[ncl-talk] set_dimension_query

David Brown dbrown at ucar.edu
Wed Oct 4 12:08:53 MDT 2017


Hi Kunai,
The lat2d and lon2d attributes are only recognized by the NCL graphics
routines. NetCDF only supports attributes with no more than 1
dimension. When you have 2d coordinates you should just write them
directly to the NetCDF file as separate variables. Furthermore your 2d
coordinates should have the same dimension names as the data variable
and to be CF compliant the data variable should have a coordinates
attribute that lists the names of the coordinate variables.

So if you want the coordinates to be named "lat" and "lon", then you
should introduce two new dimension names, for example, "x" and "y",
that will be shared by the data variable and the coordinate variables:

So replace this code:

 lat!0 = "lat"
 ; lat&lat = lat
 lon!0 = "lon"
; lon&lon = lon

 var!0 = "lat"    ; you can name these dimensions whatever you want..
 var!1 = "lon"
; var&lat = lat     ; but make sure you refer to the correct named dimensions
; var&lon = lon

 var at lat2d = lat
 var at lon2d = lon

with

lat!0 = "y"
lat!1 = "x"
lon!0 = "y"
lon!1 = "x"
var!0 = "x'
var!1 = "y"

var at coordinates = "lat lon"

then add after (or before - it shouldn't matter) this line:

ncdf->var = var

ncdf->lat = lat
ncfd->lon = lon


Hope this helps.
 -dave




On Wed, Oct 4, 2017 at 3:05 AM, Kunal Bali <kunal.bali9 at gmail.com> wrote:
> Hello Rick sir, I tried your suggestion, but it did not work.
>
> because lons and lats are not in the a
> That's why it shows the error variable (lons) is not in file (a)
> So, I removed the part from the given script (below) and then tried. But
> still not succeed in generating the netcdf file.
>
> please let me know if you have any more suggestions.
>
> ;----------------------------------------------------------------------
>
> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"
> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"
> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/contributed.ncl"
>
> begin
> ;---Read data
>       a =
> addfile("/Users/Pushp/Desktop/test/MAIACTAOT.h01v03.20003660525.hdf","r")
>       var  = short2flt(a->Optical_Depth_055(:,:))
>
>       x = fspan(-3450000.+500., -2250000.-500., 1200)
>       y = fspan(400000.-500., -800000.+500., 1200)
>
>       x := conform_dims((/1200, 1200/), x, 1)
>       y := conform_dims((/1200, 1200/), y, 0)
>
>
>       src = "+proj=aea +lat_0=23.0 +lat_1=21d03m +lat_2=41 +lon_0=102
> +ellps=clrk66"
>       dst = "+proj=latlon +ellps=sphere"
>       x := flt2dble(ndtooned(x))
>       y := flt2dble(ndtooned(y))
>       z = x   ; A quick-n-dirty way to get an empty Z array of same
> dimensions/type
>       z = 0.   ;
>       transform_coordinate(src, dst, x, y, z)
>
>     ; convert back to curvilinear coord arrays
>       lon = onedtond(x, (/1200, 1200/))
>       lat = onedtond(y, (/1200, 1200/))
>
>     ; print(lat)   ; check that these are the correct coordinates
>     ; print(lon)   ; check that these are the correct coordinates
>
>       lat at units = "degrees_north"
>       lon at units = "degrees_east"
>
>       lat!0 = "lat"
>     ; lat&lat = lat
>       lon!0 = "lon"
>     ; lon&lon = lon
>
>       var!0 = "lat"    ; you can name these dimensions whatever you want..
>       var!1 = "lon"
>     ; var&lat = lat     ; but make sure you refer to the correct named
> dimensions
>     ; var&lon = lon
>
>       var at lat2d = lat
>       var at lon2d = lon
>
>       system("/bin/rm -f simple_new.nc")
>       ncdf = addfile("simple_new.nc" ,"c")  ; open output netCDF file
>
>     ;===================================================================
>     ; create global attributes of the file (optional)
>     ;===================================================================
>        fAtt               = True            ; assign file attributes
>        fAtt at title         = "NCL Simple Approach to netCDF Creation"
>        fAtt at source_file   =  "original-file.nc"
>        fAtt at Conventions   = "None"
>        fAtt at creation_date = systemfunc ("date")
>        fileattdef( ncdf, fAtt )            ; copy file attributes
>
>        ncdf->var = var
>
> end
>
>
> Kunal Bali
> Research Scholar
> Radio & Atmospheric Science Division
> CSIR - National Physical Laboratory
> New Delhi - 110012
> India
>
>
>
>
>
> On Tue, Oct 3, 2017 at 9:24 PM, Rick Brownrigg <brownrig at ucar.edu> wrote:
>>
>> Hi Kunal,
>>
>> Sorry for the delay in response -- I have been travelling.  I am not
>> expert at the issue of 2D coordinates, and have not had a chance to
>> experiment/explore the issue. My very limited understanding is that with 2D,
>> you don't need to do this sort of stuff:
>>
>>      var!0 = "lat"    ; you can name these dimensions whatever you want..
>>         var!1 = "lon"
>> ;        var&lat = lat     ; but make sure you refer to the correct named
>> dimensions
>> ;        var&lon = lon
>>
>> Rather, you would write to NetCDF your variable and the 2D coordinate
>> arrays computed via transform_coordinate() as just regular variables.  When
>> you want to read and plot that NetCDF, you need to read the variable along
>> the 2D arrays, and assign them as attributes to the variable, named very
>> specifically lat2d and lon2d:
>>
>>      myVar = f->var
>>      lons = f->lons   ; doesn't matter what the actual names are
>>     lats = f->lats      ;   ditto
>>
>>     myVar at lat2d = lats
>>     myVar at lon2d = lons
>>
>>     plot = gsn_xxxxxx(wks, myVar,....)
>>
>> Again, this is my limited understand and untested.  There's more
>> information at thes page, and in particular example #3:
>>
>> http://www.ncl.ucar.edu/Applications/plot_data_on_map.shtml
>>
>> http://www.ncl.ucar.edu/Applications/plot_data_on_map.shtml#ex3
>>
>>
>> It looks like your 2D coordinate variables may need a "degrees_north"
>> ,etc. attribute (see the example).
>>
>> One of my colleagues further offers this guidance:
>>
>> "Also to be CF compliant and for ease of use as well, all variables
>> that use these coordinates should have a "coordinates" attribute that
>> lists each of these coordinates by name separated by spaces. See the
>> CF document for details."
>>
>> I hope that helps...
>> Rick
>>
>> On Sat, Sep 30, 2017 at 1:25 PM, Kunal Bali <kunal.bali9 at gmail.com> wrote:
>>>
>>> Thank You so much, Rick Sir for providing all these valuable information.
>>> It's little complex to me but I am trying to understand.
>>>
>>> However, I am trying to convert this hdf file into netcdf by
>>> incorporating your code. But file did not convert with Geo2D. please check
>>> the code below if you have time.
>>>
>>> begin
>>> ;---Read data
>>>         a =
>>> addfile("/home/kunal/mishra_sir/MAIACTAOT.h00v02.20000570505.hdf","r")
>>>         var  = short2flt(a->Optical_Depth_055(:,:))
>>>
>>>       x = fspan(-3450000.+500., -2250000.-500., 1200)
>>>       y = fspan(1600000.-500., 400000.+500., 1200)
>>>
>>>       x := conform_dims((/1200, 1200/), x, 1)
>>>       y := conform_dims((/1200, 1200/), y, 0)
>>>
>>>
>>>       src = "+proj=aea +lat_0=23.0 +lat_1=21d03m +lat_2=41 +lon_0=102
>>> +ellps=clrk66"
>>>       dst = "+proj=latlon +ellps=sphere"
>>>       x := flt2dble(ndtooned(x))
>>>       y := flt2dble(ndtooned(y))
>>>       z = x   ; A quick-n-dirty way to get an empty Z array of same
>>> dimensions/type
>>>       z = 0.   ;
>>>       transform_coordinate(src, dst, x, y, z)
>>>
>>>       ; convert back to curvilinear coord arrays
>>>       lon = onedtond(x, (/1200, 1200/))
>>>       lat = onedtond(y, (/1200, 1200/))
>>>
>>>      lat at units = "degrees_north"
>>>     lat!0 = "lat"
>>> ;    lat&lat = lat
>>>     lon at units = "degrees_east"
>>>     lon!0 = "lon"
>>> ;    lon&lon = lon
>>>
>>>         var!0 = "lat"    ; you can name these dimensions whatever you
>>> want..
>>>         var!1 = "lon"
>>> ;        var&lat = lat     ; but make sure you refer to the correct named
>>> dimensions
>>> ;        var&lon = lon
>>>
>>>
>>>
>>>             ;     system("/bin/rm -f simple1.nc")
>>>              ncdf = addfile("simple3.nc" ,"c")  ; open output netCDF file
>>>
>>>     ;===================================================================
>>>     ; create global attributes of the file (optional)
>>>     ;===================================================================
>>>        fAtt               = True            ; assign file attributes
>>>        fAtt at title         = "NCL Simple Approach to netCDF Creation"
>>>        fAtt at source_file   =  "original-file.nc"
>>>        fAtt at Conventions   = "None"
>>>        fAtt at creation_date = systemfunc ("date")
>>>        fileattdef( ncdf, fAtt )            ; copy file attributes
>>>
>>>     ;===================================================================
>>>     ; make time an UNLIMITED dimension; recommended  for most
>>> applications
>>>     ;===================================================================
>>>
>>>        ncdf->var = var
>>>
>>>
>>> end
>>>
>>>
>>>
>>>
>>>
>>> Kunal Bali
>>>
>>>
>>>
>>>
>>> On Sat, Sep 30, 2017 at 10:15 PM, Rick Brownrigg <brownrig at ucar.edu>
>>> wrote:
>>>>
>>>> Hi,
>>>>
>>>> This file is an interesting and challenging one to geo-reference.
>>>> Without proper documentation on how the file is constructed/encoded, all of
>>>> what follows is speculation. But I'm fairly confident it is sound.
>>>>
>>>> In the group GRID_1, there are these parameters:
>>>>
>>>>   GridName="grid1km"
>>>>   XDim=1200
>>>>   YDim=1200
>>>>   UpperLeftPointMtrs=(-3450000.000000,1600000.000000)
>>>>   LowerRightMtrs=(-2250000.000000,400000.000000)
>>>>   Projection=GCTP_ALBERS
>>>>   ProjParams=(0,0,21030000,41000000,102000000,23000000,0,0,0,0,0,0,0)
>>>>   SphereCode=12
>>>>   GridOrigin=HDFE_GD_UL
>>>>   GROUP=Dimension
>>>>   END_GROUP=Dimension
>>>>
>>>> The name suggests a 1KM grid, and as such, by its resolution, it should
>>>> span 1200KM. Indeed, from the corner points:
>>>>
>>>> In X:  (-3450000 - -2250000) = a span of 1200000meters; divided by
>>>> xres=1200, yields 1000meter grid cells
>>>> In Y:  (1600000 - 400000) = 1200000meters; div by yres=1200 yields
>>>> 1000meter grid cells
>>>>
>>>> So everything is consistent so far. The GCTP_ALBERS suggest the grid was
>>>> constructed based upon an ALBERS projection, using the GCTP library. The
>>>> ProjParams give further details:
>>>>
>>>>   ProjParams=(0,0,21030000,41000000,102000000,23000000,0,0,0,0,0,0,0)
>>>>
>>>> Again, without documentation, this is speculation, but looking at
>>>> pg13/appendexD in:
>>>>
>>>>
>>>> https://www.ngs.noaa.gov/PUBS_LIB/GeneralCartographicTransformationPackage_v2_TR_NOS124_CGS9.pdf
>>>>
>>>> for the Albers projection, the first 2 values appear to be semimajor
>>>> axis of ellipsoid, and eccentricity. Both are zero, implying defaults of
>>>> Clarke's 1866 ellipsoid and spherical earth (which seems to be an oymoron?
>>>> I'm confused about that)
>>>>
>>>> The next 6 values might be:
>>>>
>>>>   lat of 1st standard parallel
>>>>   lat of 2nd standard parallel
>>>>   lon of central meridian
>>>>   lat of projection's origin
>>>>   false easting (zero in this case)
>>>>   false northing (zero)
>>>>
>>>> the remaining zeros don't seem to apply.
>>>>
>>>> NCL does not have an public interface to GCTP, but there is an
>>>> undocumented interface to the well-known proj4 library. The trick here is to
>>>> use it to convert from meters-on-the ground units into lat/lon.  The first
>>>> step is to construct arrays representing the grid's position in meters. In
>>>> the X direction, if we did
>>>>
>>>>   x = fspan(-3450000., -2250000, 1200)
>>>>
>>>> we get an array of 1201, which is wrong. I speculate that for a grid of
>>>> 1200, those values represent the total *spatial extent* of the grid, but
>>>> that the data are based upon cell centers, not corners. Thus something like:
>>>>
>>>>   x = fspan(-3450000.+500., -2250000.-500., 1200)
>>>>   y = fspan(1600000.-500., 400000.+500., 1200)
>>>>
>>>> A 1km grid cannot obviously be constant spacing in longitude, so
>>>> ultimately, your coordinate arrays are going to be curvilinear:
>>>>
>>>>   x := conform_dims((/1200, 1200/), x, 1)
>>>>   y := conform_dims((/1200, 1200/), y, 0)
>>>>
>>>> NOTE: THIS ASSUMES THE GRID IS ROW MAJOR, WEST-->EAST, NORTH-->SOUTH
>>>>
>>>> The undocumented NCL function "transform_coordinates" takes a proj4
>>>> source-porjection string, dest-proj string, x, y, z 1D arrays of type
>>>> double, and returns the results in the x,y,z arrays. I won't go into the
>>>> details of the proj-strings. We want something like:
>>>>
>>>> src = "+proj=aea +lat_0=23.0 +lat_1=21d03m +lat_2=41 +lon_0=102
>>>> +ellps=clrk66"
>>>> dst = "+proj=latlon +ellps=sphere"
>>>> x := flt2dble(ndtooned(x))
>>>> y := flt2dble(ndtooned(y))
>>>> z = x   ; A quick-n-dirty way to get an empty Z array of same
>>>> dimensions/type
>>>> z = 0.  ;
>>>> transform_coordinate(src, dst, x, y, z)
>>>>
>>>> ; convert back to curvilinear coord arrays
>>>> lon = onedtond(x, (/1200, 1200/))
>>>> lat = onedtond(y, (/1200, 1200/))
>>>>
>>>>
>>>> From here, you have to associate the lat/lon coordinate arrays with the
>>>> variables you want to plot, as Adam and other previously described.
>>>>
>>>> Attached is a script and example plot of the resultant grid. Please let
>>>> the group know if this appears to be the correct area-of-interest.
>>>>
>>>> Rick
>>>>
>>>>
>>>>
>>>> On Fri, Sep 29, 2017 at 11:45 AM, Rick Brownrigg <brownrig at ucar.edu>
>>>> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> I do not know for certain without examining the file, but it looks like
>>>>> those values are map-projection parameters, from which curvilinear grid was
>>>>> generated as equal-area grid cells in lat/lon spac.
>>>>>
>>>>> Rick
>>>>>
>>>>> On Fri, Sep 29, 2017 at 10:16 AM, Kunal Bali <kunal.bali9 at gmail.com>
>>>>> wrote:
>>>>>>
>>>>>> Thanks for all the suggestions and help Adam Sir. Now the data is
>>>>>> showing over the Indian region.
>>>>>> but one thing I need to confirm here.
>>>>>>
>>>>>> Some values in the form of UpperLeftPointMtrs and LowerRightMtrs are
>>>>>> given in the file ((in the original hdf file) ) description along with X
>>>>>> YDim.
>>>>>>
>>>>>> So, does these value interfer while creating the lat lon dimensions
>>>>>> during conversion netcdf from hdf?
>>>>>>
>>>>>> Sould these values be consider or we can ignore these values?
>>>>>>
>>>>>>
>>>>>> group: latlon {
>>>>>>     variables:
>>>>>>       short _HDFEOS_CRS;
>>>>>>         :Projection = "GCTP_ALBERS";
>>>>>>         :UpperLeftPointMtrs = -3450000.0, 1600000.0; // double
>>>>>>         :LowerRightMtrs = -2250000.0, 400000.0; // double
>>>>>>         :ProjParams = 0.0, 0.0, 2.103E7, 4.1E7, 1.02E8, 2.3E7, 0.0,
>>>>>> 0.0, 0.0, 0.0, 0.0, 0.0, 0.0; // double
>>>>>>         :SphereCode = "12";
>>>>>>
>>>>>>     group: Data_Fields {
>>>>>>       dimensions:
>>>>>>         YDim = 1200;
>>>>>>         XDim = 1200;
>>>>>>       variables:
>>>>>>         float lat(YDim=1200, XDim=1200);
>>>>>>
>>>>>>         float lon(YDim=1200, XDim=1200);
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Regards
>>>>>> Kunal Bali
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Thu, Sep 28, 2017 at 9:27 PM, Adam Phillips <asphilli at ucar.edu>
>>>>>> wrote:
>>>>>>>
>>>>>>> Hi Kunal,
>>>>>>> As the documentation states, latGlobeFo (lonGlobeFo) generates
>>>>>>> latitudes (longitudes) and associated metadata for a global fixed offset
>>>>>>> grid.
>>>>>>>
>>>>>>> https://www.ncl.ucar.edu/Document/Functions/Contributed/latGlobeFo.shtml
>>>>>>>
>>>>>>> https://www.ncl.ucar.edu/Document/Functions/Contributed/lonGlobeFo.shtml
>>>>>>> If you need to create coordinates for a regional grid, then you will
>>>>>>> have to do it by hand. For example, if you know your data are equally spaced
>>>>>>> in the both the latitude and longitude direction from 0:40N, 60:100E (for
>>>>>>> example), you can set up your coordinates like this:
>>>>>>>
>>>>>>> lat = fspan(0,40,1200)
>>>>>>> lon = fspan(60,100,1200)
>>>>>>> print(lat)   ; check that these are the correct coordinates
>>>>>>> print(lon)   ; check that these are the correct coordinates
>>>>>>> lat at units = "degrees_north"
>>>>>>> lat!0 = "lat"
>>>>>>> lat&lat = lat
>>>>>>> lon at units = "degrees_east"
>>>>>>> lon!0 = "lon"
>>>>>>> lon&lon = lon
>>>>>>> var!0 = "lat"    ; you can name these dimensions whatever you want..
>>>>>>> var!1 = "lon"
>>>>>>> var&lat = lat     ; but make sure you refer to the correct named
>>>>>>> dimensions
>>>>>>> var&lon = lon
>>>>>>>
>>>>>>> The above is similar to what latGlobeFo/lonGlobeFo do for global
>>>>>>> grids. Hope that helps. If you have further questions please respond to
>>>>>>> ncl-talk.
>>>>>>> Adam
>>>>>>>
>>>>>>> On Tue, Sep 26, 2017 at 10:26 AM, Kunal Bali <kunal.bali9 at gmail.com>
>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Thanks for all the suggestions Dennis sir.
>>>>>>>> But now I have come to know that the dimensions
>>>>>>>>
>>>>>>>> nlat=1200
>>>>>>>> nlon=1200
>>>>>>>>
>>>>>>>> are belongs to only of Indian region.
>>>>>>>>
>>>>>>>> And the code I am using below is not displaying the data over Indian
>>>>>>>> region.
>>>>>>>>
>>>>>>>>  lat = latGlobeFo(nlat, "lat", "latitude", "degrees_north")
>>>>>>>>  lon = lonGlobeFo(nlon, "lon", "longitude", "degrees_east")
>>>>>>>> lat = lat(::-1)
>>>>>>>> lon = (/ lon - 180. /)  ; subtract 180 from all values
>>>>>>>> lon&lon = lon
>>>>>>>>
>>>>>>>> So please help me regarding this issue.
>>>>>>>>
>>>>>>>> regards
>>>>>>>> Kunal Bali
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Sep 19, 2017 at 10:36 PM, Dennis Shea <shea at ucar.edu> wrote:
>>>>>>>>>
>>>>>>>>> Ditto what Marston posted.
>>>>>>>>>
>>>>>>>>> ===
>>>>>>>>> Please look at NCL's FAQ.
>>>>>>>>>
>>>>>>>>> [1] Click "Support" at top of page
>>>>>>>>> [2] Click FAQ
>>>>>>>>>
>>>>>>>>> I think it would be instructive to look at all of the topics.
>>>>>>>>>
>>>>>>>>> For example:  Error messages and other issues
>>>>>>>>>
>>>>>>>>> Look at #7
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Sep 19, 2017 at 3:03 AM, Marston Johnston
>>>>>>>>> <shejo284 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> It tells you in the warning message, exactly what to do to remove
>>>>>>>>>> the warning.
>>>>>>>>>>
>>>>>>>>>> If you want to improve you coding skills, it would better to
>>>>>>>>>> understand why the warning is occurring in the first place: dimension 0 and
>>>>>>>>>> 1 of the variable you are passing has no names or the names do not match the
>>>>>>>>>> variable on the lhs.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> /M
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>>>>>
>>>>>>>>>> Marston S. Ward, PhD
>>>>>>>>>>
>>>>>>>>>> Department of Earth Sciences
>>>>>>>>>>
>>>>>>>>>> University of Gothenburg, Sweden
>>>>>>>>>>
>>>>>>>>>> Email: marston.johnston at gu.se
>>>>>>>>>>
>>>>>>>>>> SkypeID: marston.johnston
>>>>>>>>>>
>>>>>>>>>> Phone: +46-31-7864901
>>>>>>>>>>
>>>>>>>>>> Only the fruitful thing is true!
>>>>>>>>>>
>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> From: ncl-talk <ncl-talk-bounces at ucar.edu> on behalf of Kunal Bali
>>>>>>>>>> <kunal.bali9 at gmail.com>
>>>>>>>>>> Date: Tuesday, 19 September 2017 at 10:50
>>>>>>>>>> Cc: "ncl-talk at ucar.edu" <ncl-talk at ucar.edu>
>>>>>>>>>> Subject: Re: [ncl-talk] set_dimension_query
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Thank you for providing this information.
>>>>>>>>>>
>>>>>>>>>> It's working. The script given below is now able to convert
>>>>>>>>>> multiple files into .netcdf with the desired file name.
>>>>>>>>>> However, on the same time, it also shows some warnings. But noted
>>>>>>>>>> that, I am successfully creating the multiple files into the netcdf. I just
>>>>>>>>>> need to know that how can I remove these warnings?
>>>>>>>>>>
>>>>>>>>>> warning:VarVarWrite: Dimension names for dimension number (0)
>>>>>>>>>> don't match, assigning name of rhs dimension to lhs and overwriting
>>>>>>>>>> coordinate variable, use "(/../)" if this change is not desired
>>>>>>>>>> warning:VarVarWrite: Dimension names for dimension number (1)
>>>>>>>>>> don't match, assigning name of rhs dimension to lhs and overwriting
>>>>>>>>>> coordinate variable, use "(/../)" if this change is not desired
>>>>>>>>>> warning:["Execute.c":8640]:Execute: Error occurred at or near line
>>>>>>>>>> 22 in file netcdf2.ncl
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ;----------------------------------------------------------------------
>>>>>>>>>>
>>>>>>>>>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"
>>>>>>>>>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"
>>>>>>>>>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/contributed.ncl"
>>>>>>>>>>
>>>>>>>>>> begin
>>>>>>>>>> ;---Read data
>>>>>>>>>>
>>>>>>>>>>         diri = "/Users/Pushp/Desktop/test/"   ; input directory
>>>>>>>>>>         fili  = systemfunc("cd "+diri+" ; ls
>>>>>>>>>> MAIACTAOT.h00v02*hdf")
>>>>>>>>>>         nfili = dimsizes(fili)
>>>>>>>>>>         print("nfili="+nfili)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>         dirnc = "/Users/Pushp/Desktop/test/"   ; output (netCDF)
>>>>>>>>>> directory
>>>>>>>>>>
>>>>>>>>>>         do nf=0,nfili-1
>>>>>>>>>>         pthi = diri+fili(nf)
>>>>>>>>>>         f    = addfile(pthi,"r")
>>>>>>>>>>
>>>>>>>>>>         var  = short2flt(f->Optical_Depth_055(:,:))
>>>>>>>>>>
>>>>>>>>>>         nlat = 1200
>>>>>>>>>>         nlon = 1200
>>>>>>>>>>         lat  = latGlobeFo(nlat, "lat", "latitude",
>>>>>>>>>> "degrees_north")
>>>>>>>>>>         lon  = lonGlobeFo(nlon, "lon", "longitude",
>>>>>>>>>> "degrees_east")
>>>>>>>>>>     ;    lat  = lat(::-1)
>>>>>>>>>>         lon  = (/ lon - 180. /)  ; subtract 180 from all values
>>>>>>>>>>         lon&lon = lon           ; update coordinates
>>>>>>>>>>
>>>>>>>>>>         var!0 = "lat"    ; you can name these dimensions whatever
>>>>>>>>>> you want..
>>>>>>>>>>         var!1 = "lon"
>>>>>>>>>>         var&lat = lat     ; but make sure you refer to the correct
>>>>>>>>>> named dimensions
>>>>>>>>>>         var&lon = lon
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>      filroot = str_get_cols(fili(nf), 0, 27)  ; eg:
>>>>>>>>>> "MAIACTAOT.h00v02.20000570505"
>>>>>>>>>>      filnc    = filroot+".nc"
>>>>>>>>>>      pthnc  = dirnc + filnc
>>>>>>>>>>
>>>>>>>>>>      system("/bin/rm -f "+pthnc)
>>>>>>>>>>      ncdf = addfile(pthnc,"c")  ; open new netCDF file
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>      end do    ; end 'nf' loop
>>>>>>>>>>
>>>>>>>>>>    ;     system("/bin/rm -f simple2.nc")
>>>>>>>>>>    ;     ncdf = addfile("simple2.nc" ,"c")  ; open output netCDF
>>>>>>>>>> file
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ;===================================================================
>>>>>>>>>>     ; create global attributes of the file (optional)
>>>>>>>>>>
>>>>>>>>>> ;===================================================================
>>>>>>>>>>        fAtt               = True            ; assign file
>>>>>>>>>> attributes
>>>>>>>>>>        fAtt at title         = "NCL Simple Approach to netCDF
>>>>>>>>>> Creation"
>>>>>>>>>>        fAtt at source_file   =  "original-file.nc"
>>>>>>>>>>        fAtt at Conventions   = "None"
>>>>>>>>>>        fAtt at creation_date = systemfunc ("date")
>>>>>>>>>>        fileattdef( ncdf, fAtt )            ; copy file attributes
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ;===================================================================
>>>>>>>>>>     ; make time an UNLIMITED dimension; recommended  for most
>>>>>>>>>> applications
>>>>>>>>>>
>>>>>>>>>> ;===================================================================
>>>>>>>>>>        filedimdef(ncdf,"time",-1,True)
>>>>>>>>>>
>>>>>>>>>> ;       ncdf->var&lat = lat
>>>>>>>>>> ;       ncdf->var&lon = lon
>>>>>>>>>>        ncdf->var = var
>>>>>>>>>>
>>>>>>>>>> end
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Kunal Bali
>>>>>>>>>>
>>>>>>>>>> Research Scholar
>>>>>>>>>>
>>>>>>>>>> Radio & Atmospheric Science Division
>>>>>>>>>>
>>>>>>>>>> CSIR - National Physical Laboratory
>>>>>>>>>>
>>>>>>>>>> New Delhi - 110012
>>>>>>>>>>
>>>>>>>>>> India
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Mon, Sep 18, 2017 at 9:04 PM, Dennis Shea <shea at ucar.edu>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Loop over the files ...
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>  diri = "/media/Local Disk/NPL/MODIS_FPC/"   ; input directory
>>>>>>>>>>
>>>>>>>>>>  fili  = systemfunc("cd "+diri +; ls MAIACTAOT.h00v02*hdf")
>>>>>>>>>>
>>>>>>>>>>  nfili = dimsizes(fili)
>>>>>>>>>>
>>>>>>>>>>  print("nfili="+nfili)
>>>>>>>>>>
>>>>>>>>>>  dirnc = "/media/Local Disk/NPL/MODIS_FPC/"   ; output (netCDF)
>>>>>>>>>> directory
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>  do nf=0,nfili-1
>>>>>>>>>>
>>>>>>>>>>       pthi = diri+fili(nf)
>>>>>>>>>>
>>>>>>>>>>       f      = addfile(pthi,"r")
>>>>>>>>>>
>>>>>>>>>>       ....
>>>>>>>>>>
>>>>>>>>>>      filroot = str_get_cols(fili(nf), 0, 27)  ; eg:
>>>>>>>>>> "MAIACTAOT.h00v02.20000570505"
>>>>>>>>>>
>>>>>>>>>>      filnc    = filroot+".nc"
>>>>>>>>>>
>>>>>>>>>>      pthnc  = dirnc + filnc
>>>>>>>>>>
>>>>>>>>>>      system("/bin/rm -f "+pthnc)
>>>>>>>>>>      ncdf = addfile(pthnc,"c")  ; open new netCDF file
>>>>>>>>>>
>>>>>>>>>>      ....
>>>>>>>>>>
>>>>>>>>>> end do    ; end 'nf' loop
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> =====
>>>>>>>>>>
>>>>>>>>>> If there is something you do not understand use some print
>>>>>>>>>> statements.
>>>>>>>>>>
>>>>>>>>>> Become familiar with the 'string' category. Look at all the
>>>>>>>>>> functions.
>>>>>>>>>>
>>>>>>>>>>    https://www.ncl.ucar.edu/Document/Functions/string.shtml
>>>>>>>>>>
>>>>>>>>>> Please read the documentation for the function used above
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> https://www.ncl.ucar.edu/Document/Functions/Built-in/str_get_cols.shtml
>>>>>>>>>>
>>>>>>>>>> Good Luck
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Mon, Sep 18, 2017 at 6:11 AM, Kunal Bali
>>>>>>>>>> <kunal.bali9 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Thnks for the reply.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> that will change the name of only one file. isn't it. but what
>>>>>>>>>> about the other files
>>>>>>>>>>
>>>>>>>>>> I have 365 files in one directory and I need to change all the
>>>>>>>>>> file name one by one.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Kunal Bali
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Mon, Sep 18, 2017 at 5:14 PM, Dennis Shea <shea at ucar.edu>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Really?
>>>>>>>>>>
>>>>>>>>>> Change:
>>>>>>>>>>       system("/bin/rm -f simple.nc")
>>>>>>>>>>       ncdf = addfile("simple.nc" ,"c")
>>>>>>>>>>
>>>>>>>>>> To:
>>>>>>>>>>       system("/bin/rm -f MAIACTAOT.h00v02.20000570505.nc")
>>>>>>>>>>       ncdf = addfile("MAIACTAOT.h00v02.20000570505.nc" ,"c")
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Mon, Sep 18, 2017 at 12:37 AM, Kunal Bali
>>>>>>>>>> <kunal.bali9 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Thanks, it worked.
>>>>>>>>>>
>>>>>>>>>> one more question is that.
>>>>>>>>>>
>>>>>>>>>> I used the code (given below). So it gives simple.nc name as an
>>>>>>>>>> output file.
>>>>>>>>>>
>>>>>>>>>> ncdf = addfile("simple.nc" ,"c")
>>>>>>>>>>
>>>>>>>>>> If I want to keep the original file name with the output file name
>>>>>>>>>> then what should I do?
>>>>>>>>>>
>>>>>>>>>> I mean the original file name is MAIACTAOT.h00v02.20003660700.hdf
>>>>>>>>>>
>>>>>>>>>> Now I want to create my netcdf file name  as
>>>>>>>>>> MAIACTAOT.h00v02.20003660700.nc NOT simple.nc.
>>>>>>>>>>
>>>>>>>>>> I can not simply write simple.nc file name because I have many
>>>>>>>>>> files.
>>>>>>>>>>
>>>>>>>>>> e.g I have one directory having 365 .hdf file. So I need to
>>>>>>>>>> convert all the hdf file to netcdf file at once with the same name of
>>>>>>>>>> original file names.
>>>>>>>>>>
>>>>>>>>>> I hope you have got my query.
>>>>>>>>>>
>>>>>>>>>> please let me know that too.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Thank You
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Kunal Bali
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Thu, Sep 14, 2017 at 9:09 PM, Adam Phillips <asphilli at ucar.edu>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Hi Kunal,
>>>>>>>>>>
>>>>>>>>>> It looks to me like your latitudes are flipped. You are setting up
>>>>>>>>>> and assigning your coordinate lat/lon variables in this coding:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> nlat = 1200
>>>>>>>>>> nlon = 1200
>>>>>>>>>> lat = latGlobeFo(nlat, "lat", "latitude", "degrees_north")
>>>>>>>>>>
>>>>>>>>>> lon = lonGlobeFo(nlon, "lon", "longitude", "degrees_east")
>>>>>>>>>> lat = lat(::-1)
>>>>>>>>>> lon = (/ lon - 180. /)  ; subtract 180 from all values
>>>>>>>>>>
>>>>>>>>>> lon&lon = lon           ; update coordinates
>>>>>>>>>>
>>>>>>>>>> var!0 = "lat"    ; you can name these dimensions whatever you
>>>>>>>>>> want..
>>>>>>>>>> var!1 = "lon"
>>>>>>>>>> var&lat = lat     ; but make sure you refer to the correct named
>>>>>>>>>> dimensions
>>>>>>>>>> var&lon = lon
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Assuming I'm right on your latitudes being the issue, one of the
>>>>>>>>>> following two modifications should work:
>>>>>>>>>>
>>>>>>>>>> Delete this line:
>>>>>>>>>>
>>>>>>>>>> lat = lat(::-1)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> If the above doesn't fix it, try this:
>>>>>>>>>>
>>>>>>>>>> Change this:
>>>>>>>>>>
>>>>>>>>>> lat = lat(::-1)
>>>>>>>>>>
>>>>>>>>>> to this:
>>>>>>>>>>
>>>>>>>>>> lat = lat(::-1)
>>>>>>>>>>
>>>>>>>>>> lat&lat = lat
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> If you continue to have issues please respond to ncl-talk.
>>>>>>>>>>
>>>>>>>>>> Adam
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Sep 13, 2017 at 12:35 PM, Kunal Bali
>>>>>>>>>> <kunal.bali9 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> For direct output as a netcdf format, I used the script given
>>>>>>>>>> below. It produced the netcdf file easily. But the netcdf file and original
>>>>>>>>>> hdf file both showing the different results. The data pattern is shifted. I
>>>>>>>>>> mean it may be related to the lat lon position. please see the attached
>>>>>>>>>> file, you will understand.  And please let me know which one is correct.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ;----------------------------------------------------------------------
>>>>>>>>>>
>>>>>>>>>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"
>>>>>>>>>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"
>>>>>>>>>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/contributed.ncl"
>>>>>>>>>>
>>>>>>>>>> begin
>>>>>>>>>> ;---Read data
>>>>>>>>>>         a = addfile("/media/Local
>>>>>>>>>> Disk/NPL/MODIS_FPC/MAIACTAOT.h00v02.20000570505.hdf","r")
>>>>>>>>>>         var  = short2flt(a->Optical_Depth_055(:,:))
>>>>>>>>>>             ;          short2flt(a[:]->noxfire)
>>>>>>>>>>         nlat = 1200
>>>>>>>>>>         nlon = 1200
>>>>>>>>>>         lat = latGlobeFo(nlat, "lat", "latitude", "degrees_north")
>>>>>>>>>>         lon = lonGlobeFo(nlon, "lon", "longitude", "degrees_east")
>>>>>>>>>>         lat = lat(::-1)
>>>>>>>>>>         lon = (/ lon - 180. /)  ; subtract 180 from all values
>>>>>>>>>>         lon&lon = lon           ; update coordinates
>>>>>>>>>>
>>>>>>>>>>         var!0 = "lat"    ; you can name these dimensions whatever
>>>>>>>>>> you want..
>>>>>>>>>>         var!1 = "lon"
>>>>>>>>>>         var&lat = lat     ; but make sure you refer to the correct
>>>>>>>>>> named dimensions
>>>>>>>>>>         var&lon = lon
>>>>>>>>>>
>>>>>>>>>>                  system("/bin/rm -f simple.nc")
>>>>>>>>>>              ncdf = addfile("simple.nc" ,"c")  ; open output
>>>>>>>>>> netCDF file
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ;===================================================================
>>>>>>>>>>     ; create global attributes of the file (optional)
>>>>>>>>>>
>>>>>>>>>> ;===================================================================
>>>>>>>>>>        fAtt               = True            ; assign file
>>>>>>>>>> attributes
>>>>>>>>>>        fAtt at title         = "NCL Simple Approach to netCDF
>>>>>>>>>> Creation"
>>>>>>>>>>        fAtt at source_file   =  "original-file.nc"
>>>>>>>>>>        fAtt at Conventions   = "None"
>>>>>>>>>>        fAtt at creation_date = systemfunc ("date")
>>>>>>>>>>        fileattdef( ncdf, fAtt )            ; copy file attributes
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ;===================================================================
>>>>>>>>>>     ; make time an UNLIMITED dimension; recommended  for most
>>>>>>>>>> applications
>>>>>>>>>>
>>>>>>>>>> ;===================================================================
>>>>>>>>>>        filedimdef(ncdf,"time",-1,True)
>>>>>>>>>>        ncdf->var = var
>>>>>>>>>>
>>>>>>>>>> end
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Kunal Bali
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Sep 13, 2017 at 11:27 PM, Kunal Bali
>>>>>>>>>> <kunal.bali9 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> No problem, I sorted out.
>>>>>>>>>>
>>>>>>>>>> Just changed short to float.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Kunal Bali
>>>>>>>>>>
>>>>>>>>>> Research Scholar
>>>>>>>>>>
>>>>>>>>>> Radio & Atmospheric Science Division
>>>>>>>>>>
>>>>>>>>>> CSIR - National Physical Laboratory
>>>>>>>>>>
>>>>>>>>>> New Delhi - 110012
>>>>>>>>>>
>>>>>>>>>> India
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Sep 13, 2017 at 11:24 PM, Kunal Bali
>>>>>>>>>> <kunal.bali9 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Thanks for providing this information.
>>>>>>>>>>
>>>>>>>>>> Also, I would like to mention that when I plot this data. The
>>>>>>>>>> values are not in the domain. I mean the real values lie in-between 0 to 1
>>>>>>>>>> but here it is reaching to 400.
>>>>>>>>>>
>>>>>>>>>> So, how to correct the values?
>>>>>>>>>>
>>>>>>>>>> Description of the variable is
>>>>>>>>>>
>>>>>>>>>> short Optical_Depth_055(YDim=1200, XDim=1200);
>>>>>>>>>>   :long_name = "AOT at 0.55 micron";
>>>>>>>>>>   :scale_factor = 0.001; // double
>>>>>>>>>>   :add_offset = 0.0; // double
>>>>>>>>>>   :unit = "None";
>>>>>>>>>>   :_FillValue = -28672S; // short
>>>>>>>>>>   :valid_range = -100S, 5000S; // short
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Kunal Bali
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Sep 13, 2017 at 10:28 PM, Adam Phillips
>>>>>>>>>> <asphilli at ucar.edu> wrote:
>>>>>>>>>>
>>>>>>>>>> Hi Kunal,
>>>>>>>>>>
>>>>>>>>>> Yes, clicking on the output netCDF link from the Applications
>>>>>>>>>> page:
>>>>>>>>>>
>>>>>>>>>> http://www.ncl.ucar.edu/Applications/o-netcdf.shtml
>>>>>>>>>>
>>>>>>>>>> I would recommend following the inefficient method #1. Unless you
>>>>>>>>>> are writing a file with many large variables, the inefficient method works
>>>>>>>>>> just fine.
>>>>>>>>>>
>>>>>>>>>> http://www.ncl.ucar.edu/Applications/method_1.shtml
>>>>>>>>>>
>>>>>>>>>> Good luck,
>>>>>>>>>>
>>>>>>>>>> Adam
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Sep 13, 2017 at 10:25 AM, Kunal Bali
>>>>>>>>>> <kunal.bali9 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Thank you so much, it worked
>>>>>>>>>>
>>>>>>>>>> I want to know one more thing.
>>>>>>>>>> After rearranging the dimensions can we now convert (or write)
>>>>>>>>>> this arranged file into netcdf format?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Kunal Bali
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Sep 13, 2017 at 8:55 PM, Adam Phillips <asphilli at ucar.edu>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Hi Kunal,
>>>>>>>>>>
>>>>>>>>>> I think you just need to rearrange the order of your lines and
>>>>>>>>>> tweak a couple of lines. As the error message states, lat is not defined in
>>>>>>>>>> your 3rd line and you are referring to it as if it is.Try this:
>>>>>>>>>>
>>>>>>>>>> a = addfile("/media/Local
>>>>>>>>>> Disk/NPL/MODIS_FPC/MAIACTAOT.h00v02.20000570505.hdf","r")
>>>>>>>>>> var  = a->Optical_Depth_055(:,:)
>>>>>>>>>> nlat = 1200
>>>>>>>>>> nlon = 1200
>>>>>>>>>> lat = latGlobeFo(nlat, "lat", "latitude", "degrees_north")
>>>>>>>>>>
>>>>>>>>>> lon = lonGlobeFo(nlon, "lon", "longitude", "degrees_east")
>>>>>>>>>> lat = lat(::-1)
>>>>>>>>>> lon = (/ lon - 180. /)  ; subtract 180 from all values
>>>>>>>>>> lon&lon = lon           ; update coordinates
>>>>>>>>>>
>>>>>>>>>> var!0 = "lat"    ; you can name these dimensions whatever you
>>>>>>>>>> want..
>>>>>>>>>> var!1 = "lon"
>>>>>>>>>>
>>>>>>>>>> var&lat = lat     ; but make sure you refer to the correct named
>>>>>>>>>> dimensions
>>>>>>>>>>
>>>>>>>>>> var&lat = lon
>>>>>>>>>>
>>>>>>>>>> ;var&XDim_grid1km = lat
>>>>>>>>>> ;var&YDim_grid1km = lon
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> If you have any further questions please respond to the ncl-talk
>>>>>>>>>> email list.
>>>>>>>>>>
>>>>>>>>>> Adam
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Sep 13, 2017 at 8:38 AM, Kunal Bali
>>>>>>>>>> <kunal.bali9 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Dear NCL
>>>>>>>>>>
>>>>>>>>>> I have a file with the variable summary. The dimensions are in 2D.
>>>>>>>>>>
>>>>>>>>>> ncl 2>  printVarSummary(var)
>>>>>>>>>>
>>>>>>>>>> Variable: var
>>>>>>>>>> Type: short
>>>>>>>>>> Total Size: 2880000 bytes
>>>>>>>>>>             1440000 values
>>>>>>>>>> Number of Dimensions: 2
>>>>>>>>>> Dimensions and sizes:    [YDim_grid1km | 1200] x [XDim_grid1km |
>>>>>>>>>> 1200]
>>>>>>>>>> Coordinates:
>>>>>>>>>> Number Of Attributes: 7
>>>>>>>>>>   long_name :    AOT at 0.55 micron
>>>>>>>>>>   scale_factor :    0.001
>>>>>>>>>>   add_offset :       0
>>>>>>>>>>   unit :    None
>>>>>>>>>>   _FillValue :    -28672
>>>>>>>>>>   valid_range :    ( -100, 5000 )
>>>>>>>>>>   hdf_name :    Optical_Depth_055
>>>>>>>>>>
>>>>>>>>>> I am trying to read the dimensions of this file as
>>>>>>>>>>
>>>>>>>>>> begin
>>>>>>>>>> ;---Read data
>>>>>>>>>>          a = addfile("/media/Local
>>>>>>>>>> Disk/NPL/MODIS_FPC/MAIACTAOT.h00v02.20000570505.hdf","r")
>>>>>>>>>>
>>>>>>>>>>             var  = a->Optical_Depth_055(:,:)
>>>>>>>>>>
>>>>>>>>>>          var&XDim_grid1km = lat
>>>>>>>>>>          var&YDim_grid1km = lon
>>>>>>>>>>
>>>>>>>>>>         nlat = 1200
>>>>>>>>>>          nlon = 1200
>>>>>>>>>>             lat = latGlobeFo(nlat, "lat", "latitude",
>>>>>>>>>> "degrees_north")
>>>>>>>>>>         lon = lonGlobeFo(nlon, "lon", "longitude", "degrees_east")
>>>>>>>>>>             lat = lat(::-1)
>>>>>>>>>>             lon = (/ lon - 180. /)  ; subtract 180 from all values
>>>>>>>>>>             lon&lon = lon           ; update coordinates
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>         var!0 = "lat"
>>>>>>>>>>         var!1 = "lon"
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> But the error appeared as
>>>>>>>>>> fatal:Variable (lat) is undefined
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> So, could anyone please let me know that how to read dimension of
>>>>>>>>>> this file.
>>>>>>>>>>
>>>>>>>>>> Thank You
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Regards
>>>>>>>>>>
>>>>>>>>>> Kunal Bali
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> ncl-talk mailing list
>>>>>>>>>> ncl-talk at ucar.edu
>>>>>>>>>> List instructions, subscriber options, unsubscribe:
>>>>>>>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>>
>>>>>>>>>> Adam Phillips
>>>>>>>>>>
>>>>>>>>>> Associate Scientist,  Climate and Global Dynamics Laboratory, NCAR
>>>>>>>>>>
>>>>>>>>>> www.cgd.ucar.edu/staff/asphilli/   303-497-1726
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> ncl-talk mailing list
>>>>>>>>>> ncl-talk at ucar.edu
>>>>>>>>>> List instructions, subscriber options, unsubscribe:
>>>>>>>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>>
>>>>>>>>>> Adam Phillips
>>>>>>>>>>
>>>>>>>>>> Associate Scientist,  Climate and Global Dynamics Laboratory, NCAR
>>>>>>>>>>
>>>>>>>>>> www.cgd.ucar.edu/staff/asphilli/   303-497-1726
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> ncl-talk mailing list
>>>>>>>>>> ncl-talk at ucar.edu
>>>>>>>>>> List instructions, subscriber options, unsubscribe:
>>>>>>>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>>
>>>>>>>>>> Adam Phillips
>>>>>>>>>>
>>>>>>>>>> Associate Scientist,  Climate and Global Dynamics Laboratory, NCAR
>>>>>>>>>>
>>>>>>>>>> www.cgd.ucar.edu/staff/asphilli/   303-497-1726
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> ncl-talk mailing list
>>>>>>>>>> ncl-talk at ucar.edu
>>>>>>>>>> List instructions, subscriber options, unsubscribe:
>>>>>>>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> ncl-talk mailing list
>>>>>>>>>> ncl-talk at ucar.edu
>>>>>>>>>> List instructions, subscriber options, unsubscribe:
>>>>>>>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________ ncl-talk mailing
>>>>>>>>>> list ncl-talk at ucar.edu List instructions, subscriber options, unsubscribe:
>>>>>>>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> ncl-talk mailing list
>>>>>>>>>> ncl-talk at ucar.edu
>>>>>>>>>> List instructions, subscriber options, unsubscribe:
>>>>>>>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> ncl-talk mailing list
>>>>>>>> ncl-talk at ucar.edu
>>>>>>>> List instructions, subscriber options, unsubscribe:
>>>>>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Adam Phillips
>>>>>>> Associate Scientist,  Climate and Global Dynamics Laboratory, NCAR
>>>>>>> www.cgd.ucar.edu/staff/asphilli/   303-497-1726
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> ncl-talk mailing list
>>>>>> ncl-talk at ucar.edu
>>>>>> List instructions, subscriber options, unsubscribe:
>>>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>>>>
>>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> ncl-talk mailing list
>>> ncl-talk at ucar.edu
>>> List instructions, subscriber options, unsubscribe:
>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>
>>
>
>
> _______________________________________________
> ncl-talk mailing list
> ncl-talk at ucar.edu
> List instructions, subscriber options, unsubscribe:
> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>


More information about the ncl-talk mailing list