[Met_help] [rt.rap.ucar.edu #94902] History for MetViewer v2.11 question (UNCLASSIFIED)
John Halley Gotway via RT
met_help at ucar.edu
Mon Apr 27 17:35:32 MDT 2020
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
CLASSIFICATION: UNCLASSIFIED
If I want to plot the number of observations (or matched pairs) which were
used to compute a given continuous error statistic such as ME do I need to
load the MPR.txt files in addition to the .stat files in the database or is
there a way to extract the value (TOTAL) from the .stat files only. I
reference the TOTAL values from the Point-Stat CNT.txt file which shows the
total number of matched pairs.
I did an experiment by loading in one db, just .stat files and in another
db, I loaded the same .stat files and the MPR.txt files together. In
METViewer, when I load the db with no MPR.txt files I do not see the
attribute stat "MPR_OBS" available for selection. When I load the db which
includes both .stat and MPR.txt files, I do see the attribute stat
"MPR_OBS". When I plot this stat, I see what appears to be a number count
which, I believe, is the number of matched pairs or "TOTAL"
R/
John
Mr. John W. Raby
U.S. Army Research Laboratory
White Sands Missile Range, NM 88002
Office:(575) 678-2004 DSN 258-2004
Teleworking: Contact Admin Specialist at (410) 278-6974
FAX (575) 678-1230 DSN 258-1230
Email: john.w.raby2.civ at mail.mil
CLASSIFICATION: UNCLASSIFIED
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: John Halley Gotway
Time: Mon Apr 13 13:28:05 2020
John,
METviewer only loads files ending in the ".stat" (for output for
Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and files
ending in
"_obj.txt" for files from MODE and also the files that MTD creates.
It
does NOT load files ending in "_mpr.txt".
To plot the number of matched pairs included in the computation of
statistics, I'd recommend plotting the TOTAL column from the SL1L2,
CNT, or
CNT statistics line type... as you've already found.
John
On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
met_help at ucar.edu> wrote:
>
> Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> Transaction: Ticket created by john.w.raby2.civ at mail.mil
> Queue: met_help
> Subject: MetViewer v2.11 question (UNCLASSIFIED)
> Owner: Nobody
> Requestors: john.w.raby2.civ at mail.mil
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
>
>
> CLASSIFICATION: UNCLASSIFIED
>
> If I want to plot the number of observations (or matched pairs)
which were
> used to compute a given continuous error statistic such as ME do I
need to
> load the MPR.txt files in addition to the .stat files in the
database or is
> there a way to extract the value (TOTAL) from the .stat files only.
I
> reference the TOTAL values from the Point-Stat CNT.txt file which
shows the
> total number of matched pairs.
>
> I did an experiment by loading in one db, just .stat files and in
another
> db, I loaded the same .stat files and the MPR.txt files together. In
> METViewer, when I load the db with no MPR.txt files I do not see the
> attribute stat "MPR_OBS" available for selection. When I load the db
which
> includes both .stat and MPR.txt files, I do see the attribute stat
> "MPR_OBS". When I plot this stat, I see what appears to be a number
count
> which, I believe, is the number of matched pairs or "TOTAL"
>
> R/
> John
>
> Mr. John W. Raby
> U.S. Army Research Laboratory
> White Sands Missile Range, NM 88002
> Office:(575) 678-2004 DSN 258-2004
> Teleworking: Contact Admin Specialist at (410) 278-6974
> FAX (575) 678-1230 DSN 258-1230
> Email: john.w.raby2.civ at mail.mil
>
>
> CLASSIFICATION: UNCLASSIFIED
>
>
------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Mon Apr 13 13:47:08 2020
CLASSIFICATION: UNCLASSIFIED
Thanks for getting me back on track. I loaded the db containing only
.stat
files and I looked for "TOTAL" in the list of dependent variables but
it isn't
there.
R/
John
-----Original Message-----
From: John Halley Gotway via RT [mailto:met_help at ucar.edu]
Sent: Monday, April 13, 2020 1:28 PM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer v2.11
question (UNCLASSIFIED)
All active links contained in this email were disabled. Please verify
the
identity of the sender, and confirm the authenticity of all links
contained
within the message prior to copying and pasting the address to a Web
browser.
----
John,
METviewer only loads files ending in the ".stat" (for output for
Point-Stat,
Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and files ending in
"_obj.txt" for
files from MODE and also the files that MTD creates. It does NOT load
files
ending in "_mpr.txt".
To plot the number of matched pairs included in the computation of
statistics,
I'd recommend plotting the TOTAL column from the SL1L2, CNT, or CNT
statistics
line type... as you've already found.
John
On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
met_help at ucar.edu> wrote:
>
> Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> Transaction: Ticket created by john.w.raby2.civ at mail.mil
> Queue: met_help
> Subject: MetViewer v2.11 question (UNCLASSIFIED)
> Owner: Nobody
> Requestors: john.w.raby2.civ at mail.mil
> Status: new
> Ticket <Caution-url:
> Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
>
>
> CLASSIFICATION: UNCLASSIFIED
>
> If I want to plot the number of observations (or matched pairs)
which
> were used to compute a given continuous error statistic such as ME
do
> I need to load the MPR.txt files in addition to the .stat files in
the
> database or is there a way to extract the value (TOTAL) from the
.stat
> files only. I reference the TOTAL values from the Point-Stat CNT.txt
> file which shows the total number of matched pairs.
>
> I did an experiment by loading in one db, just .stat files and in
> another db, I loaded the same .stat files and the MPR.txt files
> together. In METViewer, when I load the db with no MPR.txt files I
do
> not see the attribute stat "MPR_OBS" available for selection. When I
> load the db which includes both .stat and MPR.txt files, I do see
the
> attribute stat "MPR_OBS". When I plot this stat, I see what appears
to
> be a number count which, I believe, is the number of matched pairs
or
> "TOTAL"
>
> R/
> John
>
> Mr. John W. Raby
> U.S. Army Research Laboratory
> White Sands Missile Range, NM 88002
> Office:(575) 678-2004 DSN 258-2004
> Teleworking: Contact Admin Specialist at (410) 278-6974 FAX (575)
> 678-1230 DSN 258-1230
> Email: john.w.raby2.civ at mail.mil
>
>
> CLASSIFICATION: UNCLASSIFIED
>
>
CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: John Halley Gotway
Time: Mon Apr 13 13:50:56 2020
John,
Can you tell me what version of METviewer you're running? It should
be
listed in the top-left corner of the GUI window. Plotting the TOTAL
counts
was actually a recent addition in version 3.0. Here's the GitHub
issue
which describes that change:
https://github.com/NCAR/METviewer/issues/170
John
On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
>
> CLASSIFICATION: UNCLASSIFIED
>
> Thanks for getting me back on track. I loaded the db containing only
.stat
> files and I looked for "TOTAL" in the list of dependent variables
but it
> isn't
> there.
>
> R/
> John
>
> -----Original Message-----
> From: John Halley Gotway via RT [mailto:met_help at ucar.edu]
> Sent: Monday, April 13, 2020 1:28 PM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
> Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled. Please
verify the
> identity of the sender, and confirm the authenticity of all links
> contained
> within the message prior to copying and pasting the address to a Web
> browser.
>
>
>
>
> ----
>
> John,
>
> METviewer only loads files ending in the ".stat" (for output for
> Point-Stat,
> Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and files ending in
"_obj.txt"
> for
> files from MODE and also the files that MTD creates. It does NOT
load
> files
> ending in "_mpr.txt".
>
> To plot the number of matched pairs included in the computation of
> statistics,
> I'd recommend plotting the TOTAL column from the SL1L2, CNT, or CNT
> statistics
> line type... as you've already found.
>
> John
>
> On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> met_help at ucar.edu> wrote:
>
> >
> > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > Queue: met_help
> > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > Owner: Nobody
> > Requestors: john.w.raby2.civ at mail.mil
> > Status: new
> > Ticket <Caution-url:
> > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
> >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> > If I want to plot the number of observations (or matched pairs)
which
> > were used to compute a given continuous error statistic such as ME
do
> > I need to load the MPR.txt files in addition to the .stat files in
the
> > database or is there a way to extract the value (TOTAL) from the
.stat
> > files only. I reference the TOTAL values from the Point-Stat
CNT.txt
> > file which shows the total number of matched pairs.
> >
> > I did an experiment by loading in one db, just .stat files and in
> > another db, I loaded the same .stat files and the MPR.txt files
> > together. In METViewer, when I load the db with no MPR.txt files I
do
> > not see the attribute stat "MPR_OBS" available for selection. When
I
> > load the db which includes both .stat and MPR.txt files, I do see
the
> > attribute stat "MPR_OBS". When I plot this stat, I see what
appears to
> > be a number count which, I believe, is the number of matched pairs
or
> > "TOTAL"
> >
> > R/
> > John
> >
> > Mr. John W. Raby
> > U.S. Army Research Laboratory
> > White Sands Missile Range, NM 88002
> > Office:(575) 678-2004 DSN 258-2004
> > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX (575)
> > 678-1230 DSN 258-1230
> > Email: john.w.raby2.civ at mail.mil
> >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> >
>
> CLASSIFICATION: UNCLASSIFIED
>
>
------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Mon Apr 13 14:02:42 2020
CLASSIFICATION: UNCLASSIFIED
John -
My version is v2.11. What do you recommend as the best way to upgrade?
Tatiana
worked with us to install the web interface version 2.11 on my local
linux
workstation last July.
R/
John
-----Original Message-----
From: John Halley Gotway via RT [mailto:met_help at ucar.edu]
Sent: Monday, April 13, 2020 1:51 PM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
v2.11
question (UNCLASSIFIED)
All active links contained in this email were disabled. Please verify
the
identity of the sender, and confirm the authenticity of all links
contained
within the message prior to copying and pasting the address to a Web
browser.
----
John,
Can you tell me what version of METviewer you're running? It should
be listed
in the top-left corner of the GUI window. Plotting the TOTAL counts
was
actually a recent addition in version 3.0. Here's the GitHub issue
which
describes that change:
Caution-https://github.com/NCAR/METviewer/issues/170
John
On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
met_help at ucar.edu> wrote:
>
> <Caution-url:
> Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
>
> CLASSIFICATION: UNCLASSIFIED
>
> Thanks for getting me back on track. I loaded the db containing only
> .stat files and I looked for "TOTAL" in the list of dependent
> variables but it isn't there.
>
> R/
> John
>
> -----Original Message-----
> From: John Halley Gotway via RT [Caution-mailto:met_help at ucar.edu]
> Sent: Monday, April 13, 2020 1:28 PM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
> Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled. Please
verify
> the identity of the sender, and confirm the authenticity of all
links
> contained within the message prior to copying and pasting the
address
> to a Web browser.
>
>
>
>
> ----
>
> John,
>
> METviewer only loads files ending in the ".stat" (for output for
> Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and files
> ending in "_obj.txt"
> for
> files from MODE and also the files that MTD creates. It does NOT
load
> files ending in "_mpr.txt".
>
> To plot the number of matched pairs included in the computation of
> statistics, I'd recommend plotting the TOTAL column from the SL1L2,
> CNT, or CNT statistics line type... as you've already found.
>
> John
>
> On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> met_help at ucar.edu> wrote:
>
> >
> > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > Queue: met_help
> > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > Owner: Nobody
> > Requestors: john.w.raby2.civ at mail.mil
> > Status: new
> > Ticket <Caution-Caution-url:
> > Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > 902 >
> >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> > If I want to plot the number of observations (or matched pairs)
> > which were used to compute a given continuous error statistic such
> > as ME do I need to load the MPR.txt files in addition to the .stat
> > files in the database or is there a way to extract the value
(TOTAL)
> > from the .stat files only. I reference the TOTAL values from the
> > Point-Stat CNT.txt file which shows the total number of matched
pairs.
> >
> > I did an experiment by loading in one db, just .stat files and in
> > another db, I loaded the same .stat files and the MPR.txt files
> > together. In METViewer, when I load the db with no MPR.txt files I
> > do not see the attribute stat "MPR_OBS" available for selection.
> > When I load the db which includes both .stat and MPR.txt files, I
do
> > see the attribute stat "MPR_OBS". When I plot this stat, I see
what
> > appears to be a number count which, I believe, is the number of
> > matched pairs or "TOTAL"
> >
> > R/
> > John
> >
> > Mr. John W. Raby
> > U.S. Army Research Laboratory
> > White Sands Missile Range, NM 88002
> > Office:(575) 678-2004 DSN 258-2004
> > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX (575)
> > 678-1230 DSN 258-1230
> > Email: john.w.raby2.civ at mail.mil
> >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> >
>
> CLASSIFICATION: UNCLASSIFIED
>
>
CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: John Halley Gotway
Time: Mon Apr 13 15:16:41 2020
John,
I just reassigned ownership of this ticket from me to Tatiana.
Tatiana, please advise John Raby on how he can upgrade to METviewer
3.0 so
he can make use of some of its enhancements.
Thanks,
John
On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
met_help at ucar.edu> wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
>
> CLASSIFICATION: UNCLASSIFIED
>
> John -
>
> My version is v2.11. What do you recommend as the best way to
upgrade?
> Tatiana
> worked with us to install the web interface version 2.11 on my local
linux
> workstation last July.
>
> R/
> John
>
> -----Original Message-----
> From: John Halley Gotway via RT [mailto:met_help at ucar.edu]
> Sent: Monday, April 13, 2020 1:51 PM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
> Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
> v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled. Please
verify the
> identity of the sender, and confirm the authenticity of all links
> contained
> within the message prior to copying and pasting the address to a Web
> browser.
>
>
>
>
> ----
>
> John,
>
> Can you tell me what version of METviewer you're running? It should
be
> listed
> in the top-left corner of the GUI window. Plotting the TOTAL counts
was
> actually a recent addition in version 3.0. Here's the GitHub issue
which
> describes that change:
> Caution-https://github.com/NCAR/METviewer/issues/170
>
> John
>
> On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> met_help at ucar.edu> wrote:
>
> >
> > <Caution-url:
> > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> > Thanks for getting me back on track. I loaded the db containing
only
> > .stat files and I looked for "TOTAL" in the list of dependent
> > variables but it isn't there.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT [Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 1:28 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
> > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled. Please
verify
> > the identity of the sender, and confirm the authenticity of all
links
> > contained within the message prior to copying and pasting the
address
> > to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > METviewer only loads files ending in the ".stat" (for output for
> > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and files
> > ending in "_obj.txt"
> > for
> > files from MODE and also the files that MTD creates. It does NOT
load
> > files ending in "_mpr.txt".
> >
> > To plot the number of matched pairs included in the computation of
> > statistics, I'd recommend plotting the TOTAL column from the
SL1L2,
> > CNT, or CNT statistics line type... as you've already found.
> >
> > John
> >
> > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > Queue: met_help
> > > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > Owner: Nobody
> > > Requestors: john.w.raby2.civ at mail.mil
> > > Status: new
> > > Ticket <Caution-Caution-url:
> > > Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > > 902 >
> > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > If I want to plot the number of observations (or matched pairs)
> > > which were used to compute a given continuous error statistic
such
> > > as ME do I need to load the MPR.txt files in addition to the
.stat
> > > files in the database or is there a way to extract the value
(TOTAL)
> > > from the .stat files only. I reference the TOTAL values from the
> > > Point-Stat CNT.txt file which shows the total number of matched
pairs.
> > >
> > > I did an experiment by loading in one db, just .stat files and
in
> > > another db, I loaded the same .stat files and the MPR.txt files
> > > together. In METViewer, when I load the db with no MPR.txt files
I
> > > do not see the attribute stat "MPR_OBS" available for selection.
> > > When I load the db which includes both .stat and MPR.txt files,
I do
> > > see the attribute stat "MPR_OBS". When I plot this stat, I see
what
> > > appears to be a number count which, I believe, is the number of
> > > matched pairs or "TOTAL"
> > >
> > > R/
> > > John
> > >
> > > Mr. John W. Raby
> > > U.S. Army Research Laboratory
> > > White Sands Missile Range, NM 88002
> > > Office:(575) 678-2004 DSN 258-2004
> > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
(575)
> > > 678-1230 DSN 258-1230
> > > Email: john.w.raby2.civ at mail.mil
> > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> >
>
> CLASSIFICATION: UNCLASSIFIED
>
>
------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Mon Apr 13 15:18:38 2020
CLASSIFICATION: UNCLASSIFIED
Thanks, John.
R/
John
-----Original Message-----
From: John Halley Gotway via RT [mailto:met_help at ucar.edu]
Sent: Monday, April 13, 2020 3:17 PM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
v2.11
question (UNCLASSIFIED)
All active links contained in this email were disabled. Please verify
the
identity of the sender, and confirm the authenticity of all links
contained
within the message prior to copying and pasting the address to a Web
browser.
----
John,
I just reassigned ownership of this ticket from me to Tatiana.
Tatiana, please advise John Raby on how he can upgrade to METviewer
3.0 so he
can make use of some of its enhancements.
Thanks,
John
On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
met_help at ucar.edu> wrote:
>
> <Caution-url:
> Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
>
> CLASSIFICATION: UNCLASSIFIED
>
> John -
>
> My version is v2.11. What do you recommend as the best way to
upgrade?
> Tatiana
> worked with us to install the web interface version 2.11 on my local
> linux workstation last July.
>
> R/
> John
>
> -----Original Message-----
> From: John Halley Gotway via RT [Caution-mailto:met_help at ucar.edu]
> Sent: Monday, April 13, 2020 1:51 PM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
> Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
> v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled. Please
verify
> the identity of the sender, and confirm the authenticity of all
links
> contained within the message prior to copying and pasting the
address
> to a Web browser.
>
>
>
>
> ----
>
> John,
>
> Can you tell me what version of METviewer you're running? It should
> be listed in the top-left corner of the GUI window. Plotting the
> TOTAL counts was actually a recent addition in version 3.0. Here's
> the GitHub issue which describes that change:
> Caution-Caution-https://github.com/NCAR/METviewer/issues/170
>
> John
>
> On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> met_help at ucar.edu> wrote:
>
> >
> > <Caution-Caution-url:
> > Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > 902 >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> > Thanks for getting me back on track. I loaded the db containing
only
> > .stat files and I looked for "TOTAL" in the list of dependent
> > variables but it isn't there.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT
> > [Caution-Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 1:28 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
> > v2.11 question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled. Please
> > verify the identity of the sender, and confirm the authenticity of
> > all links contained within the message prior to copying and
pasting
> > the address to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > METviewer only loads files ending in the ".stat" (for output for
> > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and files
> > ending in "_obj.txt"
> > for
> > files from MODE and also the files that MTD creates. It does NOT
> > load files ending in "_mpr.txt".
> >
> > To plot the number of matched pairs included in the computation of
> > statistics, I'd recommend plotting the TOTAL column from the
SL1L2,
> > CNT, or CNT statistics line type... as you've already found.
> >
> > John
> >
> > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > Queue: met_help
> > > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > Owner: Nobody
> > > Requestors: john.w.raby2.civ at mail.mil
> > > Status: new
> > > Ticket <Caution-Caution-Caution-url:
> > > Caution-Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > html?id=94
> > > 902 >
> > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > If I want to plot the number of observations (or matched pairs)
> > > which were used to compute a given continuous error statistic
such
> > > as ME do I need to load the MPR.txt files in addition to the
.stat
> > > files in the database or is there a way to extract the value
> > > (TOTAL) from the .stat files only. I reference the TOTAL values
> > > from the Point-Stat CNT.txt file which shows the total number of
matched
> > > pairs.
> > >
> > > I did an experiment by loading in one db, just .stat files and
in
> > > another db, I loaded the same .stat files and the MPR.txt files
> > > together. In METViewer, when I load the db with no MPR.txt files
I
> > > do not see the attribute stat "MPR_OBS" available for selection.
> > > When I load the db which includes both .stat and MPR.txt files,
I
> > > do see the attribute stat "MPR_OBS". When I plot this stat, I
see
> > > what appears to be a number count which, I believe, is the
number
> > > of matched pairs or "TOTAL"
> > >
> > > R/
> > > John
> > >
> > > Mr. John W. Raby
> > > U.S. Army Research Laboratory
> > > White Sands Missile Range, NM 88002
> > > Office:(575) 678-2004 DSN 258-2004
> > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
(575)
> > > 678-1230 DSN 258-1230
> > > Email: john.w.raby2.civ at mail.mil
> > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> >
>
> CLASSIFICATION: UNCLASSIFIED
>
>
CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: Tatiana Burek
Time: Tue Apr 14 09:17:49 2020
Hi John,
As I remember, I shared with you .war and .tar files with METviewer
executables and the web app. I also gave you instructions where and
how to install these files.
I can build METviewer 3.0 for you and you will install it the same way
as METviewer 2.11. There is one more step you need to do for this
release. We updated the database schema and you need to update your
databases to work with v 3.0. I will provide SQL script that should
take care of that. You just need to run it on all METviewer databases.
Let me know if you would like to proceed with the update and I will
sent files to you.
Tatiana
On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> CLASSIFICATION: UNCLASSIFIED
>
> Thanks, John.
>
> R/
> John
>
> -----Original Message-----
> From: John Halley Gotway via RT [mailto:met_help at ucar.edu]
> Sent: Monday, April 13, 2020 3:17 PM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
> Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled. Please
verify
> the
> identity of the sender, and confirm the authenticity of all links
> contained
> within the message prior to copying and pasting the address to a Web
> browser.
>
>
>
>
> ----
>
> John,
>
> I just reassigned ownership of this ticket from me to Tatiana.
>
> Tatiana, please advise John Raby on how he can upgrade to METviewer
> 3.0 so he
> can make use of some of its enhancements.
>
> Thanks,
> John
>
> On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> met_help at ucar.edu> wrote:
>
> >
> > <Caution-url:
> > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94902 >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> > John -
> >
> > My version is v2.11. What do you recommend as the best way to
> > upgrade?
> > Tatiana
> > worked with us to install the web interface version 2.11 on my
local
> > linux workstation last July.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT [Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 1:51 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> > v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled. Please
> > verify
> > the identity of the sender, and confirm the authenticity of all
links
> > contained within the message prior to copying and pasting the
address
> > to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > Can you tell me what version of METviewer you're running? It
should
> > be listed in the top-left corner of the GUI window. Plotting the
> > TOTAL counts was actually a recent addition in version 3.0.
Here's
> > the GitHub issue which describes that change:
> > Caution-Caution-https://github.com/NCAR/METviewer/issues/170
> >
> > John
> >
> > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > <Caution-Caution-url:
> > > Caution-Caution-
> > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > > 902 >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > Thanks for getting me back on track. I loaded the db containing
> > > only
> > > .stat files and I looked for "TOTAL" in the list of dependent
> > > variables but it isn't there.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT
> > > [Caution-Caution-mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 1:28 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
> > > v2.11 question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled. Please
> > > verify the identity of the sender, and confirm the authenticity
of
> > > all links contained within the message prior to copying and
pasting
> > > the address to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > METviewer only loads files ending in the ".stat" (for output for
> > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and
files
> > > ending in "_obj.txt"
> > > for
> > > files from MODE and also the files that MTD creates. It does
NOT
> > > load files ending in "_mpr.txt".
> > >
> > > To plot the number of matched pairs included in the computation
of
> > > statistics, I'd recommend plotting the TOTAL column from the
SL1L2,
> > > CNT, or CNT statistics line type... as you've already found.
> > >
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > > Queue: met_help
> > > > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > > Owner: Nobody
> > > > Requestors: john.w.raby2.civ at mail.mil
> > > > Status: new
> > > > Ticket <Caution-Caution-Caution-url:
> > > > Caution-Caution-Caution-
> > > > https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > html?id=94
> > > > 902 >
> > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > If I want to plot the number of observations (or matched
pairs)
> > > > which were used to compute a given continuous error statistic
> > > > such
> > > > as ME do I need to load the MPR.txt files in addition to the
> > > > .stat
> > > > files in the database or is there a way to extract the value
> > > > (TOTAL) from the .stat files only. I reference the TOTAL
values
> > > > from the Point-Stat CNT.txt file which shows the total number
of
> > > > matched
> > > > pairs.
> > > >
> > > > I did an experiment by loading in one db, just .stat files and
in
> > > > another db, I loaded the same .stat files and the MPR.txt
files
> > > > together. In METViewer, when I load the db with no MPR.txt
files
> > > > I
> > > > do not see the attribute stat "MPR_OBS" available for
selection.
> > > > When I load the db which includes both .stat and MPR.txt
files, I
> > > > do see the attribute stat "MPR_OBS". When I plot this stat, I
see
> > > > what appears to be a number count which, I believe, is the
number
> > > > of matched pairs or "TOTAL"
> > > >
> > > > R/
> > > > John
> > > >
> > > > Mr. John W. Raby
> > > > U.S. Army Research Laboratory
> > > > White Sands Missile Range, NM 88002
> > > > Office:(575) 678-2004 DSN 258-2004
> > > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
(575)
> > > > 678-1230 DSN 258-1230
> > > > Email: john.w.raby2.civ at mail.mil
> > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> >
>
> CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Tue Apr 14 10:29:39 2020
CLASSIFICATION: UNCLASSIFIED
Tatiana -
Thanks for your quick response and your offer to build METViewer 3.0
for me.
Yes, you are correct about the way the previous version was installed.
Understand that the installation for V3.0 will be similar to the
previous
except for running the script for the db update.
My concern about doing the install now is because I don't have ready
access to
my Linux system admin person who was involved. He still works for us,
just not
easy to work with him in this environment where we are all teleworking
from
home. I would like to do the install, but it might be better to delay
it until
we return to normal again.
I re-discovered a way to accomplish the plotting of the TOTAL value
associated
with the error statistics. I say re-discovered, because I can't recall
how I
originally came across it. Maybe in one of our earlier emails you
mentioned it
or it was something which I found in one of your example
load_spec_files which
made me think about the possibility of ingesting mpr.txt files into
METViewer.
There is some code in the file which allows you to set "True" to a
statement
which appears to specify loading of mpr.txt files. I tried that
yesterday and
indeed it seems to work. When I run mv_load.sh using that
load_spec_file and
specify the directory containing both .stat and mpr.txt files as the
location
of the data to be put into the database, the menus for the Y1 dep
variable
show "MPR_OBS" and "MPR_FCST" as options. I also tested loading .stat
files
only and these two options do not show up. I gather that this was a
preliminary capability which was made part of V2.11 to accomplish the
plotting
of TOTAL values. See attached plot which plots the TOTAL value for
both the
FCST values and the OBS values. The values are at the top of the plot
along
the x-axis. I would like to hear your thoughts about this approach to
plotting TOTAL values since I am not sure how it is really working.
R/
John
Mr. John W. Raby
U.S. Army Research Laboratory
White Sands Missile Range, NM 88002
Office:(575) 678-2004 DSN 258-2004
Teleworking: Contact Admin Specialist at (410) 278-6974
FAX (575) 678-1230 DSN 258-1230
Email: john.w.raby2.civ at mail.mil
-----Original Message-----
From: Tatiana Burek via RT [mailto:met_help at ucar.edu]
Sent: Tuesday, April 14, 2020 9:18 AM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11
question
(UNCLASSIFIED)
All active links contained in this email were disabled. Please verify
the
identity of the sender, and confirm the authenticity of all links
contained
within the message prior to copying and pasting the address to a Web
browser.
----
Hi John,
As I remember, I shared with you .war and .tar files with METviewer
executables and the web app. I also gave you instructions where and
how to
install these files.
I can build METviewer 3.0 for you and you will install it the same way
as
METviewer 2.11. There is one more step you need to do for this
release. We
updated the database schema and you need to update your databases to
work with
v 3.0. I will provide SQL script that should take care of that. You
just need
to run it on all METviewer databases.
Let me know if you would like to proceed with the update and I will
sent files
to you.
Tatiana
On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> CLASSIFICATION: UNCLASSIFIED
>
> Thanks, John.
>
> R/
> John
>
> -----Original Message-----
> From: John Halley Gotway via RT [Caution-mailto:met_help at ucar.edu]
> Sent: Monday, April 13, 2020 3:17 PM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
> Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> v2.11
> question (UNCLASSIFIED)
>
> All active links contained in this email were disabled. Please
verify
> the identity of the sender, and confirm the authenticity of all
links
> contained within the message prior to copying and pasting the
address
> to a Web browser.
>
>
>
>
> ----
>
> John,
>
> I just reassigned ownership of this ticket from me to Tatiana.
>
> Tatiana, please advise John Raby on how he can upgrade to METviewer
> 3.0 so he
> can make use of some of its enhancements.
>
> Thanks,
> John
>
> On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> met_help at ucar.edu> wrote:
>
> >
> > <Caution-Caution-url:
> > Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > 902 >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> > John -
> >
> > My version is v2.11. What do you recommend as the best way to
> > upgrade?
> > Tatiana
> > worked with us to install the web interface version 2.11 on my
local
> > linux workstation last July.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT
> > [Caution-Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 1:51 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> > v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled. Please
> > verify the identity of the sender, and confirm the authenticity of
> > all links contained within the message prior to copying and
pasting
> > the address to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > Can you tell me what version of METviewer you're running? It
should
> > be listed in the top-left corner of the GUI window. Plotting the
> > TOTAL counts was actually a recent addition in version 3.0.
Here's
> > the GitHub issue which describes that change:
> > Caution-Caution-Caution-
https://github.com/NCAR/METviewer/issues/170
> >
> > John
> >
> > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > <Caution-Caution-Caution-url:
> > > Caution-Caution-
> > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > > 902 >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > Thanks for getting me back on track. I loaded the db containing
> > > only .stat files and I looked for "TOTAL" in the list of
dependent
> > > variables but it isn't there.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT
> > > [Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 1:28 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902] MetViewer
> > > v2.11 question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled. Please
> > > verify the identity of the sender, and confirm the authenticity
of
> > > all links contained within the message prior to copying and
> > > pasting the address to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > METviewer only loads files ending in the ".stat" (for output for
> > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and
files
> > > ending in "_obj.txt"
> > > for
> > > files from MODE and also the files that MTD creates. It does
NOT
> > > load files ending in "_mpr.txt".
> > >
> > > To plot the number of matched pairs included in the computation
of
> > > statistics, I'd recommend plotting the TOTAL column from the
> > > SL1L2, CNT, or CNT statistics line type... as you've already
found.
> > >
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > > Queue: met_help
> > > > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > > Owner: Nobody
> > > > Requestors: john.w.raby2.civ at mail.mil
> > > > Status: new
> > > > Ticket <Caution-Caution-Caution-Caution-url:
> > > > Caution-Caution-Caution-
> > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > html?id=94
> > > > 902 >
> > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > If I want to plot the number of observations (or matched
pairs)
> > > > which were used to compute a given continuous error statistic
> > > > such as ME do I need to load the MPR.txt files in addition to
> > > > the .stat files in the database or is there a way to extract
the
> > > > value
> > > > (TOTAL) from the .stat files only. I reference the TOTAL
values
> > > > from the Point-Stat CNT.txt file which shows the total number
of
> > > > matched pairs.
> > > >
> > > > I did an experiment by loading in one db, just .stat files and
> > > > in another db, I loaded the same .stat files and the MPR.txt
> > > > files together. In METViewer, when I load the db with no
MPR.txt
> > > > files I do not see the attribute stat "MPR_OBS" available for
> > > > selection.
> > > > When I load the db which includes both .stat and MPR.txt
files,
> > > > I do see the attribute stat "MPR_OBS". When I plot this stat,
I
> > > > see what appears to be a number count which, I believe, is the
> > > > number of matched pairs or "TOTAL"
> > > >
> > > > R/
> > > > John
> > > >
> > > > Mr. John W. Raby
> > > > U.S. Army Research Laboratory
> > > > White Sands Missile Range, NM 88002
> > > > Office:(575) 678-2004 DSN 258-2004
> > > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
> > > > (575)
> > > > 678-1230 DSN 258-1230
> > > > Email: john.w.raby2.civ at mail.mil
> > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED
> >
> >
>
> CLASSIFICATION: UNCLASSIFIED
CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: Tatiana Burek
Time: Tue Apr 14 14:45:35 2020
John,
METviewer doesn't load mpr.txt - only .stat.
If in your load.xml you specify <load_mpr>true</load_mpr> than
METviewer will load records from .stat file with MPR line type. If you
choose <load_mpr>false</load_mpr> - those record will be omitted.
The values that are displayed in your plot on X2 axis are the number
of records that got processed for each independent variable.
n_records_for_mpr_fcst + n_records_for_mpr_obs.
Since you selected only one day and I assume you don't have any other
parameters like vx_mask that have multiple values in this particular
date than the values on X2 should be that you expect.
Tatiana
On Tue Apr 14 10:29:39 2020, john.w.raby2.civ at mail.mil wrote:
> CLASSIFICATION: UNCLASSIFIED
>
> Tatiana -
>
> Thanks for your quick response and your offer to build METViewer 3.0
> for me.
>
> Yes, you are correct about the way the previous version was
installed.
> Understand that the installation for V3.0 will be similar to the
> previous
> except for running the script for the db update.
>
> My concern about doing the install now is because I don't have ready
> access to
> my Linux system admin person who was involved. He still works for
us,
> just not
> easy to work with him in this environment where we are all
teleworking
> from
> home. I would like to do the install, but it might be better to
delay
> it until
> we return to normal again.
>
> I re-discovered a way to accomplish the plotting of the TOTAL value
> associated
> with the error statistics. I say re-discovered, because I can't
recall
> how I
> originally came across it. Maybe in one of our earlier emails you
> mentioned it
> or it was something which I found in one of your example
> load_spec_files which
> made me think about the possibility of ingesting mpr.txt files into
> METViewer.
> There is some code in the file which allows you to set "True" to a
> statement
> which appears to specify loading of mpr.txt files. I tried that
> yesterday and
> indeed it seems to work. When I run mv_load.sh using that
> load_spec_file and
> specify the directory containing both .stat and mpr.txt files as the
> location
> of the data to be put into the database, the menus for the Y1 dep
> variable
> show "MPR_OBS" and "MPR_FCST" as options. I also tested loading
.stat
> files
> only and these two options do not show up. I gather that this was a
> preliminary capability which was made part of V2.11 to accomplish
the
> plotting
> of TOTAL values. See attached plot which plots the TOTAL value for
> both the
> FCST values and the OBS values. The values are at the top of the
plot
> along
> the x-axis. I would like to hear your thoughts about this approach
to
> plotting TOTAL values since I am not sure how it is really working.
>
> R/
> John
>
> Mr. John W. Raby
> U.S. Army Research Laboratory
> White Sands Missile Range, NM 88002
> Office:(575) 678-2004 DSN 258-2004
> Teleworking: Contact Admin Specialist at (410) 278-6974
> FAX (575) 678-1230 DSN 258-1230
> Email: john.w.raby2.civ at mail.mil
>
>
>
>
>
> -----Original Message-----
> From: Tatiana Burek via RT [mailto:met_help at ucar.edu]
> Sent: Tuesday, April 14, 2020 9:18 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11
> question
> (UNCLASSIFIED)
>
> All active links contained in this email were disabled. Please
verify
> the
> identity of the sender, and confirm the authenticity of all links
> contained
> within the message prior to copying and pasting the address to a Web
> browser.
>
>
>
>
> ----
>
> Hi John,
>
> As I remember, I shared with you .war and .tar files with METviewer
> executables and the web app. I also gave you instructions where and
> how to
> install these files.
> I can build METviewer 3.0 for you and you will install it the same
way
> as
> METviewer 2.11. There is one more step you need to do for this
> release. We
> updated the database schema and you need to update your databases to
> work with
> v 3.0. I will provide SQL script that should take care of that. You
> just need
> to run it on all METviewer databases.
> Let me know if you would like to proceed with the update and I will
> sent files
> to you.
>
> Tatiana
>
> On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> > Thanks, John.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT [Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 3:17 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> > v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled. Please
> > verify
> > the identity of the sender, and confirm the authenticity of all
links
> > contained within the message prior to copying and pasting the
address
> > to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > I just reassigned ownership of this ticket from me to Tatiana.
> >
> > Tatiana, please advise John Raby on how he can upgrade to
METviewer
> > 3.0 so he
> > can make use of some of its enhancements.
> >
> > Thanks,
> > John
> >
> > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > <Caution-Caution-url:
> > > Caution-Caution-
> > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > > 902 >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > John -
> > >
> > > My version is v2.11. What do you recommend as the best way to
> > > upgrade?
> > > Tatiana
> > > worked with us to install the web interface version 2.11 on my
> > > local
> > > linux workstation last July.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT
> > > [Caution-Caution-mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 1:51 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > MetViewer
> > > v2.11
> > > question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled. Please
> > > verify the identity of the sender, and confirm the authenticity
of
> > > all links contained within the message prior to copying and
pasting
> > > the address to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > Can you tell me what version of METviewer you're running? It
> > > should
> > > be listed in the top-left corner of the GUI window. Plotting
the
> > > TOTAL counts was actually a recent addition in version 3.0.
Here's
> > > the GitHub issue which describes that change:
> > > Caution-Caution-Caution-
> > > https://github.com/NCAR/METviewer/issues/170
> > >
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > <Caution-Caution-Caution-url:
> > > > Caution-Caution-
> > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > > > 902 >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > Thanks for getting me back on track. I loaded the db
containing
> > > > only .stat files and I looked for "TOTAL" in the list of
> > > > dependent
> > > > variables but it isn't there.
> > > >
> > > > R/
> > > > John
> > > >
> > > > -----Original Message-----
> > > > From: John Halley Gotway via RT
> > > > [Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > > Sent: Monday, April 13, 2020 1:28 PM
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > > <john.w.raby2.civ at mail.mil>
> > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> > > > v2.11 question (UNCLASSIFIED)
> > > >
> > > > All active links contained in this email were disabled.
Please
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of
> > > > all links contained within the message prior to copying and
> > > > pasting the address to a Web browser.
> > > >
> > > >
> > > >
> > > >
> > > > ----
> > > >
> > > > John,
> > > >
> > > > METviewer only loads files ending in the ".stat" (for output
for
> > > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and
files
> > > > ending in "_obj.txt"
> > > > for
> > > > files from MODE and also the files that MTD creates. It does
NOT
> > > > load files ending in "_mpr.txt".
> > > >
> > > > To plot the number of matched pairs included in the
computation
> > > > of
> > > > statistics, I'd recommend plotting the TOTAL column from the
> > > > SL1L2, CNT, or CNT statistics line type... as you've already
> > > > found.
> > > >
> > > > John
> > > >
> > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > > > met_help at ucar.edu> wrote:
> > > >
> > > > >
> > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > > > Queue: met_help
> > > > > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > > > Owner: Nobody
> > > > > Requestors: john.w.raby2.civ at mail.mil
> > > > > Status: new
> > > > > Ticket <Caution-Caution-Caution-Caution-url:
> > > > > Caution-Caution-Caution-
> > > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > > html?id=94
> > > > > 902 >
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > > If I want to plot the number of observations (or matched
pairs)
> > > > > which were used to compute a given continuous error
statistic
> > > > > such as ME do I need to load the MPR.txt files in addition
to
> > > > > the .stat files in the database or is there a way to extract
> > > > > the
> > > > > value
> > > > > (TOTAL) from the .stat files only. I reference the TOTAL
values
> > > > > from the Point-Stat CNT.txt file which shows the total
number
> > > > > of
> > > > > matched pairs.
> > > > >
> > > > > I did an experiment by loading in one db, just .stat files
and
> > > > > in another db, I loaded the same .stat files and the MPR.txt
> > > > > files together. In METViewer, when I load the db with no
> > > > > MPR.txt
> > > > > files I do not see the attribute stat "MPR_OBS" available
for
> > > > > selection.
> > > > > When I load the db which includes both .stat and MPR.txt
files,
> > > > > I do see the attribute stat "MPR_OBS". When I plot this
stat, I
> > > > > see what appears to be a number count which, I believe, is
the
> > > > > number of matched pairs or "TOTAL"
> > > > >
> > > > > R/
> > > > > John
> > > > >
> > > > > Mr. John W. Raby
> > > > > U.S. Army Research Laboratory
> > > > > White Sands Missile Range, NM 88002
> > > > > Office:(575) 678-2004 DSN 258-2004
> > > > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
> > > > > (575)
> > > > > 678-1230 DSN 258-1230
> > > > > Email: john.w.raby2.civ at mail.mil
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED
>
>
>
> CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: Tatiana Burek
Time: Tue Apr 14 14:48:36 2020
I reassigned ownership of this ticket back to John.
John,
could you verify that my assumption about the TOTAL values is
correct.
Thanks,
Tatiana
On Tue Apr 14 14:45:35 2020, tatiana wrote:
> John,
> METviewer doesn't load mpr.txt - only .stat.
> If in your load.xml you specify <load_mpr>true</load_mpr> than
> METviewer will load records from .stat file with MPR line type. If
you
> choose <load_mpr>false</load_mpr> - those record will be omitted.
>
> The values that are displayed in your plot on X2 axis are the number
> of records that got processed for each independent variable.
> n_records_for_mpr_fcst + n_records_for_mpr_obs.
> Since you selected only one day and I assume you don't have any
other
> parameters like vx_mask that have multiple values in this particular
> date than the values on X2 should be that you expect.
>
> Tatiana
>
>
> On Tue Apr 14 10:29:39 2020, john.w.raby2.civ at mail.mil wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> > Tatiana -
> >
> > Thanks for your quick response and your offer to build METViewer
3.0
> > for me.
> >
> > Yes, you are correct about the way the previous version was
> > installed.
> > Understand that the installation for V3.0 will be similar to the
> > previous
> > except for running the script for the db update.
> >
> > My concern about doing the install now is because I don't have
ready
> > access to
> > my Linux system admin person who was involved. He still works for
us,
> > just not
> > easy to work with him in this environment where we are all
> > teleworking
> > from
> > home. I would like to do the install, but it might be better to
delay
> > it until
> > we return to normal again.
> >
> > I re-discovered a way to accomplish the plotting of the TOTAL
value
> > associated
> > with the error statistics. I say re-discovered, because I can't
> > recall
> > how I
> > originally came across it. Maybe in one of our earlier emails you
> > mentioned it
> > or it was something which I found in one of your example
> > load_spec_files which
> > made me think about the possibility of ingesting mpr.txt files
into
> > METViewer.
> > There is some code in the file which allows you to set "True" to a
> > statement
> > which appears to specify loading of mpr.txt files. I tried that
> > yesterday and
> > indeed it seems to work. When I run mv_load.sh using that
> > load_spec_file and
> > specify the directory containing both .stat and mpr.txt files as
the
> > location
> > of the data to be put into the database, the menus for the Y1 dep
> > variable
> > show "MPR_OBS" and "MPR_FCST" as options. I also tested loading
.stat
> > files
> > only and these two options do not show up. I gather that this was
a
> > preliminary capability which was made part of V2.11 to accomplish
the
> > plotting
> > of TOTAL values. See attached plot which plots the TOTAL value for
> > both the
> > FCST values and the OBS values. The values are at the top of the
plot
> > along
> > the x-axis. I would like to hear your thoughts about this
approach
> > to
> > plotting TOTAL values since I am not sure how it is really
working.
> >
> > R/
> > John
> >
> > Mr. John W. Raby
> > U.S. Army Research Laboratory
> > White Sands Missile Range, NM 88002
> > Office:(575) 678-2004 DSN 258-2004
> > Teleworking: Contact Admin Specialist at (410) 278-6974
> > FAX (575) 678-1230 DSN 258-1230
> > Email: john.w.raby2.civ at mail.mil
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: Tatiana Burek via RT [mailto:met_help at ucar.edu]
> > Sent: Tuesday, April 14, 2020 9:18 AM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> > Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11
> > question
> > (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled. Please
> > verify
> > the
> > identity of the sender, and confirm the authenticity of all links
> > contained
> > within the message prior to copying and pasting the address to a
Web
> > browser.
> >
> >
> >
> >
> > ----
> >
> > Hi John,
> >
> > As I remember, I shared with you .war and .tar files with
METviewer
> > executables and the web app. I also gave you instructions where
and
> > how to
> > install these files.
> > I can build METviewer 3.0 for you and you will install it the same
> > way
> > as
> > METviewer 2.11. There is one more step you need to do for this
> > release. We
> > updated the database schema and you need to update your databases
to
> > work with
> > v 3.0. I will provide SQL script that should take care of that.
You
> > just need
> > to run it on all METviewer databases.
> > Let me know if you would like to proceed with the update and I
will
> > sent files
> > to you.
> >
> > Tatiana
> >
> > On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > Thanks, John.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT [Caution-
mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 3:17 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > MetViewer
> > > v2.11
> > > question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled. Please
> > > verify
> > > the identity of the sender, and confirm the authenticity of all
> > > links
> > > contained within the message prior to copying and pasting the
> > > address
> > > to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > I just reassigned ownership of this ticket from me to Tatiana.
> > >
> > > Tatiana, please advise John Raby on how he can upgrade to
METviewer
> > > 3.0 so he
> > > can make use of some of its enhancements.
> > >
> > > Thanks,
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > <Caution-Caution-url:
> > > > Caution-Caution-
> > > > https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > > > 902 >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > John -
> > > >
> > > > My version is v2.11. What do you recommend as the best way to
> > > > upgrade?
> > > > Tatiana
> > > > worked with us to install the web interface version 2.11 on my
> > > > local
> > > > linux workstation last July.
> > > >
> > > > R/
> > > > John
> > > >
> > > > -----Original Message-----
> > > > From: John Halley Gotway via RT
> > > > [Caution-Caution-mailto:met_help at ucar.edu]
> > > > Sent: Monday, April 13, 2020 1:51 PM
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > > <john.w.raby2.civ at mail.mil>
> > > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > > MetViewer
> > > > v2.11
> > > > question (UNCLASSIFIED)
> > > >
> > > > All active links contained in this email were disabled.
Please
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of
> > > > all links contained within the message prior to copying and
> > > > pasting
> > > > the address to a Web browser.
> > > >
> > > >
> > > >
> > > >
> > > > ----
> > > >
> > > > John,
> > > >
> > > > Can you tell me what version of METviewer you're running? It
> > > > should
> > > > be listed in the top-left corner of the GUI window. Plotting
the
> > > > TOTAL counts was actually a recent addition in version 3.0.
> > > > Here's
> > > > the GitHub issue which describes that change:
> > > > Caution-Caution-Caution-
> > > > https://github.com/NCAR/METviewer/issues/170
> > > >
> > > > John
> > > >
> > > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > > > met_help at ucar.edu> wrote:
> > > >
> > > > >
> > > > > <Caution-Caution-Caution-url:
> > > > > Caution-Caution-
> > > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > > > > 902 >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > > Thanks for getting me back on track. I loaded the db
containing
> > > > > only .stat files and I looked for "TOTAL" in the list of
> > > > > dependent
> > > > > variables but it isn't there.
> > > > >
> > > > > R/
> > > > > John
> > > > >
> > > > > -----Original Message-----
> > > > > From: John Halley Gotway via RT
> > > > > [Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > > > Sent: Monday, April 13, 2020 1:28 PM
> > > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > > > <john.w.raby2.civ at mail.mil>
> > > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > > > MetViewer
> > > > > v2.11 question (UNCLASSIFIED)
> > > > >
> > > > > All active links contained in this email were disabled.
Please
> > > > > verify the identity of the sender, and confirm the
authenticity
> > > > > of
> > > > > all links contained within the message prior to copying and
> > > > > pasting the address to a Web browser.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ----
> > > > >
> > > > > John,
> > > > >
> > > > > METviewer only loads files ending in the ".stat" (for output
> > > > > for
> > > > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and
> > > > > files
> > > > > ending in "_obj.txt"
> > > > > for
> > > > > files from MODE and also the files that MTD creates. It
does
> > > > > NOT
> > > > > load files ending in "_mpr.txt".
> > > > >
> > > > > To plot the number of matched pairs included in the
computation
> > > > > of
> > > > > statistics, I'd recommend plotting the TOTAL column from the
> > > > > SL1L2, CNT, or CNT statistics line type... as you've already
> > > > > found.
> > > > >
> > > > > John
> > > > >
> > > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT
<
> > > > > met_help at ucar.edu> wrote:
> > > > >
> > > > > >
> > > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > > > > Queue: met_help
> > > > > > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > > > > Owner: Nobody
> > > > > > Requestors: john.w.raby2.civ at mail.mil
> > > > > > Status: new
> > > > > > Ticket <Caution-Caution-Caution-Caution-url:
> > > > > > Caution-Caution-Caution-
> > > > > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > > > html?id=94
> > > > > > 902 >
> > > > > >
> > > > > >
> > > > > > CLASSIFICATION: UNCLASSIFIED
> > > > > >
> > > > > > If I want to plot the number of observations (or matched
> > > > > > pairs)
> > > > > > which were used to compute a given continuous error
statistic
> > > > > > such as ME do I need to load the MPR.txt files in addition
to
> > > > > > the .stat files in the database or is there a way to
extract
> > > > > > the
> > > > > > value
> > > > > > (TOTAL) from the .stat files only. I reference the TOTAL
> > > > > > values
> > > > > > from the Point-Stat CNT.txt file which shows the total
number
> > > > > > of
> > > > > > matched pairs.
> > > > > >
> > > > > > I did an experiment by loading in one db, just .stat files
> > > > > > and
> > > > > > in another db, I loaded the same .stat files and the
MPR.txt
> > > > > > files together. In METViewer, when I load the db with no
> > > > > > MPR.txt
> > > > > > files I do not see the attribute stat "MPR_OBS" available
for
> > > > > > selection.
> > > > > > When I load the db which includes both .stat and MPR.txt
> > > > > > files,
> > > > > > I do see the attribute stat "MPR_OBS". When I plot this
stat,
> > > > > > I
> > > > > > see what appears to be a number count which, I believe, is
> > > > > > the
> > > > > > number of matched pairs or "TOTAL"
> > > > > >
> > > > > > R/
> > > > > > John
> > > > > >
> > > > > > Mr. John W. Raby
> > > > > > U.S. Army Research Laboratory
> > > > > > White Sands Missile Range, NM 88002
> > > > > > Office:(575) 678-2004 DSN 258-2004
> > > > > > Teleworking: Contact Admin Specialist at (410) 278-6974
FAX
> > > > > > (575)
> > > > > > 678-1230 DSN 258-1230
> > > > > > Email: john.w.raby2.civ at mail.mil
> > > > > >
> > > > > >
> > > > > > CLASSIFICATION: UNCLASSIFIED
> > > > > >
> > > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> >
> >
> >
> > CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
Subject: MetViewer v2.11 question (UNCLASSIFIED)
From: Raby, John W USA CIV
Time: Tue Apr 14 15:06:31 2020
CLASSIFICATION: UNCLASSIFIED
Tatiana -
Thanks for explaining what METViewer is really doing. I guess it just
ignored
the mpr.txt files. This is really good info!
I really had to be careful to avoid having .stat files with the same
hour,
such as 1200Z on 11 NOV and 1200Z on 12 NOV because I saw that the
values on
the X2 axis were double what I expected. When I fixed that, the
numbers all
came up fine.
I will be in touch about the upgrade when things are back to normal.
Take care.
R/
John
-----Original Message-----
From: Tatiana Burek via RT [mailto:met_help at ucar.edu]
Sent: Tuesday, April 14, 2020 2:46 PM
To: Raby, John W CIV USARMY CCDC ARL (USA) <john.w.raby2.civ at mail.mil>
Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11
question
(UNCLASSIFIED)
All active links contained in this email were disabled. Please verify
the
identity of the sender, and confirm the authenticity of all links
contained
within the message prior to copying and pasting the address to a Web
browser.
----
John,
METviewer doesn't load mpr.txt - only .stat.
If in your load.xml you specify <load_mpr>true</load_mpr> than
METviewer will
load records from .stat file with MPR line type. If you choose
<load_mpr>false</load_mpr> - those record will be omitted.
The values that are displayed in your plot on X2 axis are the number
of
records that got processed for each independent variable.
n_records_for_mpr_fcst + n_records_for_mpr_obs.
Since you selected only one day and I assume you don't have any other
parameters like vx_mask that have multiple values in this particular
date than
the values on X2 should be that you expect.
Tatiana
On Tue Apr 14 10:29:39 2020, john.w.raby2.civ at mail.mil wrote:
> CLASSIFICATION: UNCLASSIFIED
>
> Tatiana -
>
> Thanks for your quick response and your offer to build METViewer 3.0
> for me.
>
> Yes, you are correct about the way the previous version was
installed.
> Understand that the installation for V3.0 will be similar to the
> previous except for running the script for the db update.
>
> My concern about doing the install now is because I don't have ready
> access to my Linux system admin person who was involved. He still
> works for us, just not easy to work with him in this environment
where
> we are all teleworking from home. I would like to do the install,
but
> it might be better to delay it until we return to normal again.
>
> I re-discovered a way to accomplish the plotting of the TOTAL value
> associated with the error statistics. I say re-discovered, because I
> can't recall how I originally came across it. Maybe in one of our
> earlier emails you mentioned it or it was something which I found in
> one of your example load_spec_files which made me think about the
> possibility of ingesting mpr.txt files into METViewer.
> There is some code in the file which allows you to set "True" to a
> statement which appears to specify loading of mpr.txt files. I tried
> that yesterday and indeed it seems to work. When I run mv_load.sh
> using that load_spec_file and specify the directory containing both
> .stat and mpr.txt files as the location of the data to be put into
the
> database, the menus for the Y1 dep variable show "MPR_OBS" and
> "MPR_FCST" as options. I also tested loading .stat files only and
> these two options do not show up. I gather that this was a
preliminary
> capability which was made part of V2.11 to accomplish the plotting
of
> TOTAL values. See attached plot which plots the TOTAL value for both
> the FCST values and the OBS values. The values are at the top of the
> plot along the x-axis. I would like to hear your thoughts about
this
> approach to plotting TOTAL values since I am not sure how it is
really
> working.
>
> R/
> John
>
> Mr. John W. Raby
> U.S. Army Research Laboratory
> White Sands Missile Range, NM 88002
> Office:(575) 678-2004 DSN 258-2004
> Teleworking: Contact Admin Specialist at (410) 278-6974 FAX (575)
> 678-1230 DSN 258-1230
> Email: john.w.raby2.civ at mail.mil
>
>
>
>
>
> -----Original Message-----
> From: Tatiana Burek via RT [Caution-mailto:met_help at ucar.edu]
> Sent: Tuesday, April 14, 2020 9:18 AM
> To: Raby, John W CIV USARMY CCDC ARL (USA)
<john.w.raby2.civ at mail.mil>
> Subject: [Non-DoD Source] [rt.rap.ucar.edu #94902] MetViewer v2.11
> question
> (UNCLASSIFIED)
>
> All active links contained in this email were disabled. Please
verify
> the identity of the sender, and confirm the authenticity of all
links
> contained within the message prior to copying and pasting the
address
> to a Web browser.
>
>
>
>
> ----
>
> Hi John,
>
> As I remember, I shared with you .war and .tar files with METviewer
> executables and the web app. I also gave you instructions where and
> how to install these files.
> I can build METviewer 3.0 for you and you will install it the same
way
> as METviewer 2.11. There is one more step you need to do for this
> release. We updated the database schema and you need to update your
> databases to work with v 3.0. I will provide SQL script that should
> take care of that. You just need to run it on all METviewer
databases.
> Let me know if you would like to proceed with the update and I will
> sent files to you.
>
> Tatiana
>
> On Mon Apr 13 15:18:38 2020, john.w.raby2.civ at mail.mil wrote:
> > CLASSIFICATION: UNCLASSIFIED
> >
> > Thanks, John.
> >
> > R/
> > John
> >
> > -----Original Message-----
> > From: John Halley Gotway via RT
> > [Caution-Caution-mailto:met_help at ucar.edu]
> > Sent: Monday, April 13, 2020 3:17 PM
> > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > <john.w.raby2.civ at mail.mil>
> > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > MetViewer
> > v2.11
> > question (UNCLASSIFIED)
> >
> > All active links contained in this email were disabled. Please
> > verify the identity of the sender, and confirm the authenticity of
> > all links contained within the message prior to copying and
pasting
> > the address to a Web browser.
> >
> >
> >
> >
> > ----
> >
> > John,
> >
> > I just reassigned ownership of this ticket from me to Tatiana.
> >
> > Tatiana, please advise John Raby on how he can upgrade to
METviewer
> > 3.0 so he
> > can make use of some of its enhancements.
> >
> > Thanks,
> > John
> >
> > On Mon, Apr 13, 2020 at 2:03 PM Raby, John W USA CIV via RT <
> > met_help at ucar.edu> wrote:
> >
> > >
> > > <Caution-Caution-Caution-url:
> > > Caution-Caution-
> > > Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=94
> > > 902 >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > > John -
> > >
> > > My version is v2.11. What do you recommend as the best way to
> > > upgrade?
> > > Tatiana
> > > worked with us to install the web interface version 2.11 on my
> > > local linux workstation last July.
> > >
> > > R/
> > > John
> > >
> > > -----Original Message-----
> > > From: John Halley Gotway via RT
> > > [Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > Sent: Monday, April 13, 2020 1:51 PM
> > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > <john.w.raby2.civ at mail.mil>
> > > Subject: Re: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
> > > MetViewer
> > > v2.11
> > > question (UNCLASSIFIED)
> > >
> > > All active links contained in this email were disabled. Please
> > > verify the identity of the sender, and confirm the authenticity
of
> > > all links contained within the message prior to copying and
> > > pasting the address to a Web browser.
> > >
> > >
> > >
> > >
> > > ----
> > >
> > > John,
> > >
> > > Can you tell me what version of METviewer you're running? It
> > > should be listed in the top-left corner of the GUI window.
> > > Plotting the TOTAL counts was actually a recent addition in
> > > version 3.0. Here's the GitHub issue which describes that
change:
> > > Caution-Caution-Caution-
> > > Caution-https://github.com/NCAR/METviewer/issues/170
> > >
> > > John
> > >
> > > On Mon, Apr 13, 2020 at 1:47 PM Raby, John W USA CIV via RT <
> > > met_help at ucar.edu> wrote:
> > >
> > > >
> > > > <Caution-Caution-Caution-Caution-url:
> > > > Caution-Caution-
> > > > Caution-Caution-
https://rt.rap.ucar.edu/rt/Ticket/Display.html?i
> > > > d=94
> > > > 902 >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > > Thanks for getting me back on track. I loaded the db
containing
> > > > only .stat files and I looked for "TOTAL" in the list of
> > > > dependent variables but it isn't there.
> > > >
> > > > R/
> > > > John
> > > >
> > > > -----Original Message-----
> > > > From: John Halley Gotway via RT
> > > > [Caution-Caution-Caution-Caution-mailto:met_help at ucar.edu]
> > > > Sent: Monday, April 13, 2020 1:28 PM
> > > > To: Raby, John W CIV USARMY CCDC ARL (USA)
> > > > <john.w.raby2.civ at mail.mil>
> > > > Subject: [Non-DoD Source] Re: [rt.rap.ucar.edu #94902]
MetViewer
> > > > v2.11 question (UNCLASSIFIED)
> > > >
> > > > All active links contained in this email were disabled.
Please
> > > > verify the identity of the sender, and confirm the
authenticity
> > > > of all links contained within the message prior to copying and
> > > > pasting the address to a Web browser.
> > > >
> > > >
> > > >
> > > >
> > > > ----
> > > >
> > > > John,
> > > >
> > > > METviewer only loads files ending in the ".stat" (for output
for
> > > > Point-Stat, Grid-Stat, Ensemble-Stat, and Wavelet-Stat) and
> > > > files ending in "_obj.txt"
> > > > for
> > > > files from MODE and also the files that MTD creates. It does
> > > > NOT load files ending in "_mpr.txt".
> > > >
> > > > To plot the number of matched pairs included in the
computation
> > > > of statistics, I'd recommend plotting the TOTAL column from
the
> > > > SL1L2, CNT, or CNT statistics line type... as you've already
> > > > found.
> > > >
> > > > John
> > > >
> > > > On Mon, Apr 13, 2020 at 12:42 PM Raby, John W USA CIV via RT <
> > > > met_help at ucar.edu> wrote:
> > > >
> > > > >
> > > > > Mon Apr 13 12:42:20 2020: Request 94902 was acted upon.
> > > > > Transaction: Ticket created by john.w.raby2.civ at mail.mil
> > > > > Queue: met_help
> > > > > Subject: MetViewer v2.11 question (UNCLASSIFIED)
> > > > > Owner: Nobody
> > > > > Requestors: john.w.raby2.civ at mail.mil
> > > > > Status: new
> > > > > Ticket <Caution-Caution-Caution-Caution-Caution-url:
> > > > > Caution-Caution-Caution-
> > > > > Caution-Caution-https://rt.rap.ucar.edu/rt/Ticket/Display.
> > > > > html?id=94
> > > > > 902 >
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > > If I want to plot the number of observations (or matched
> > > > > pairs) which were used to compute a given continuous error
> > > > > statistic such as ME do I need to load the MPR.txt files in
> > > > > addition to the .stat files in the database or is there a
way
> > > > > to extract the value
> > > > > (TOTAL) from the .stat files only. I reference the TOTAL
> > > > > values from the Point-Stat CNT.txt file which shows the
total
> > > > > number of matched pairs.
> > > > >
> > > > > I did an experiment by loading in one db, just .stat files
and
> > > > > in another db, I loaded the same .stat files and the MPR.txt
> > > > > files together. In METViewer, when I load the db with no
> > > > > MPR.txt files I do not see the attribute stat "MPR_OBS"
> > > > > available for selection.
> > > > > When I load the db which includes both .stat and MPR.txt
> > > > > files, I do see the attribute stat "MPR_OBS". When I plot
this
> > > > > stat, I see what appears to be a number count which, I
> > > > > believe, is the number of matched pairs or "TOTAL"
> > > > >
> > > > > R/
> > > > > John
> > > > >
> > > > > Mr. John W. Raby
> > > > > U.S. Army Research Laboratory
> > > > > White Sands Missile Range, NM 88002
> > > > > Office:(575) 678-2004 DSN 258-2004
> > > > > Teleworking: Contact Admin Specialist at (410) 278-6974 FAX
> > > > > (575)
> > > > > 678-1230 DSN 258-1230
> > > > > Email: john.w.raby2.civ at mail.mil
> > > > >
> > > > >
> > > > > CLASSIFICATION: UNCLASSIFIED
> > > > >
> > > > >
> > > >
> > > > CLASSIFICATION: UNCLASSIFIED
> > > >
> > > >
> > >
> > > CLASSIFICATION: UNCLASSIFIED
> > >
> > >
> >
> > CLASSIFICATION: UNCLASSIFIED
>
>
>
> CLASSIFICATION: UNCLASSIFIED
CLASSIFICATION: UNCLASSIFIED
------------------------------------------------
More information about the Met_help
mailing list