[Met_help] [rt.rap.ucar.edu #77884] History for ask about tutorial MET
Julie Prestopnik via RT
met_help at ucar.edu
Tue Sep 20 14:16:28 MDT 2016
----------------------------------------------------------------
Initial Request
----------------------------------------------------------------
Hi,
I am following MET online tutorial, I want ask when I can download sample
data was used on tutorial online, like
*data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
etc.?*
--
Novvria Sagita/Mr
Indonesian Agency for Meteorology, Climatology and Geophysics
Sam Ratulangi Meteorological officer
Phone: (0431)811202
A.A. Maramis Street , Manado
North Sulawesi, 95374
Indonesia
----------------------------------------------------------------
Complete Ticket History
----------------------------------------------------------------
Subject: ask about tutorial MET
From: Julie Prestopnik
Time: Tue Sep 13 09:14:58 2016
Hello. The sample data used in the online tutorial is included in the
MET
distribution. You can access it from the following link:
http://www.dtcenter.org/met/users/downloads/index.php
At the top of that page, you will see:
MET Software
To begin downloading MET, enter your e-mail address:
where you need to enter your email address and then hit "enter".
That will bring you to a page where you can select METv5.2 with
patches:
*MET Version 5.2 + Patches:* met-5.2_bugfix.tar.gz
<http://www.dtcenter.org/met/users/downloads/MET_releases/met-
5.2_bugfix.20160902.tar.gz>
You can click on the link to download it. Once you have it, you can
open
it with:
tar -zxf met-5.2_bugfix.20160902.tar.gz
and then you will be able to see the data you refer to, for example:
jpresto% *ls met-
5.2_bugfix/data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212 *
met-5.2_bugfix/data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
I hope that helps! Please let us know if you have any other
questions.
Thanks,
Julie
On Tue, Sep 13, 2016 at 8:27 AM, NOVVRIA SAGITA via RT
<met_help at ucar.edu>
wrote:
>
> Tue Sep 13 08:27:16 2016: Request 77884 was acted upon.
> Transaction: Ticket created by novvria.sagita.ut at gmail.com
> Queue: met_help
> Subject: ask about tutorial MET
> Owner: Nobody
> Requestors: novvria.sagita.ut at gmail.com
> Status: new
> Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=77884 >
>
>
> Hi,
>
> I am following MET online tutorial, I want ask when I can download
sample
> data was used on tutorial online, like
> *data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
> etc.?*
>
>
>
> --
> Novvria Sagita/Mr
>
> Indonesian Agency for Meteorology, Climatology and Geophysics
>
> Sam Ratulangi Meteorological officer
> Phone: (0431)811202
> A.A. Maramis Street , Manado
> North Sulawesi, 95374
> Indonesia
>
>
--
Julie Prestopnik
National Center for Atmospheric Research
Research Applications Laboratory
Phone: 303.497.8399
Email: jpresto at ucar.edu
------------------------------------------------
Subject: ask about tutorial MET
From: NOVVRIA SAGITA
Time: Tue Sep 13 16:36:54 2016
Ok, one question again. If i have GSMAP (resolution 10km) satellite
data
and i want to compare with WRF(resolution 9km). Can i use MET to
regridding
gsmap data for appropriate with resolution WRF output? What is tool
must be
used in MET?
On Sep 13, 2016 10:15 PM, "Julie Prestopnik via RT"
<met_help at ucar.edu>
wrote:
> Hello. The sample data used in the online tutorial is included in
the MET
> distribution. You can access it from the following link:
>
> http://www.dtcenter.org/met/users/downloads/index.php
>
> At the top of that page, you will see:
> MET Software
>
> To begin downloading MET, enter your e-mail address:
>
> where you need to enter your email address and then hit "enter".
>
> That will bring you to a page where you can select METv5.2 with
patches:
>
> *MET Version 5.2 + Patches:* met-5.2_bugfix.tar.gz
> <http://www.dtcenter.org/met/users/downloads/MET_releases/
> met-5.2_bugfix.20160902.tar.gz>
>
> You can click on the link to download it. Once you have it, you can
open
> it with:
>
> tar -zxf met-5.2_bugfix.20160902.tar.gz
>
> and then you will be able to see the data you refer to, for example:
>
> jpresto% *ls met-
5.2_bugfix/data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
> *
>
> met-5.2_bugfix/data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
>
> I hope that helps! Please let us know if you have any other
questions.
>
> Thanks,
> Julie
>
>
>
> On Tue, Sep 13, 2016 at 8:27 AM, NOVVRIA SAGITA via RT
<met_help at ucar.edu>
> wrote:
>
> >
> > Tue Sep 13 08:27:16 2016: Request 77884 was acted upon.
> > Transaction: Ticket created by novvria.sagita.ut at gmail.com
> > Queue: met_help
> > Subject: ask about tutorial MET
> > Owner: Nobody
> > Requestors: novvria.sagita.ut at gmail.com
> > Status: new
> > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=77884 >
> >
> >
> > Hi,
> >
> > I am following MET online tutorial, I want ask when I can download
sample
> > data was used on tutorial online, like
> > *data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
> > etc.?*
> >
> >
> >
> > --
> > Novvria Sagita/Mr
> >
> > Indonesian Agency for Meteorology, Climatology and Geophysics
> >
> > Sam Ratulangi Meteorological officer
> > Phone: (0431)811202
> > A.A. Maramis Street , Manado
> > North Sulawesi, 95374
> > Indonesia
> >
> >
>
>
> --
> Julie Prestopnik
> National Center for Atmospheric Research
> Research Applications Laboratory
> Phone: 303.497.8399
> Email: jpresto at ucar.edu
>
>
------------------------------------------------
Subject: ask about tutorial MET
From: Julie Prestopnik
Time: Wed Sep 14 10:04:38 2016
First, I should mention that unfortunately, MET doesn't read the
output of
WRF directly. There are two options for post processing WRF output so
that
MET can read it:
- Post-process using the Unified PostProcessor which creates GRIB
output
files.
- Post-process using the wrf_interp utility which writes a NetCDF
file
that MET reads.
The downside to wrf_interp is that it does not actually destagger the
grid
and doesn't derive any additional output fields. Practically speaking
that
means you're limited to the raw WRF output variables, and MET can't
read
winds which use the staggered dimension.
With regard to regridding the data, you can either put them on a
common
grid using regrid_data_plane or, more conveniently, just use the
"regrid"
section of the config file and let MET do the regridding on the fly.
I hope that helps. Please let us know if you have any other
questions.
Thanks,
Julie
On Tue, Sep 13, 2016 at 4:36 PM, NOVVRIA SAGITA via RT
<met_help at ucar.edu>
wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=77884 >
>
> Ok, one question again. If i have GSMAP (resolution 10km) satellite
data
> and i want to compare with WRF(resolution 9km). Can i use MET to
regridding
> gsmap data for appropriate with resolution WRF output? What is tool
must be
> used in MET?
>
> On Sep 13, 2016 10:15 PM, "Julie Prestopnik via RT"
<met_help at ucar.edu>
> wrote:
>
> > Hello. The sample data used in the online tutorial is included in
the
> MET
> > distribution. You can access it from the following link:
> >
> > http://www.dtcenter.org/met/users/downloads/index.php
> >
> > At the top of that page, you will see:
> > MET Software
> >
> > To begin downloading MET, enter your e-mail address:
> >
> > where you need to enter your email address and then hit "enter".
> >
> > That will bring you to a page where you can select METv5.2 with
patches:
> >
> > *MET Version 5.2 + Patches:* met-5.2_bugfix.tar.gz
> > <http://www.dtcenter.org/met/users/downloads/MET_releases/
> > met-5.2_bugfix.20160902.tar.gz>
> >
> > You can click on the link to download it. Once you have it, you
can open
> > it with:
> >
> > tar -zxf met-5.2_bugfix.20160902.tar.gz
> >
> > and then you will be able to see the data you refer to, for
example:
> >
> > jpresto% *ls met-
5.2_bugfix/data/sample_obs/ST2ml/ST2ml2005080700.Grb_
> G212
> > *
> >
> > met-5.2_bugfix/data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
> >
> > I hope that helps! Please let us know if you have any other
questions.
> >
> > Thanks,
> > Julie
> >
> >
> >
> > On Tue, Sep 13, 2016 at 8:27 AM, NOVVRIA SAGITA via RT <
> met_help at ucar.edu>
> > wrote:
> >
> > >
> > > Tue Sep 13 08:27:16 2016: Request 77884 was acted upon.
> > > Transaction: Ticket created by novvria.sagita.ut at gmail.com
> > > Queue: met_help
> > > Subject: ask about tutorial MET
> > > Owner: Nobody
> > > Requestors: novvria.sagita.ut at gmail.com
> > > Status: new
> > > Ticket <URL:
https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=77884
> >
> > >
> > >
> > > Hi,
> > >
> > > I am following MET online tutorial, I want ask when I can
download
> sample
> > > data was used on tutorial online, like
> > > *data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
> > > etc.?*
> > >
> > >
> > >
> > > --
> > > Novvria Sagita/Mr
> > >
> > > Indonesian Agency for Meteorology, Climatology and Geophysics
> > >
> > > Sam Ratulangi Meteorological officer
> > > Phone: (0431)811202
> > > A.A. Maramis Street , Manado
> > > North Sulawesi, 95374
> > > Indonesia
> > >
> > >
> >
> >
> > --
> > Julie Prestopnik
> > National Center for Atmospheric Research
> > Research Applications Laboratory
> > Phone: 303.497.8399
> > Email: jpresto at ucar.edu
> >
> >
>
>
--
Julie Prestopnik
National Center for Atmospheric Research
Research Applications Laboratory
Phone: 303.497.8399
Email: jpresto at ucar.edu
------------------------------------------------
Subject: ask about tutorial MET
From: NOVVRIA SAGITA
Time: Wed Sep 14 19:28:24 2016
Ok thank you
On Sep 14, 2016 11:10 PM, "Julie Prestopnik via RT"
<met_help at ucar.edu>
wrote:
> First, I should mention that unfortunately, MET doesn't read the
output of
> WRF directly. There are two options for post processing WRF output
so that
> MET can read it:
>
> - Post-process using the Unified PostProcessor which creates GRIB
output
> files.
> - Post-process using the wrf_interp utility which writes a NetCDF
file
> that MET reads.
>
> The downside to wrf_interp is that it does not actually destagger
the grid
> and doesn't derive any additional output fields. Practically
speaking that
> means you're limited to the raw WRF output variables, and MET can't
read
> winds which use the staggered dimension.
>
> With regard to regridding the data, you can either put them on a
common
> grid using regrid_data_plane or, more conveniently, just use the
"regrid"
> section of the config file and let MET do the regridding on the fly.
>
> I hope that helps. Please let us know if you have any other
questions.
>
> Thanks,
> Julie
>
> On Tue, Sep 13, 2016 at 4:36 PM, NOVVRIA SAGITA via RT
<met_help at ucar.edu>
> wrote:
>
> >
> > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=77884 >
> >
> > Ok, one question again. If i have GSMAP (resolution 10km)
satellite data
> > and i want to compare with WRF(resolution 9km). Can i use MET to
> regridding
> > gsmap data for appropriate with resolution WRF output? What is
tool must
> be
> > used in MET?
> >
> > On Sep 13, 2016 10:15 PM, "Julie Prestopnik via RT"
<met_help at ucar.edu>
> > wrote:
> >
> > > Hello. The sample data used in the online tutorial is included
in the
> > MET
> > > distribution. You can access it from the following link:
> > >
> > > http://www.dtcenter.org/met/users/downloads/index.php
> > >
> > > At the top of that page, you will see:
> > > MET Software
> > >
> > > To begin downloading MET, enter your e-mail address:
> > >
> > > where you need to enter your email address and then hit "enter".
> > >
> > > That will bring you to a page where you can select METv5.2 with
> patches:
> > >
> > > *MET Version 5.2 + Patches:* met-5.2_bugfix.tar.gz
> > > <http://www.dtcenter.org/met/users/downloads/MET_releases/
> > > met-5.2_bugfix.20160902.tar.gz>
> > >
> > > You can click on the link to download it. Once you have it, you
can
> open
> > > it with:
> > >
> > > tar -zxf met-5.2_bugfix.20160902.tar.gz
> > >
> > > and then you will be able to see the data you refer to, for
example:
> > >
> > > jpresto% *ls met-
5.2_bugfix/data/sample_obs/ST2ml/ST2ml2005080700.Grb_
> > G212
> > > *
> > >
> > > met-5.2_bugfix/data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
> > >
> > > I hope that helps! Please let us know if you have any other
questions.
> > >
> > > Thanks,
> > > Julie
> > >
> > >
> > >
> > > On Tue, Sep 13, 2016 at 8:27 AM, NOVVRIA SAGITA via RT <
> > met_help at ucar.edu>
> > > wrote:
> > >
> > > >
> > > > Tue Sep 13 08:27:16 2016: Request 77884 was acted upon.
> > > > Transaction: Ticket created by novvria.sagita.ut at gmail.com
> > > > Queue: met_help
> > > > Subject: ask about tutorial MET
> > > > Owner: Nobody
> > > > Requestors: novvria.sagita.ut at gmail.com
> > > > Status: new
> > > > Ticket <URL: https://rt.rap.ucar.edu/rt/
> Ticket/Display.html?id=77884
> > >
> > > >
> > > >
> > > > Hi,
> > > >
> > > > I am following MET online tutorial, I want ask when I can
download
> > sample
> > > > data was used on tutorial online, like
> > > > *data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
> > > > etc.?*
> > > >
> > > >
> > > >
> > > > --
> > > > Novvria Sagita/Mr
> > > >
> > > > Indonesian Agency for Meteorology, Climatology and Geophysics
> > > >
> > > > Sam Ratulangi Meteorological officer
> > > > Phone: (0431)811202
> > > > A.A. Maramis Street , Manado
> > > > North Sulawesi, 95374
> > > > Indonesia
> > > >
> > > >
> > >
> > >
> > > --
> > > Julie Prestopnik
> > > National Center for Atmospheric Research
> > > Research Applications Laboratory
> > > Phone: 303.497.8399
> > > Email: jpresto at ucar.edu
> > >
> > >
> >
> >
>
>
> --
> Julie Prestopnik
> National Center for Atmospheric Research
> Research Applications Laboratory
> Phone: 303.497.8399
> Email: jpresto at ucar.edu
>
>
------------------------------------------------
Subject: ask about tutorial MET
From: Julie Prestopnik
Time: Thu Sep 15 08:27:00 2016
I'll go ahead and close this ticket. Please let us know if you have
any
other questions.
Thanks,
Julie
On Wed, Sep 14, 2016 at 7:28 PM, NOVVRIA SAGITA via RT
<met_help at ucar.edu>
wrote:
>
> <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=77884 >
>
> Ok thank you
>
> On Sep 14, 2016 11:10 PM, "Julie Prestopnik via RT"
<met_help at ucar.edu>
> wrote:
>
> > First, I should mention that unfortunately, MET doesn't read the
output
> of
> > WRF directly. There are two options for post processing WRF output
so
> that
> > MET can read it:
> >
> > - Post-process using the Unified PostProcessor which creates GRIB
output
> > files.
> > - Post-process using the wrf_interp utility which writes a NetCDF
file
> > that MET reads.
> >
> > The downside to wrf_interp is that it does not actually destagger
the
> grid
> > and doesn't derive any additional output fields. Practically
speaking
> that
> > means you're limited to the raw WRF output variables, and MET
can't read
> > winds which use the staggered dimension.
> >
> > With regard to regridding the data, you can either put them on a
common
> > grid using regrid_data_plane or, more conveniently, just use the
"regrid"
> > section of the config file and let MET do the regridding on the
fly.
> >
> > I hope that helps. Please let us know if you have any other
questions.
> >
> > Thanks,
> > Julie
> >
> > On Tue, Sep 13, 2016 at 4:36 PM, NOVVRIA SAGITA via RT <
> met_help at ucar.edu>
> > wrote:
> >
> > >
> > > <URL: https://rt.rap.ucar.edu/rt/Ticket/Display.html?id=77884 >
> > >
> > > Ok, one question again. If i have GSMAP (resolution 10km)
satellite
> data
> > > and i want to compare with WRF(resolution 9km). Can i use MET to
> > regridding
> > > gsmap data for appropriate with resolution WRF output? What is
tool
> must
> > be
> > > used in MET?
> > >
> > > On Sep 13, 2016 10:15 PM, "Julie Prestopnik via RT"
<met_help at ucar.edu
> >
> > > wrote:
> > >
> > > > Hello. The sample data used in the online tutorial is
included in
> the
> > > MET
> > > > distribution. You can access it from the following link:
> > > >
> > > > http://www.dtcenter.org/met/users/downloads/index.php
> > > >
> > > > At the top of that page, you will see:
> > > > MET Software
> > > >
> > > > To begin downloading MET, enter your e-mail address:
> > > >
> > > > where you need to enter your email address and then hit
"enter".
> > > >
> > > > That will bring you to a page where you can select METv5.2
with
> > patches:
> > > >
> > > > *MET Version 5.2 + Patches:* met-5.2_bugfix.tar.gz
> > > > <http://www.dtcenter.org/met/users/downloads/MET_releases/
> > > > met-5.2_bugfix.20160902.tar.gz>
> > > >
> > > > You can click on the link to download it. Once you have it,
you can
> > open
> > > > it with:
> > > >
> > > > tar -zxf met-5.2_bugfix.20160902.tar.gz
> > > >
> > > > and then you will be able to see the data you refer to, for
example:
> > > >
> > > > jpresto% *ls met-5.2_bugfix/data/sample_
> obs/ST2ml/ST2ml2005080700.Grb_
> > > G212
> > > > *
> > > >
> > > > met-5.2_bugfix/data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
> > > >
> > > > I hope that helps! Please let us know if you have any other
> questions.
> > > >
> > > > Thanks,
> > > > Julie
> > > >
> > > >
> > > >
> > > > On Tue, Sep 13, 2016 at 8:27 AM, NOVVRIA SAGITA via RT <
> > > met_help at ucar.edu>
> > > > wrote:
> > > >
> > > > >
> > > > > Tue Sep 13 08:27:16 2016: Request 77884 was acted upon.
> > > > > Transaction: Ticket created by novvria.sagita.ut at gmail.com
> > > > > Queue: met_help
> > > > > Subject: ask about tutorial MET
> > > > > Owner: Nobody
> > > > > Requestors: novvria.sagita.ut at gmail.com
> > > > > Status: new
> > > > > Ticket <URL: https://rt.rap.ucar.edu/rt/
> > Ticket/Display.html?id=77884
> > > >
> > > > >
> > > > >
> > > > > Hi,
> > > > >
> > > > > I am following MET online tutorial, I want ask when I can
download
> > > sample
> > > > > data was used on tutorial online, like
> > > > > *data/sample_obs/ST2ml/ST2ml2005080700.Grb_G212
> > > > > etc.?*
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Novvria Sagita/Mr
> > > > >
> > > > > Indonesian Agency for Meteorology, Climatology and
Geophysics
> > > > >
> > > > > Sam Ratulangi Meteorological officer
> > > > > Phone: (0431)811202
> > > > > A.A. Maramis Street , Manado
> > > > > North Sulawesi, 95374
> > > > > Indonesia
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > Julie Prestopnik
> > > > National Center for Atmospheric Research
> > > > Research Applications Laboratory
> > > > Phone: 303.497.8399
> > > > Email: jpresto at ucar.edu
> > > >
> > > >
> > >
> > >
> >
> >
> > --
> > Julie Prestopnik
> > National Center for Atmospheric Research
> > Research Applications Laboratory
> > Phone: 303.497.8399
> > Email: jpresto at ucar.edu
> >
> >
>
>
--
Julie Prestopnik
National Center for Atmospheric Research
Research Applications Laboratory
Phone: 303.497.8399
Email: jpresto at ucar.edu
------------------------------------------------
More information about the Met_help
mailing list