >> >>>
> >> >>> Forecast Field: RH at P500
> >> >>>
> >> >>> Observation Field: RH at P500
> >> >>>
> >> >>> Identifying objects in the forecast and observation fields...
> >> >>>
> >> >>> Computing contingency table statistics...
> >> >>>
> >> >>> Identified: 8 forecast objects and 12 observation objects.
> >> >>>
> >> >>> Performing merging (no merging) in the forecast field.
> >> >>>
> >> >>> Performing merging (no merging) in the observation field.
> >> >>>
> >> >>> Remaining: 8 forecast objects and 12 observation objects.
> >> >>>
> >> >>> Performing matching between the forecast and observation
fields.
> >> >>>
> >> >>> ?
> >> >>>
> >> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
> >> >>>
> >> >>> ?
> >> >>>
> >> >>> ?
> >> >>>
> >> >>> can it be due to version of GSL library? I installed the
version
> >> >>> 1.11.
> >> >>>
> >> >>> Thank you so much for your help.
> >> >>>
> >> >>> Best regards.
> >> >>>
> >> >>> Sabrina Gentile
> >> >>>
> >> >>>
> >> >>> Sabrina Gentile, Ph.D student
> >> >>> CETEMPS, University of L'Aquila
> >> >>> Department of Physics - Atmospheric Sciences
> >> >>> Via Vetoio, 67010 Coppito L'Aquila
> >> >>> Italy
> >> >>> E-mail: sabrina.gentile at aquila.infn.it
> >> >>>
> >> >>
> >> >>
> >> >>
> >> >
> >>
> >
>
------------------------------------------------
Subject: MET3.0 MODE convex_hull
From: Sabrina Gentile
Time: Wed Mar 02 06:43:54 2011
Hi Randy,
thank you for your help.
1) No, the MODE crashes before creating the netcdf output file.
2) I setted in the configure file the "match_flag=0" and I runned
MODE, but
it didn't create output files.
3) I attached to the mail the config file and I'm using the data of
the
tutorial, the command line that I use is:
bin/mode \
tutorial/out/pcp_combine/sample_fcst_24L_2005080800V_12A.nc \
tutorial/out/pcp_combine/sample_obs_2005080800V_12A.nc \
tutorial/config/WrfModeConfig_tutorial \
-outdir tutorial/out/mode \
-v 2
I hope that it is sufficient to understand the problem.
Thank you so much.
Sabrina
----- Original Message -----
From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
To: <sabrina.gentile at aquila.infn.it>
Cc: <met_help at ucar.edu>
Sent: Tuesday, March 01, 2011 10:06 PM
Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>
> Hi Sabrina -
>
> About the trouble you've been having with MODE:
>
> Could you try a few things for me?
>
> Does your MODE run get far enough to write out
> the netcdf object files before it crashes?
> If so, could you send me that object file?
> If I have it, I can use it to debug the
> convex hull routine that's been giving you troubles.
>
> If MODE crashes before writing the netcdf object files,
> then try running MODE with matching and merging
> turned off. That might produce the object files.
>
> If none of the above works, could you send me your
> raw data files and the MODE config file you're using?
> I'll try to replicate the problem here.
>
> Thanks much.
>
> Randy
>
>
> On Mon, Feb 28, 2011 at 08:04:04AM -0700, RAL HelpDesk {for Sabrina
> Gentile} wrote:
>>
>> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=44618 >
>>
>> Randy, thank you so much!
>>
>>
>> Sabrina
>>
>> Sabrina Gentile, Ph.D student
>> CETEMPS, University of L'Aquila
>> Department of Physics - Atmospheric Sciences
>> Via Vetoio, 67010 Coppito L'Aquila
>> Italy
>> E-mail: sabrina.gentile at aquila.infn.it
>>
>> ----- Original Message -----
>> From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
>> To: <sabrina.gentile at aquila.infn.it>
>> Cc: <met_help at ucar.edu>
>> Sent: Monday, February 28, 2011 3:43 PM
>> Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>>
>>
>> >
>> > Hi -
>> >
>> > Sorry for not getting back to you sooner.
>> >
>> > I'll look at it early this week.
>> >
>> > Randy
>> >
>> >
>> > On Mon, Feb 28, 2011 at 07:03:11AM -0700, RAL HelpDesk {for
Sabrina
>> > Gentile} wrote:
>> >>
>> >> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=44618 >
>> >>
>> >> Dear Randy,
>> >> I attached the mail that I sent you a week ago, since I didn't
receive
>> >> any
>> >> answer.
>> >> Is possible to solve this problem?
>> >> Thank you so much for your help.
>> >> Best regards.
>> >>
>> >> Sabrina Gentile
>> >>
>> >> Sabrina Gentile, Ph.D student
>> >> CETEMPS, University of L'Aquila
>> >> Department of Physics - Atmospheric Sciences
>> >> Via Vetoio, 67010 Coppito L'Aquila
>> >> Italy
>> >> E-mail: sabrina.gentile at aquila.infn.it
>> >>
>> >>
>> >>
>> >> ----- Original Message -----
>> >> From: "RAL HelpDesk {for Sabrina Gentile}" <met_help at ucar.edu>
>> >> To: <sabrina.gentile at aquila.infn.it>
>> >> Cc: <met_help at ucar.edu>
>> >> Sent: Monday, February 21, 2011 11:39 AM
>> >> Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>> >>
>> >>
>> >> > Dear Randy,
>> >> > thank you for your reply. I send you some characteristics of
our
>> >> > system.
>> >> >
>> >> > Dual Intel(R) Xeon(R) CPU X5450 @ 3.00GHz
>> >> >
>> >> > Linux Ubuntu 8.10
>> >> >
>> >> > gcc (Ubuntu 4.3.2-1ubuntu12) 4.3.2
>> >> >
>> >> > icpc (ICC) 11.0 20090318
>> >> >
>> >> > ifort (IFORT) 11.0 20090318
>> >> >
>> >> > CXX_FLAGS = -Wall -Wshadow -static
>> >> >
>> >> > FC_FLAGS = -static
>> >> >
>> >> > GNU Scientific library 1.14
>> >> >
>> >> > netcdf library version "3.6.3" compiled with intel compilers
>> >> >
>> >> > bufr library compiled with intel compilers
>> >> >
>> >> > Flags for NetCDF and BUFR:
>> >> >
>> >> > export CC=icc
>> >> >
>> >> > export CXX=icpc
>> >> >
>> >> > export FC=ifort
>> >> >
>> >> > export F77=ifort
>> >> >
>> >> > export CFLAGS="-O3 -xHost -axHost -ip -fPIC"
>> >> >
>> >> > export CXXFLAGS="-O3 -xHost -axHost -ip -fPIC"
>> >> >
>> >> > export FFLAGS="-O3 -xHost -axHost -ip -fPIC"
>> >> >
>> >> > export FCFLAGS="-O3 -xHost -axHost -ip -fPIC"
>> >> >
>> >> > export LDFLAGS="-i-dynamic"
>> >> >
>> >> >
>> >> >
>> >> > Please let me know if there is anything else you need.
>> >> > Best regards.
>> >> >
>> >> > Sabrina Gentile
>> >> >
>> >> > Sabrina Gentile, Ph.D student
>> >> > CETEMPS, University of L'Aquila
>> >> > Department of Physics - Atmospheric Sciences
>> >> > Via Vetoio, 67010 Coppito L'Aquila
>> >> > Italy
>> >> > E-mail: sabrina.gentile at aquila.infn.it
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > ----- Original Message -----
>> >> > From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
>> >> > To: <sabrina.gentile at aquila.infn.it>
>> >> > Cc: <met_help at ucar.edu>
>> >> > Sent: Friday, February 18, 2011 9:23 PM
>> >> > Subject: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>> >> >
>> >> >
>> >> >>
>> >> >> Hi -
>> >> >>
>> >> >> I'll have to look at the convex hull source code to see what
>> >> >> the problem might be.
>> >> >>
>> >> >> In the meantime, what can you tell me about the operating
system
>> >> >> and cpu in your computer? In particular, do you know if your
>> >> >> computer is using IEEE 754 floating-point arithmetic?
>> >> >>
>> >> >> Thanks
>> >> >>
>> >> >> Randy Bullock
>> >> >>
>> >> >> On Fri Feb 18 07:25:00 2011, sabrina.gentile at aquila.infn.it
wrote:
>> >> >>> Hello,
>> >> >>>
>> >> >>> I am trying to install the METv3.0 on my system, but I
encountered
>> >> >>> some problem with the MODE Tool.
>> >> >>>
>> >> >>> When I compiled the Makefile I didn't find any error, but if
I run
>> >> >>> the
>> >> >>> script inside the folder scripts
>> >> >>>
>> >> >>> ./test_mode.sh
>> >> >>>
>> >> >>> I obtain this message:
>> >> >>>
>> >> >>> *** Running MODE on APCP using netCDF input for both
forecast and
>> >> >>> observation ***
>> >> >>>
>> >> >>> Forecast File:
>> >> >>> ../out/pcp_combine/sample_fcst_12L_2005080712V_12A.nc
>> >> >>>
>> >> >>> Observation File:
../out/pcp_combine/sample_obs_2005080712V_12A.nc
>> >> >>>
>> >> >>> Match Config File: config/WrfModeConfig_APCP_12
>> >> >>>
>> >> >>> Merge Config File: config/WrfModeConfig_APCP_12
>> >> >>>
>> >> >>> Forecast Field: APCP_12 at A12
>> >> >>>
>> >> >>> Observation Field: APCP_12 at A12
>> >> >>>
>> >> >>> Identifying objects in the forecast and observation
fields...
>> >> >>>
>> >> >>> Computing contingency table statistics...
>> >> >>>
>> >> >>> Identified: 7 forecast objects and 4 observation objects.
>> >> >>>
>> >> >>> Performing merging (threshold merging) in the forecast
field.
>> >> >>>
>> >> >>> Performing merging (threshold merging) in the observation
field.
>> >> >>>
>> >> >>> Remaining: 7 forecast objects and 4 observation objects.
>> >> >>>
>> >> >>> Performing matching between the forecast and observation
fields.
>> >> >>>
>> >> >>> ?
>> >> >>>
>> >> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>> >> >>>
>> >> >>> ?
>> >> >>>
>> >> >>> *** Running MODE on APCP using a GRIB forecast and netCDF
>> >> >>> observation
>> >> >>> ***
>> >> >>>
>> >> >>> Forecast File:
>> >> >>> ../data/sample_fcst/2005080700/wrfprs_ruc13_24.tm00_G212
>> >> >>>
>> >> >>> Observation File:
../out/pcp_combine/sample_obs_2005080800V_24A.nc
>> >> >>>
>> >> >>> Match Config File: config/WrfModeConfig_APCP_24
>> >> >>>
>> >> >>> Merge Config File: config/WrfModeConfig_APCP_24
>> >> >>>
>> >> >>> Forecast Field: APCP_24 at A24
>> >> >>>
>> >> >>> Observation Field: APCP_24 at A24
>> >> >>>
>> >> >>> Identifying objects in the forecast and observation
fields...
>> >> >>>
>> >> >>> Computing contingency table statistics...
>> >> >>>
>> >> >>> Identified: 4 forecast objects and 6 observation objects.
>> >> >>>
>> >> >>> Performing merging (no merging) in the forecast field.
>> >> >>>
>> >> >>> Performing merging (no merging) in the observation field.
>> >> >>>
>> >> >>> Remaining: 4 forecast objects and 6 observation objects.
>> >> >>>
>> >> >>> Performing matching between the forecast and observation
fields.
>> >> >>>
>> >> >>> ?
>> >> >>>
>> >> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>> >> >>>
>> >> >>> ?
>> >> >>>
>> >> >>> *** Running MODE on RH at 500mb using GRIB input for both
forecast
>> >> >>> and
>> >> >>> observation ***
>> >> >>>
>> >> >>> Forecast File:
>> >> >>> ../data/sample_fcst/2005080700/wrfprs_ruc13_12.tm00_G212
>> >> >>>
>> >> >>> Observation File:
>> >> >>> ../data/sample_fcst/2005080712/wrfprs_ruc13_00.tm00_G212
>> >> >>>
>> >> >>> Match Config File: config/WrfModeConfig_RH
>> >> >>>
>> >> >>> Merge Config File: config/WrfModeConfig_RH
>> >> >>>
>> >> >>> Forecast Field: RH at P500
>> >> >>>
>> >> >>> Observation Field: RH at P500
>> >> >>>
>> >> >>> Identifying objects in the forecast and observation
fields...
>> >> >>>
>> >> >>> Computing contingency table statistics...
>> >> >>>
>> >> >>> Identified: 8 forecast objects and 12 observation objects.
>> >> >>>
>> >> >>> Performing merging (no merging) in the forecast field.
>> >> >>>
>> >> >>> Performing merging (no merging) in the observation field.
>> >> >>>
>> >> >>> Remaining: 8 forecast objects and 12 observation objects.
>> >> >>>
>> >> >>> Performing matching between the forecast and observation
fields.
>> >> >>>
>> >> >>> ?
>> >> >>>
>> >> >>> ERROR: convex_hull(Polyline &) -> can't find next hull point
>> >> >>>
>> >> >>> ?
>> >> >>>
>> >> >>> ?
>> >> >>>
>> >> >>> can it be due to version of GSL library? I installed the
version
>> >> >>> 1.11.
>> >> >>>
>> >> >>> Thank you so much for your help.
>> >> >>>
>> >> >>> Best regards.
>> >> >>>
>> >> >>> Sabrina Gentile
>> >> >>>
>> >> >>>
>> >> >>> Sabrina Gentile, Ph.D student
>> >> >>> CETEMPS, University of L'Aquila
>> >> >>> Department of Physics - Atmospheric Sciences
>> >> >>> Via Vetoio, 67010 Coppito L'Aquila
>> >> >>> Italy
>> >> >>> E-mail: sabrina.gentile at aquila.infn.it
>> >> >>>
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >>
>> >
>>
>
------------------------------------------------
Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
From: Randy Bullock
Time: Wed Mar 02 13:19:59 2011
Sabrina -
I'd like you to try one more thing, if you would.
Could you run MODE on some of your own data
(I mean whatever data you were planning to use
MODE on, not the test data that comes with the MET tarball)
and see if you get the same error? If you do, could you
send me the data files and the config file?
I need to be able to reproduce this error on my end,
or I can't debug it. The test data from the tarball
runs without error on our system, so I can't use that
to pin down the trouble.
Thanks.
Randy
On Wed, Mar 02, 2011 at 06:43:55AM -0700, RAL HelpDesk {for Sabrina
Gentile} wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=44618 >
>
> Hi Randy,
> thank you for your help.
>
> 1) No, the MODE crashes before creating the netcdf output file.
>
> 2) I setted in the configure file the "match_flag=0" and I runned
MODE, but
> it didn't create output files.
>
> 3) I attached to the mail the config file and I'm using the data of
the
> tutorial, the command line that I use is:
>
> bin/mode \
> tutorial/out/pcp_combine/sample_fcst_24L_2005080800V_12A.nc \
> tutorial/out/pcp_combine/sample_obs_2005080800V_12A.nc \
> tutorial/config/WrfModeConfig_tutorial \
> -outdir tutorial/out/mode \
> -v 2
>
> I hope that it is sufficient to understand the problem.
> Thank you so much.
>
> Sabrina
>
> ----- Original Message -----
> From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
> To: <sabrina.gentile at aquila.infn.it>
> Cc: <met_help at ucar.edu>
> Sent: Tuesday, March 01, 2011 10:06 PM
> Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
>
>
> >
> > Hi Sabrina -
> >
> > About the trouble you've been having with MODE:
> >
> > Could you try a few things for me?
> >
> > Does your MODE run get far enough to write out
> > the netcdf object files before it crashes?
> > If so, could you send me that object file?
> > If I have it, I can use it to debug the
> > convex hull routine that's been giving you troubles.
> >
> > If MODE crashes before writing the netcdf object files,
> > then try running MODE with matching and merging
> > turned off. That might produce the object files.
> >
> > If none of the above works, could you send me your
> > raw data files and the MODE config file you're using?
> > I'll try to replicate the problem here.
> >
> > Thanks much.
> >
> > Randy
> >
> >
> > On Mon, Feb 28, 2011 at 08:04:04AM -0700, RAL HelpDesk {for
Sabrina
> > Gentile} wrote:
> >>
> >> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=44618 >
> >>
> >> Randy, thank you so much!
> >>
> >>
> >> Sabrina
> >>
> >> Sabrina Gentile, Ph.D student
> >> CETEMPS, University of L'Aquila
> >> Department of Physics - Atmospheric Sciences
> >> Via Vetoio, 67010 Coppito L'Aquila
> >> Italy
> >> E-mail: sabrina.gentile at aquila.infn.it
> >>
> >> ----- Original Message -----
> >> From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
> >> To: <sabrina.gentile at aquila.infn.it>
> >> Cc: <met_help at ucar.edu>
> >> Sent: Monday, February 28, 2011 3:43 PM
> >> Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
> >>
> >>
> >> >
> >> > Hi -
> >> >
> >> > Sorry for not getting back to you sooner.
> >> >
> >> > I'll look at it early this week.
> >> >
> >> > Randy
> >> >
> >> >
> >> > On Mon, Feb 28, 2011 at 07:03:11AM -0700, RAL HelpDesk {for
Sabrina
> >> > Gentile} wrote:
> >> >>
> >> >> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=44618
>
> >> >>
> >> >> Dear Randy,
> >> >> I attached the mail that I sent you a week ago, since I didn't
receive
> >> >> any
> >> >> answer.
> >> >> Is possible to solve this problem?
> >> >> Thank you so much for your help.
> >> >> Best regards.
> >> >>
> >> >> Sabrina Gentile
> >> >>
> >> >> Sabrina Gentile, Ph.D student
> >> >> CETEMPS, University of L'Aquila
> >> >> Department of Physics - Atmospheric Sciences
> >> >> Via Vetoio, 67010 Coppito L'Aquila
> >> >> Italy
> >> >> E-mail: sabrina.gentile at aquila.infn.it
> >> >>
> >> >>
> >> >>
> >> >> ----- Original Message -----
> >> >> From: "RAL HelpDesk {for Sabrina Gentile}" <met_help at ucar.edu>
> >> >> To: <sabrina.gentile at aquila.infn.it>
> >> >> Cc: <met_help at ucar.edu>
> >> >> Sent: Monday, February 21, 2011 11:39 AM
> >> >> Subject: Re: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
> >> >>
> >> >>
> >> >> > Dear Randy,
> >> >> > thank you for your reply. I send you some characteristics of
our
> >> >> > system.
> >> >> >
> >> >> > Dual Intel(R) Xeon(R) CPU X5450 @ 3.00GHz
> >> >> >
> >> >> > Linux Ubuntu 8.10
> >> >> >
> >> >> > gcc (Ubuntu 4.3.2-1ubuntu12) 4.3.2
> >> >> >
> >> >> > icpc (ICC) 11.0 20090318
> >> >> >
> >> >> > ifort (IFORT) 11.0 20090318
> >> >> >
> >> >> > CXX_FLAGS = -Wall -Wshadow -static
> >> >> >
> >> >> > FC_FLAGS = -static
> >> >> >
> >> >> > GNU Scientific library 1.14
> >> >> >
> >> >> > netcdf library version "3.6.3" compiled with intel compilers
> >> >> >
> >> >> > bufr library compiled with intel compilers
> >> >> >
> >> >> > Flags for NetCDF and BUFR:
> >> >> >
> >> >> > export CC=icc
> >> >> >
> >> >> > export CXX=icpc
> >> >> >
> >> >> > export FC=ifort
> >> >> >
> >> >> > export F77=ifort
> >> >> >
> >> >> > export CFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >> >> >
> >> >> > export CXXFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >> >> >
> >> >> > export FFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >> >> >
> >> >> > export FCFLAGS="-O3 -xHost -axHost -ip -fPIC"
> >> >> >
> >> >> > export LDFLAGS="-i-dynamic"
> >> >> >
> >> >> >
> >> >> >
> >> >> > Please let me know if there is anything else you need.
> >> >> > Best regards.
> >> >> >
> >> >> > Sabrina Gentile
> >> >> >
> >> >> > Sabrina Gentile, Ph.D student
> >> >> > CETEMPS, University of L'Aquila
> >> >> > Department of Physics - Atmospheric Sciences
> >> >> > Via Vetoio, 67010 Coppito L'Aquila
> >> >> > Italy
> >> >> > E-mail: sabrina.gentile at aquila.infn.it
> >> >> >
> >> >> >
> >> >> >
> >> >> >
> >> >> > ----- Original Message -----
> >> >> > From: "RAL HelpDesk {for Randy Bullock}" <met_help at ucar.edu>
> >> >> > To: <sabrina.gentile at aquila.infn.it>
> >> >> > Cc: <met_help at ucar.edu>
> >> >> > Sent: Friday, February 18, 2011 9:23 PM
> >> >> > Subject: [rt.rap.ucar.edu #44618] MET3.0 MODE convex_hull
> >> >> >
> >> >> >
> >> >> >>
> >> >> >> Hi -
> >> >> >>
> >> >> >> I'll have to look at the convex hull source code to see
what
> >> >> >> the problem might be.
> >> >> >>
> >> >> >> In the meantime, what can you tell me about the operating
system
> >> >> >> and cpu in your computer? In particular, do you know if
your
> >> >> >> computer is using IEEE 754 floating-point arithmetic?
> >> >> >>
> >> >> >> Thanks
> >> >> >>
> >> >> >> Randy Bullock
> >> >> >>
> >> >> >> On Fri Feb 18 07:25:00 2011, sabrina.gentile at aquila.infn.it
wrote:
> >> >> >>> Hello,
> >> >> >>>
> >> >> >>> I am trying to install the METv3.0 on my system, but I
encountered
> >> >> >>> some problem with the MODE Tool.
> >> >> >>>
> >> >> >>> When I compiled the Makefile I didn't find any error, but
if I run
> >> >> >>> the
> >> >> >>> script inside the folder scripts
> >> >> >>>
> >> >> >>> ./test_mode.sh
> >> >> >>>
> >> >> >>> I obtain this message:
> >> >> >>>
> >> >> >>> *** Running MODE on APCP using netCDF input for both
forecast and
> >> >> >>> observation ***
> >> >> >>>
> >> >> >>> Forecast File:
> >> >> >>> ../out/pcp_combine/sample_fcst_12L_2005080712V_12A.nc
> >> >> >>>
> >> >> >>> Observation File:
../out/pcp_combine/sample_obs_2005080712V_12A.nc
> >> >> >>>
> >> >> >>> Match Config File: config/WrfModeConfig_APCP_12
> >> >> >>>
> >> >> >>> Merge Config File: config/WrfModeConfig_APCP_12
> >> >> >>>
> >> >> >>> Forecast Field: APCP_12 at A12
> >> >> >>>
> >> >> >>> Observation Field: APCP_12 at A12
> >> >> >>>
> >> >> >>> Identifying objects in the forecast and observation
fields...
> >> >> >>>
> >> >> >>> Computing contingency table statistics...
> >> >> >>>
> >> >> >>> Identified: 7 forecast objects and 4 observation objects.
> >> >> >>>
> >> >> >>> Performing merging (threshold merging) in the forecast
field.
> >> >> >>>
> >> >> >>> Performing merging (threshold merging) in the observation
field.
> >> >> >>>
> >> >> >>> Remaining: 7 forecast objects and 4 observation objects.
> >> >> >>>
> >> >> >>> Performing matching between the forecast and observation
fields.
> >> >> >>>
> >> >> >>> ?
> >> >> >>>
> >> >> >>> ERROR: convex_hull(Polyline &) -> can't find next hull
point
> >> >> >>>
> >> >> >>> ?
> >> >> >>>
> >> >> >>> *** Running MODE on APCP using a GRIB forecast and netCDF
> >> >> >>> observation
> >> >> >>> ***
> >> >> >>>
> >> >> >>> Forecast File:
> >> >> >>> ../data/sample_fcst/2005080700/wrfprs_ruc13_24.tm00_G212
> >> >> >>>
> >> >> >>> Observation File:
../out/pcp_combine/sample_obs_2005080800V_24A.nc
> >> >> >>>
> >> >> >>> Match Config File: config/WrfModeConfig_APCP_24
> >> >> >>>
> >> >> >>> Merge Config File: config/WrfModeConfig_APCP_24
> >> >> >>>
> >> >> >>> Forecast Field: APCP_24 at A24
> >> >> >>>
> >> >> >>> Observation Field: APCP_24 at A24
> >> >> >>>
> >> >> >>> Identifying objects in the forecast and observation
fields...
> >> >> >>>
> >> >> >>> Computing contingency table statistics...
> >> >> >>>
> >> >> >>> Identified: 4 forecast objects and 6 observation objects.
> >> >> >>>
> >> >> >>> Performing merging (no merging) in the forecast field.
> >> >> >>>
> >> >> >>> Performing merging (no merging) in the observation field.
> >> >> >>>
> >> >> >>> Remaining: 4 forecast objects and 6 observation objects.
> >> >> >>>
> >> >> >>> Performing matching between the forecast and observation
fields.
> >> >> >>>
> >> >> >>> ?
> >> >> >>>
> >> >> >>> ERROR: convex_hull(Polyline &) -> can't find next hull
point
> >> >> >>>
> >> >> >>> ?
> >> >> >>>
> >> >> >>> *** Running MODE on RH at 500mb using GRIB input for both
forecast
> >> >> >>> and
> >> >> >>> observation ***
> >> >> >>>
> >> >> >>> Forecast File:
> >> >> >>> ../data/sample_fcst/2005080700/wrfprs_ruc13_12.tm00_G212
> >> >> >>>
> >> >> >>> Observation File:
> >> >> >>> ../data/sample_fcst/2005080712/wrfprs_ruc13_00.tm00_G212
> >> >> >>>
> >> >> >>> Match Config File: config/WrfModeConfig_RH
> >> >> >>>
> >> >> >>> Merge Config File: config/WrfModeConfig_RH
> >> >> >>>
> >> >> >>> Forecast Field: RH at P500
> >> >> >>>
> >> >> >>> Observation Field: RH at P500
> >> >> >>>
> >> >> >>> Identifying objects in the forecast and observation
fields...
> >> >> >>>
> >> >> >>> Computing contingency table statistics...
> >> >> >>>
> >> >> >>> Identified: 8 forecast objects and 12 observation objects.
> >> >> >>>
> >> >> >>> Performing merging (no merging) in the forecast field.
> >> >> >>>
> >> >> >>> Performing merging (no merging) in the observation field.
> >> >> >>>
> >> >> >>> Remaining: 8 forecast objects and 12 observation objects.
> >> >> >>>
> >> >> >>> Performing matching between the forecast and observation
fields.
> >> >> >>>
> >> >> >>> ?
> >> >> >>>
> >> >> >>> ERROR: convex_hull(Polyline &) -> can't find next hull
point
> >> >> >>>
> >> >> >>> ?
> >> >> >>>
> >> >> >>> ?
> >> >> >>>
> >> >> >>> can it be due to version of GSL library? I installed the
version
> >> >> >>> 1.11.
> >> >> >>>
> >> >> >>> Thank you so much for your help.
> >> >> >>>
> >> >> >>> Best regards.
> >> >> >>>
> >> >> >>> Sabrina Gentile
> >> >> >>>
> >> >> >>>
> >> >> >>> Sabrina Gentile, Ph.D student
> >> >> >>> CETEMPS, University of L'Aquila
> >> >> >>> Department of Physics - Atmospheric Sciences
> >> >> >>> Via Vetoio, 67010 Coppito L'Aquila
> >> >> >>> Italy
> >> >> >>> E-mail: sabrina.gentile at aquila.infn.it
> >> >> >>>
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >
> >> >>
> >> >
> >>
> >
>
------------------------------------------------
More information about the Met_help
mailing list