[ncl-talk] Coordinate syronising error
Rashed Mahmood
rashidcomsis at gmail.com
Thu Jun 3 15:10:55 MDT 2021
As the documentation for lonFlip says "The rightmost dimension must be the
longitude dimension...". So now you can use lonFlip for the reordered
variable "cocol_retr_reorder":
lonFlip(cocol_retr_reorder)
Since your original variable "cocol_retr" and the reordered variable
"cocol_retr_reorder" have latitudes that are already south to north *(note:
- to +) *according to the variable summary, so you do not need south to
north conversion. If this does not work then please share the latest
(minimum script) and if possible a data file that you are reading.
On Thu, Jun 3, 2021 at 10:27 PM Najib Yusuf <najibgal at yahoo.com> wrote:
> Hello Dennis,
>
> Thank you. I have effected the corrections, I think the interchanged was
> as a result of "lonFlip" when I undo the "lonFlip" function and use the
> "reorder" and reorder S to N" functions/command you have suggested, the Lat
> and Lon became okay like this;
>
> Variable: cocol_retr
> Type: float
> Total Size: 3110400 bytes
> 777600 values
> Number of Dimensions: 3
> Dimensions and sizes: [ncl_join | 12] x [XDim_MOP03 | 360] x [YDim_MOP03
> | 180]
> Coordinates:
> XDim_MOP03: [-179.5..179.5]
> YDim_MOP03: [-89.5..89.5]
> Number Of Attributes: 4
> long_name : Retrieved CO Total Column Day
> units : mol/cm^2
> _FillValue : -9999
> projection : Geographic
>
> Variable: cocol_retr_reorder
> Type: float
> Total Size: 3110400 bytes
> 777600 values
> Number of Dimensions: 3
> Dimensions and sizes: [time | 12] x [YDim_MOP03 | 180] x [XDim_MOP03 |
> 360]
> Coordinates:
> YDim_MOP03: [-89.5..89.5]
> XDim_MOP03: [-179.5..179.5]
> Number Of Attributes: 4
> projection : Geographic
> _FillValue : -9999
> units : mol/cm^2
> long_name : Retrieved CO Total Column Day
>
> Variable: cocol_retr_SN
> Type: float
> Total Size: 3110400 bytes
> 777600 values
> Number of Dimensions: 3
> Dimensions and sizes: [time | 12] x [YDim_MOP03 | 180] x [XDim_MOP03 |
> 360]
> Coordinates:
> YDim_MOP03: [89.5..-89.5]
> XDim_MOP03: [-179.5..179.5]
> Number Of Attributes: 4
> long_name : Retrieved CO Total Column Day
> units : mol/cm^2
> _FillValue : -9999
> projection : Geographic
>
> but running gave similar error:
>
> fatal:NclOneDValGetClosestIndex: finish coordinate index out of range,
> can't continue
> fatal:Could not obtain coordinate indexes, unable to perform subscript
> fatal:["Execute.c":8637]:Execute: Error occurred at or near line 191 in
> file Annualaverage_MOPITTCO_nyg_modified.ncl
>
> Thank you
>
> Najib
>
> On Thursday, June 3, 2021, 04:31:56 AM GMT+1, Dennis Shea <shea at ucar.edu>
> wrote:
>
>
> Rashad is correct.
>
> Variable: cocol_retr_flip
> Dimensions and sizes: [ncl_join | 12] x [XDim_MOP03 | 360] x [YDim_MOP03
> | 180]
> Coordinates:
> XDim_MOP03: [-179.5..179.5] <=== these are longitudes
> YDim_MOP03: [ 0.5..359.5] <=== these are longitudes
> also
>
> Both coordinate variables have ranges for longitudes. These values are not
> suitable for latitudes.
>
> Further, you have:
>
> Variable: cocol_retr_flip
> Dimensions and sizes: [ncl_join | 12] x [XDim_MOP03 | 360] x [YDim_MOP03
> | 180]
>
> For comparison the model output, it should be [lat,lon]
> [ncl_join | 12] x [YDim_MOP03 | 180] x [XDim_MOP03 | 360]
>
> -----
>
>
> I have one [old] MOP03 file the latitudes range from:
>
> YDim_MOP03:: 89.5 ..-89.5 [North to south ordering]
>
> The variables do have ( XDim_MOP03, YDim_MOP03 ) ordering.
>
> This can be rectified by using NCL's named dimension reordering.
>
> After *addfiles*:
> cocol_retr_flip := cocol_retr_flip(:,YDim_MOP03|:,XDim_MOP03|:) ;
> reorder to (12,lat,lon)
> printVarSummary( cocol_retr_flip ) ; ***LOOK at this*** especially
> the ordering
> Now reorder from N->S to S->N
> cocol_retr_flip := cocol_retr_flip(:,::-1,:)
> printVarSummary( cocol_retr_flip ) ; ***LOOK at this*** especially
> the latitude coordinates
> =========
>
> I suggest that you only work on the one MOP03 variable to workk out the
> ordering.
>
>
>
>
>
>
> On Wed, Jun 2, 2021 at 10:03 AM Rashed Mahmood <rashidcomsis at gmail.com>
> wrote:
>
> But even if it is the case, then still the range in your: XDim_MOP03:
> [-179.5..179.5], does not make sense for a latitude range. latitude range
> should be within -90 to 90. You need to look into your data to make sure it
> is read correctly. Also a suggestion, please reduce your script for
> debugging and test it with one input file.
>
> On Wed, Jun 2, 2021 at 5:52 PM Najib Yusuf <najibgal at yahoo.com> wrote:
>
> No Rashed, could it be interchanged with longitude?
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Wed, 2 Jun 2021 at 16:32, Rashed Mahmood
> <rashidcomsis at gmail.com> wrote:
> The latitude range from the variable summary looks strange:
> Coordinates:
> XDim_MOP03: [-179.5..179.5]
> *YDim_MOP03: [ 0.5..359.5]*
> Do you know why latitudes are expanding from 0.5 to 359.5?
>
> On Wed, Jun 2, 2021 at 4:39 PM Najib Yusuf via ncl-talk <
> ncl-talk at mailman.ucar.edu> wrote:
>
> Dear Dennis,
>
> Thank you for this quick response. I have effected the suggestion, the
> printVarSummary is:
>
> Variable: co_model
> Type: float
> Total Size: 148635648 bytes
> 37158912 values
> Number of Dimensions: 4
> Dimensions and sizes: [time | 12] x [lev | 56] x [lat | 192] x [lon |
> 288]
> Coordinates:
> time: [ 31.. 365]
> lev: [1.867879997007549..992.5000106104562]
> lat: [ -90.. 90]
> lon: [ 0..358.75]
> Number Of Attributes: 4
> mdims : 1
> units : mol/mol
> long_name : CO concentration
> cell_methods : time: mean
>
> Variable: cocol_retr_flip
> Type: float
> Total Size: 3110400 bytes
> 777600 values
> Number of Dimensions: 3
> Dimensions and sizes: [ncl_join | 12] x [XDim_MOP03 | 360] x [YDim_MOP03
> | 180]
> Coordinates:
> XDim_MOP03: [-179.5..179.5]
> YDim_MOP03: [ 0.5..359.5]
> Number Of Attributes: 5
> long_name : Retrieved CO Total Column Day
> units : mol/cm^2
> _FillValue : -9999
> projection : Geographic
> lonFlip : longitude coordinate variable has been reordered via
> lonFlip
>
> However, when I run I get similar error:
> fatal:NclOneDValGetClosestIndex: finish coordinate index out of range,
> can't continue
> fatal:Could not obtain coordinate indexes, unable to perform subscript
> fatal:["Execute.c":8637]:Execute: Error occurred at or near line 172 in
> file Annualaverage_MOPITTCO_nyg_modified.ncl
>
> I know you are busy, kindly spare some time to assist me look at the
> script as you use to.
>
> Thank you sir.
>
> Najib
>
>
>
> On Tuesday, June 1, 2021, 09:29:32 PM GMT+1, Dennis Shea <shea at ucar.edu>
> wrote:
>
>
> I don't have the time to look at your script right now.
>
> However, The lat/lon ranges are different.
>
> In particular the longitudes. Likely, you will have to make the longitudes
> both be (nominally) 0-to-360 or -180-to180
> You can use *lonFlip*
> <http://www.ncl.ucar.edu/Document/Functions/Contributed/lonFlip.shtml>
> to accomplish this.
>
> Variable: co_model
> Dimensions and sizes: [time | 12] x [lev | 56] x [lat | 192] x [lon |
> 288]
> Coordinates:
> time: [ 31.. 365]
> lev: [1.867879997007549..992.5000106104562]
>
> * lat: [ -90.. 90] lon: [ 0..358.75*]
>
> Variable: cocol_retr
> Dimensions and sizes: [ncl_join | 12] x [XDim_MOP03 | 360] x [YDim_MOP03
> | 180]
> Coordinates:
>
> * XDim_MOP03: [-179.5..179.5] YDim_MOP03:
> [-89.5..89.5]*
> ~
>
> On Tue, Jun 1, 2021 at 5:17 AM Najib Yusuf via ncl-talk <
> ncl-talk at mailman.ucar.edu> wrote:
>
> Dear NCL users,
>
> I am comparing CO from MOPITT satellite retrieval and model CAM output
> with averaging kernel been considered. I am having trouble synchronising
> the coordinates amd the error is:
> fatal:NclOneDValGetClosestIndex: finish coordinate index out of range,
> can't continue
> fatal:Could not obtain coordinate indexes, unable to perform subscript
> fatal:["Execute.c":8637]:Execute: Error occurred at or near line 165 in
> file Annualaverage_MOPITTCO_nyg_modified.ncl ( under: Collect equivalent
> profile)
>
> I look around NCL examples but couldn't figure out how to resolve the
> issue and get the plot.
> Kindly assist to figure out the solution to this. The script Annualaverage_MOPITTCO_nyg_modified.ncl
> and the run CO_MOPITT_MODEL_Comparison_run are attached.
>
> Thank you for your support.
> _______________________________________________
> ncl-talk mailing list
> ncl-talk at mailman.ucar.edu
> List instructions, subscriber options, unsubscribe:
> https://mailman.ucar.edu/mailman/listinfo/ncl-talk
>
> _______________________________________________
> ncl-talk mailing list
> ncl-talk at mailman.ucar.edu
> List instructions, subscriber options, unsubscribe:
> https://mailman.ucar.edu/mailman/listinfo/ncl-talk
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.ucar.edu/pipermail/ncl-talk/attachments/20210603/4b05bc32/attachment.html>
More information about the ncl-talk
mailing list