[Dart-dev] [3742] DART/trunk/obs_def:
renamed obs_def_MITgcm_ocean_mod to obs_def_ocean_mod since there was
nothing particular to the MITgcm_ocean model
nancy at ucar.edu
nancy at ucar.edu
Fri Jan 16 10:55:51 MST 2009
An HTML attachment was scrubbed...
URL: http://mailman.ucar.edu/pipermail/dart-dev/attachments/20090116/bdc77f85/attachment-0001.html
-------------- next part --------------
Deleted: DART/trunk/obs_def/obs_def_MITgcm_ocean_mod.f90
===================================================================
--- DART/trunk/obs_def/obs_def_MITgcm_ocean_mod.f90 2009-01-16 17:53:05 UTC (rev 3741)
+++ DART/trunk/obs_def/obs_def_MITgcm_ocean_mod.f90 2009-01-16 17:55:51 UTC (rev 3742)
@@ -1,45 +0,0 @@
-! Data Assimilation Research Testbed -- DART
-! Copyright 2004-2007, Data Assimilation Research Section
-! University Corporation for Atmospheric Research
-! Licensed under the GPL -- www.gpl.org/licenses/gpl.html
-
-! BEGIN DART PREPROCESS KIND LIST
-!SALINITY, KIND_SALINITY, COMMON_CODE
-!TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!SEA_SURFACE_HEIGHT, KIND_SEA_SURFACE_HEIGHT, COMMON_CODE
-!ARGO_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!ARGO_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!ARGO_SALINITY, KIND_SALINITY, COMMON_CODE
-!ARGO_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!ADCP_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!ADCP_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!ADCP_SALINITY, KIND_SALINITY, COMMON_CODE
-!ADCP_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!FLOAT_SALINITY, KIND_SALINITY, COMMON_CODE
-!FLOAT_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!DRIFTER_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!DRIFTER_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!DRIFTER_SALINITY, KIND_SALINITY, COMMON_CODE
-!DRIFTER_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!GLIDER_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!GLIDER_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!GLIDER_SALINITY, KIND_SALINITY, COMMON_CODE
-!GLIDER_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!MOORING_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!MOORING_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!MOORING_SALINITY, KIND_SALINITY, COMMON_CODE
-!MOORING_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!SATELLITE_MICROWAVE_SST, KIND_TEMPERATURE, COMMON_CODE
-!SATELLITE_INFRARED_SST, KIND_TEMPERATURE, COMMON_CODE
-!SATELLITE_SSH, KIND_SEA_SURFACE_HEIGHT, COMMON_CODE
-!SATELLITE_SSS, KIND_SALINITY, COMMON_CODE
-! END DART PREPROCESS KIND LIST
-
-! <next few lines under version control, do not edit>
-! $URL$
-! $Id$
-! $Revision$
-! $Date$
-
Deleted: DART/trunk/obs_def/obs_def_MITgcm_ocean_mod.html
===================================================================
--- DART/trunk/obs_def/obs_def_MITgcm_ocean_mod.html 2009-01-16 17:53:05 UTC (rev 3741)
+++ DART/trunk/obs_def/obs_def_MITgcm_ocean_mod.html 2009-01-16 17:55:51 UTC (rev 3742)
@@ -1,239 +0,0 @@
-<HTML>
-<HEAD>
-<TITLE>module obs_def_MITgcm_ocean_mod</TITLE>
-<link rel="stylesheet" type="text/css" href="../doc/html/doc.css"></link>
-</HEAD>
-<BODY>
-<!--
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-!! !!
-!! GNU General Public License !!
-!! !!
-!! This file is part of the Data Assimilation Research Testbed (DART). !!
-!! !!
-!! DART is free software; you can redistribute it and/or modify !!
-!! it and are expected to follow the terms of the GNU General Public !!
-!! License as published by the Free Software Foundation. !!
-!! !!
-!! DART is distributed in the hope that it will be useful, !!
-!! but WITHOUT ANY WARRANTY; without even the implied warranty of !!
-!! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !!
-!! GNU General Public License for more details. !!
-!! !!
-!! You should have received a copy of the GNU General Public License !!
-!! along with DART; if not, write to: !!
-!! Free Software Foundation, Inc. !!
-!! 59 Temple Place, Suite 330 !!
-!! Boston, MA 02111-1307 USA !!
-!! or see: !!
-!! http://www.gnu.org/licenses/gpl.txt !!
-!! !!
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
--->
-
-<DIV ALIGN=CENTER>
-<A HREF="#Interface">INTERFACE</A> /
-<A HREF="#PublicEntities">PUBLIC COMPONENTS</A> /
-<A HREF="#Namelist">NAMELIST</A> /
-<A HREF="#FilesUsed">FILES</A> /
-<A HREF="#References">REFERENCES</A> /
-<A HREF="#Errors">ERRORS</A> /
-<A HREF="#KnownBugs">BUGS</A> /
-<A HREF="#FuturePlans">PLANS</A> /
-</DIV>
-
-<!--==================================================================-->
-
-<H1>MODULE obs_def_MITgcm_ocean_mod</H1>
-<A NAME="HEADER"></A>
-<TABLE summary="">
-<TR><TD>Contact: </TD><TD> Tim Hoar </TD></TR>
-<TR><TD>Revision: </TD><TD> $Revision$ </TD></TR>
-<TR><TD>Source: </TD><TD> $URL$ </TD></TR>
-<TR><TD>Change Date: </TD><TD> $Date$ </TD></TR>
-<TR><TD>Change history:</TD><TD> try "svn log" or "svn diff" </TD></TR>
-</TABLE>
-
-<!--==================================================================-->
-
-<A NAME="OVERVIEW"></A>
-<HR>
-<H2>OVERVIEW</H2>
-<P class="indent1">
-DART includes a flexible, powerful, and (unfortunately) complicated mechanism
-for incorporating new types of observations. The
-<em class="file">obs_def_MITgcm_ocean_mod</em> module
-being described here is used by the program
-<em class="unix">preprocess</em>
-to insert appropriate definitions of ocean observations into the
-<em class="file">DEFAULT_obs_def_mod.f90</em> template and
-generate the source files
-<em class="file">obs_def_mod.f90</em> and
-<em class="file">obs_kind_mod.f90</em>
-that are used by
-<em class="unix">filter</em> and other DART programs.
-<br><br>
-There are no code segments in this module, only definitions of observation types
-that map specific observation types to generic observation kinds. DART contains
-logic that supports a limited inheritance of attributes. If you need to interpolate
-observations of 'FLOAT_TEMPERATURE', DART will check to see if a specific routine
-is provided for that type, if none exists, the interpolation routine for the
-generic 'KIND_TEMPERATURE' will be used; that way one interpolation routine may
-support many observation types.
-<BR><BR>
-The mandatory header line is followed by lines
-that have the observation type name (an all caps Fortran 90 identifier) and
-their associated generic kind identifier from the obs_kind module.
-If there is no special processing needed for an observation type,
-and no additional data needed beyond the standard contents of an observation,
-then a third word on the line, the <em class="unix">COMMON_CODE</em> will
-instruct the preprocess program to automatically generate all stubs and
-code needed for this type. For observation types needing any special code
-or additional data, this word should not be specified and the user must
-supply the code manually. One of the future extensions of this module will
-be to support acoustic tomographic observations, which will
-necessitate specific support routines.
-</P>
-<H3 class="indent1">ocean variable types and their corresponding kinds</H3>
-<pre class="indent1">
-! BEGIN DART PREPROCESS KIND LIST
-!SALINITY, KIND_SALINITY, COMMON_CODE
-!TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!SEA_SURFACE_HEIGHT, KIND_SEA_SURFACE_HEIGHT, COMMON_CODE
-!ARGO_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!ARGO_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!ARGO_SALINITY, KIND_SALINITY, COMMON_CODE
-!ARGO_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!ADCP_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!ADCP_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!ADCP_SALINITY, KIND_SALINITY, COMMON_CODE
-!ADCP_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!FLOAT_SALINITY, KIND_SALINITY, COMMON_CODE
-!FLOAT_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!DRIFTER_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!DRIFTER_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!DRIFTER_SALINITY, KIND_SALINITY, COMMON_CODE
-!DRIFTER_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!GLIDER_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!GLIDER_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!GLIDER_SALINITY, KIND_SALINITY, COMMON_CODE
-!GLIDER_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!MOORING_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
-!MOORING_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
-!MOORING_SALINITY, KIND_SALINITY, COMMON_CODE
-!MOORING_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
-!SATELLITE_MICROWAVE_SST, KIND_TEMPERATURE, COMMON_CODE
-!SATELLITE_INFRARED_SST, KIND_TEMPERATURE, COMMON_CODE
-!SATELLITE_SSH, KIND_SEA_SURFACE_HEIGHT, COMMON_CODE
-!SATELLITE_SSS, KIND_SALINITY, COMMON_CODE
-! END DART PREPROCESS KIND LIST
-</pre>
-<P class="indent1">
-New observation types may be added to this list with no loss of generality.
-Supporting the observations and actually <strong>assimilating</strong> them
-are somewhat different and is controlled by the
-<em class="file">input.nml</em><em class="unix">&obs_kind_nml</em>
-<a href="../obs_kind/obs_kind_mod.html#Namelist">assimilate_these_obs_types</a>
-variable. This provides the flexibility to have an observation sequence file
-containing many different observation types and being able to selectively
-choose what types will be assimilated.
-</P>
-
-<!--==================================================================-->
-
-<A NAME="OTHER MODULES USED"></A>
-<BR><HR>
-<H2>OTHER MODULES USED</H2>
-<P class="indent1">
-none
-</P>
-
-<!--==================================================================-->
-<!--Note to authors. The first row of the table is different. -->
-
-<A NAME="Interface"></A>
-<BR><HR>
-<H2>PUBLIC INTERFACE</H2>
-<P class="indent1">
-none
-</P>
-
-<!--==================================================================-->
-<!-- Declare all public entities ... -->
-<!-- duplicate public routines template as many times as necessary -->
-<!-- make sure you replace all yyyroutine?? strings -->
-<!--==================================================================-->
-
-<A NAME="PublicEntities"></A>
-<BR><HR>
-<H2>PUBLIC COMPONENTS</H2>
-<P class="indent1">
-none
-</P>
-
-<!--==================================================================-->
-<!-- Describe the Files Used by this module. -->
-<!--==================================================================-->
-</P>
-<A NAME="FilesUsed"></A>
-<BR><HR>
-<H2>FILES</H2>
-<P class="indent1">
-none
-</P>
-
-<!--==================================================================-->
-<!-- Cite references, if need be. -->
-<!--==================================================================-->
-
-<A NAME="References"></A>
-<BR><HR>
-<H2>REFERENCES</H2>
-<P class="indent1">
-none
-</P>
-
-<!--==================================================================-->
-<!-- Describe all the error conditions and codes. -->
-<!-- Putting a <BR> after the synopsis creates a nice effect. -->
-<!--==================================================================-->
-
-<A NAME="Errors"></A>
-<HR>
-<H2>ERROR CODES and CONDITIONS</H2>
-<P class="indent1">
-none
-</P>
-
-<!--==================================================================-->
-<!-- Describe the bugs. -->
-<!--==================================================================-->
-
-<A NAME="KnownBugs"></A>
-<BR><HR>
-<H2>KNOWN BUGS</H2>
-<P class="indent1">
-none
-</P>
-
-<!--==================================================================-->
-<!-- Describe Future Plans. -->
-<!--==================================================================-->
-
-<A NAME="FuturePlans"></A>
-<BR><HR>
-<H2>FUTURE PLANS</H2>
-<UL class="indent1">
-<LI>support acoustic tomography observations - similar to GPS soundings
-in the atmosphere.
-Take a look at <a href="obs_def_gps_mod.f90">obs_def_gps_mod.f90</a></li>
-</UL>
-
-<!--==================================================================-->
-
-<BR><HR>
-
-</BODY>
-</HTML>
Copied: DART/trunk/obs_def/obs_def_ocean_mod.f90 (from rev 3723, DART/trunk/obs_def/obs_def_MITgcm_ocean_mod.f90)
===================================================================
--- DART/trunk/obs_def/obs_def_ocean_mod.f90 (rev 0)
+++ DART/trunk/obs_def/obs_def_ocean_mod.f90 2009-01-16 17:55:51 UTC (rev 3742)
@@ -0,0 +1,45 @@
+! Data Assimilation Research Testbed -- DART
+! Copyright 2004-2007, Data Assimilation Research Section
+! University Corporation for Atmospheric Research
+! Licensed under the GPL -- www.gpl.org/licenses/gpl.html
+
+! BEGIN DART PREPROCESS KIND LIST
+!SALINITY, KIND_SALINITY, COMMON_CODE
+!TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!SEA_SURFACE_HEIGHT, KIND_SEA_SURFACE_HEIGHT, COMMON_CODE
+!ARGO_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!ARGO_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!ARGO_SALINITY, KIND_SALINITY, COMMON_CODE
+!ARGO_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!ADCP_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!ADCP_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!ADCP_SALINITY, KIND_SALINITY, COMMON_CODE
+!ADCP_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!FLOAT_SALINITY, KIND_SALINITY, COMMON_CODE
+!FLOAT_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!DRIFTER_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!DRIFTER_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!DRIFTER_SALINITY, KIND_SALINITY, COMMON_CODE
+!DRIFTER_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!GLIDER_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!GLIDER_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!GLIDER_SALINITY, KIND_SALINITY, COMMON_CODE
+!GLIDER_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!MOORING_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!MOORING_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!MOORING_SALINITY, KIND_SALINITY, COMMON_CODE
+!MOORING_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!SATELLITE_MICROWAVE_SST, KIND_TEMPERATURE, COMMON_CODE
+!SATELLITE_INFRARED_SST, KIND_TEMPERATURE, COMMON_CODE
+!SATELLITE_SSH, KIND_SEA_SURFACE_HEIGHT, COMMON_CODE
+!SATELLITE_SSS, KIND_SALINITY, COMMON_CODE
+! END DART PREPROCESS KIND LIST
+
+! <next few lines under version control, do not edit>
+! $URL$
+! $Id$
+! $Revision$
+! $Date$
+
Copied: DART/trunk/obs_def/obs_def_ocean_mod.html (from rev 3723, DART/trunk/obs_def/obs_def_MITgcm_ocean_mod.html)
===================================================================
--- DART/trunk/obs_def/obs_def_ocean_mod.html (rev 0)
+++ DART/trunk/obs_def/obs_def_ocean_mod.html 2009-01-16 17:55:51 UTC (rev 3742)
@@ -0,0 +1,239 @@
+<HTML>
+<HEAD>
+<TITLE>module obs_def_gcm_ocean_mod</TITLE>
+<link rel="stylesheet" type="text/css" href="../doc/html/doc.css"></link>
+</HEAD>
+<BODY>
+<!--
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!! !!
+!! GNU General Public License !!
+!! !!
+!! This file is part of the Data Assimilation Research Testbed (DART). !!
+!! !!
+!! DART is free software; you can redistribute it and/or modify !!
+!! it and are expected to follow the terms of the GNU General Public !!
+!! License as published by the Free Software Foundation. !!
+!! !!
+!! DART is distributed in the hope that it will be useful, !!
+!! but WITHOUT ANY WARRANTY; without even the implied warranty of !!
+!! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !!
+!! GNU General Public License for more details. !!
+!! !!
+!! You should have received a copy of the GNU General Public License !!
+!! along with DART; if not, write to: !!
+!! Free Software Foundation, Inc. !!
+!! 59 Temple Place, Suite 330 !!
+!! Boston, MA 02111-1307 USA !!
+!! or see: !!
+!! http://www.gnu.org/licenses/gpl.txt !!
+!! !!
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+-->
+
+<DIV ALIGN=CENTER>
+<A HREF="#Interface">INTERFACE</A> /
+<A HREF="#PublicEntities">PUBLIC COMPONENTS</A> /
+<A HREF="#Namelist">NAMELIST</A> /
+<A HREF="#FilesUsed">FILES</A> /
+<A HREF="#References">REFERENCES</A> /
+<A HREF="#Errors">ERRORS</A> /
+<A HREF="#KnownBugs">BUGS</A> /
+<A HREF="#FuturePlans">PLANS</A> /
+</DIV>
+
+<!--==================================================================-->
+
+<H1>MODULE obs_def_gcm_ocean_mod</H1>
+<A NAME="HEADER"></A>
+<TABLE summary="">
+<TR><TD>Contact: </TD><TD> Tim Hoar </TD></TR>
+<TR><TD>Revision: </TD><TD> $Revision$ </TD></TR>
+<TR><TD>Source: </TD><TD> $URL$ </TD></TR>
+<TR><TD>Change Date: </TD><TD> $Date$ </TD></TR>
+<TR><TD>Change history:</TD><TD> try "svn log" or "svn diff" </TD></TR>
+</TABLE>
+
+<!--==================================================================-->
+
+<A NAME="OVERVIEW"></A>
+<HR>
+<H2>OVERVIEW</H2>
+<P class="indent1">
+DART includes a flexible, powerful, and (unfortunately) complicated mechanism
+for incorporating new types of observations. The
+<em class="file">obs_def_gcm_ocean_mod</em> module
+being described here is used by the program
+<em class="unix">preprocess</em>
+to insert appropriate definitions of ocean observations into the
+<em class="file">DEFAULT_obs_def_mod.f90</em> template and
+generate the source files
+<em class="file">obs_def_mod.f90</em> and
+<em class="file">obs_kind_mod.f90</em>
+that are used by
+<em class="unix">filter</em> and other DART programs.
+<br><br>
+There are no code segments in this module, only definitions of observation types
+that map specific observation types to generic observation kinds. DART contains
+logic that supports a limited inheritance of attributes. If you need to interpolate
+observations of 'FLOAT_TEMPERATURE', DART will check to see if a specific routine
+is provided for that type, if none exists, the interpolation routine for the
+generic 'KIND_TEMPERATURE' will be used; that way one interpolation routine may
+support many observation types.
+<BR><BR>
+The mandatory header line is followed by lines
+that have the observation type name (an all caps Fortran 90 identifier) and
+their associated generic kind identifier from the obs_kind module.
+If there is no special processing needed for an observation type,
+and no additional data needed beyond the standard contents of an observation,
+then a third word on the line, the <em class="unix">COMMON_CODE</em> will
+instruct the preprocess program to automatically generate all stubs and
+code needed for this type. For observation types needing any special code
+or additional data, this word should not be specified and the user must
+supply the code manually. One of the future extensions of this module will
+be to support acoustic tomographic observations, which will
+necessitate specific support routines.
+</P>
+<H3 class="indent1">ocean variable types and their corresponding kinds</H3>
+<pre class="indent1">
+! BEGIN DART PREPROCESS KIND LIST
+!SALINITY, KIND_SALINITY, COMMON_CODE
+!TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!SEA_SURFACE_HEIGHT, KIND_SEA_SURFACE_HEIGHT, COMMON_CODE
+!ARGO_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!ARGO_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!ARGO_SALINITY, KIND_SALINITY, COMMON_CODE
+!ARGO_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!ADCP_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!ADCP_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!ADCP_SALINITY, KIND_SALINITY, COMMON_CODE
+!ADCP_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!FLOAT_SALINITY, KIND_SALINITY, COMMON_CODE
+!FLOAT_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!DRIFTER_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!DRIFTER_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!DRIFTER_SALINITY, KIND_SALINITY, COMMON_CODE
+!DRIFTER_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!GLIDER_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!GLIDER_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!GLIDER_SALINITY, KIND_SALINITY, COMMON_CODE
+!GLIDER_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!MOORING_U_CURRENT_COMPONENT, KIND_U_CURRENT_COMPONENT, COMMON_CODE
+!MOORING_V_CURRENT_COMPONENT, KIND_V_CURRENT_COMPONENT, COMMON_CODE
+!MOORING_SALINITY, KIND_SALINITY, COMMON_CODE
+!MOORING_TEMPERATURE, KIND_TEMPERATURE, COMMON_CODE
+!SATELLITE_MICROWAVE_SST, KIND_TEMPERATURE, COMMON_CODE
+!SATELLITE_INFRARED_SST, KIND_TEMPERATURE, COMMON_CODE
+!SATELLITE_SSH, KIND_SEA_SURFACE_HEIGHT, COMMON_CODE
+!SATELLITE_SSS, KIND_SALINITY, COMMON_CODE
+! END DART PREPROCESS KIND LIST
+</pre>
+<P class="indent1">
+New observation types may be added to this list with no loss of generality.
+Supporting the observations and actually <strong>assimilating</strong> them
+are somewhat different and is controlled by the
+<em class="file">input.nml</em><em class="unix">&obs_kind_nml</em>
+<a href="../obs_kind/obs_kind_mod.html#Namelist">assimilate_these_obs_types</a>
+variable. This provides the flexibility to have an observation sequence file
+containing many different observation types and being able to selectively
+choose what types will be assimilated.
+</P>
+
+<!--==================================================================-->
+
+<A NAME="OTHER MODULES USED"></A>
+<BR><HR>
+<H2>OTHER MODULES USED</H2>
+<P class="indent1">
+none
+</P>
+
+<!--==================================================================-->
+<!--Note to authors. The first row of the table is different. -->
+
+<A NAME="Interface"></A>
+<BR><HR>
+<H2>PUBLIC INTERFACE</H2>
+<P class="indent1">
+none
+</P>
+
+<!--==================================================================-->
+<!-- Declare all public entities ... -->
+<!-- duplicate public routines template as many times as necessary -->
+<!-- make sure you replace all yyyroutine?? strings -->
+<!--==================================================================-->
+
+<A NAME="PublicEntities"></A>
+<BR><HR>
+<H2>PUBLIC COMPONENTS</H2>
+<P class="indent1">
+none
+</P>
+
+<!--==================================================================-->
+<!-- Describe the Files Used by this module. -->
+<!--==================================================================-->
+</P>
+<A NAME="FilesUsed"></A>
+<BR><HR>
+<H2>FILES</H2>
+<P class="indent1">
+none
+</P>
+
+<!--==================================================================-->
+<!-- Cite references, if need be. -->
+<!--==================================================================-->
+
+<A NAME="References"></A>
+<BR><HR>
+<H2>REFERENCES</H2>
+<P class="indent1">
+none
+</P>
+
+<!--==================================================================-->
+<!-- Describe all the error conditions and codes. -->
+<!-- Putting a <BR> after the synopsis creates a nice effect. -->
+<!--==================================================================-->
+
+<A NAME="Errors"></A>
+<HR>
+<H2>ERROR CODES and CONDITIONS</H2>
+<P class="indent1">
+none
+</P>
+
+<!--==================================================================-->
+<!-- Describe the bugs. -->
+<!--==================================================================-->
+
+<A NAME="KnownBugs"></A>
+<BR><HR>
+<H2>KNOWN BUGS</H2>
+<P class="indent1">
+none
+</P>
+
+<!--==================================================================-->
+<!-- Describe Future Plans. -->
+<!--==================================================================-->
+
+<A NAME="FuturePlans"></A>
+<BR><HR>
+<H2>FUTURE PLANS</H2>
+<UL class="indent1">
+<LI>support acoustic tomography observations - similar to GPS soundings
+in the atmosphere.
+Take a look at <a href="obs_def_gps_mod.f90">obs_def_gps_mod.f90</a></li>
+</UL>
+
+<!--==================================================================-->
+
+<BR><HR>
+
+</BODY>
+</HTML>
More information about the Dart-dev
mailing list